HP Envy 14-k074ca Wireless problem

Hello, I have the HP Envy 14-k074ca and I have a little problem with the buffering when I stream music or video from my LAN and use my WiFi interface. So the music get really agitated and video stop for more buffer. I check my signal strength and I'm up most of the time (bars of signal in Windows) getting 85 to 130Mbps. In addition, it is not network congestion since I put this portable side by side with a macbook air and also my galaxy 3 and they don't have this kind of problem.

I downloaded and installed all the latest patches from the site and begins to be clueless. All advice? I still give myself 2 days to understand the case, I have to go back to the store, something I don't want to because I like especially this laptop.

Thank you

Pascal.

Thanks again. found a way to reset my router to the default settings... pretty weird tho because it worked well with all my other devices.

Thanks for your time.

Tags: Notebooks

Similar Questions

  • Envy 14-K074CA touchscreen: 10 - touchscreen Windows Envy 14-k074ca

    I have a HP Envy 14-K074CA Sleekbook touchscreen.

    I am currently run ning on Windows 8.1 but want to upgrade to Windows 10.

    Then jeutiliser the ability my computer WIDI laptop a lot and do not want to lose it with this upgrade.

    My question: is there a problem with using WIDI and Windows 10 on this model?

    Or are there other serious issues I would meet with this upgrade?

    Thanks in advance.

    Rudi

    Rundl

    new 10 with Intel drivers windows supports WIDI

    have you found the drivers Windows 10 for the system ?

    My advice, wait until February

  • WAG320N wireless problems

    I am having major problems with my Linksys WAG320N. Hoping someone here can help as I am quite clueless when it comes to networking.

    Without changing the settings, the other day that my Macbook Pro could not connect and he kept saying 'timeout '. From that point my iPhone also refused to sign, although access to the internet on my MBP viaethernet was fine.

    I did a hard reset according to the instructions of this forum, and then re-configured with the installation CD. The router wireless light was turned on but my MBP did not see the network. Finally, I managed to connect after I restarted my laptop and enjoyed every 10 minutes without internet connectivity before wireless problem network come fall and now does not appear in my list of networks once again, even if the wireless light is still on.

    Ethernet connection still works, but not via the wireless.

    I restarted my laptop and the router and tried switching channels on the router, all to nothing done. Very confused and frustrated!

    Someone at - it suggestions? Thanks in advance for any help.

    What is the wireless settings you have set up on your router (SSID, channel and security mode)?

    Connect to your router configuration page and click on the Wireless tab and click on the "Advance Wireless Settings" sub-tab and under change 75 beacon interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

    Now let's see if you can locate your wireless network and try to connect...

  • T40 2374-PU3 wireless problems

    T40 2374-PU3 Wireless problems - I tried every driver and followed instructions to install several times.  I was able to install it successfully in the past (about a year), but do not remember with the version of the driver that I used.  Using WinXP SP2 - just installed.

    Help, please!

    Thank you!

    Welcome to the forum!

    Here is your wireless driver:

    http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-42683

    After uploading, be sure to check out according to the instructions on the download page.

    I hope this helps.

  • S10 - 3T wireless problem

    My rig to receive yesterday and fought wireless problems.  Thought, he was my network for some time and found if I close the 3 t of the network works fine.

    The 3 t at this point works well on the network but sometimes slow.  However any TIME that I try to download a file, it works as usual for a while then just dies.

    Stop downloading and it is surfing.  It seems also to kill or slow down the network to a crawl at the same time.

    I tried to update the drivers in Device Manager and it says they are the best already.

    Any thoughts?

    Thank you for your understanding.

    The ends of the ongoing saga I think.

    I went to Burger King this morning and connected to their hot spot and the thing that worked great - downloaded a large file on site.

    Lenovo, I called and they told me to uninstall the software Lenovo 5 ready.  I did and rebooted and it worked fine and still seems to work very well ;-)  They said that it causes conflicts.

    Worked on my unit anyway.  This happens on a platform of Asus here one year, their uninstalled software and it worked fine.

  • HP Envy 4502: printer connection on my laptop wireless problem

    I installed the software on the disc that came with my new HP Envy 4502 printer on my HP laptop. He says that the software is installed correctly, but the printer is not connected wireless. Have you tried connecting via the usb cable and it worked. However, whenever I try to connect wirelessly, it fails to connect.

    I tried troubleshooting tips sevral time but still have no luck.

    My husband was able to insert the disc into his Dell laptop and connect the printer even wireless with no problems at all. This laptop is Windows 7 Professional.

    I'm getting more and more frustrated by the present, thank you I am a novice where computers re concerned, but that he thought that by purchasing an hp printer to go with my computer hp laptop, things would be easy.

    Help, please

    Take a look at this link on the implementation of WiFi.

  • HP Envy m6 wireless problem

    Hello

    I have a HP Envy m6-1207TX notebook PC (product no. D5F64PA #ABG). According to the tag in the battery Bay, it has a Ralink RT3290 wireless network adapter.

    Since the upgrade to Windows 8.1, the wireless connection is no longer working. Small bright blue on the f12 key (IE which indicates that the wifi connection is active) is currently orange and will not change to blue when the key is toggled.

    I checked on the download page from HP for a updated driver for my wireless card, but the brand name for the driver, it is not the network wireless adapter Ralink.

    My ethernet connection works correctly, and all the other devices that I have (for example, iPhone, tablet PC, etc.) can access my wifi without problem.

    Kind regards

    Nick

    Hi, Nick:

    Sorry, that didn't work.

    Try to uninstall the card from Device Manager, reboot and see if Reinstall driver and the adapter works this time.

    If this does not work, then I don't have any other ideas you can try.

    Sometimes you have to wait until enough problems is reported and new drivers are available to fix bugs.

    Best regards

    Paul

  • Want to M6 1225DX: updated HP Envy M6 1225DX wireless adapter

    I'm looking to upgrade the card wireless in my HP Envy M6 1225DX.  Here are a few features on the machine:

    Product # D1E93UA #ABA

    CPU: Intel i5 - 3230M @ 2.6GHz

    RAM: 8 GB DDR3 SDRAM

    GPU: Intel HD graphics 4000

    Wireless: Ralink RT5390R 802.11bgn Wifi adapter

    OS: Windows 7 x 64 (I know that HP does not support this)

    BIOS version: F.26

    The wireless adapter that is currently installed (Ralink RT5390R) only supports SISO and the download speed tops out around 18-20Mbps.  I'm looking to replace this card with a card compatible MIMO and bluetooth, for example a 7260 Intel.

    I read on several forums that HP basically whitelists some cards wireless in BIOS.  I have reviewed the maintenance manual and it has a list of compatible cards I listed below:

    • Atheros WiFi 802.11b/g/n 1 × 1 9485GN and 3012 adapter Bluetooth 4.0
    • Atheros 802.11b/g/n 1 × 1 Bluetooth adapter Combo WB225
    • Broadcom 4313GN 1 × 1 WiFi and Bluetooth 4.0 adapter 802.11b/g/n 20702
    • Module Intel Centrino Advanced-N WLAN 6230
    • MediaTek MT7630E 802.11bgn Wi - Fi adapter and adapter Mediatek Bluetooth 4.0
    • 1 × 1 Ralink RT5390R 802.11b/g/n WiFi adapter
    • RALink RT3290LE 802.11b/g/n WiFi and Bluetooth 4.0 Combo Adapter 690020-001 1 × 1
    • Atheros AR9565 1 × 1 WiFi + Bluetooth 4.0 Combo Adapter 802.11b/g/n
    • Module Intel Centrino Advanced-N 6235 WLAN for the Japan only

    These are the only cards I can run in this machine?  I also read somewhere that HP no wireless adapter like whitelisting in the BIOS, and if that's the case, would a BIOS update fixed this problem?

    I've been watching the 7260 Intel, but I don't know if it would work and would not order it and he has no job.   This adapter could work in this phone or I am I'm confined to the list given in the service manual?  If I'm limited to the above list, no matter what recommendatins to the adapter that will give me what I'm looking for?

    Basically, what I'm looking for in a wireless adapter is:

    • Supports A/B/G/N and AC at 2.4 Ghz and 5.8 Ghz bands.
    • More high speed possible
    • Bluetooth 4.0
    • 1/2 height Mini PCIe form factor

    Thanks for the help

    Hello

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your m6-1225dx HP ENVY Notebook and supported wireless cards. Yes, these are the cards that are supported in your notebook and fortunately will work with your graphics card and processor.  Some say that just restore BIOS to factory default help if you decide to go with your choice.

    You could restore the BIOS withthis document by selecting the reload the default BIOS settings.

    Thank you.

  • HP ENVY 15-171nr laptop PC: Hp ENVY 15-171nr Bluetooth problem

    I have HP Envy 15-171nr notebook pc installed with Windows 8.1 pro. Since the last 2-3 days, I was not able to connect my cell phone to the laptop via bluetooth. So I removed my paired phone and once again tried to pair it with my phone, but I couldn't pair. So I tried to reinstall the HP Recovery Manager bluetooth driver. He was informed that the installation was successful, but after that, there is no bluetooth icon settings PC where I can set on/off bluetooth. There is no bluetooth icon in Device Manager as well.

    Hi there @SVig

    I understand that you are having problems with the Bluetooth on your laptop. Please check the complete product number. I found the drivers for the 15-j171nr, and I want to make sure it's what you have.

    Here's the driver page:

    HP ENVY 15-j171nr drivers for laptop

    Take a look at these pages and see if something helps you all:

    Using Bluetooth (Windows 8) devices

    Why Windows is not find my Bluetooth or other wireless device? -windows.microsoft.com

    Your laptop was also initially running windows 8.1? If this is not the case, the driver in the Recovery Manager would for an earlier version of windows.

  • New HP Envy, loss of wireless connection on download

    I bought a new HP Envy yesterday - tease one with 12 MB of ram and Core I7 so he could handle the challenges, but it seems to be a sheep in a Wolf coat (rather annoying) because it loses the connection Wireless on downloads (especially around 80 mb).

    It connects to new right back to the top, but I can never complete the downloads because I have to restart and it abandons the connection again before the end of the download.

    It is not a problem with the wireless router because my old laptop (an Acer I3) supports downloads and never signal drop.

    The product number is E7A75EA #ABU

    BIOS F.24-08/27/2013(0884100000305B00000620100)

    Driver is an itel and the version is 15.6.1.6

    Please help-

    chrism101 wrote:

    I bought a new HP Envy yesterday - tease one with 12 MB of ram and Core I7 so he could handle the challenges, but it seems to be a sheep in a Wolf coat (rather annoying) because it loses the connection Wireless on downloads (especially around 80 mb).

    It connects to new right back to the top, but I can never complete the downloads because I have to restart and it abandons the connection again before the end of the download.

    It is not a problem with the wireless router because my old laptop (an Acer I3) supports downloads and never signal drop.

    The product number is E7A75EA #ABU

    BIOS F.24-08/27/2013(0884100000305B00000620100)

    Driver is an itel and the version is 15.6.1.6

    Please help-

    Hello

    There are probably buggy 2230 Intel wireless card. Try these drivers for Windows 8:

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & DwnldID = 23169 & lang = eng & OSVersion = Windows % 208% 2 c % 2064-bit * & DownloadType = 20Applications % software

    Windows 8.1

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & DwnldID = 23258 & lang = eng & OSVersion=Windows%208.1 * & DownloadType = 20Applications % software

  • HP Envy 700-406: wireless drivers for HP envy 700-406

    I will be grateful to anyone who can give me a link for the drivers for my HP envy 700-406 which are compatible with linux wireless.

    Thank you for the additional information.

    I highly suggest that you go to www.ubuntuforums.org and start a thread.  They are the experts on Ubuntu and will be able to get an answer to your problem in the short term.  I've never been disappointed by their responses.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • HP Envy 4500: Connect Wireless continues to drop

    Hello to my deep regret, that I recently bought the HP Envy printer. After finally connecting the wireless printer, I find now that I can't maintain a connection for more than 5 minutes.

    The problem does not exist using the chromebook (eprint)

    The only way to reestablish a connection is to go upstairs and turn the printer on the wall, then power off.

    Please forgive my frustration, but at this time, should not be this hard.

    Thank you

    Under settings, Auto Off disabled?

  • My Book 3.0 (1 TB, USB 3.0) detection with envy Phoenix 810-135qe problem

    I have a My Book 3.0 (1 TB, USB 3.0)... The older My Book not the newest one... "My Book Essential" or something like that.

    I used it with W7 x 64 backup utility on an older office of the HP (HP Pavilion a6560t) without problem until my new HP Envy 810-135qe happened. I downloaded the latest drivers from WD support and the PnPed thing very well off the non powered USB 3.0 at the rear of the 810. However, the 810 gives up the connection after sleep, hibernation, lock, or simply over time. I ran diagnostics on the WD and cables, all the beautiful removed. I tried cutting power saving s 3.0 to USB in device (just a guess) Manager, and that seemed to work for a few weeks, but I still have the problem of detection from time to time. All my drivers are up to date on the HP circuit. I completely reformat the WD now to see if that would solve the question somehow (I'll update in the next few days on how that worked).

    Someone has an idea what is wrong? I suspect something with the BIOS. HP chat support has been no help (they go through the same checks that I've done myself) and they got really scary on another cat when I asked about adding an SSD as boot drive (I knew it was a problem of here and other forums)... Set myself to second level support, and all what they told me it is that they could not tell me something... Basically, not support for a config except for how they were shipped because it's a "customized" version (Yes, time to chagrin of the buyer).

    Second, anyone running a similar config with a remote backup that works well? My WD is getting old so I thought one of the more recent portable USB 3.0 hard drives (2.5-3.5). My features to follow.

    HP Envy 810qe - Win 7 (810-135qe)

    Product number: F9A63AV #ABA

    • Windows 7 Home Premium 64
    • 4th generation Intel (r) Core i7 - 4770K processor quad-core [3.5 GHz, 8 MB of shared cache]
    • 4 GB Nvidia GeForce GT640 [DVI, DP, HDMI & VGA via adapter]
    • 12GB DDR3 1600 MHz [2 DIMMS]
    • 2 TB hard drive 7200 RPM SATA
    • MSATA SSD Cache 16 GB
    • Microsoft Office trial
    • The trial security software
    • Blu - ray player & SuperMulti DVD burner
    • 15-in-1 slot Multi Media Card Reader, 4 USB Ports (front/Top), Audio [before 2USB2.0, 2USB3.0 top of the page]
    • No TV Tuner card
    • Integrated sound, Envy Audio; Audio beats
    • HP USB keyboard and optical mouse
    • HP Wireless 802.11 a/g/n with Bluetooth (R) (2 x 2)
    • Envelope of Wineskins HP Home & Personal store

    I moved... I tried updating the BIOS and implement a server/cloud storage media a router more than capable of handling, but it is always odd. Thanks for the replies OG.

  • Scanner model HP Envy 120 series wireless

    I have a HP Envy 120 series printer / scanner, wireless. I can print and scan with all my software except when I go to my bank site to deposit a check, it does not recognize my scanner. What can I do to solve this problem. I downloaded the last Java which would recommend the Bank still does not work

    Hi mij1,

    I understand that you have a 120 Envy that works very well with the HP software, but does not seem to be recognized by the software/site of your bank. I will certainly do my best to help you!

    Because the printer works with the HP software we know that is not the printer itself that does not work, but there is something maybe on the Bank's Web site does not properly. I suggest that you try another web browser (if you are using Internet Explorer, try Firefox or Chrome), make sure that all of your Windows updates are completed (if you use Windows), make sure firmware is up to date of the printer and if all else fails try to install the printer through the USB port as opposed to the radio.

    If the printer is not always recognized after these steps, you will need to contact the support of your bank to see what their Web site.

    Hope this helps, have a nice day!

  • HP ENVY losing dv6 wireless connection periodically.

    Hi all

    First of all, thanks to all those who wish to, or be able to help with my problem, I appreciate the help.

    I bought a laptop HP dv6 ENVY of Costco today, running Windows 8, Atheros AR9485 map and the connection to a Belkin Surf N300 Wireless N Router - Model v3 # F7D6301.

    My problem is, in the last 6-7 hours of use, I lost the connection 3 separate times. The first two times was quite brief, lasting a few minutes. I closed the Application in Internet Explorer and reopen and try to connect again, worked fine. The last occurrence, however, lasted 15-20 minutes and eventually resulted in me just hard wiring.

    I'm brand new on HP and Windows 8 computers together, so I don't know where to start first. I searched on the web and on the forums here, but haven't found a solution.

    I uses the wireless router (wired) everyday for my Xbox 360 and rarely, or never, has connection problems.

    Please let me know if I can provide more information / information to help get the problem solved.

    Once again, thank you!

    Hello:

    Check the driver version in Device Manager and if it is earlier than below, see to install the latest driver for the card your laptop wireless helps.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&swItem=ob-113567-1&prodNameId=5229457&swEnvOID=4132&swLang=13&taskId=135&mode=5

Maybe you are looking for

  • Equium is not lit

    Hello I press the power button on my laptop and it turns off before initiating the operating system (a few seconds) as if the battery was dead. I tried to start with the battery removed, when I plug the DC power LED on the front of the laptop shows i

  • EliteBook 8560p: laptop does not start

    My Elitebook 8560p unbootable. It only shows the HP logo. It has 10 (64-bit) Windows installed. The problem started 24.9.2016.

  • How to transport photos from my laptop to my camera?

    HOW CAN I MOVE MY PHOTOS FROM MY LAPTOP TO MY CAMERA? Thank you

  • Install XP Pro on a nc8430

    I try to install XP PRO on a computer from Compaq nc8430 and have had the same results with 2 different drives. The status line shows all first, there is a 300 GB drive, then it passes to 3.9 GB. It is with the SATA Native mode disabled in the BIOS. 

  • Cannot delete the file due to permission problem

    I can't delete files because I said that I don't have permission. When I try to change the permissions, I said I can't.