3 beeps after startup chime then nothing
Hello
My iMac intel (2011) was working fine earlier today. Then I came back to find it on the gray screen with the apple logo. I tried to restart it, and it became stuck on the gray screen with three loud beeps, after initial startup Gong.
I tried resetting the PRAM, re-sitting my RAM (it's the RAM of origin). It does not start in safe mode.
I used the built-in Apple hardware test and it has detected an error with the following message:
4MOT/4/40000003: DRIVE HARD-1268
I ran the test again and got the same message error but with 1283 rather than 1268. Is it a hard drive failure?
Any ideas how to proceed? Thank you.
The error is specifically for the hard drive fan motor, but as the fan is controlled by a circuit in the HDD it is more than likely a failure of the hard drive. I saw most of the errors 4mot have had a faulty hard drive.
Tags: Mac
Similar Questions
-
Re: Satellite A200 - sound beep after startup
Hello world
Recently my laptop has started to be malfuntioning.
Yesterday, after the start (or when you take it out of fashion 'sleep'), it started beeping.Beep, it's 10 minutes in a row, fast.
I run a stock standard Satellite A200 Windows Vista Help.
I don't know what to do, and over the ringtone (which lasts about 10-15 minutes) I can't do anything - the CPU (I think) simply cannot handle all of the processes. The ringtone comes from the right side of the laptop and is fake, but certainly a sign of a problem.I believe it has something to do with the motherboard, but I don't know how to diagnose this problem, and after hours of research I have not found someone with a similar problem to mine.
I'm sorry if I posted this in the wrong forum, also the advice to confused and I just can't find a support technique one.
Help, please
Victor11Hello
If I understand your problem, it seems that you are not able to enter the BIOS and you are not able to boot the operating system Window.
You don't see that the home screen Toshiba so is good?Hmm, it seems that this sound signal is related to a hardware malfunction
Then maybe the POST (power on self-test) cannot be spent properly and so you get this alert beepWhat to say; in most cases it mother s associated with, but it is difficult to say which could be exactly wrong
Maybe you can try this;
Remove the battery and unplug the power adapter for a few hours
Wait and after a while connect the two parts again
Then try again to turn the unitIf this does not work, then I would recommend asking a technician help in ASP.
-
Pavilion 753n beeps at startup and does nothing
I got this HP Pavilion 753n to rehabilitate and give it to someone who needs a PC, but during my inspection, I realized that it does not start.
He made the long beeps and nothing shows up on the monitor.
I checked the memory, CPU, and other items to see if I find something loose or unplugged, nothing obvious.
Where I start this PC problems?
Thank you.
1st prize goes to Nishant Soni and who else agrees with him or her.
Was memory.
Thanks a lot for your advice and help everyone.
-
Satellite P300 - 13 M - beeps at startup
Hello
My laptop now and then beeps at startup and then I get a black screen (and can't do anything)
The beepingsounds goes as follows: BEEEEEEEEEEEP BEEP BEEP (1 x long - 2 short)Anyone know what this could be?
It is very annoying when I want to show my client project and all of a sudden the laptop no longer works...
Thnx in advance
Raey
Hello!
Beep codes mean that there is a faulty hardware component.
It's not easy to tell what is the reason for this, but in your case I would try to exchange the RAM.If it doesn't work you should contact an ASP and ask for help. Technicians can check your laptop and exchanging all the necessary parts.
On the Toshiba site, you can search the nearest ASP:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversGood bye
-
Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first green light solid, quickly followed by amber is more solid, which turns off and then nothing? I'm not in the airport or if directly connected to the Macbook air utility. It is running the latest firmware, updated 7 days ago and everything was fine until now. Tried both a soft and a hard reset factory but still nothing, but the same brief glow only after restarting each time before going dark again? Any ideas if it can be fixed or if it's as I read elsewhere dead now?
Thank you
Any ideas if it can be fixed or if it's as I read elsewhere dead now?
He died... the fact that the main witness turns off is unusual in this model.
It is common to the next... A1409 (gen4)
What happens in the Gen3 is normally a few deaths on the Board... or a bunch of capacitors is low...
If yours is a very fine introduces Gen3 just before Gen 4, it is possible that the same fix on the Gen 4 could work.
I found early Gen4 may fail as Gen3 but must admit that I am yet to see the Gen3 with welding problems.
I doubt repair is worth it. The Gen3 is now about 6 years... give or take... This is way beyond the standard lifetime of a TC.
If you want to play, I'm happy to help you... but I would not spend money on it.
-
Since the upgrade to 12.0, I am only able to do a Google search. After the initial search, nothing happens when you try to make another. I have to close the browser and reopen it to each search. Any ideas.
Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker.
A few other basic problems you can try things is the following:
Run all Windows updates, install all required service packs, etc.Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers.
Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.
Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.
-
When I turn on my PC or after mode 'sleep' my motherboard will load but then nothing else... White screen. If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.
I have this pc for 3 years. My system was full of unused and unwanted programs, so I rebooted to Vista, deletted all my old files that Vista had moved into the "old." This is when I started having this disorder.
(I made this process more yet to see if it would help with no luck)
My first thoughts were video driver... downloaded the new drivers 3 times. scanned all the other drivers for updates ect. nothing seems to help...
Anyone have any ideas?
Thank you
Dave
I have
I was able to download these files. Rthl64.sys point - one component of your network cable in pictures device driver memory. Interestingly, the dates of the 2006 pilot (Rtlh64.sys my Sep 26 07:20:23 2006 (45190CF7)), so it's most likely your problem. Follow these steps:
-Download a new copy of the software/drivers on the website of Realtek here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2
-Uninstall the current software/drivers on your system
-Install the newly downloaded drivers
-Monitor for more BSOD
Here is a summary of the BSOD:
BSOD BUGCHECK SUMMARY
By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
The debugging session: 16:23:07.947 Sun 31 Oct 2010 (UTC - 05:00)
System Uptime: 0 days 13:18:38.380
WARNING: Unable to verify timestamp for Rtlh64.sys
ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
Probably caused by: Rtlh64.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0X9F
Nom_processus: System
Code 0000009F error checking
Fffffa80 00000000 00000003' arguments'03de3a30 fffffa80 '05bf1050 fffffa80' 072dc010
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
The debugging session: 22:49:49.007 sat 30 Oct 2010 (UTC - 05:00)
System Uptime: 0 days 5:12:31.440
WARNING: Unable to verify timestamp for Rtlh64.sys
ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
Probably caused by: Rtlh64.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0X9F
Nom_processus: System
Code 0000009F error checking
Fffffa80 00000000 00000003' arguments'03def060 fffffa80 '05bdf050 fffffa80' 04aeb2d0
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
By: 6001.18000.amd64fre.longhorn_rtm.080118 - 1840
The debugging session: 21:48:58.144 Wed Oct 27 2010 (UTC - 05:00)
System Uptime: 0 days 9:49:32.487
WARNING: Unable to verify timestamp for Rtlh64.sys
ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
Probably caused by: Rtlh64.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0X9F
Nom_processus: System
Code 0000009F error checking
Fffffa80 00000000 00000003' arguments'03a1ca30 fffffa80 '05-99050 fffffa80' 039c8c60
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``-John ( http://www.carrona.org/index.html )
-
Hello
I'm having the problem that my Photoshop CS6 always crashes soon after startup. I use no plug-ins, and my PC is in good health. I would like to present a crash log if someone can tell me what the problem is, but when I go to 'Help-> Adobe product improvement Plan' that I read is where crash logs are produced nothing happens.
I also have a question my Premiere Pro hangs at startup upward. I have these two programs were widely used in the past but have recently started having problems. I have already uninstalled and reinstalled CS6, but the problem persists.
Any help would be massively appreciated.
Chris
Thank you. The crash log tells me that you have not updated Photoshop CS6. It should be 13.0.1.3 not 13.0.0.0
Either run help > updates or download and install it. Adobe - Photoshop: for Windows
ig75icd64.dll is a display driver. Go here and to update: Intel® Driver Update Utility
-
Used for Adobe Pro XI, after download download manager a screen asked the English language, said yes and then nothing, no installation... help Windows 7 x 64
Hi nucar,.
Once Adobe Download Assistant is installed, you can start at any time and choose a product to download at the bottom of the window. Updates list as new products will be available for download with Adobe Download Assistant.
Otherwise you can try to download from direct download links available at: download Acrobat products | Standard, Pro | XI, X
Kind regards
Rave
-
MacBook Air mid 2009 3 beeps at startup
Hello world!
I had a problem: after a few hours of videos online watch my book mac freezed with sound fixed.
After that I pressed the power button and shut down the computer. After evil market see black screen and hear 3 beeps.
Also: I have used all the key-combination to repair the situation, problem still there.
P. S.
ALT-CMD-P-R - give me long 3beeps - 3beeps short - long 3beeps
And now I want to try a version:
"Same for me here.
My MacBook Air mid-2011 with 4 GB of RAM would be only 3 beeps on startup.
"Put the logic card 8 minutes in the oven at 190 degrees celsius - was again very well then begin."
of https://ru.ifixit.com/Answers/View/27783/3+beeps+on+start+up
Dear Mac users, if you have and idea to fix my mac - please enter into this discussion.
Good day!
Problem with RAM.
https://support.Apple.com/en-us/HT202768
Please contact Apple.
-
Portege Z835 frozen at startup but now nothing
I have a Z835, only 4 months but now frozen to screen "starting Windows."
MS Windows logo was lit in his charming way, but I can't go any further.
After that, I can only make a hard stop using the power button.
The laptop worked well for 3 months, but now nothing.
I have to admit that I didn't create a restore disc, so, to a degree have myself to blame.It was purchased in the United States and I live in Mozambique where support because it does not exist.
I can get to the configuration screens using F2 at startup - but then they seem to not make any difference and I'm not sure what I would do here anyway.A COMPUTER store tried to re - install Windows 7 from an external drive, but it would also not go further.
I would be very happy if someone has an idea!
Thank you
David WoodHello
To me, it seems that the system cannot be started.
This can have several reasons: it is possible that your HARD drive is faulty or there is something wrong with the preinstalled system.So what to do?
I think you should take your recovery disc (I hope that you have created this disc in the past) and try to reinstall the system.If this is NOT possible due to a hardware problem, well in this case you need extra help a service guy
-
Windows XP Home edition does not charge up - screen Toshiba and then nothing
I opened my computer to stand by earlier. And received an error message such as:
WINDOWS CANNOT CONTINUE RUNNING BECAUSE THE FILE IS DAMAGED AND UNREADABLE...
Then he had a countdown until it restarted. After the computer restarted (loads of screen toshiba upwards) then nothing happends. I managed to get into the safe mode start page, but when I select start in safe mode, it does nothing, actually freezes. Seems that the problem is with XP.I also tried to "last good configuration" but who also refuses to load.
I can, however, in the BIOS.The black and white background writes startup screen that flashes briefly upward when after that the toshiba screen doesn't even come to the top.
I have a P100-429 Satilite using XP SP2 (or 3) does not remember.
Is this a hardware problem? I lose data?
I am aware that my system was clean and I was using a good anti-virus.
Please please let me know if you have any suggestions or comments.
Thanks in advance, Max...
Hi RisSsky,
you are in a deep deep sh... t... No. not really...
Looks like the filestructure hard disk is damaged.
the hard drive is recognized by the bios? means, it is listed as a device?
There is a sound of the hard drive? scratch or buzzing or ticking?CHKDSK may help, but I would 'safe mode' where you want not to lose data on disk.
don't panik, we will do things.
2 options to solve this problem:
the first and save:
-Remove the old hdd (you need later)
-get a new hard drive and make a recovery/installation on the new drive.
-also get a usb - hdd connector to access old data hdd and copy on the new disk.
or the 2nd:
-run chkdsk on your hard drive, maybe you need to do this with a "live-system-on-cd.
Be aware that if there is a problem it will get worse...
-start in safe modeIf you're lucky, the 2nd option will do.
as said before I'd do it "the safe way. -
long beeps after installing the video card
Hello
I recently bought a HP 500-223w.
I wanted to install a power supply a video card.
Here's the problem: everything works fine without the installed video card.
If I install the video card then at startup it gives me a series of long beeps.
I turned it off after the long fourth beep assuming they would UST go on and on.
The power supply is more than enough to power the video card.
The video card should not be bad, because I just moved it from another system. (system currently does not, bad mobo)
I was wondering what the infinite long beep on startup?
Thanks and regards, TJames.
Hello:
Product for your PC specifications indicate that it comes with Windows 8.1.
To install a video card no HP on PC shipped with Windows 8 or 8.1, you must change both settings of the BIOS before installing the card.
Please see this document for the BIOS to change settings...
-
Unable to connect wireless, said authenticate then nothing happens
I have a windows 7, my problem is that my computer is connected to a wifi network in any place except my home network. I don't know that there is nothing wrong with the router, the modem, or the password to all other computers that operate normally. So when I try to log in, it say authentication then nothing happens.
Original title: problem connecting WiFi,.
Hello
1 did you changes to the computer before the show?
2. What is the full error message?
This behavior can occur if the Enable IEEE 802. 1 X authentication for this network check box is selected. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.Please follow the methods and check with the question:Method 1:
Disable authentication IEEE 802. 1 X
To disable authentication IEEE 802. 1 X, follow these steps:
a. Click Start, type ncpa.cpland then click on Enter.
b. right click on your Wireless network connection and then click Properties.
c. click the wireless networks tab.
d. under preferred networks, click your Wireless network, and then clickProperties.
e. click on the authentication tab, click to clear the Enable IEEE 802. 1 Xauthentication for this network check box and then click OK twice.Method 2:
To remove and re-create the wireless network connection, follow these steps:
a. Click Start, type ncpa.cpl, and then press ENTER.
b. right click on your wireless network connectionand then click Properties.
c. click the wireless networks tab.
d. under networks Favorites, click on your Wireless network and then click on remove.
e. click on view wireless networks.
f. under management of the network, click refresh the network list.
g. under Choose a Wireless network, click the wireless network to which you want to connect, and then click on connect.Also I recommend you to update the NIC drivers and check.
Method 3:Put the computer to boot and search for the issue.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.Method 4:Uninstall and reinstall the NIC drivers and check with the question.a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.b. right click on network adapters, and then click on uninstall and restart the computer.c. after rebooting, install network cards and check with the question.For reference:Wi - Fi and in Windows network connection issues:
I hope this helps. -
macOS Sierra hangs after startup
I have a macbook pro 15 inch mid 2014 retina
After that I installed macos sierra my macbook freezes after startup for about 10 min before things become normal after shots completely from the OS, I tried the P + R command cmd startup items cleaning + option and I checked the ram which is normal usage, but none of the above has worked
It seems that this problem also affects slightly the time of normal startup of windows on one present on my bootcamp
Stop
Disconnect all external devices
Restart in safe mode
Try safe mode if your Mac does not end commissioning - Apple Support
then restart normally, yet disconnected devices.
If the problem persists, you can view a report of etreceheck for later analysis
www.etrecheck.com
Maybe you are looking for
-
NBA 2 K 16 for Apple TV freezes white screen
I have NBA 2 K 16 for my 64 GB Apple TV 2 and have had problems with the application. The current problem is that the application crashes after the homepage with Harden, Curry, and Davis players featured. I deleted the game and re-uploaded, and it al
-
Tecra A9-150: speakers mute when plugging in headphones
Hello Recently, I bought my laptop Tecra A9 - 150 company 3, which all have the following problem: Plug the headphones into the headphone does not remove the built-in Laptop speakers. In addition, no sound on headphones. Is it a hardware problem or d
-
Satellite A665-S6054: backlight keyboard and Fn + z accessibility
Hey guys I came across a problem which then lead to another Firstly I have updates have been made to my computer but only recently have noticed that the Fn + z does not control my backlit keyboard more Seeing that all the other functions (that I know
-
coupling in ios 9.1 Bluetooth
My heart rate monitor Polar Bluetooth will pair on my IPAD or IPHONE 6 since the update to IOS 9.1. It is connected to a Samsung Galaxy with no problems. It worked fine in IOS 8 but since the update he has not yet seen the device. It is clearly a
-
Original title: I installed a windows update and all of a sudden I can't connect to my computer using my password it says error data is unstable with microsoft It says the software licensing service reported that the license store contains inconsiste