3D without shading image optimization

Similar Questions

• Image optimization forget its image after resizing

  I have a VI that uses an image control that resize as the window resizes.  The problem is the image clears most of itself when it is resized.  I have deduced that this happens because I erase first deselected.  After resizing, only the last draw remains visible.  See the example attached to better understand.

  I wonder if there is a way to remember.  Or a way to get the image data, so I can "redraw" he after all resize, without actually redrawing.

  Any suggestions? Thank you

  
  

• Bearings without an image swap

  Hi there - I would like preamble saying that I already have a good amount of research on this topic with no result and I use the pool of shared knowledge as a last resort before I handcode all just this in CSS.

  I wonder if I can implement some sort of effect of substitution for my site in fireworks without a swap of the traditional image. Rather, I just want to change the background color of a div (or what will be a div after that I have cut it and export all CSS/HTML).

  I hope I'm explain.  I guess that, normally, I would do something like -

  normal state

  .cool_div {background: #333333}

  State Overview

  .cool_div {a: hover {}}

  background : { #778A 63}

  }

  Does make sense? I would basically Fireworks to set up automatically instead of considering it a reversal of the image. I'll have to handcode this? Not a big problem, I was wondering of fireworks offers this kind of compatibility.

  For now, the only way, using Fireworks CS4, export an effect of substitution using div and css tags, is to use the 'Link' to the HTML of the common library (only of the text). You must change the exported more css file to get an effect like the change of context.

• Satellite Pro P300 - how to get the original without media image?

  Hello

  I received a Satellite Pro P300 and there the for win xp recovery disk, I would go back to the installation of Vista pre installed if possible.

  The recovery on the hard disk partition is not available, so I guess, that it cannot be recovered. Is it possible to buy an original image?

  Liam is just that Win 7 is better than Vista OS.
  So if you have the ability to install Win 7 I recommend doing this instead of Vista.

  However, the Toshiba recovery disc contain only the Vista OS.

• Timing of image optimization visibility

  I'm trying to control 3 image controls in my program. I would like to make a visible, and then hidden, make the second visible then hidden and so forth. Each on would have turned off in timed. I tried setting up a structure flat seq and a Boolean value of wiring to the visible property of each image control node, but it seems never to turn off and make it not visible. Thanks in advance for the help.

  Hi ice machine,

  Yes, that sounds good. See the attached example, it works with LEDS, but technically it's the same thing.

  Mike

• How to use mesh to 3D image optimization

  Hello world

  I'm trying to draw a 2d object in a 3D picture control.

  The 2d object is a type of polar trace data, contour is variable depending on the data set. I want to display in the control of the 3D image, always in 2D. In my view, that the mesh is the solution. But I can't draw anything in the control of the 3D image. Can anyone produce a small example to show how to draw a polygon mesh into a 3D picture control, where I assume that the points on the polygon can be any number.

  I am very new to 3D in Labview picture controls, never needed before. But I managed to produce a nice 3D environment in the control of the 3D image, just stuck on that one aspect.

  Any help is always welcomed and thanks for your time to support this amazing forum!

  James

  Attached, is an example that I put in place.  Nothing is not clear or if you want more explanation, let me know and I'll do my best

  Jeff Peters

  LabVIEW R & D.

• Save 12-bit without imaq image

  I saw this http://forums.ni.com/t5/LabVIEW/Store-a-12-bit-gray-scale-image/td-p/566500

  and began to worry, because at the beginning, it has been indicated for 12/16-bit gray-scale, you must use IMAQ.

  I do not have IMAQ, but I have 12-bit grayscale images generated by ThorLabs camera - what can I do?

  ... what I have accomplished so far with this:

  

  ... is to get completely distorted images.

  Alessandro

  • Use OR-IMAQ to acquire digital analog, parallel, Camera Link cameras; (Free) OR smart cameras
  • Use OR-IMAQdx with USB3 Vision, GigE Vision, IP (Ethernet), IEEE 1394 devices (requires a license)

  I don't remember exactly what is included in that (or if you need the vision development module and not the acquisition of vision module), but you should be able to download it and try it

• Image optimization eat a huge amount of memory

  Hi all

  I use an image in my VI control comes to display an image to the user.

  The image that I am inserting in the image control is about 100 KB.

  But, the amount of memory, it takes the disk is about 10 MB, which makes my very slow running program.

  Why the control takes so much memory? What is the cure?

  Thank you

  Ritesh

  It doesn't matter what size the image is on the screen, LabVIEW is always load the entire image in memory to display it to a much smaller size.  So, you should be better placed to determine the size of image you want to use and allows you to resize the images to the size that you will actually use a photo editing program.

  You can also dynamically load images in files.  This will prevent the VI to become bloated on the hard drive.  It's not decrease the amount of memory used by the program during execution, because images should always be loaded into memory to display.

• Update CAN´t SRW2024 to firmware 1.2.2 without boot image "runtop_boot - 101.rfb".

  Hello

  I need a little upgrade to a SRW2024 assistance to the latest firmware.

  I started with the upgrade to v.1.2.2, but just started switch to reboot all the time, I flashed back to 1.0.0.86 xmodem console.

  On the FAQ of Cisco theres a guide how to change the SRW2024. The guide says that I have to update the boot image before flash image, but the boot image is not available on the download section of cisco´s more.

  Can you please help me with the boot image. (runtop_boot - 101.rfb)

  Thank you.

  Hello

  I hope you called the HWC, since they have not yet responded to this request.

  http://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html

  Best regards, Dave

• Licensed wrongly without selecting image

  I have this happen twice now - all browsing images Adobe Stock Internet Explorer begins to act erratically and suddenly I find a picture never selected is now 'license' in my library. Later a (#90132365) was not even one that I never wanted. With no direct support for this sort of thing, my only option is to post in this forum.

  What the hell kind of Stock Image site is this?

  Hello

  I apologize for the inconvenience.

  I suggest you use another browser if Internet Explorer does not work very well.

  Also, there are different buttons to download the preview of the image and for the image of the license.

  As a gesture of goodwill, I added a credit to your account.

  Hope that helps!

  Kind regards

  Sheena

• I installed on a computer with lightroom lightroom cc 4.  When I start lightroom cc he wants to combine old images and I want to have this new version without old images.

  Don't want old lightroom 4 images imported again lightroom cc

  You can use the menu file-> new catalog command; or simply say Lightroom CC do not update the catalogue Lightroom 4.

  If I could give some advice, normally the best procedure is to have all your photos in a single catalog, rather than starting a new catalog to an arbitrary point in time when you buy a new version of Lightroom. A catalog has many advantages, including the ability to find and make use of all your photos and almost no disadvantages. Several catalogs average you can't find and make use of a few photos that are in your new catalog and a few photos that are in your old catalog.

• Clip will not accept a transition centered without duplicate images

  I just changed for Vegas Pro 12 first, so I'm still unfamiliar with the first. For some reason, one of my videos has grayed out of corners on the timeline and does not accept the transitions between himself and the clip of seizure. I have no idea why the video is differently and he could not find what I was looking at on the thing to support transitions, other than knowing WHAT goes wrong. no idea why or how to remedy.

  The gray area is an indication that you have reached the end of the clip, no more frames.  For a proper centered transition, you need images after the end of the element in the sequence.  So swallow your end point of half of the duration of your transition.

• Image processor without closing Images

  When I use the bridge image processor, I specify that I want to process the images selected in Bridge, save it as a PSD and execute a set of actions.  The files get saved in a PSD file, but they do not get closed, so they remain open.  This slows down the process of dramatically and he used to close between them, as it should.  Any help in getting it to close files after their treatment would be useful!

  Thank you!

  Jamaica

  Increase the number of States in history to exceed the number of steps in the action (included nested actions), and the problem should go away.

• SWF Image optimization

  I'm working on a project where many of the design elements and controls contain mx:Images with common attributes from source. In the Flash Professional work environment I would use these images as instances of MovieClips, which only need to be referenced when compiling (as I understand it), do not get bogged down the load time for the swf compiled. When I run my application flex in debug mode, I see that each image swf is decompression individually as the application initializes. Decompression is almost instantly on my local machine, I imagine that this will significantly reduce efficiency when I put it online.

  So my first question is this; Is my hypothesis on decompression time a performance of 'responsibility' precise? And if so, what is a more efficient way to load a copy of the image in memory that I can reference all the different components that use it throughout the application?

  Thank you ~ Benny

  You can integrate the image as a class, and then use it in any tag attribute source.

  Look in the help documentation under "Embedding types of assets.

• What is the best way to move a LR2 catalog without moving images?

  I have several catalogs on different drives and I now have a drive much more and have decided I want to keep all my catalogs on a disc under a folder called lightroom catellogs.

  Can I just move my .lrcat file (s) and associated to an extract or folders to the new location and wait for LR2 works fine when I open the newly moved .lrcat file?  Or are there hidden files or paths coded hard directory inside the .lrcat which could cause problems if I did?

  Mike,

  I moved the catalog files several times without problem.  I suggest you copy the catalog folder and all its contents to the new drive, without deleting the original. Make sure that Lightroom is not running when you do this.  Then open Lightroom all holding the key OPTION, and you will be presented with a pop-up allowing you to select the catalog file in the new location.  Once you select it, Lightroom should work as before.

  So go ahead and delete the previous Catalogue record.