3rd party Internet Security disables the CD on Satellite A30 player

Similar Questions

• Uninstall 3rd party internet security program

  I have been running ca internet security 2010 and got a notice of subscription expirerd, had trouble trying to get do I panicked and tried to uninstall, did not work with add/remove or uninstall program, in order to stay on the net with any so what protection I installed Windows security essentials? How can I me 2010 win xp pro. For me, it's a scam, I receive emails on how and which must reach for help and get page not found error, etc., as I lost a solitary icon? This Bull... lasts for a week, I got so far as to pay for the renewal, but it does not have.  What to do?

  Hello

  Follow these steps.

  Method 1.

  1 - click on 'Start' 'All programs' and to highlight the "CA Internet Security Suite. In the drop-down menu, choose "Uninstall CA Internet Security Suite." Momentarily, a uninstall wizard appears on the screen.

  2 - check that you want to remove the program from your computer.

  3. choose 'Yes' when asked if you want to remove all the files associated with the program. The uninstall wizard will now begin to remove the program.

  Method 2.

  Start the computer in safe mode and then follow the steps in method 1.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 3.

  How to manually remove programs from the add tool / remove programs: http://support.microsoft.com/kb/314481

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

• Cannot activate the WLan on Satellite A30 card

  I have a satellite A30.
  In the manual, I had with the laptop it says that some models have a built in wireless. My computer has an on/off switch for the wireless, but I was not able to activate it.

  How will I know if this model wireless connection will work.

  I downloaded the drivers of this wireless Web site. After having unpacked the file, I found that there is no installation instructions or an executable file.
  What I do with the unzipped files.

  Just a note, I have a belkin wireless router and my laptop computer A30 wireless for now but I need an adapter big clumsy network plugged into a USB port

  Any help appreciated

  Thanks Mark.

  Hello Mark

  First, you must be sure that your camera comes with the wireless network card. You can check this on two tracks. The first is to check the underside of your laptop. Each camera comes with WLAN card has sticker WLAN. Otherwise you can check the entries in the device under network adapters Manager. If the unit has WLAN card that it will be there.

  As far as I know the WLAN for Satellite A30 card is optional and if the device has no card on board you can buy a compatible or use external as WLAN USB stick cards or PCMCIA WLAN cards.

• Internet Security recommended the new iMac?

  I just bought a new iMac and does not see the suggested internet security applications. I used Webfoot on my Windows PC, but no one has mentioned get the software for the iMac. Is this necessary? Recommended?

  You do not need or want third-party security software on a Mac because they do nothing useful and usually work against the operating system, and slow down your computer to a crawl. That said, you need to use safe computer practices of good sense. Do not click the pop ups, do not download anything from questionable sources, PAY ATTENTION to where you click, maintain the OS X to date and don't junk it upward with unnecessary third-party utilities that claim to speed up, tune up, optimize, protect, or clean your Mac.

  This isn't windows... just say NO!

• AVG Internet Security maintains the 'blocking' Windows updates

  I am running Windows XP Home SP3 on my machine. I recently pushed a rootkit/trojan infection. My AVG Internet Security v9 is running and updated very well... something which it did in a month because of the infection. My Windows Firewall and automatic updates are enabled. (Which is also disabled during infections). I went to the Microsoft site and downloaded/installed the critical updates 43 (the infection had turned off automatically updated). However all the time I download and install the updated my AVG kept popping up with a deadlock message:

  'au.download.windowsupdate.com/msdownload/update/software/crup/2012/07_467626d3805abcce3d926b85d8928a20d5edc05b.exe '.

  (I continued to close the notification window and download or install updates. Each of them went through).

  My Windows security shield has an exclaimation point on this subject.

  Is it is a sort of conflict between AVG and update of Windows?

  Please HELP... it makes me craaaaazy since it appears every 20 seconds or so!

  Thank you very much

  LuniLadi

  Anoop P K,.

  Thanks for the suggestion on disabling the antivirus! I didn't turn off the whole program (which would be 'reisdent shield' on AVG). I have disabled the internet part (shield online) since it pops up constantly during the update downloads.

  Sure enough... that did the trick. Updates downloaded and installed.

  This part of the virus program is turned back on.

  So far so good. Automatic updates seems to be to download and install without any interference of AVG Internet Security.

  Thank you for taking the time to help.

  Doreen

• Norton Internet Security and the latest Windows updates

  Why my Norton Internet Security 2010 product stopped chasing the latest updates Windows Automatic (9 total)?

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  See you soon.

  Mick Murphy - Microsoft partner

• SRM + SQL + 3rd party replication and suspend the DB

  Gentlemen

  What can the SRM to ensure customers a SQL VM running on (and replicated by) 3^rd party storage is applied consistently? The HP SRA has code that can invoke the suspension in the virtual machine? Or is there some kind of way scripted as part of SRM, that a quiesce DB in the virtual machine can be triggered in tandem with or just as a LUN replication occurs?

  I know that HP is responsible for the ASR - but in these situations, we sometimes get caught between vendors. Looking for experience "How have any other mission critical SQL resources protected using 3PAR and SRM".

  In other words:

  We are looking for assistance with a DR implementation for a specific application of SQL. The app is on virtual machines running on 3PAR storage. We bought all the necessary "3PAR suite application licenses" and then also have VMware SRM.

  We are more concerned than LUNS replicated DR on-site production (LUN will be virtual computers hosting SQL data storage I assume) will be fully SQL-compliant (i.e. better than crash-consistent), during replication.

  We have some experience with 3PAR replications - but to my knowledge have not yet worked with the application suites.

  Question - anyone can describe what role (if any) suites of applications 3PAR can have in correctly the suspension SQL running on a virtual machine that is on a LUN 3PAR? I don't know we can do this medium - seems that we will have to use RDM (or vVOls if they are compatible SRM) be properly suspended the DB. Is there a HP storage agent that can run on a VM SQL in order to coordinate with the table when the underlying LUN snapshots are performed?

  You are right. Consistency in the application will have to be managed at the level of the array. Some providers of table (I know NetApp specifically) offer the ability to place an agent on the VMS and this agent to use the table to ensure uniformity in the application, I'm not sure of HP.

  Another option that you might look at is vSphere replication. VR offers quiecing VSS (with JEREMIAH) in native mode.

  If you are looking for a specific response to the use of replication 3PAR application suites I suggest you post to a forum of HP. vVOLs are not yet compatible with SRM and I do not see how RDM you will get what you are looking for.

  Finally, how you deal with your post, I would say that you do not assume that only men participate in this forum.

• How to disable the pop up "Windows Media Player cannot download the information on the media... "after the extraction of a CD without activation of network connectivity.

  When I copy a CD with Windows Media Player, I get the message pop up after the investigation period is over: "Windows Media Player cannot download the media for this CD information. The other titles, artist, and album will be identified as "Unknown" in your library. For best results, connect to the Internet or manually add media for CD information. »

  I know that the message appears when I turn on the setting to allow WMP to connect to the internet to get information about the media, but I don't want WMP does. What I want is a button I can push on the pop-up that says "don't show this message again" (similar to the warnings seen in internet explore). How can I disable this pop-up window without activating the internet connection option.

  In case you're wondering, the data from the internet are incompatible in the naming convention so when I rip an audio book, so I can listen to my mp3 player, I can't completely post-processing script because not all of the disks in a set have a coherent on the slopes or even name the disc etc. At least drives marked 'Unknown' is consistent and so easy to script for the reduction to a single MP3 file.

  Hello

  Do the following and see if they help.

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  a. start Windows Media Player. Right click on the toolbar at the top, select 'Tools' and select 'Options '.

  b. Select the "Privacy" tab uncheck all options in the tab.

  c. Select the 'Network' tab uncheck all the options in this tab as well. Click on 'OK '.

  d. click "Start", select "Run" and then type "regedit" in the appropriate field. Press "Enter". Click on "File" and "export." Type a file name of registry backup that you can remember, which contains the current date. Navigate to the registry key "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\PlayerUpgrade." Under 'Name', double-click "EnableAutoUpgrade." Under 'ValueData,' type 'no.' Go to "HKEY_LOCAL_MACHINE."

  e. click 'Edit', 'New' and 'key '. Type "WindowsMediaPlayer." Click on 'OK '. Select the new key, and then click on 'Edit', 'New' and 'DWORD value'. Type "DisableAutoUpdate" and press "enter." Select 'Edit' and then 'change '. Type '1' and click on 'OK '. Click on 'OK '. Click on "File" and "Exit" to close the registry editor.

  f. click "Start", "Control Panel" and "Security Center." Under ' Manage Security Settings for, "click on"Windows Firewall ". Click the 'Exceptions' scroll down until you see "Windows Media Player." Make sure that the box next to the entry is unchecked. Click on 'OK '.

  g. right click on the toolbar in Windows Media Player. Select 'File' and 'Work offline' to completely prevent Windows Media Player to access the Internet somehow. When you want to restore Internet access, right click on the toolbar, click on "File" and remove the check mark next to "Work offline."

  That should do it.

• When Adobe or Microsoft will provide a way to disable the debugger with integrated flash player

  I have a problem I've noticed a lot of people have that running windows 8, 8.1, and 10 with the embedded version of Flash Player (called Shockwave Flash lens on my system).  This has to do with the version of debugging that is automatically installed with windows 8.1.  There are many developers who love and use the debugger, but there are many of us, users who don't and we cause anxiety and frustration.  He is currently doesn't seem to be a way to disable the debugger which translates as us users to get windows with different error codes that indicates an error Script of action has occurred.  This happens quite often, and even if it can be closed by clicking the ignore, it is aggravating and frustrating to have this pop up window at all.  I'm not a developer and do not use the debugger and dislike not being able to disable this feature on my PC.  Microsoft or Adobe will fix this problem and propose a solution for us?

  Hi Bill,

  Please ttry the following:

  • Make a right click Start Menu button in the lower-left-> programs and features
  • Click View Installed Updates in the left upper corner of the window
  • Locate the debugger for Internet Explorer Flash Player for Windows 8.1 in the list
    
  • If she is there-> to highlight and click Uninstall
  • You will be asked to reboot, and Flash Player should be uninstalled once it is complete
  • After the reboot, launch IE and go to https://helpx.adobe.com/flash-player.html and click on the check now button
  • What version of Flash Player is installed?

  If he still has the 19.0.0.207 or "debugger for Internet Flash Player for Windows 8.1 did not appear in the 'View' list updates installed, please try to clear the browser cache (I don't think it's a matter of caching, but it's worth a try):

  • Right click the Start Menu button in the bottom left-> Control Panel
  • Select Internet Options
  • in the general tab, go to the browsing history section and click the delete... button
  • In the remove history window:
    • Uncheck the first item on the list "Web site data preserve Favorites" (having this check mark element isn't just erase).
    • Check the following "files temporary Internet and Web site files", "Cookies and Web site data.
    • Click the Remove button
  • After clearing the cache, go to https://helpx.adobe.com/flash-player.html and click the check now button.
  • What version of Flash Player is installed?

  Please post the results of these two.

  We have this scope within our contact at Microsoft.  I'll make the results for them.

  Thank you.

  --

  Maria

• Re: How to disable the BIOS on Satellite Pro A300 - 1 2 pass?

  I have a Toshiba Satellite Pro A300 - 1 2, some how the BIOS got locked and a startup password has been enabled, I tried to get in the BIOS to disable the startup password but without any job.

  What I need to send or take it back to Toshiba to take them off for me?

  Thank you for your time.

  If the BIOS password does not work for you, you need professional help. Contact the nearest Toshiba service and they can remove it for you.

• Disable the touchpad? Satellite 1000 Help!

  Hello

  I have a satellite 1000 and when typing I continues to catch the touchpad/mouse pad. How can I disable that I use a mouse usb anyway. Thank you very much
  GAV

  In my opinion, you can disable the touchpad in the Manager device or when you press Fn and F9!

  Good bye

  [Edited by: admin]

• Is it possible to disable the GPU dedicated Satellite L850

  Is it possible to disable the GPU dedicated on the L850.
  Through the BIOS or something else, so that the laptop works on the onboard graphics on the CPU.

  Thank you

  Hello

  What L850-xxx you exactly and what dedicated GPU support?

  Laptops that support technology Optimus (with nVidia GPU) could switch automatically between the GPU (Intel) internal and external nVidia GPU and it depends on the application running.

  In some cases, you might choose weather, that an application must use internal GPU Intel or NVidia GPU.
  Here's a great youtube video:
  http://www.YouTube.com/watch?v=Zh4HCadTY_A

• How to disable the boot on Satellite L305D-S5893 Toshiba start screen

  Is it possible to turn off or disable the startup splash screen? Not that I mind the Toshiba brand but the screen is simply ugly and I'm starting to find it boring.

  Current product: L305D-S5893

  Thanks in advance,

  Hello

  If the BIOS doesn't contain options to activate the plash screen Toshiba ON / OFF then it is not possible to disable the Toshiba start screen.

  I put t know what you mean by + screen is simply ugly + but my Toshiba home screen appears for a sec and its ok.
  It s definitely not boring

• How to disable the fan completely - Satellite A10

  Hello

  I have an old laptop Toshiba A10. I use it because of the noisy fan. I would like to completely disable the or the fans. That will allow me to use the laptop on the lower CPU clock speed. I know that the fans are important for the cooling of the processor and hard drive. However, I'm not looking for advice or recommendations on how to limit or reduce the fan noise. To be clear, I want to completely disable the fans regardless of the consequences it may have for the laptop or any of its elements. Is it possible somehow to turn off the fans without opening the laptop and physically remove the fans...?

  Best for all
  Lanson

  RedHawk's right. There is no way to turn it off completely. It can be risky for the hardware of the laptop.
  I have old Satellite 1900 and fan is also strong enough. What you can do is to change the method of cooling in the Toshiba power settings.

  Put it in silent mode. I hope this helps a little.

• No way to disable the touchpad on Satellite L450D - 11 X

  I had my laptop Satellite L450D - 11 X, pre-installed with Windows 7 64-bit, since November and that you come to learn about the function key to turn off the touchpad - a very desirable feature. Unfortunately, pressing the combination of keys Fn + F9 does not work. There is a question answered - now closed - in this forum that advises to restore the laptop to its original configuration to address this problem, which I guess means running a HARD drive recovery procedure and restore the application software - not a trivial task. I took a chance and downloaded and installed the driver for the TouchPad Synaptics Windows 7 x 64. He has a facility to disable the touchpad in the mouse properties window, that works.

  I became aware of the ability to disable the touchpad keys during the installation of new Acer laptop from a friend, who has a button next to the touchpad to market. Come the day where all laptop has such a change a lot of laptop users will be happy, judging by the number of people, I fell on the web looking for a way to disable the touchpad keys, especially when entering.

  I would prefer if the L450D key combination worked, however. Does anyone know how to do this without a HARD drive recovery? Some of my other function keys are also "broken." Not vital, but I don't hate things that don't work as specified.

  What you need to do is to reinstall the package of added value. You can find it on the download page of Toshiba. This package contains several tools and one of them is utility (command buttons FN) flash cards. Remove VAP preinstalled system, restart your computer and install the latest version of the Toshiba support page.

  To say, this little button is also available on some models of Toshiba. If I remember well, it must be available on A500 and U500. Maybe also on some other new models of laptops.