4.3.6 7.0.1 downgrade firmware for a PS6010

Similar Questions

• Can I downgrade firmware AirPort Express to 7.6.4 to 7.6.1?

  I have an AirPort Express 802.11n, 2nd generation, with the firmware 7.6.4. I was unable to get a Chromecast to connect to him - there seems to be a known problem with the connection to any firmware version 7.6.1. With the help of the utility AirPort 6.3.6 if I option click on the version of the firmware for the router and get the choice of the downgrading of firmware 7.6.3 but nothing earlier. The 'other' option one opens 'my documents' dialog, but if there is a version of previous firmware stored somewhere on my Mac, I don't know where to find. Grateful for any help.

  If you have purchased the Express with 7.6.4 firmware can not be downgraded. Downgrades Apple blocked... and 7.6.3 is poor so stick to what you have.

  I think that problems with Chromecast on 7.6.3 and 7.6.4 are more to do with an extreme as the express... However if she refuses to work... Be smart...

  Apple created their network for apple devices... so use your Apple TV not a chromecast.

  OR

  Buy a cheap as wireless router of the low-end N TP-Link Wireless (or other Chinese brand) chips... Connect all wireless router is the main router of the network and use as WAP for the Chromecast... you'll have a lot less questions to stick to Non-Apple wireless equipment when you use streamers not apple.

• USB-TC01 gives error-201165 "firmware for this device is too recent.

  Not sure where else to this post, but the USB-TC01 DAQmx uses, so maybe someone recognizes this.

  I plug it to the USB port and it lists very well.  It runs the application very well canned.

  But when I try to take data under DAQmx 9.1.5 I get this curious message, as well as boards "Downgrade of firmware for this device" I don't want to do that.

  EDIT: I see that the firmware of the device is 1.1.0f 1

  The specifications of the USB-TC01 don't say what version of DAQmx is necessary, although 9.1.1 supports the device.

  I tried on XP and Win7 with the same result.

  TIA

  Ed K

  I guess that "ancient" is relative.  Budget and LV9 story of me and I have to stay on the DAQmx version.  But NEITHER finally took me in his Web and it's time for an upgrade.  A trial version of new LV and 9.9 DAQmx solved, of course.  I just wish that error message had been less weird.  At least, it is here for someone else could find an answer, no matter how obvious.

• LaserJet 4250 jetdirect j7949e: firmware for jetdirect j7949e

  Hello

  I tried to update the firmware of the integrated (on my laserjet 4250) jetdirect j7949e, but the version displayed by the built-in webserver (V.33.28.FF) is higher than the latest version offered by hp (V.33.21) - see [1] [2]

  -How is that possible?

  -should I downgrade to the "official"?

  Thank you

  Republic of Korea

  [1] http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpj07429#N102F8

  [2] ftp://ftp.hp.com/pub/networking/software/jetdirect/firmware/

  You should generally only firmware jetdirect integrated by updating the firmware of the printer, since it comes as a set.

  I'll try to remember one of the 4250 printerss to work tomorrow because I have the latest firmware for the printer installed.

• Once you install a new printer firmware for your printer, is it possible to return to the earlier version of the firmware of the printer in case an error occurs?

  Once you install a new printer firmware for your printer, is it possible to return to the earlier version of the firmware of the printer in case an error occurs?

  It may be an option, as long as the error prevents you to connect to the machine. Even so, some firmware update software will not allow a downgrade. This is something that you should go to the manufacturer of the printer for more information.

• Error message on the download of update of firmware for airport

  Get an error message when you try to download the update of firmware for the airport. Have disabled the Wi - Fi for all devices; powering down of the airport; MacBook connected to the router via a cable; access to Internet but the download update still gives an error. Any ideas on haw to get the update, or what is the problem? Thank you.

  The error message say, exactly? What version of Mac OS X you are running on this machine?

  For updates of the firmware to work, you must be connected to your device from the airport and connected to the Internet at the same time. If you have a situation where you have to disconnect from the Internet to connect to your airport device, it does not work, at least not for the first time, you have to download a firmware version for the same model of AirPort base station.

• restore the firmware for macbook pro 13 mid 2009

  Hi all! This is my first time using the support community so forgive me for any rudeness and English summary.

  I recently bought a used mid 2009 macbook pro 13 "with no disc on this subject, I installed a new empty 120 GB ssd drive.

  I asked a friend and he has downloaded and made me a usb bootable with osx on it (lion). I instaled the osx and got the macbook running successfully and it was perfect.

  I decide to update and went up el capitan wich sucessfully installed. After the update I tried it out, web navigation simple, when suddenly, out of nowhere the mac stop (much battery left and the led indicator to confirm) and has not started since... when I turn it on the led light flashes and it gives the s.o.s. beep (3 short beeps followed by 3 long beeps and then 3 short beeps) the optical drive made his usual looking noises of boot and the fan continues to spinning, I tried to remove the battery 10 minutes several times and nothing... I read a lot about the problems of ram tested with one stick at a time in the two slots and no improvement... bought a new pair of hynix 2 gb 1066 mhz pc3-8500 ddr3 sticks as recommended for this model and replaced the "old"... did nothing.

  I have no original discs just the macbook itself and the charger. Also tried to boot from the usb drive... not good... tried to start mode revovery... nothing that the black screen and a beep sounds.

  I did some research and read a looooot online and in discussions such as this apple and found it to be the sound warning for bad/corrupted efi rom (as opposed to the majority of people declaring it to be a ram issue) which needs to be restored or flashed... However, apple does not provide or at least I can't find a picture of recovery for my model cd special I know it's the macbook 5.1 (a1278 / emc2254). Is there any solution for this? Please help in some way that you can welcome suggestions!

  Thank you

  Then, you say at the end of your post, you say that it is a MacBook, but it is a MacBook Pro. Check which model you have.

  On the updates of the EFI and SMC firmware for Mac computers with Intel processor - https://support.apple.com/HT201518

  What to do with all these "beeps mean at the start? - http://forum.insanelymac.com/lofiversion/index.php/t62919.html

  Power on self-test beep definition - part 2 - http://support.apple.com/kb/HT1547 - old Macs

  Mac Power on Self Test RAM Intel processor error codes - http://support.apple.com/kb/HT2341

  iMac (mid 2007) and later models: on startup tones - http://support.apple.com/kb/HT2538

• I need the firmware for the Toshiba excited AT7 B618

  Hello

  The Tablet keeps showing a message

  Unfortunately, it stopped secret lock

  Ok

  When I press OK it comes again.

  I fact (power + key) factory reset, but it does not solve the problem.

  I installed antivirus it found 7 threats, but he did not remove it because it becomes the vendor applications. Viruses that are present in the backup.

  I need the firmware image to excite at7 - B? Please reply with the download link.
  
  Device name: AT7-B618
  Unit number: PDA0HV-002004AR
  Product group: TOSHIBA

  Best regards
  Department of health Shair
  
  Thank you
  

  I have the same problem, why not support a large company like toshiba product, why I can not download a firmware for AT7-B618?

  Please I need this firmware
  Best regards

• Firmware for the SSD THNSNJ128G8NU

  Hello

  I can't download the firmware for my SDS: THNSNJ128G8NU
  My laptop is a msi Ge72.
  Can you help me.

  Thank you

  I think that this firmware update is not yet available...
  Where new firmware is available, you should find it on this page:
  http://Toshiba.SEMICON-storage.com/e...t-SSD/Hg6.html

• Need firmware for Toshiba 40TL968 services

  Hi guys,.

  any chance someone could help me to provide the service (bin, mfc, mboot file) firmware for 40tl968?

  Im a little apart, and there is no repair of Toshiba close store.

  Thank you!

  What is the problem with your TV?

• New firmware for Toshiba 39L4333DG

  Hello

  I'm new here. Could you tell me please when I can exepect new firmware on th TV?
  It's almost a year since the last update at the same time all of my local vod applications stopped work correctlly.
  A vod owner told me that you do not support DRM features that cause the app does not work properly
  (local names of applications are ELPI, player, vod onet)
  Rafal

  Hello

  I had a question for one of Toshiba TV games firmware, you'll make new firmware for either of the sets of TV from Toshiba?
  Or you just stoped doing this.

• Where can I find Firmware for my Toshiba 40TL938G?

  Hello
  where can I find a new firmware for the Toshiba 40TL938G? I can only find on the new site software updated firmware for the 40TL933G and the 40TL936G. The 933G software is compatible with the 938G?
  The function of automatic update does not work with my TV.

  Thank you

  Dennis

  Hello

  Have a look here:
  http://www.Toshiba-OM.NET/firmware.php

  If your TV isn't listed, it means that this firmware is not yet available!

• Where to download the firmware for Toshiba 19BL502B TV

  Hello

  Is there a place where I can download the firmware for my Toshiba 19BL502B TV, so that I can install on a USB key and update?

  I've already asked about the firmware that supports Xvid in the forum "New TV model Discussion", but had no luck. As I said in my previous post, the online manual for the machine indicates she has support Xvid, while my paper manual is that the part removed.

  My previous post was:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=134

  And here you see a photo with a comparison of the two manuals.
  I seek to change the firmware of the TV so that it supports Xvid, whether a new firware update or an older one.

  Thank you

  Frank.

  Hello

  Have a look here:
  http://www.DL.Toshiba.com/dly/index.jsp?region=GB&lang=en

  This is the place where you can download the firmware for Toshiba TVs

• New Firmware for the 32TL933 3D LED

  I found at this address 'http://www.dl.toshiba.com/DLY/index.jsp?region=GB&lang=FR', a new firmware for
  32TL933G (G for the other Europe).

  is it compatible with my 32TL933F (F for France)?

  Thank you

  Good question.
  If nobody here can offer you the right answer, I recommend you contact the France Toshiba service provider and ask them. They have direct contact with Toshiba France and can verify this information or perhaps send you a most recent and the most recent update for your Toshiba TV.

  By the way: you have problems with your TV?

• New firmware for the required SSD THNSNC256GBSJ

  Can I get a new firmware for my model THNSNC256GBSJ s/n 51GB50HNK6LK SSD
  8.1 x 64 installed on my Windows System.

  To my knowledge, an update of firmware for THNSNC256GBSJ isn't available.
  But why are you talking about firmware update?

  SSD drive is recognized in the BIOS?
  If so, you don't need any SSD firmware updates to install Win'a 8.1