4 k Yellow screen

I recently bought an iMac 21.4 "with drive merger and was dismayed to see a light yellowing to the lower third of the screen. The top of the screen is bright white. I got if for a refund and before that I have to order another that I wonder if the same thing is likely to happen again, or if I got a lemon.

Any comments?

The screen should have a continuous brightness - but some users notice small variations in color and tolerance of the user may vary a little.

Instead of reorganization, stop at your Apple Store and check out their floor models.

Tags: Mac

Similar Questions

  • Yellow screen before the splash screen

    Hello

    I use a g6-1004tx model.

    This problem is persistent for some time now.

    After that I start my laptop, there is a yellow solid screen that appears before the page main starup

    lights.

    I've updated all the drivers, but the yellow screen still appears.

    Kindly look on this.

    Kind regards

    Aditya

    Hello @AdityaKumar ,

    Welcome to the HP Forums!

    I understand that your portable flashes briefly before putting a yellow screen.

    I've seen similar problems before. I'm safely assuming that the laptop works fine otherwise?

    To help you, I need to know which operating system you are using. What version of Windows you are using, click here: Windows operating system am I running?

    It sounds to me like the question is the result of graphics drivers map loading slowly or error when loading in a way. Please try to start in safe mode and tell me if you encounter the same problem. You can see how to start in SafeMode here: start your computer in SafeMode (Windows 7) or start your computer in SafeMode (Windows 8).

    If the problem did not occur in safe mode, reinstall the drivers for your graphics card. You can find them here: drivers PC laptop HP Pavilion g6-1004tx.

    If the problem persists in safe mode, it is most likely hardware related. Take a look at this guide to test hardware failures: hardware failures (Windows 7) test or test of hardware failures (Windows 8). You want to run the test system and test the video.

    I would like to know if any of this helps.

  • up the yellow screen in vista after startup

    I write in the name of the customer:

    "no message error but when I turn on the computer it starts normally, but when the screen turns yellow.

    Hello Agent CU V-13elka,.

    Your computer boots into Windows, before seeing a yellow screen?  You see the information from manufacturers on how to start?  I suggest all like Chloe and try to start safe mode.  I have included a link below on how to run last known good configuration with Vista.  Please let us know status.

    Last known good configuration:

    http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  • Computer laptop yellow screen on startup

    I'm fixing my girlfriend's laptop. ; It's an HP dv6-3122us. I cleaned a bunch of junk she had there, but I can't seem to understand what causes the yellow screen. He appears at startup, once completed the Microsoft Windows loading through, but until the desktop comes up. It's just a yellow screen Uni with a pointer to the mouse over it (which can be moved). It remains like this for about a minute before the screen changes in the normal office environment. I ran Kaspersky, Avast and Malwarebytes to get rid of any virus/trojans/etc that are on it. I also manually uninstalled unwanted programs and used CCleaner to clean the computer and repair the registry. In addition, I updated the graphics driver, windows is up to date, and I tried to perform a clean boot. None of this seems to fix anything. However, when I start the computer in safe mode, the yellow screen does not come upward. Any ideas on that?

    Thank you

    Hello

    Thank you for your valuable response.

    When you uninstall the driver and restart the computer, Windows installs automatically the generic drivers for answering your question driver have no problem. So based on the result I can explain it could be issue with the graphics card itself, I suggest you contact HP to check and change the graphics card.

    HP contact number

    http://support.HP.com/us-en/contact-HP

    I hope this helps. Write to us for assistance.

  • Yellow screen whose picture would be at the opening of raw images

    After you open a raw image in change, a yellow screen where the image should be on cloud creative/CS6 how if I open the image in photoshop elements it appears as it should. I open the image to a file in Format all. How can I get the image to appear in creative cloud?

    Hi andrewd,.

    Go into Photoshop preferences in Photoshop CC > file handling > Camera Raw Preferences > uncheck "use graphics processor" down > restart Photoshop and then check out.»»

    Concerning

    Claes

  • When I type the R command to open ACR I get a yellow screen United

    I use a new XPX15 from Dell and it seems that there is a problem after another. I had used the bridge and had no problems before. Today I went to open an image in ACR to make a few changes and I just got a yellow screen Uni. Earlier in the day, I got a message saying my necessary GetForce updated and I did the update, it's the only thing I changed. In fact I have also updated Photoshop CC as well. Now when I open in photoshop without problems.

    Hi gstepic,

    Please turn off the graphics processor of the ACR preferences and then try via the bridge.

    Steps to follow:

    Open Photoshop

    Go to the Edit menu< preferences="">< camera="" raw="">

    Clear the settings of the graphics processor.

    Kind regards

    ~ Mohit

  • camera raw showed a yellow screen

    Just paid for my first month of LR and Psalm when I go to camera raw to edit, all I get is a blue and yellow screen.  No idea why?

    Hi Julie,

    Go to the Photoshop preferences > file handling > Camera Raw preferences > uncheck 'use the graphics processor' > restart Photoshop and check

  • Split screen in two and purple lines with yellow screen?

    So, I was watching a YouTube video and my screen started flashing all crazy. So I turned it and turn it back on and now my screen is yellow with purple lines and there are like two screens because it is split in the Middle goes horizontal. Sometimes I turn it on and it works very well for about 5 minutes then it starts flashing and goes back to all these things. I would like to safe mode, but I do not see Scripture because that its all messed up. I also try changing the screen resolution setting, but it won't let me for some reason any. Here's what my screen looks like http://s1353.beta.photobucket.com/user/zachman12356/media/untitled.png.html?sort=3&o=0

    On Sunday, November 4, 2012 18:07:12 + 0000, ZachMan101 wrote:

    So, I was watching a YouTube video and my screen started flashing all crazy. So I turned it and turn it back on and now my screen is yellow with purple lines and there are like two screens because it is split in the Middle goes horizontal. Sometimes I turn it on and it works very well for about 5 minutes then it starts flashing and goes back to all these things. I would like to safe mode, but I do not see Scripture because that its all messed up. I also try changing the screen resolution setting, but it won't let me for some reason any.

    It is certainly not a question of Windows. You have probably one
    problem with one of these three things:

    1. the monitor

    2. the video card

    3. the cable connecting the monitor and video card.

    First try the cable and make sure that it is closely related to the time
    ends.

    If this is not it, see if you can borrow a monitor from a friend and try
    instead of yours. If this solves the problem, you need a new
    monitor.
    If this solves the problem, it is probably the video card. But
    before you replace the video card, open the case and make sure that it is
    sitting in his niche.

    Ken Blake, Microsoft MVP

  • camera 9.4 show yellow screen instead of the photo

    Hi all

    I have problems. My 550 d Canon CR2 files.

    Today, I just installDigital.Anarchy.backdrop.Designer.v1.1.for.adobe.p 2015 cc and when I open p. CR2 closed 9.4 it shows yellow on the screen instead of the photo.

    How can I solve this problem?

    12790154_1246897435338565_450361517_o.jpg

    Any help appreciated

    In Photoshop, click on Photoshop (Mac) or edit (Windows) > Preferences > Camera Raw.

    Uncheck the box use Graphics Processor.

  • Yellow screen in raw

    I can't open my photo in camera raw. It opens to the top of the screen, but all or any picture comes out like a yellow white screen. It's not a dyed yellow, there is no photo is completely full screen yellow. Help, please. Thank you

    Hello

    If your using one of the versions of photoshop Photoshop cc go Photoshop (Edit) > Preferences > Camera Raw, uncheck processor use chart ongoing execution and then restart photoshop and see if that makes a difference.

  • PowerBook G3 Pismo yellow screen

    Hi, my PowerBook G3 Pismo has a slight yellow tint on the display. Can someone tell me what part I would need to correct this or is a whole new LCD necessary? Thank you.

    Already consider a new computer? You should check places like eBay, iFixIt or search via Google for parts. Now, they should be pretty rare and expensive. This PB is now 19 years old. It's a great machine (I got one once), but it's time for a new, I think.

  • Yellow screen with a blue background in Camera Raw

    Wird Beim Öffnen eines RAW in Camera RAW nur ein gelbe Bild mit blauem background displaying. Was kann ich tun?

    Hi arie,.

    This seems to be a problem because of the graphics processor.

    Go to Camera Raw preferences > uncheck 'use the graphics processor' > restart Photoshop and then check out.

    Kind regards

    Claes

  • iPhone 7 - dyed yellow, it will disappear?

    My iPhone 7 on just below, has a yellow tint.  I'd come back or it will go away and be as brilliant as the iPhone 6 s.

    Go in settings / display and brightness. Check the setting of the night shift (feel it) and check to see if program is running. Check it then of: and to: times. Night shift will tint yellow screen if the time of day has been in the interval of time specified when you took your screenshot. If you are not within the expected time, check your setting manually activate until tomorrow and make sure it is OFF.

    You can turn off scheduled and manually activate until tomorrow to return the screen to the glossy appearance.

  • iPhone 5 s random blue screen

    I had problem with restarting and blue yellow screen. I have reset with factory reset. It was OK for awhile, but when I used internet and podcast I had the problem but this time juicerandom blue screen t it fixed with a hard reboot with the House and the other keys, but sometimes not I should wait and and closed his iphone for a few hours will be this help. I am confused as what to do I need the podcast radio and itunes ibooks download and cannot use it scared that something will happen. Waiting for your help

    It is likely that your phone has an intermittent problem with the hardware. Back UP and then restore iOS through iTunes. If that not the fixed not to take to an Apple store for diagnosis.

  • White screen Windows Update in Windows Vista Business

    Dear Sir/Madam,
     
    I am writing to you on the white screen of Windows Update in Windows Vista professional.
     
    Description of the problem: our company PC using Windows Vista Business Service Pack 2. Some computers may not be updated. When I check the update of Windows on the PC, it shows the white yellow screen and there is a text: #elementModuleHeaderText #.
     
    On nearly 40 PCs have this problem. Here I show an example of a PC.
     
    OS: Windows Vista Business - Service Pack 2
    Product ID: 89576-355-6928971-71708
     
    The suggestions that I made:
    1. use the auditor of file system (CFS) to scan system files
    Please help me solve this problem.
    Looking forward to your support
     
    Thanks & best regards,
    At sang Phan Van / MR.
    COMPUTER service
    USOL'YE VIETNAM Co., Ltd.
    Address: 20th floor, Tower of Hoa Binh, 106 Hoang Quoc Viet Str, Cau Giay Dist., Ha noi, Viet Nam
    Phone: 84-906-665-115
    Office phone: 84-43-755-6500-Ext: 247
    Office Fax: 84-43-755-6501
    E-mail: * e-mail address is removed from the privacy *.

    Hi Mr sang,

    Systems on your network are joined to a domain?
    If so, they use Windows Server Update Services (WSUS) to get their updates?

    If you use WSUS, you should post your question in the forums found here WSUS:
    http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

    If you do not use WSUS, but your systems are on a domain, you should post your question in the forums Vista IT found here:
    http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

    If the above do not apply, you find the same update white screen when you run updates under a new profile?
    Also, if you connect to a user in safe mode account, you get the same results?

    Cody C
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for