4090xcdt OS Win 98 Update--> Win 2000

Similar Questions

• 4030CDS WIN 2000 pro problem

  Hello
  I try to install win 2000 pro on the laptop next - Satellite 4030 - I insert the CD and press and hold the 'C' key to boot from the Windows CD 2000 Setup screen appears and begins to install the drivers. The installer gets so far then the following message appears on the screen:
  STOP: 0X000000A5, 0X814884DC, 0X00000000, 0X00000000)
  The ACPI BIOS in this system is not fully complient with the ACPI specification. Please read me text for possible workaround solutions. You can also contact your manufacturer for an updated BIOS.

  So, what do I have to Flash the BIOS with the latest version, or is it possible that I can work around that? I've done a few things with PC (built some etc etc) BUT I have never tried flashing the BIOS before and I heard that it can go very wrong! Any suggestion would be appreciated!

  Thank you

  Hi Marc,

  If you update BIOS there are always good. The last, you can find on http://eu.computers.toshiba-europe.com under Support & Downloads Download BIOS.

  This is the zip file, and there is also a text document that contains the BIOS update procedure. Follow this description, and you can do it with success.

• Satellite Pro 6000 lost DVD/CD Rom drive after upgrade to win 2000 sp4

  Help, please! I have a laptop Toshiba SP 6000 and after download win 2000 sp4 on the internet have completely lost my CD-ROM/DVD-Rom drive. When I go to my computer and Device Manager it has a yellow I and following the warning "windows cannot load the driver that windows is unable to locate relevant data' and it has error code 31? I've been on the Toshiba site but don't know which update to take! I really need help.

  Hello

  Well, it the very strange question s. normally after the installation of the new operating system must be recognized the CD/DVD driver.
  I have studied in the web and find nice websites that describes this problem.
  Check this site:
  http://TechRepublic.com.com/5208-11183-0.html?forumid=89&ThreadId=181561&start=0
  http://support.Microsoft.com/kb/q270008/
  http://support.Microsoft.com/default.aspx?scid=KB;%5BLN%5d; Q314060

  Good luck

  Good bye

• Using Win 2000 Prof Installed Firefox 9.01 without permission how to go back

  Mozilla installed Firefox 9.01 without permission and is not compatible win 2000. How to uninstall and go back to 6.0 or 8.0?

  Firefox 9.0.1 is compatible with Windows 2000 SP4.
  
  http://www.Mozilla.org/en-us/Firefox/9.0/system-requirements/

  What specific problems with version 9.0.1 meet you?

• Portege 3490 - need Win 2000 display driver

  I installed win 2000. my screen will not work above 800 x 600 pixels and so her only fills the screen. I downloaded the driver display toshiba win 2000, but unlike other drivers, there seems to be no implementation of the exec file to install it.

  Please would someone addvise me what to do next

  See you soon
  Paul

  Hello

  As much as I know this device was delivered with S3 Savage/IX 8 MB graphics card.
  I found two display drivers for this device. The latest version is 05.12.01.7048 02/13/03.
  Well, I put t figure out why you are not able to install, but you should check this recommended driver.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Good bye

• Satellite 1730: I'm looking for driver for Win 2000

  Hi, people.

  Someone had expirience with Win 2000 and Toshiba S series 1730. I can't find a driver. Help me, please.

  Hello

  Only drivers for Windows ME OS page the European driver of Toshiba.

  But I also searched the site of Toshiba Canada compatible drivers of W2k and found some compatible drivers:

  Please take a look here;
  http://209.167.114.38/support/download/ln_byModel.asp#

  In addition you could install a diagnostic equipment such as Everest home edition application and could install the necessary drivers from chip manufacturing sites

  Good luck

• Is an upgrade to Win98 or Win 2000 on Satellite 315 possible?

  My 315 satellite was delivered with Win 95. I would like to Win 98 or even Win 2000. Will they, they run on 315? If Yes, where can I get drivers for 315? They seem not to be available in the archive of the Toshiba driver. G.R. [email protected]

  Hello

  I checked the European pilot site and since the Satellite 315 is probably identical to the satellite 310 series, you should be able to install win98/2000.

  There are drivers for Win95/98/NT (Windows 2000 architecture is like NT drivers * should * work, but without guarantee!).

  The other thing is: you have to keep in mind that performance under Win2K wouldn be very good, so it would be better to throw Win98 on the machine.

  See you soon

• Get the Windows on Win 2000 folder paths

  I downloaded the windows_folder_path.vi of the site OR, where I see that 'this VI is supported on Windows 2000, XP and Vista.»

  If I use it in an executable file that search for the Application Data folder, it works under XP, but is not under a new install of Win 2000 SP4.

  A popup with the message:

  Entry point not found

  The procedure entry point SaferGetPolicyInformation could not be found in the dynamic library ADVAPI32.dll

  is shown.

  When I press the button OK, another pop-up window

  LabVIEW: Resource not found.

  Error loading VI 'windows_folder_path.vi '.

  LabVIEW support 3 error code: could not load façade.

  I'm confused because here (MSDN, the Microsoft Developer Network) I see that the SaferGetPolicyInformationfunction requires Windows XP or Vista

  -This not vi should work properly under Win 2000?

  In the next few days I'm going to do the same test on a Vista machine, and I hope...

  How can I get the path of data Application on Windows XP, 2000 and Vista? With different OS languages this folder has a different name (data application, Dati applications,...) so I can't build the path for myself.

  I don't know if this helps, but I develop with LabVIEW 8.2.1and WinXP Pro

  Use the LV registry functions for direct access.

  The records for the current of the connected user is under:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders, the value is AppData

  The directories for all users is under:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders, the value is Common AppData

• MMC win 2000 error disc is full___

  by clicking on manage in win 2000 Server, error I m getting is mmc disk is full

  http://TechNet.Microsoft.com/en-us/WindowsServer/2000/default.aspx

  Above is the link for Windows Server 2000 communities.

  They will help.

  See you soon. Mick Murphy - Microsoft partner

• Win 2000 photosmart 5520

  CD does not appear to be a driver etc. to set-up my new e-5520 HP all-in-one on win 2000 Office. How when the cd will not and that the normal windows search method find nothing either. Is there a download that works, a jet pilot Office perhaps, which I find and is available

  Sorry, after more research, you will need to upgrade your OPERATING SYSTEM to Windows XP, 7 or 8 (prefer Windows 7).

  There is no driver that will support Windows 2000.

• Problems of connection attempts WIN 2000 machine to the net via wireless network

  Sorry, I know this is an XP forum, it is a question of WIN2000 - I hope someone can help.

  I have a wireless network using WEP - try to connect to laptop WIN2000: router wireless card the two NETGEAR.

  I have configured the sw of the laptop wireless networking and now get indication * that I'm connected to the network *.

  However - to try opening a browser, the indication is that there is no internet connection available. (Side: if I run an ethernet cable into the port on this machine, I can connect.)

  Got a limited assistance of internet service provider - ran ipconfig / all.  One thing that seems to stand out is the line "' active... IP routing: No."-I'm over my head at this point, but that seems important to me. " Next line is "WINS Proxy enabled: No.»

  Can someone help me out here? The information I have provided is important? (I can provide more information to ipconfig) All I can configure here (? activate IP routing?) Other (s) diagnosis I can do?

  Any help would be most welcome!

  Kind regards

  Bob T

  Hello

  Win 2000 has no internal support for the wireless.

  In order to launch the wireless, you must use a wireless card that provides you with Wireless Manager and drivers for the card on Win 2000.

  Once you have installed the drivers and the utility is launched, you should power set up the connection to the router wireless.

  Start first with the security of the router, enable WEP, once you know that you can log in and access the Internet.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Uninstall win 2000. I have now usexp on dualboot

  original system win 2000, I partition the hard drive, then installing Xp, I want to delete 2000, I n

  Hi charliep78,

  Step 1: If you intend to remove Windows 2000 boot sequence entry, try the following steps:
  a. start your computer and start Windows XP.
  (b) see How to remove a second installation of an operating system of Windows on a partition
  c. remove the entry referring to the edition of Windows 2000.
  d. restart the computer and check the result.

  Step 2: To remove Windows 2000 edition permanently. You need to format the drive/partition where Windows 2000 edition is installed. To do this, try the following steps:
  a. start your computer and start Windows XP.
  b. Click Start, click my computer.
  c. right click on the partition where Windows 2000 edition is installed, click Format, click on full and then click Start.
  d. when the formatting process is complete, click OK to close the dialog box.
  e. restart the computer.

  Important: Formatting the drive will permanently delete the data on the disc. We recommend that you back up the data before formatting the disk/partition.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect new pc W7 for win 2000 Server domain

  Having problems connecting to a new PC W7 on Win 2000 server with domain name.  No errors 'no mapping between name and security ID account' and "existing computer name was created using another set of credentials". Can't find any help on these topics in the forum of W7.

  Hello Eprman1,

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows 2000 and would be better suited to the Discussion of Windows 2000 groups. Please visit the link below to find a community that will support what ask you:

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.win2000.General

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Update from 4.1.3/Win 2000?

  I have an old (real old) application that runs under Windows 2000. I had been functioning satisfactorily under Fusion 4.1.3 he didn't need, and now I need yet :-(

  I understand that Fusion 7 is an upgrade too far and I have to do a fresh install. My question is: the files that have been stored on the virtual machine will automatically or is there something special, I have to do to import them? Are there other issues should I be aware of?

  Hello

  Welcome to the VMware communities forum.

  Basically he has to "just come."

  However good practices is to have your VM stops before running the upgrade.

  It is also a good idea to make a good copy of your virtual machine before you experiment with it.

  Oh... and use Fusion 7.1.1 and not merger 7.1.2 because there a problem with the OS vmware tools as soon as Windows XP SP3 (which I hope it will be fixed again in Fusion 7.1.3)

  --

  Wil

• Laptop has locked up on me win 2000 Xperia can help u that I'm on my ipad 3 trying to unlock my N130 10 "laptop

  Can I unlock my win xp laptop 2000 from my ipad I need some how to change the password that I can't remember.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are not able to connect to the computer, because you have forgotten the password.

  You can follow this link and check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  
  Note: refer to this article which describes the missing Microsoft strategy, lost, forgotten, or incorrect password.

  Microsoft's strategy concerning lost or forgotten passwords

  Hope the helps of information.