40TL838 (French model) firmware update

Similar Questions

• Seagate Hard Drive Firmware Update for the drive model: ST1000LM024

  I have (HP Pavilion dv6-7180se Entertainment Notebook PC). All the drivers for this model installed correctly except the drivers Frimware (Seagate hard drive Firmware Update) and (PLDS Optical Drive Firmware Update). the first one says "this hard drive model is not supported. Model = ST1000LM024"but my hard drive came from the factory, so what is the practice solution to install this driver? images .view of problems:

  This is to seagate:

  and for PLDS:

  Need help. Thank you.

  What mean of these messages, is that these "Firmware updates" do not apply to material in your specific computer. The two "Seagate Firmware Updates" are respectively for the hard drives of 250 GB / 320 GB and 500/750 GB hard drives. Your computer comes with a 1 TB hard drive, which is not subject to updates of the firmware. The "PLDS Optical Drive Update" is for another drive to CD/DVD only installed in your computer and also does not apply. There is no further action to take... Do not attempt to install these updates of firmware, because they do not apply to the hardware in your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Airport Extreme Base Station model bricks A1408 after failed firmware update

  Shown on Macbook Pro iOS X 10.10.5 airPort utility update the firmware available for both devices on my network 3 June 2016
  1 Airport Express 7.6.7

  2 version of Extreme Base Station Airport unknown as not reported as I expected not die

  After the update successful of the AirPort Express, the update cannot be installed on the Base Station firmware.

  After waiting a while, I tried the update again which also failed to install.

  Current symptoms:

  a. the Base Station is hot indicating energy consumption

  b. No. LED light is during the power on self test or during the race

  c. not discover measure on the WIFI network

  d. is not identified on Ethernet connection without light next to the Ethernet port

  e. DC output is 12V on the connection of the power supply works as expected

  f. cannot perform factory reset using the reset button on the back of the Base Station

  Where other devices working on the same power supply as the Base Station that very sensitive to power outages - these remain functional during the attack of upgrading me to think that he has not lost power while firmware update took place.

  My home network is made entirely of Apple devices - should I worry on the application of the firmware updates in the future.

  It's embarrassing and I now Cat5 running through my house just to maintain services.

  I can't confirm the date of purchase, so I don't know if it is covered by the warranty, however, I'd like to think Apple would cover this.

  What I am doing wrong and y at - it a way to recover the device.

  Help

  We have seen a few posts of users who have had the same problem.

  Unfortunately, not a really nothing you can other your advocate Support of Apple.

  Good luck and hope that you will have this resolved quickly.

• Airport Express firmware update

  I had a Firmware Update for my Airport Express.

  How can I update? I can only choose ignore, do not to update. In other words, what I did now.

  Zu-updates information to update Firmware as airport-Basisstationen - Apple Support

  It's funny. I think it's a bug.

  Airport-Dienstprogramm 6.3.6 on El Capitan

  "You are not allowed to create or update this content" - funny too.

  This firmware it works now?

  What model is the Express?

  You can do it manually even if it is a bit complicated.

  Re: proxy server annoy 7.6.7 update?

• New Firmware Update - where is the change log?

  I see that a firmware update was sent to my phone. However I can't find a change log. Where is it?

  Hello!

  HP and Microsoft has released an update (online) of the OTA for the X 3 elite on October 25, 2016. The update installs Windows Mobile 10 for the following versions:

  Firmware revision: 0002.0000.0014.0100

  Build of the OS: 10.0.14393.321

  Bootloader Version: 520101

  New features:

  Area	Description
  Display	High brightness Mode is activated when the brightness adjustment is suggested by default.
  Security	Reset functionality is enabled. However, the existing user must reflash phone with this software with Windows Device Recovery Tool (WDRT).

  The issues addressed (Items with * are fixed by OS updates):

  Area	Description
  Apps	App Instagram, have green lines during use is fixed.
  	Launch of view inconsistent HP on docking tools is fixed.
  Audio	Detection of the helmet is not reliable is fixed.
  Camera	Auto focus performance and stability in low light conditions are improved.
  	Model tapes preview screen is fixed.
  	Video recording after that tap put in pause/resume many times received message 'something went wrong' is fixed.
  Security	Blue BitLocker Recovery screen on reboot with active device encryption is fixed.
  User interface	Tap to wake up the wrong feature turn off screen is fixed.
  Hello Windows	IRIS is unblock, followed by sweeping to unlock quickly led to the prompt error is fixed.
  	Fingerprints and Iris being setup one after the other, one of them will not functional, is fixed. **

  Known issues:

  Area	Description
  Apps	Skype for business app can be run from external display of Continuum.
  Connectivity	Dock desktop LAN port of HP has no configuration of the user interface.
  User interface	Missing tiles with update settings. The user can go to the list of applications, press the settings icon and select PIN to start restoring the tile.
  	Tile 2 Messaging becomes white with update. Touch on the tile once it restores.
  Security	Too many failed unlock attempts, the device will be blocked for security reasons. User can unlock the unit to https://account.microsoft.com/devices.

  Thank you

• Airport Extreme is flashing yellow. Utility shows "Firmware Update" but no button to do so.

  Hello

  my Airport Extreme will blink yellow. Airport utility shows a red circle with a white "1" and "Fimware" available update.

  But there is no button to update. I can choose 'Ignore' only.

  AirPort Extreme 802.11n (2. Generation)

  The Firmware is 7.5.2. The current version for my model is 7.6.4.

  Airport utility is v6.3.5.

  The airport works well so far. So, I need this Firmware update?

  Thanks for your suggestions.

  Open AirPort Utility

  Click on the image of the AirPort Extreme

  

  I don't think that you really need to update unless there is a feature... as the extension of the network of comments... you need.

  If there is no update button in the window that appears, we still have another "bug" to the report

• Toshiba 40L7335D - various issues after firmware update

  Hi all,

  I bought a Toshiba 40L7335D, serial number 70T04380.Tv was working perfect until the last firmware update. No, I have problem.
  When I reproduce any movie in 3d or 3d demo, I have bad reproduction. Picture is blurry and a bit blurry. It was a perfect image before update. And I have this problem only when I reproduce 3d movies/demo, I don't have this problem in menu or when I play normal movies (in 3d).
  I tried the two glasses I ask my friends to see the problem and each of them felt same question.
  My firmware is 7.1.92.61.01.1

  How can I reset firmware firmware to factory, cos it was perfect for me. Or how can I solve this problem with this firmware?

  Thank you in advance.

  Originally posted by Cimii
  

  Hi all,

  I bought a Toshiba 40L7335D, serial number 70T04380.Tv was working perfect until the last firmware update. No, I have problem.
  When I reproduce any movie in 3d or 3d demo, I have bad reproduction. Picture is blurry and a bit blurry. It was a perfect image before update. And I have this problem only when I reproduce 3d movies/demo, I don't have this problem in menu or when I play normal movies (in 3d).
  I tried the two glasses I ask my friends to see the problem and each of them felt same question.
  My firmware is 7.1.92.61.01.1

  How can I reset firmware firmware to factory, cos it was perfect for me. Or how can I solve this problem with this firmware?

  Thank you in advance.

  What version of Firmware were you using before? Although, that would NOT (!) no difference in terms of performance 3D-picture.
  None of the FW which were published in the history of this model, version had a report any upgrades of the 3D image.

  So when you say, that the previous version of SW obtained the best results, there is no reason objective for this hypothesis. Please be aware of this.

• Toshiba 40SL980G - the Youtube app after the firmware update.

  Hello

  So today, I've updated the firmware of my TV (40SL980G) and after the update of the youtube app is missing and also the social place of Toshiba places is not accessible.

  I did reset TV after the update.
  I checked the firmware download page, but this model is not which are listed there.

  Someone here could help me on how to solve this problem I would really appreciate it.

  They are probably going to change something in the places of Toshiba.

  If a new firmware update is available, try to install the latest version.
  Otherwise I recommend the service Toshiba Places in the next few days again.

• Portege R400 - Firmware update fails for 3G card

  During the Firmwareupgrade of the G 3 embedded (expedite EU870D) in my protégé R400 card, I have a power fail. The next time you start, I can't countinue with the upgrade. The card no longer works.

  The Modem and the COM Ports, I don't see in Device Manager. Is there a solution for this error? Thanks for the help!

  Pumbkin

  Why do the update of the firmware?
  You should do this only if the Vodafone SIM card does not work properly!

  I found this info that pop ups before performing a firmware update!

  + Atten-tion of the FW update: +.

  + Please do not forget to read carefully before place the FW. +

  + 1. FW update is not necessary when the Vodafone SIM card works fine in the customer environment s. run the FW update only when the Vodafone SIM card is not detected. Please note that the FW is more reversible to the previous state once updated. +

  + 2. This upgrade tool will apply to the following models with built-in 3G module: +.

  + Portege R400 +.
  + Portege R500 +.
  + Tecra M9 +.

  + 3. Please leave 3G communication and close the connection utility before running the FW update. +

  + 4. Close all applications before you run the FW update. Please DO NOT launch any application during the upgrade process. +

  + 5. Please ensure that you use an AC adapter to power the computer during the process of FW update. Power failure during the upgrade process can lead to failures of 3 G modem. +

  + 6. Please DO NOT sleep/standby extended/Shut Down the computer during the process of FW update. This can lead in mode 3G +.

  So please first these points before you is trying to update the firmware!

• Incomplete backups after the recent firmware update (ReadyNas NV +) 4.1.15

  Hi, I had the system work perfectly without any problems until he informed me of the 4.1.15 updated. I went ahead with the update and now the backups are incomplete. It stops around folders starting with Mr. to make things worse, backups are reported as successful. I checked the old backups and they do not have a problem. Is it possible for me to go back to the old firmware update? I'm not sure than I had before but and I don't know how to find out who. Model: ReadyNAS NV + [X-RAID] Serial: 23J5127N0033D Firmware: RAIDiator 4.1.15 [1.00a043]

  Should he behave differently if you select Remote: Windows/NAS (Timestamp) ?

• FS728TP attention firmware update!

  Too bad, you can ruin a good switch poe by a stupid firmware update. Tried to update my FS728TPv1 to the latest 5.0.0.8 3.0.0.22. Downloaded the zip file, you start the procedure to update with discovery of the smart wizard, message received "updated successfully"... but after reboot the switch is bricked. Did some reading, found I'm not the first guy with this case, should be updated first, startup code from 1.0.0.2 to 1.0.0.5. But it was not a code starting update file in the zip! I found somewhere on the netgear firmware french site the oldest 5.0.0.6, which contains ng_fs728tp - V5006.ros and ng_fs728tp_boot - 1005.rfb. I feel so stupid, I'm?... to open the switch box, found 88E6218-LG01 Marvel, used on some routers 10 years ago chip. anyone find a procedure to revive the switch, a tftp, a series or something connection session. I know netgear offer guaranteed for life and replace the switch, but not my case... just feel sorry a switch of the brick work

  There is a solution, in case you brick the switch to update the firmware, do not update the boot code appropriate. The boot code is some program low level similar to the bios on the card. Did some deep research on Marvel 88E6218-LG01 Chipset, I found somehow that pin 52 and 53 are Rx and Tx respectively to integrated serial UART. The two signals are 12 (Rx) and IC U27 PIN 11 (Tx). The IC and passive components around him are not soldered because the switch is not a serial console. Near U27 is the serial J8, not used. The U27 is a similar to max232 chip. The idea is to make a connection with the switch using p52 series = Rx, p53 = Tx and, of course, GND, I soldered the wires to p11 and 12 of the U27. Then do a session in Hyperterminal using baudrate = 38400, data bits = 8, parity = none, stop bits = 1, flow control = none. Power on the switch, you will see power on self-tests, boot network device based on 88E6218 software version with ARM946E-S then: autoboot in 2 seconds, press return or ESC to interrupt and enter the dance. In those 2 seconds interval if you press the INPUT switch goes to the start with 6 options menu: 1 = software download 2 = flash file Erase 3 = 4 = diagnostic mode password recovery procedure entry 5 = Set baudrate terminal 6 = back. Choose option 1) then the switch is waiting for the firmware file "code using XMODEM download, $$$ writing and waiting...". Now go to hyperterminal transfer, send file > Browse for firmware 3.0.0.22 .ros (before update wrong firmware), choose the XMODEM Protocol, and then click Send. File transfer begins, will take about 25 minutes. After that the switch restarts correctly, and discovery of the smart wizard he found. Update the firmware on 5.0.0.6 family must 1.0.0.5 to update the BOOT CODE. The boot - 1005.rfb can be found on this website: http://www.netgear-forum.com/forum/index.php?s=7d23113dd1660e3c9d613aa739513390&showforum=704 , in 5.0.0.6 zip of the firmware. Have fun...

• Is available for Equium P200-1ED optical drive firmware update?

  Y at - it upgrade for the HL-DT-ST DVDRAM GSA-T20N because I can't find as of ve and tried the 3 that appears for this model, but it bad and I need to update to the last.

  Any help with this would be great thank you.
  Dale

  I checked the manuals s and found a list of all optical disk drives compatible.
  Of course, the STRANGE in your laptop is not affected with severe dysfunction and firmware update is not necessary and also not available for download.

  Have you noticed a serious problem?
  Is there a reason for the firmware update?

• DVRW firmware update killed

  I have acquired a used model m7790y Pavilion Media PC with some problems.

  The original owner had not created the recovery disks. I was initially unable to succeed in their creation, so I ran to the recovery of the recovery partition, using the start option. That's happened. I could eventually create the recovery (on 2 discs DVD + R) media. If the drive worked there at that time.

  After that, I have treated all updates Vista SP1 til. Then, I have treated several updates HP found in the x 32 area of Vista software and driver download for the system, including an updated firmware for the optical drive from TSST. Then, I treated all other Vista updates thru SP2 and beyond. I thought that everything was fine but then I tried to open the optical drive and it did not. Then I noticed that a light shone from the reader. Windows does not currently show a DVD player device, but because of BIOS. It shows in the BIOS as the 3rd drive: TSSTcorpCD/DVD. The update of the firmware, I treated is sp35094.exe and has been marked as TSST TS-H653L DVD-R/RW Drive Firmware Update Version 0714.

  I have redownloaded update and tried to re - run. It fails, saying that the system does not have the minimum requirements for the update. As the drive is not listed in the Device Manager, maybe it's to be expected. I don't think that it produced an error the first time. Both times I ran from within Windows Explorer.

  Is it possible to fix this drive or is it now a brick?

  The device is seven years old. It's a brick.

  Replace the DVD burner with a new DVD of SATA burner. They are pretty cheap these days and about $20.00.

• Designjet 920F: 920e designjet firmware update

  I need to install an update of firmware for my Designjet 920F which is NOT on a network or on the cloud.

  I downloaded the new file on a single computer and loaded to the stand-alone computer.

  Now what?

  With the help of a USB key. Download the firmware from http://www.hp.com/go/T920/firmware , http://www.hp.com/go/T1500/firmware , http://www.hp.com/go/T2500/firmware , or http://www.hp.com/go/T3500/firmware file (depending on your printer model) into the USB flash drive and insert it into the USB Hi-Speed host port in the façade. A firmware update wizard appears on the front panel to guide you through the update process.

  Of course, if you have already downloaded a flash drive, you can omit that part.

• The C400 for W530 (2447-CN4) firmware update

  I have problems with of Micron RealSSD C400 (model: C400-MTFDDAK256MAM;) Part of Lenovo number 45N8158; Firmware revision 05TD) and wanted to update the firmware to the last, but don't see any update for the player. Y at - it update underway to develop these readers of Lenovo OEM 010 G firmware? If not, is there a method to push the firmware of the sale at retail of these readers?

  Thank you.

  ~ Aaron

  Here is the link to the firmware update http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT076505