4400 wlc 4.2.176 to 4.2.205 software upgrade

Similar Questions

• 3500th and 4400 WLC

  I find contradictory documentation; the 3500th is supported on the WLC 4400 w / version 7.x code?

  Docs, I found say 3500 is CAPWAP only so that only the 5508 CAPWAP.

  Thank you.

  Anything over version 5.2 software WLC > CAPWAP

  Anything below version 5.2 software WLC > LWAPP

  Now go back to 3500th... version minimum necessary to get the 3500 AP with WLC is 7.0 and 7.0 is compatible with the 4400... That is why 3500 is supported on 4400 running the WLC version 7.0 and later...

  This has answered your qiestion?

  Concerning
  Surendra

• Need help with the installation of 4400 WLC

  I have a client that is running 2 separate networks. One is configured with 10 LWAPs connected to a 4400 WLC by using MAC authentication. The other is 2 autonomous 1200 Series APs configured with RADIUS of a Server IAS Ms.

  The customer wants to combine the WLANs separated in 1; Indeed, integrating all the APs the WLC, RADIUS configuration for all and maintain the 2 separate SSID.

  Is this possible with the 4400 series? If so, could you please direct me to the guides for this configuration.

  1 convert 1200 Series APs in LWAPs

  2 configure the RADIUS about WLC 4400

  3. set up 2 separate SSID on 1 WLC times by using the same authentication method

  4 change the if necessary air on MS Windows 2003 IAS RADIUS

  1 convert 1200 Series APs in LWAPs

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html

  2 configure the RADIUS about WLC 4400

  http://www.Cisco.com/en/us/products/ps6366/products_configuration_example09186a00808e5d6b.shtml

  3. set up 2 separate SSID on 1 WLC times by using the same authentication method

  > This should be fairly simple...

  4 change the if necessary air on MS Windows 2003 IAS RADIUS

  There are several examples of IAS here configuration:

  http://www.Cisco.com/en/us/products/ps6366/prod_configuration_examples_list.html

• General questions about Cluster 4400 WLC

  I have inherited some 4402 wireless LAN controllers and I am in charge of making their ship-shape. So I have a few general knowledge wireless, I have not worked with before wireless controllers and have a few issues with that I was wondering if someone could help me:

  (1) how can I check that the primary and secondary controllers are configured for failover without actually performing a test? Both have AP failback enabled, but I don't know what else to check.

  (2) they are running code 3.2.116.21. If I want with 3.2 or plan to move up to 4.X?

  Thanks to a bouquet. I'm slowly working my way through the docs and the answers to them would of course speed up things.

  Hi Johnny,.

  I hope things are well with you! The steps required to set up relief AP are detailed in the attached doc. I would always try to provide a Maintenance window to test this point, rather than not knowing for sure :)

  WLAN controllers to access tipping points light Configuration example

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a008064a294.shtml#C4

  Now, for your second question, it is likely that you will want to upgrade the WLC to a version more recent code. They have passed through 4.0.x, 4.1.x and newer 4.2.x. 3.2 is a fair way behind. Take a look at the WLC Release Notes;

  Series 4400 Cisco Wireless LAN controllers Release Notes

  http://www.Cisco.com/en/us/products/ps6366/prod_release_notes_list.html

  I hope this helps!

  Rob

• Routing capabilites of 4400 WLC

  Do WLC 4400 has routing capabilities... ??

  as I m using WLC 4402 for AP association and management of clients and router that provides the interface of L3 for AP and Client for routing there subnets. It is possible by only using WLC for AP and Client Mgmt and removing the defect of a road?

  Concerning

  Hitesh salvation,

  The WLC 4400 is a device that attaches to your network, but does not work as a router. There must be a layer 3 device routes packets between the VLANS. The WLC maps the SSID of the VIRTUAL LAN subnet clients and put their return on the interface of management for upstream routers to route the packets.

  http://www.Cisco.com/en/us/products/ps6366/products_qanda_item09186a008064a991.shtml

  I hope this helps!

  Rob

• about 4400 WLC

  Is AIR-WLC4402-12-K9 offers gigabit over copper connectivity?

  Hi Fernando,

  The 4400 series WLC Yes provide gigabit over copper via a SFP (small form pluggable).

  Please see the link below:

  http://www.Cisco.com/en/us/partner/prod/collateral/wireless/ps6302/ps8322/ps6307/product_data_sheet0900aecd802570b0_ps6366_Products_Data_Sheet.html

  I hope this helps.

  Best regards

  Andrew

• client DHCP issues with 4400 WLC

  The ACS authentication works very well.

  Clients cannot obtain an IP address from the DHCP server.

  DHCP server is configured on a dynamic interface but is on a different subnet located in a branch office. The DHCP scope is running on a switch 4500 in the branch.

  It is preferable to have DHCP works on internal WLC or near the WLC, rather than DHCP server at the remote location?

  TIA

  Generally, you don't want to have a dhcp server on a remote site, but it should also work as wired users are able to get an IP address from the remote dhcp server. Preferred, as I have said, is to have a local dhcp server, but if this does not work for you, then by configuring the wlc to bbe a dhcp server is not a bad thought either. Some, like to have more control over the dhcp.

• Cisco 4400 WLC - access web GUI remotely

  I know how to access the graphical interface from the service port. However, I am not able to access the site of Port 0. IPs have all been set correctly. We have a management VLAN in our company. I have configured the management interface of WLC for an ip address from that subnet. Port 0 is connected to a switch of 3560 G. I put the switch port to a port of access to the management of VLANs and I tried to make the switch as a trunk port, with the vlan native on the vlan management. I'm not able to ping, or access the web GUI remotely through the management VLAN. Is it normal?

  Jeff

  Hi Jeff,

  Please try to set 0 as vlan on interface of management on WLC after configuration of vlan native on the switch. If you have not yet tried.

  order - management configuration interface vlan 0

  Note - You must children all wlan r mapped with management interface before any change in CLI.

  hope this will solve your prob.

  Thank you

• RADIUS & WLC 4400 account management

  Hello

  We have a 4400 WLC, validate users against FreeRadius. Don t of RADIUS accounting messages appear the names of TOUR but the MAC address of the APs. Is it possible to change this behavior?

  Thank you.

  Hello Daniel

  In Radius Accounting Request packet, NAS-identify attribute must be able to provide the name of the Radius clients. If the NAS-identify attributes to come in packages of accounting, then it will be visible.

  Thank you

  Nelson

• WLC 4400 not authetnicating between the COMMENTS and private networks

  Hello

  I have a problem. I have a 4400 WLC and the meeting I m problem is that when an authetnicates of user to the private network, then tryies to autheticate the guest network, it just stays there, it does nothing. All around, if authenticate you with the network of comments and change the private network, it just sits there. I have showing that the problem is with the authentication, but do not know if I m correct.

  Can someone help me? What ifnormation will take to recover from the WLC see there the rub?

  I'll get the debug mac addr and repeat the question to see if I get anything for the customer.

  Thanks for the help

  Tony

  I would check if his blocking on obtaining IP address or authentication. Probably try to manually set the IP address if you switch between networks and see if works.

• WLC 520

  Hello

  I've updated AP 1131AG-E-K9 Cisco to LWAPP image. The AP received ip from the DHCP server and broadcasts the discovery LWAPP packets but my Wireless Lan Controller seems to being scrapped. I get:

  Sep 25 15:08:41.340 spam_lrad.c:1286 LWAPP-0-MSGTAG095: throw Discovery Request Packet to AP 00: 1 d: a1:ec:65:98

  the newspaper messege.

  Thank you

  Hi Murat,

  Unfortunately, the WLC 526 only supports the 521 LAP. No other models of AP (like the 1131) cannot be used in this solution. And vice versa the 521 will not work with other models like the 4400 WLC.

  Q. what access point products are included in the Cisco Mobility Express Solution?

  A. two Cisco 500 Series Wireless Express Access Point products are in the Cisco Mobility Express Solution; their part numbers follow:

  • AIR-AP521G-x-K9 (autonomous access point)

  • AIR-LAP521G-x-K9 (access point on controller)

  The material for these products is the same. The products have different software, but the access points can be converted from stand-alone mode to the mode on the controller with a simple software upgrade.

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps7306/ps7319/ps7338/prod_qas0900aecd8060c860_ps7320_Products_Q_and_A_Item.html

  As a central element of the Cisco Mobility Express Solution, the mobility controller is designed to specifically support Access Points Express 500 series wireless Cisco.

  http://www.Cisco.com/en/us/products/ps7320/index.html

  I hope this helps!

  Rob

• Problem with WLC and a 3rd-party NMS SNMP AP Assoc/cancellation interruption

  Hello

  I'm troubleshooting an issue, why our NMS is not able to automatically clear an alarm generated trap of an AP that has been separated and is associated with again.

  When debugging on the WLC snmp trap generation, I discovered that when the AP disassociates the WLC sends the trap of bsnAPDisassociated , which is perfectly defined and I can also find in the SNMP Object Navigator. However when the AP reassociates again the WLC sends the ciscoLwappApAssociatedtrap.

  Part 3 NMS is not able to understand it, but our WCS system does, that's why I then took a peek in the MIB file installed.

  I discovered that ciscoLwappApAssociated is a sheet of ciscoLwappApMIBNotifs (1.3.6.1.4.1.9.9.513.0. 4), which I have neither

  Cannot be found in the Cisco SNMP Object Navigator or the downloadable MIB.

  As the MIB in the WCS is a XML file I didn't how to get information in the 3rd-party NMS.

  Anyone have any idea on how to solve this problem or there at - it update CISCO-LWAPP-AP-MIB available somewhere?

  Our WLCs are running the latest version of the software (7.0.116.0) as well as our WCS (7.0.172.0)

  Thanks in advance!

  Kind regards

  Patrick

  Such discrepancies sometimes occur. Best is a matter of TAC in order to tackle the problem through a bug or have a new MIB published on cisco.com if necessary

• Cisco 526 Wireless Express Mobility Controller

  We just bought to UC520, 526 and a LAP521 controller. We got the UC520 upward and running in 15 minutes, but the 526 does not include a lot of documentation. Can not have find the 521 AP on the network nor will it set the layer mode 2. I don't want to configure routing for a 4 Office of PC couche3. During installation, the only option it gives is layer 3 and the documentation says it will make layer 2? Can someone give me any assistance?

  First of all, set up like you would a 4400 WLC or 2106. I will attach the link configuration guide here for you.

  http://www.Cisco.com/en/us/docs/wireless/controller/4.1/Configuration/Guide/ccfig41.html

  Many of the advanced features are disabled on the 526 but you set up substantially the same.

  Dennis

• WCS 4.2 - customer account

  Hi all

  The deployment currently LWAPP project consists of 240 APs. I have 4 unit of 4400 wlc and managed through wcs 4.2.

  The problem is, I can't get the number of customer goes to the Toilet. Even when there is connected clients the Dungeon page and graph showing the number 0.

  I can see the good count via WLC customer individual web Mgmt. It is quite disappointing.

  Any who have addressed this problem before?

  Very grateful for the help!

  I've seen this when the code of the controller version was to 4.1.x and WCS was running version 4.2.

  Once we upgraded wireless controllers, the number of customer was right.

  Hope this helps,

  -John

  (Don't forget to rate helpful messages)

• LAP1131 can not join WLC4400

  Hello world

  I am trying to deploy a 4400 WLC with several LAP1131, but I have problems: the APs cannot reach the controller.

  Before you begin this conversation, I read the documentation, the option DHCP set 60 and 43 with the appropriate values, verified that I ping the WLC of AP, manually set the LWAPP... but there is no way. The error message is:

  LWAPP_CLIENT_EVENT: spamResolveStaticGateway - bridge found

  Sent Msg Type: DISCOVERY_REQUEST

  MSG length: 21

  MSG SeqNum: 0

  LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: could not find any MWAR

  Reading the forums, it seems that "could not discover MWAR" means that the AP cannot reach the regulator but, what can I do else?

  WLC4400 version: 4-1-185

  LAP1131 version: c1130-rcvk9w8-mx 12.3 (11) JX1

  Any help?

  Dani

  Hi Dani,

  Just a note to explain this behavior;

  Q. my 1131 lightweight access point (LAP) does not record with my controller 4402 LAN wireless (WLC). What can be the reason for this?

  A. a common reason is that the Mode of Transport Lightweight Access Point Protocol (LWAPP) is configured on the WLC. A WLC 4402 can operate in mode of layer 2 and layer 3 LWAPP. Whereas, in a TOUR of 1131 can operate only in layer 3 mode. Mode Layer 2 is not supported on the KNEES of 1131. If the WLC is configured with the Mode of Transport LWAPP layer 2, then your KNEES not to join the WLC. In order to overcome this problem, change the Mode of Transport of the WLC of layer 2 layer 3 LWAPP.

  In order to change the Transport LWAPP Mode using the user interface, go to the WLC page and locate the second selection in the main field, which is the LWAPP Mode of Transport. Change this layer 3 and restart the controller. Now, your TURN is able to register with the controller.

  This doc. good Q and A

  http://www.Cisco.com/en/us/products/ps6366/products_qanda_item09186a008064a991.shtml

  I hope this helps!

  Rob