4402 wireless controller and the 1130AG access points

Similar Questions

• [Wireless-Vista] Disable the automatic access point.

  Right then, I had this problem when you play any kind of online game, what microsoft calls a 'feature', when I play a game online, I get a 5seconds or until disconnecting lag spikes every 1-5 minutes, making it impossible to play counter-strike, Call of Duty Modern Warfare 2, Battlefield 2 and all these sorts of FPS games. I read on this vista of "paintings" Wi - Fi point automatic scan has, so I tried with impatience to deactivate, without success, I even once turned off automatic TCP/IP that crashed my computer, so now I'm wondering, how in the world am I supposed to play a game with spikes of major shift due to a malfunction of the so-called?
  If there is a way to turn it off, remove, or simply work around, tell me. I don't care if it is not allowed, because I got it with feautures of microsoft...

  sckizman,
  Have you ever been able to play games online with this computer?
  What version of Vista and what service pack you have?
  You are able to surf on the net normally or you we lag with almost anything on the internet?
  If you have not yet done so, perform a clean boot , and then test your access.  Also make sure that your system BIOS and chipset drivers are up to date.

  Here are instructions on disabling automatic switching between wireless access points:

  Prevent your computer from switching between wireless access points

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 wireless emphasizes the connection to the wrong access point

  I use a model of wireless USB Netgear WN111 with Windows 7 64-bit adapter, connect to a D-Link wireless access point.

  Every time I have connect or wake the computer from sleep, he insists on connecting to the wrong access point - it connects to an unsecured Linksys device somewhere within the range.  I then manually connect to the correct access point - my D-Link.

  I went into the network sharing Center > manage the wireless networks and removed the network Linksys of rogue, but it always comes back.

  Any ideas or advice?

  Hello

  I don't know why he keeps picking up the 'rogue' network after that you deleted. My Windows 7 does not behave like that, and my research can reveal a way that I could do. Maybe someone else can tell you why he does. However, as a solution, you can try the following in manage wireless networks...

  1. do not remove the network of thugs, move it to the bottom of the list all the way down.

  2. open the rogue network properties and uncheck the box "connect automatically when this network is in range.

  3. open the properties of your network and check the box "connect automatically when this network is in range.

  4. you can even try to untick "connect to a more preferred network if available" both networks.

  Please mark this as useful or response if applicable.

  Tricky

• How can I reset or fix my router wireless or (lost the ability to connect wirelessly to the internet) access point

  Wireless hub works, other computers are connected

  On a laptop, I lost the ability to connect wirelessly to the internet (message: limited connectivity)

  Recommended by the system solution: reset or repair your access point or wireless router

  How can I do?

  I think that what you aim for is "power cycle".

  To do this, simply unplug the router/access point power adapter. Wait a minute. Then reconnect it.

  Hope this helps

  Post back if necessary

  ___________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Ordered the wrong access point!

  I thought that I had ordered a 1130ag but looks like I ordered a 1131ag LWWAP.

  Please could someone tell me what the difference between a 1130 and 1131. I understand I can load the IOS on the light AP software using a tftp server, but I do not know which exit to load on this subject. 12.3JX, 12.3JA, 12.3JEA, 12.3JEB! can anyone help please? either by the way, I am in the United Kingdom, do not know if this affects image to install. Thank you.

  Hi Paul,.

  This happens all the time, so it shouldn't be a problem :) I'm guessing that you have received this AP - AIR - LAP1131AG - x - K9 LWAPP. When you really wanted this AP - AIR-AP1131G-x-K9 Cisco IOS software. Look at the comparison;

  http://www.Cisco.com/en/us/products/ps6087/products_data_sheet0900aecd801b901c.html

  That being said, you should be good to go with 12.3 (11) JA1.

  To access Cisco Aironet to Cisco IOS version 12.3 Points (11) JA1

  http://www.Cisco.com/en/us/docs/wireless/access_point/iOS/release/notes/b11jar1n.html

  Cisco IOS version 12.3 (11) JA1 supports 32 MB independent platforms. 16 MB platforms and platforms supported by Cisco IOS version 12.3 (8) JA and earlier versions (350, 1100, 1130, 1200 and 1230 access points and access point/bridge 1300 series) are supported by Cisco IOS version 12.3 (8) JEA1.

  Do not install a "JX" (it is a software image support to upgrade and recovery Cisco Lightweight Access Point Protocol (LWAPP));

  These release notes describe features, improvements, and caveats for Cisco IOS release 12.3 (11) JX1.

  Note: This version must be loaded on points of access to the plant or by using the lightweight stand-alone mode upgrade tool. Your access point may become unusable if you install this software without using the upgrade tool.

  http://www.Cisco.com/en/us/docs/wireless/access_point/iOS/release/notes/b311jx1.html

  Returning to standalone Access Point

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272

  You can convert an access point of the mode light return to autonomous mode by loading a Cisco IOS version that supports stand-alone mode (Cisco IOS release 12.3 (7) JA or earlier version). If the access point is associated with a controller, you can use the controller to load the version of Cisco IOS. If the access point is not associated with a controller, you can load the version of Cisco IOS using TFTP.

  By using a TFTP server to revert to a previous version

  Follow these steps to return mode LWAPP stand-alone mode by loading a version of Cisco IOS using a TFTP server:

  --------------------------------------------------------------------------------

  Step 1 the IP address of the computer on which the server software runs TFTP should range from 10.0.0.2 to 10.0.0.30.

  Step 2 make sure the PC contains the file access point (for example, c1200-k9w7 - tar.122 - 15.JA.tar for a 1200 Series access point) in the TFTP server folder and the TFTP server is activated.

  Step 3 Rename the access point image file in the folder of the TFTP server c1200-k9w7 - tar.default for a series of 1200 point, c1130-k9w7 - tar.default of access for a series of 1130 access point and c1240-k9w7 - tar.default for a series of 1240 access point.

  Step 4 connect the PC to the access point using an Ethernet category 5 cable (CAT5).

  Step 5 disconnect the power to the access point.

  Step 6 push the MODE button and hold the button while you reconnect power to the access point.

  Step 7 hold the MODE button until the status of the LED turns red (approximately 20 to 30 seconds), then release.

  Step 8 wait until restarting access point, as indicated by the LEDs become green followed the status LED flashes green.

  Step 9 after the access point reboots, reconfigure using the GUI or the CLI.

  This doc.

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272

  I hope this helps!

  Rob

• Helps to configure a Cisco 4402 wireless controller

  Hello

  I need help setting up a Cisco 4402 Wireless Controller. I want to have users automatically connect to the wireless network, but not to have access to all the resources network until they open a web browser and provide their domain user name and password or a guest account provided by the receptionist.

  I tried many different configurations but can't seem to make it work properly. More time then not when I put on the WIFI network security it causes my wireless network to disappear from the list of wireless avaialbe.

  Here's my network configures:

  1 - 4402 wireless LAN Controller

  2 - Aironet 1130AG antennas

  1 - 5510 cisco ASA

  1 - 4503 core Router\Switch

  8-2960G switches

  Windows domain Server 2003 with RADIUS running on the domain controller.

  Thanks in advance for the help.

  Glad you got it working...

• Windows 7 PCs are not connected to the closest access point

  Windows 7 PCs are not connected to the nearest access point.  Any ideas?

  For example:

  We have AP 1 and 2 of the AP for exaple.  They have the same SSID.  AP 2 is further with a bad signal.  AP 1 is closest with an excellent signal.  Why my laptop does not connect to the AP 1?

  You MUST use the same SSID.  I think that you misread my post.

  And Yes, a channel problem is that what I have proposed.  You can try to configure access points using the 3 discrete channels (1, 6 and 11) to minimize any overlapping units to the same channel coverage.
  At least this is the traditional way, we do it, although the automatic selection increases common and 11n 40 Mhz channels (if defined in this way) are also in.

• How to install logitec mouse wireless receiver and the software driver CD?

  How to install logitec mouse wireless receiver and the software driver CD?

  http://www.Logitech.com/index.cfm/support_downloads/&CL=us, fr.

  There is a link on the site above to contact Support Logitech technique.

  See you soon. Mick Murphy - Microsoft partner

• Wireless adapter installs - is msg not found wireless adapter and the adapter never turns on.

  HP desktop system

  Windows Vista

  Router DLink and compatible adapter for Windows 7

  Inserted the disc and MS for installing drivers appears

  Microsoft window pops up saying: these data are incorrect.

  Install the drivers updated the site Internet DLink and still wont

  SE msg not found wireless adapter and the adapter never turns on.

  Hi JRKellison,

  1. What is the model number of the router?
  2. What is the full error message that you receive?
  3. This is the first time you install it on the computer?

  Check and make sure that the adapter is properly connected to the computer.

  I suggest that you try to install the driver using compatibility mode and check if it works.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

  installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

  Wired or wireless - is usually not serious unless the wireless can get more interference.  If the keyboard is close to the receiver which is connected to the computer and you get the strikes hurt - my suggestion is to try first the keyboard on another computer.

  To do this, * not * require you to install specific drivers.  Simply unplug the combo of a computer and in the other and see if the keyboard works correctly.  Then, you can troubleshoot from there.

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• Smartphones blackBerry HS-655 + wireless headset and the "BOLD"

  I have the HS-655 + wireless headset and the "BOLD" and I want to know why I can't listen to music using my bluetooth?

  You need a STEREO BLUETOOTH for listening to music, with a simple bluetooth, you can not.

  Read this link

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04009&sliceId=SAL_Pub...

• LEAP and EAP-FAST in the same access point

  Hello...

  We have an infrastructure based on 1142 APs.  Now, they have set up an SSID with JUMP as an authentication mechanism.

  The infrastructure is not a wireless LAN controller, access points are configured as standalone APs with SSID configured in each of them.

  The mechanism to authenticate the windows with JUMP positions was a little tricky.  We need now to migrate all stations to EAP-FAST, but without loss of JUMP environment during the migration.   You have to configure the APs to serve the two authentication mechanism: LEAP and EAP-FAST.

  Is it possible to have it?

  What should we do about it?

  Thanks in advance...

  For autonomous APs. If you are using:

  Authentication open EAP protocol

  Network EAP-

  It accepts virtually all EAP types, not depends on the radius server to have all active... for example EAP methods, if you are using ACS may the PEAP LEAP EAP-FAST, EAP - TLS at the sametime...

  So no matter what, the customer's server and the RADIUS wireless must match the EAP type configured... any type of EAP, the AP should support it...

• The router access point wireless bridge

  Hi I recently moved into a new building which has a few hot spots for the Internet connection is included in the rental price. I don't have a model of linksys Cisco wireless-G broadband router. WRT54G2 V1 and I am trying to create a wireless bridge between the point of interest (I have my own Unique Internet identifier) the router, which is then connected to my office using an Ethernet cable.

  Can I create a wireless bridge, if yes, how can I do this?

  Thanks in advance

  The router (WRT54G2 V1) does not have a capacity of wireless receiver so you will need a separate ethernet bridge.

  Your installation should be like this:
  (((WiFi)))---> (((pont Ethernet<-wired connection-="">routeur Linksys<-wired connection-="">ordinateur de bureau))

  I hope that makes sense. XD

• Deployment of ISE in the wireless infra WLC (single 1240AG Access Point)

  Hi all

  I am having access point 1240AG and plans to deploy ISE as external radius server. I would like to know how must set up in AP/ISE deifferent authorization policy. If I can use named ACL or VLAN (CoA) as an application types without use of WLC. If so, how?

  Thanks in advance.

  No it's not possible, because the ios code that access points operate in stand-alone mode do not support change authorization (CoA). They will authenticate the user, and when a coa event is fired to ISE, that's when this deployment is broken and gets it lost.

  Thank you

  Tarik Admani

  Post edited by: Tarik Admani