4500 wireless printer shells print screen retouching

07/03/2011.  My printer wireless HP 4500 shells edited print screen files.  I use print screen key to copy an image of Web site or others.  I'm going to Microsoft Word.  I then paste the copy on the page of Microsoft Word.  I open the image 'toolbar' by right clicking on the upper right top blue line white area toolbar page Microsoft Word just below the horizontal and then check on the picture.  The symbol #, I change the graphic on the screen.  I cut 2 inches up and down 3 inches I don't don't need or want.  Can I activate print (one copy) and it prints instead the bottom half of the original graphics pasted.  He hits, what is on the screen that I have edited.  I've found that I can first paste the copy print screen in Irfanview, edit it register as a graphic file and which insert on the page of Microsoft Word.  The printer then prints what I edited in Irfanview.  I tried to save the Microsoft Word file asnd close it and then try to print but the printer again made the same typo.  Thank you for your help and suggestions.  C Yopst. Chicago suburbs

09/03/2011. Wednesday.  Thank you for your help.  I went into Hewlwtt Packrad downloads for wireless Officejet 4500 G510n-z printer and downloaded and installed an updated complete driver OJ4500vG510n - z_Full_13_en.exe.  That solved the problem.  C Yopst

Tags: HP Printers

Similar Questions

  • How to print from iPhone / iPad for Officejet 4500 Wireless printer?

    I would like to print from my iPhone / iPad on my Officejet 4500 Wireless printer.  Y at - it an iTunes app I need to download?  My printer works fine print wirelessly from my desktop, just do not know how to print from my iPhone / iPad.  From what I read, it seems that this printer is not enabled for Airprint.

    Hello

    You can print from iOS using HP ePrint home & Biz.

    You can find more details below:

    http://support.HP.com/us-en/document/c02775166

    Kind regards

    Shlomi

  • HP 4500 wireless printer: printer all-in-one cannot scan glass

    My hp 4500 wireless printer worked fine until it just stopped printing.  I reintstalled the original installation disk and printing has been repaired.  However, the desktop icon for the hp Solution Center, which allows scanning of computer files, has not been activated, and accordingly, I am unable to scan from glass.

    New driver from HP site could not install completely and still have the same problem.  I tried to reinstall the existing drive, and it is still able to print, but still can not sweep.  The desktop icon is always off.  Didn't test the fax.

    I have here an updated driver that contains the implementation complete for the 4500 Wireless: G510n-z

    My system is Windows 7 64 bit.

    Please answer.

    Hello @rudetom,

    I would like to see if I can help you get your Officejet 4500 Wireless software working again.

    Looks like pieces of old software is causing the installation to fail. I would like to clean at the far (unisntall) and try again.

    When you have uninstalled the printer software, it is possible that pieces of it may remain which could interfere with a reinstall. I recommend referencing the steps described in this document to make sure that you haven't missed anything whatsoever; Uninstalling the printer software. * If you are connected with a USB cable, be sure to unplug it.

    You can also delete files using disk cleanup - take care to put check marks in selection boxes when it is available.

    Software drivers can hide other places would be in your device manager.

    To open Device Manager:
    ' 1) click on start (Windows icon) and enter the Device Manager "in the search field.
    2) click on Device Manager.
    (3) you can click on View, in the upper windows and then show hidden devices.
    (4) to develop the types of devices and check for any pilot associated with your printer.
    (5) to remove a device from Device Manager, right click on the device name in the list and then click on uninstall.

    For more information, see device for Windows 7 Manager information.

    Once you have removed everything, I restart your computer and then try to download the new software again to HP Officejet 4500 Wireless - G510n full feature software and driver.

    If you still have problems, please let me know what kind of error you get and how your printer is connected to your computer. What is direct installation USB or wireless?

    Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

    I look forward to hear from you!

    Thank you

  • The Officejet 4500 wireless printer can work wireless with a Wireless N Router?

    My Officejet 4500 Wireless printer worked fine with my router wireless of the B of aging, but when the latter died, I replaced it with a Wireless N router, the 4500 is possible to work with the N Wireless neworking Protocol?  Thanks for your help.

    Hello, you printer HP Officejet 4500 Wireless all-in-One Printer - G510n cannot work in the band ONLY, but your new router can be configured to accept the 802. 11b / g wireless protocols and be able to continue to use your printer. Just check the manual of your new router to enable this feature, it is easy and does not affect the performance of your wireless network.

  • HP Officejet 4500 wireless printer does not appear on the control panel

    My HP Officejet 4500 wireless printer does not appear on the control panel.  How to fix it.  I have a laptop Toshiba and Windows 7 Home Premium OS.  Help, please.    rwillm

    Hey,.

    Thanks for the update, rwillm.  It seems that the installation of the printer can be a little messed up.  If the printer software is always installed, but simply lacks the printer, then I would advise to do a little cleaning before choosing to add the printer back.

    • Make sure that the printer is deleted from the file devices and printers
    • Click on one of the remaining printers folder
    • Select the properties of the print server at the top of the window
    • Click the tab drivers
    • Remove all drivers in this window for the Officejet 4500

    Also check in the Device Manager to verify that there is no mention of remaining of the 4500.

    • Click on the start menu
    • Right click on computer
    • Select manage in the list
    • Click Device Manager in the list of questions on the left side of the window that opens
    • Click the view at the top of the menu, and then select Show hidden devices
    • Remove all references to the 4500 in the list of devices

    After making sure of the device is gone, I recommend bike devices in the power circuit: router, computer and printer.

    * Make sure the printer has a valid IP address after switching back on and is connected to the same network as your PC before adding the printer.

    If the IP address and SSID are good for the printer, then try to add the printer with the printer software, you have installed.

    • Click on the Start Menu
    • Click on all programs
    • Open the HP folder
    • Open the folder for the series of the Officejet 4500 G510
    • Select Add a device option

    Let me know how it goes,

    Jason

  • HP Officejet 4500 Wireless printer says it is offline

    Original title: HP Officejet 4500 Wireless printer

    My printer is offline and I cannot print. How can I get this back online?

    Hi David,

    I suggest to consult the link below and follow the instructions for Windows 8.

    "Printer is off-line" Message appears on the computer and the HP printer does not print

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02221706&cc=us&DLC=en&LC=en#N7283

    Hope that the information has been useful, if you have any other questions, feel free to post. We will be happy to help you.

  • OfficeJet 4500 Wireless prints garbled .pdf files

    I got this 4500 Wireless installed for a few months now, and recently, I noticed the problem when printing multiple-page PDF files. It usually starts to feel very well, but after a page or two, it will start the printing of random characters, but keeping the right format. Sometimes, there is just a line interspersed that is right, but the majority of it is just rubbish. I am running Windows XP SP3. Any idea of what is the cause?

    Crazy text isn't good. Try the steps outlined in the article below and let us know if it helps.

    http://support.HP.com/us-en/document/c01954177

    Good luck!

  • You want to install the HP Officejet 4500 Wireless printer on Windows 7 computer.

    Victorinox original title: new printer.

    I bought HP Officejet 4500 Wireless to print from my Toshiba with Windows 7 laptop and it says that it cannot find the driver.

    Question? Did you go to HP to download your driver? "If not here is a link you can use to download the new drivers from HP and then try to install their: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3986399&lc=en&cc=us&dlc=en&lang=en&cc=us&submit=Go%20 A.

    First of all, I would like to remove all the drivers you may have put in the computer laptop everything first before new installation then see if you can print.

    Hope this helps

  • Officejet 4500 wireless printing fails even if connected

    I have an Officejet 4500 G510n z connected to a wireless network.  The wireless network is on a different subnet than my cable network.  I can ping and navigate on the admin page to the printer from another laptop wireless but I can't ping or connect to my Wired subnet admin page.  I am able to ping my desktop wired to other devices on the same wireless subnet.   Help, please.

    Hi 2243588,

    Because the wireless network is on a different subnet so your wired network and your printer is located on the wireless network, the printer will be able to communicate with devices on the wireless network.

    To resolve this problem and allow all your devices communicate with each other, you must be on the same subnet. There is no real reason to implement 2 subnets unless you have more than 255 computers. The essence of subnetting is to reduce your broadcast domain when you manage a large network. Is there a reason that you use 2 subnets?

    I found a thread that you may find useful, please take a look > establishing a network with 2 subnets.

    I hope this helps.

  • Officejet 4500 wireless printing problem

    We have a laptop HP Pavilion g7, which has always worked a lot with our wireless 4500 printer.  Now the computer says the printer is offline.  The wireless button is blue.  Hard computer connected to the printer shows that it is online.  What else am I missing?  Can anyone help?

    We have removed one then reinstalled the HP printing software and it works again. Thanks a bunch

  • Re: Resizing of printing problems on my HP Envy 4500 wireless printer

    Is there a firmware update for the HP Envy 4500 for Mac OS X 10.6.8 users?  Expansion has worked well until recently. I solved the problem extends last week by turning the printer off, unplug from the wall, wait a few minutes, reconnect, turn on, and then you use tools to reset the printer to its default settings.  That did not work today.  I downloaded again the driver of HP and re-installed, but I can not enlarge copies.  I sw this message stream, but cannot find how to download an update of the firmware, since I'm on a Mac computer. Please notify.

    Hi @garden-2009.

    Welcome to the HP Forums!

    I noticed that you have problems with the resizing of the copies with your HP Envy 4500 printer. I'm happy to help with this problem!

    To download the latest firmware, please consult this guide, get printer updates for HP Deskjet Ink Advantage 3540, 4640, HP 4500 ENVY and HP Officejet 4630 e-all-in-one printer series.

    I would also be sure that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

    Let's start with these two steps and see what happens!

    Thank you for posting!

  • HP Envy 4500 wireless printer: HP 4500 wireless

    Help...   I recently moved and I can't find my printer cable that goes into the decision, anyone happen to know where I can buy one of these threads?

    Hello

    It is the following?

    You can buy at any electrical shops in your country. Ask a cordon around 10Amp.

    Kind regards.

  • OfficeJet 4500 wireless print photos in black and white only, not color.

    Color photos print in superb B & W but not color. Color cartridge is new and good impressions pictures, red, green and blue words in a program processing perfectly, just no color. Any ideas?

    OK, I them opened in Picasa Photo Viewer after 'configuration', and they print well in life glorious color now. And SURPRISE! It's on Kodak photo paper!

    Thank you

  • Resizing of printing problems on my HP Envy 4500 wireless printer

    I am trying to expand a boss. I went to the copy function & then the function of resizing and enlarged to the size I want then when I try to print I get a picture of a piece of paper with little up & arrows and nothing happens, it will not be printed. At the beginning it was printing, but not extended just fits the original size, and then he began to make the paper arrow image and printing of do not. Help! Thank you

    Hi @Lovebears

    I can't help but wonder if the firmware of the printer may not be up to date. Please use the following link to update the firmware;

    Is the Version of Windows on my computer 32-bit or 64-bit?

    This Firmware update improves and addresses the following issues:

    • Regular license of delivery/pads
    • Improves the reliability of your device connectivity
    • Corrects the minor defects

    Also, you have the printer connected directly to a wall outlet or is a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

    In this document, you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

    ↑ This is not limited to the Laserjet printers.

    I hope this helps.

  • HP Officejet 4500 wireless printer

    When I click on the printer icon to print something my printer puts a blurred page with letters!

    I can "figure out why it is doing this... Please help!

    Hello! Welcome to the @Twiggy212 forums.

    I understand your print outs come out showing the blurry letters.

    I want to help you! My suggestion for you would be to try all the steps in the guide below for print quality problems.

    The streaks of ink fixing, faded prints and other common print quality problems

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

    Happy Monday

Maybe you are looking for

  • Code 5,156,61

    I have a Canon Pixma MG3222. Everything works fine, except the scanner. The scanner worked fine about two weeks ago, but now I get a message: "cannot communicate with the Scanner for the following reasons: Scanner is offline.". USB is disconnected. T

  • Profile connection disappears but files still on PC, how to restore the profile?

    Vista 64 b.  In the process of recreation of image factor after a virus.  A ran the Dell factory restore and had followed a Windows update several times as needed.  Through the upgrade of Windows, I was up to SP2 with all current patches.   When you

  • I get BSOD, Multiple_IRP_REQUESTS_COMPLETE and sometimes SQL_NOT_LESS_OR_EQUAL all the time randomly.

    I recently got new hardware,Radeon HD 6950 video cardCorsair Dominator GT DDR3 4 GB to PC15000MSI P67A-GD65 MotherboardIntel i5 processor I installed everything on the disk, but when I went into my browser I instantly BSOD Multiple_IRP_REQUESTS_COMPL

  • greetings workshop deluxe installation

    I recently got my laptop fixed & I tried to reinstall the deluxe Greetings Workshop, but I get a message that says: "Greetings Workshop does not work because one of its components is missing.  Restart your computer and re-run the Setup program so tha

  • Documentation on the establishment of a PowerEdge R710 from scratch

    I got a PowerEdge R710 with no hard drives (and out of warranty). I added 6 WD RE3 1 TB disks. I'm new on PERC controllers and don't know how to start the implementation of this table. The only documentation I found was Dell PowerEdge RAID Controller