Documentation on the establishment of a PowerEdge R710 from scratch

Similar Questions

• Impossible to install the new Windows XP Home edition from scratch on Tecra S3

  With F6 in WXP install driver Toshiba raid (from USB floppy drive) properly installed first, partionating disc ok, continue to install Windows XP Home edition.
  WXP wants then again Toshiba raid drivers, installing WXP because he's not reading USB floppy (undirected). Do I need the recovery CD that I don't have.

  Hi guys

  I had a similar problem installing RAID on my old Qosmio.
  I didn't use the restore CD but the simple Microsoft Windows Boot CD.
  The problem was my incorrect installation procedure.

  After the installation of the driver the USB FDD drive RAID, the configuration of the installation works fine until I formatted the HARD drive or partition.
  This has been bad! Don't format or delete the partition after installing the RAID driver!

  In addition, make sure you use the right set of RAID! These settings can be checked in the BIOS! My Qosmio user manual provides lots of information about RAID. Did you check your user manual which settings are required to install the OS of Win CD?

  Do and good luck!

• locked out since my live account, went into the forum to get a discount from scratch and never had

  my child had caps lock on what signing me in so locked my windows live account, icreated another account so I could SecurityCenter and must fill out a lot of details to prove his my account then given a code to enter a temporary private forum. received the link in my new account, entered my code and then msg left and details. Then, I received a msg in the forum that my details have been varified and they sent me a link for resetting my new account for my old man. I didn't wait until nxt day n still no msg so I went bk in the forum n responded by saying em it, it is now 4 days that iv n had no response in return and no connection reset. fact no matter what I do

  Hi jaynemason,

  Since the problem is associated with the Windows Live account, you will need to wait for the response from the Windows Live support.

  Check out the link using Windows Live:

  http://windowslivehelp.com/product.aspx?ProductID=1

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Wake up the PowerEdge R710 on the power supply power

  Hallo!

  I have a PowerEdge R710 server and try to configure startup when the main switch in case 19 "is turned on. No chance, there is no option in the BIOS. It is possible at all?

  Will be grateful for your suggestions...

  WK77,

  In the BIOS to the title of the SECURITY of the SYSTEM, you have AC POWER RECOVERY. If you set that on IT and programming your waiting time if desired, and then the will to power server when it has power restored to it.

  I would like to know if that's what you were talking about.

• Memory support for the Poweredge R710 speed

  The Dell Poweredge R710 supports up to 1600 MHz memories? As [manufacturer: SNP20D6FC / 16G |] [Dell Part #: A6994465] is compatible with R710?

  Osmanhamid,

  Frequency of memory in servers are affected by a number of factors, including; Speed DIMMS and CPU and memory configuration.

  R710 server supports:

  1. Speed up to 1333 MHz for one module of memory through
  2. Speed up to 1066 MHz for both modules of memory through
  3. Speed up to 800 MHz for three modules of memory per channel. All these speeds correspond to memory single or double modules. Therefore, the speed of 1600 MHz will be down-clocked at a speed suitable depending on the configuration.

  Let me know if you have any other questions.

• PowerEdge R710, the problem with RAM

  Hello!

  On our server, 'PowerEdge R710' fails to increase the amount of RAM. On the motherboard there are 18 slots for RAM, 6 black and white 12. We bought 18 modules of memory 16 gigabytes of each. However, the memory ran in the white slots. In the description of the server on your company's Russian website indicates that the server supports up to 192 GB of RAM. The English language description of the server page says that he accepts 288 gigabytes of RAM. We are always able to put only 96 gigabytes, which we do not like it absolutely. Maybe we are doing something wrong. Tell me, how much RAM you can place on this server and how to do it correctly?

  Hello

  What you need to do, it's actually install memory in A1, A2, A3, A4, A5, A6 and B1, B2, B3, B4, B5, B6 - 6 free slots you but this should allow you to install 192 GB.

• Connect a Powervault MD1200 to a PowerEdge R710 5.1 running esx using SAS cables

  Hello

  I bought a Powervault md1200 and a perc h800 controller.

  I'll install the perc controller in my PowerEdge r710 5.1 running esx server.

  Then connect the md1200 to the r710 via sas cables. The powervault is no NIC.

  My question is, how to configure the RAID while booting the r710? I understand that if I were on Windows, I could use open manage but I'm not familiar with how to do this from a 5.1 esx server.

  I'd appreciate any help.

  Thank you

  Flynn

  Hello Flynn,

  What you need to do is to go into the Bios of your H800 controller and you can then configure your virtual disk MD1200.  Once you have the virtual disk created, then you will be able to do a scan in ESX & he should see the virtual disk that are created.  To access the boot controller bios you need to hit Ctrl + C to enter the bios.

  Please let us know if you have any other questions.

• Dell PowerEdge R710 - power Ricambio

  Buongiorno,
  Ho need di one ' offer by United Nations alimentatore per PowerEdge R710 con serial number FCL5WN1, dal supporto telephone Dell mi hanno detto di inoltrare the request that.
  Grazie. Saluti.
  Honeywell
  G.Casale

  buongionro, sto contattando via e-mail.

• Request alimentatore per PowerEdge R710 [CF]

  Buongiorno,

  avrei need di UN alimentatore per PowerEdge R710 take it cui service TAG e F4FRN4J, my dal supporto Dell mi hanno detto di write that. He codice che ho letto sull'alimentatore e n870p-s0, my come posso fare per sapere e thing i prices?

  In hoist foto dell'alimentatore.

  Buongiorno, the sto contattando by mail.

• [EC] PowerEdge R710 error: 5 E1810 HDD failure

  Buongiorno, di abbiamo UN UN PowerEdge R710 con TAG H1S5S4J che presenta error disco in oggetto. Chiedo UN preventivo como Logserv S.r.l. by the sostituzione nao.

  In attesa di a vostro riscontro, lascio Reed he mio personale interno. 0371-763973.

  Dear client,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi UN message privato.

  Nel caso in cui as aver need di assistenza telefonica is Pagaré a ticket di Assistenza.

  SE if need di una delle quotazione left in sostituzione can rates UN preventivo senza Pagaré the assistenza.

  By request, we have our o di need any it client codice di vecchia quotazione o.

  Nel caso in cui non his di queste information times need che compilasse i seguenti campi:

  -SERVICE TAG-

  By the spedizione:

  1. company name:

  2 address:

  3 City:

  4 Provincia:

  5 cap:

  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione (is different)

  1 nome società (is it client code):

  2 via:

  3 City:

  4 Provincia:

  Heading 5:

  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  7 partita IVA

  Speaking saluti

  EC

• Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

  Hi Sir,

  Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

  Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

  Please give me guide to solve this problem.

  I thank & regards

  Ramanantsoa D

  Thanks for the reply.

  My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

  Although I have not tried switching/EAP, I will try that and get back to you.

  And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

  Thank you.

• Offer by guasto componente PowerEdge R710 [MS]

  Buongiorno,

  Ho Server UN PowerEdge R710 (Service Tag = ) stamattina mi è questo allert love Dove,.

  Event: System Board PS redundancy: PS redundancy to system board sensor, redundancy lost said
  Date/time: Friday, April 15, 2016 01:31:08
  Severity: critical
  Model: PowerEdge R710
  Service etiquette: DQV705J
  BIOS version: 6.4.0

  MI sono is alla remote console e ho trovato a "Build redundancy power" error e lo del PS2 e status in error, come che if ditch rotto.

  A tal purpose I wanted to get one offer per questo componente rotto (senza intervento del tecnico, visto che lo sostituiremo noi).

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  -Service tag del Server

  By the spedizione (intervento o):

  1. company name:

  2 address:

  3 City:

  4 Provincia:

  5 cap:

  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione

  1 nome società (o codice client o number order recent):

  Address 2:

  3 City:

  4 Provincia:

  Heading 5:

  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  7 partita IVA:

  Speaking saluti

  Manual

• Adding disks RAID PowerEdge R710

  We have a PowerEdge R710 running a RAID1/RAID5 configuration.

  • PERC 6 / i SAS Raid Controller with 2 x 4 internal connectors.
  • RAID1 is composed of (2) 146GB 15K drives 2.5 "SAS.
  • RAID5 is composed of (3) 500GB 7.2 K Nearline 2.5 "SAS drives.
  • (3) empty bays are available.

  The server running VMware ESXi v5.0.0. We have almost maxed out storage so I need to add storage. I don't know what are the options I have to do this. These are the options that are possible, I hope.

  • Add 500 GB (3) discs the same as installed readers and expand the RAID5.
  • Add 500 GB (3) discs the same as installed readers and create a 2nd RAID5.
  • Add (3) 1 or 2 to 7.2 K near-Line SAS 2.5 "drives and create a 2nd RAID5.

  Can the PERC6 / i controller supports an another RAID5?

  bhartung

  • Add 500 GB (3) discs the same as installed readers and expand the RAID5.
  • Add 500 GB (3) discs the same as installed readers and create a 2nd RAID5.
  • Add (3) 1 or 2 to 7.2 K near-Line SAS 2.5 "drives and create a 2nd RAID5.

  These are possible.

• Change of DRAC 6 express to the DRAC III on a R710

  PowerEdge R710

  It currently has a

  Integrated Dell Remote Access Controller 6 - Express. Version 1.70

  We need to change to a

  DRAC III

  are there instructions, questions, or is it just a matter of setting power off take the Express outside, put the DRAC III in and prompted - on the contrary - at startup?

  Best regards Martin

  Martin,

  The DRAC III is not an option for support on the R710. The only one that will work in the R710 is the iDRAC6, Express versions, and the company.  There is no instructions available for this process.

  Kind regards

• Hard drive by PowerEdge R710 [MS]

  Good afternoon,

  It ns. Server DELL PowerEdge R710 (service tag ) ha UN disco che da problemi.

  The machine went up quattro "500 GB near line SAS 6 GB/s, 7.2 k 3.5"disco board hot-plug".»

  Ho tried a ' dare in the giro, my seems to che gli occhiata hard disk the da near Line SAS esistano più non 3.5 ".

  Could by help favore disco UN find by auswechseln quello che sta guastando if?

  Grazie thousand. Silvia (T.E.S.I. S.r.l.)

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  By the spedizione (intervento o):
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società (is it client code):
  Address 2:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual