4540 proBook s: HP ProBook s 4540, bootDevice found problem

Similar Questions

• ProBook 450 SSD of G1 problems

  Hi all that I just had a Probook G1 450, Walker has problems after replacing the HDD with a SSD.

  Windows installed just fine, but as soon as I installed some drivers, mostly related to the media storage to intel and ETC I get a BSOD with the stop 0x0000001E, and I can't solve it.

  Any help would be appreciated.

  Thanks in advance.

  Hi Mrstenter,

  In fact, the problem is caused by the HP 3D DriveGuard driver, if you skip the installation when you have an SSD installed, giving no problem. FYI the SSD, I used was a MX1000 Crucial 256 GB. And after I jumped this instalation driver laptop currently works perfectly.

  Thank you

• HP ProBook s 4540 - we found that all the disks during the installation of Windows 8

  I have some problems (re) - install Windows 8 on a ProBook s 4540.

  The laptop had a virus so I decided to reinstall Windows 8. I bootet with a Linux rescue CD and made a backup of my personal data. Then I erased the hard disk (using Gparted) (except the first two partitions (System and boot) and with the HP Windows 8 DVD rebootet.) I see always the reader and various partitions, but Windows won't let me install on any of them. So next time, I tried to create two partitions with Gparted directly, but now, I am not at all a player and get after the error message:

  We have found all the disks. For a storage driver, click on load a driver.

  I googled a bit and I tried to switch between IDE and AHCI in the BIOS, but that did not help. Then I copied most of the pilots of the Assistance Center on a Flash drive and walked to the proper drivers, but no luck. I also tried to look on the Application and Driver Recovery DVD provided with Windows 8 directly but no luck there as well.

  I'm a bit at my wits end now, any help would be really appreciated.

  Don't know if it's the Board correct, please move if not.

  I deleted the partition windows 300MiB and now I can see and select some readers in windows install again. The problem is that windows will not continue because of various errors. (See attachments)

  The problem seems to be that my disk is dynamic. I found a guide to convert the hard drive back to base. So my question is, this will help her or my HP DVD awaits the dynamic hard disk?

• HP Probook s 4540 DVD burn problem!

  My DVD drive does not burn DVD-R discs. It starts to burn, but after awhile, it is said that the burning process is not completed successfully. My laptop is HP Probook 4540 s and almost new. I bought it a few months ago. The DVD player plays DVD discs, but does not burn them. I read in the configuration information that the DVD drive supports the DVD-R and DVD + R. Please, can someone help me with this?

  It works with + R media. Thank you!

• HP probook 4540 s heating problem.

  I don't know that it may sound like a silly question. But what's really under the left hand side of the touch pad of my probook 4540 s. This area just instantly heats up during light as watch movies or navigation. I' vs. 2 GB Radeon graphic and when games are played it's warmer. I do not complain for the games. But why when I just surf the net? My BIOS is updated. I would really appreciate the help

  Hello, hüffer... last night I tried to remember whem all this global warming has started and I found after trying to establish a virtual wifi network through Microsoft virtual wifi miniport. Then I uninstalled and deleted and the problem is gone thank you

• BootDevice found Probook 6475 b

  I work in a corporate environment and may have a "stupid question".  Regretably I have to deploy Windows XP currently.  I was able to successfully repel the 6475b image by setting the machine to start in legacy mode, as the native operating system was Win8 Pro.

  Controls system and booting from a 3rd party utility tell me that is the disc and functionng.  However, I have the hard disk 3F0 error when I try to start.  Using Win7 or Win8 isn't a righ tnow option and the hardware seems solid.  My guess is I am missing something simple in the BIOS but am helpless as to what.  Thanks for your help!

  It turns out that the problem was the way the most recent hard drive was originally enclosed.  Windows XP is looking for blocks of 4 KB so that Vista and upward can handle blocks of 512 KB, which is the way Windows 8 drivers are partitioned.

  The resolution was to use diskpart to repartiion the drive and then deploy wim and ImageX, using a file for a gall by copy of file and a sector based in the format Altris RDeploy img file.

• HP probook 4530 s: wireless controller problems

  Hello community, I use a bit of hp probook 4530 s windows 7 ultimate 64 running with problems become my wireless to start.
  Here's my driver info and please help. Thanks in advance
  
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  Hello:

  You need this driver...

  This package contains the installation package driver for the controller LAN Realtek RTL8188CE wireless in the laptop models running a supported operating system.

  FTP://FTP.HP.com/pub/SoftPaq/sp57001-57500/sp57049 .exe

• HP probook with xp with brightness problems

  I have a hp probook running xp, when I plug my power in it gets dimmer and when I unplug it it becomes more clear. How can I change this so brighter when sound sound plugged in?

  Hi, NTC,.
  By default, the factory settings, it will save your backup battery
  for this problem to light,.

  Change your laptop power options:

  Go to start & select RUN & type control then enter Panel will open, select the option to change the settings of brightness for the power supply and the battery mode mode.
  Kind regards
  J Chambers

• HP ProBook 450 SSD cold start problem

  Hello. I recently bought new HP ProBook 450 H6P53EA with SSD (SanDisk SDSSSDHP128G) included.

  After the first commissioning of this message came:

  "Boot Device not found.

  "Please install an operating system on your hard drive."

  "Hard Disk (3F0).

   

  I just thought about it it might be true that the laptop came without OS (probably SUSE there, but I did not even notice) so I went just to install Windows 8.

  Everything works fine and I am very satisfied BUT

  my laptop is turned a few hours every time this message and the operating system cannot be started.

  After pressing enter short menu appears (with memory/disk check options I think) and I'm heading directly at the exit and when it starts up again everything seems to be ok.

  After reboot or a short period of time when the laptop is liquidated everything is always very well. So, it seems that the problem only occurs when the laptop is down for several hours. All possible solutions?

  Thank you.

  marek91

  First update the UEFI BIOS and Chipset drivers

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5379204&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4132%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  The BIOS fix

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5379204&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125073_1%257CswEnvOID%253D4132%257CitemLocale%253D%257CswLang%253D%257Cmode%253D5%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  New UEFI system

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5379204&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125304_1%257CswEnvOID%253D4132%257CitemLocale%253D%257CswLang%253D%257Cmode%253D5%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Intel Rapid Storage Technology driver

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5379204&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D4%257CswItem%253Dob_123861_1%257CswEnvOID%253D4132%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Check the latest SSD Firmware Toolkit

  http://KB.SanDisk.com/app/answers/detail/A_ID/9328

• ProBook 4510 s CPU Fan problem

  
  

  Hi guys,.

  I thought that it gave no global warming problems Probook. but maybe the vents free of dust, use compressed air. A software called "CPUIDLE" to control the global warming (attention to the configuration of the Pentecost) and must always use a cooling base of aluminum is the best.

  PD

  Download the cpuidle.de software and be very vigilant Pentecost options configuration.

• HP ProBook 6550 b: not found Drivers for Windows 10

  Hi all

  I have a 6550 ProBook HP running Windows 10, I was installing drivers and managed to install everything except 3 devices (device Base system device Base system and unknown device). I got up on the site of HP support and noticed that they only have drivers for Windows 7, so that of not going to work. I installed a program that told me the devices that need drivers were 2 x ACPI supported and an AHCI device supported. I tried the universal drivers for devices that I just mentioned and find one for the AHCI, but when I installed it, it told me that I already have a newer version of this driver on the laptop (but Device Manager showed me that I don't have the drivers for the device? Since its introduction the exclamation yellow mark and can not find the drivers). Thus, since the sounds than enough drivers important, I would like to help in the finder the correct drivers because they seem not found.

  In addition, there is no update available via Windows Update and HP Support Assistant is also coming up empty

  Thanks in advance!

  Greetings,

  ICTLeerbedrijf

  You are the very welcome.

  Based on the ID you posted, it is certainly the drivers you need.

  Here are the links to the support page...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4173846&swItemId=ob_79991_1&swEnvOid=4059

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_125640_1

• Said my probook: boot device not found please install operating

  My laptop says: not found boot device
  Please install an operating system on your hard drive
  Hard drive (3FO)
  F2 System Diagnostics
  For more information, please visit: www.hp.com/go/techcenter/startup

  -------------

  I used colonettes-Test HARD drive Options, he says "hard drive spent '. But I try to turn on laptop but fair: not found boot device.

  ---

  HARD drive died?

  --

  Please help me, thank you very much!

  Sory my bad English.

  Hello hungvocam

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forumsfor a better answer.

  Thank you and have a great day!

  Mario

• HP probook 450 g2: hp probook 450 g2 bios update problems

  Hello

  I have problems with the update to the BIOS: I got the BIOS version 01.12 and in HPSA there is the option to update the bios. in fact I had problems with the video card since the beginning of October more or less. the problem is that when I click on the application update download version but the installation in the pc action never ends. After a long period HPSA stops working and I cannot update to version 01.15ap1. could you please tell me what can and what should I do?

  Thank you, Simone

  mastrosa

  restart the system

  It's corrupted recovery, HPSA the BIOS bios by pressing the keys Windows and B

  Disable Internet Security

  Install the new Bios download with out the HPSA

• more old hp probook 6560 b: not found boot device.

  I had planned to donate old cell phone. I made a secure erase. Since then, I can't phone to start towards the top/boot. Just on the black page no boot device install the operating system on your hard drive. (3forget)
  I thought that to see an error that says media test failure too.
  There is no option to click on preform a hard
  Reset.
  I have reset everything to default settings.
  I ran the tests happened.
  I reinstalled the hard drive.
  There is no option to click on system restore.
  any advice?

  Hello

  So it's my opinion that you have wiped the system, or at least access to the system and probably deleted all data of the partition and its content.

  So it is cleared safely but there its usefulness to a novice is now questionable.

  So if you are donating to an organization I expect they could install a new OS etc and everything will be fine.

  If in doubt please ask.

• Claim "suggestion" to replace the ProBook 6540 b

  Hi, I'm in a sea of confusion and perplexity bought by my insurance company

  I recently had an accident with my laptop and having been informed my probook 6540 is irreplaceable - no problem, just replace it?  Is no longer available - but we will give you a Pavillion... .eeerrr not.

  So some suggestions later, we are now at a ProBook s 4540 (at least it's a Pro book) but HP say that the 6570b is a direct replacement for my old 6540 - insurance company gave me to know if I can give good reasons why... I'm stuck with the 4540 s.

  I have now tried to compare the specs - with no idea frankly I want to- and if I come to you for help!

  I myself fought after the first offer, but must say that the "as long as the specification is the same, we do not as for as" I tried to explain that while both cars have an engine and about the same function - you wouldn't accept a Skoda on a Bentley... * sigh *.

  If someone could help - I'd really like to make what I'm slowly losing the will to live

  It is certainly not fair

  I'm off to do some serious scanning-wish me good luck!

  Thank you Paul!