ProBook 4510 s CPU Fan problem


Hi guys,.

I thought that it gave no global warming problems Probook. but maybe the vents free of dust, use compressed air. A software called "CPUIDLE" to control the global warming (attention to the configuration of the Pentecost) and must always use a cooling base of aluminum is the best.

PD

Download the cpuidle.de software and be very vigilant Pentecost options configuration.

Tags: Notebooks

Similar Questions

  • (Redirected) Aurora R4 CPU Fan problem (command center)?

    My R4 for over a year (so the warranty is released). Just before warranty missed, fans began to everything going haywire. I contacted support and they have updated my BIOS and uninstalled/re-installed my remote control center. Which fixed most of the fans. Then I updated to windows 10, and everything was still fine. A month later, I had a system crash (wouldn't start upward) and took the PC to a local technician who found little bad ram was the only problem. Unfortunately, he drove my drivers back to before the bios and the command center have been updated (I don't know why). So, fans again started going crazy. I've updated the BIOS myself and that fixed some of the fans, however, the CPU fan is always crazy. If I run a program more complex than playing a video file, the CPU/system fan goes up to maximum speed (> 5000 RPM). In the control of the temperature, all times are stable around 27 to 28, so I don't know why the fan is too reactive. Also, I don't know why it lists the 0 system fan and the cpu fan at high speed, I've mentioned. Looking inside the machine, I can see that each fan is on, so no fan should be set to 0.

    I've heard talk of uninstall command center and reinstalling it would help, but I was not able to repeat myself that I can't find the dell control center download more. In the page drivers Aurora R4, it isn't appearing any more for download and I don't want to delete it until I have a way to download again. My command center is listed as 3.6.5.0. I have no way of knowing if this is the last version, I can't find any control center files or current information on alienware.com or dell.com anywhere. I doubt replacing the command center will solve the problem, but it is frustrating that I can't even try. Heck, even the link to the support site for "Alienware drivers and applications" leads to a dead link now (a page that won't load). If this expensive platform becomes a brick after all just a year, I don't see myself ever buy (or sell) products dell again.

    My system is an Aurora R4 with Intel (r) Core i7 - 4820 K Pro. Running on windows 10.

    Better in this position in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • CPU FAN problem

    My cpu fan is making noise and its not working only not my laptop model is 1106ax DV5.

    Wat could be the price for the fan and were I can get it.

    There are 4 different fans for this model, call HP parts and give them the serial number so they can sell you the right part.

    http://PartSurfer.HP.com/contactus.aspx

    .

  • iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

    Hello!

    My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

    Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

    What could be?

    Please help me!

    4ntoine

    Here is my model of iMac:

    iMac 27 "mid-2011 model 12.2

    Intel Core i7 3.4 GHz

    AMD Radeon HD 6970M 1024 MB

    OS X El Capitan 10.11.6
    SMC 1.72f2

    Boot ROM IM121.0047.B23

    reset the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

  • HP ProBook 4510 s power problem

    I have a ProBook 4510 of s. This morning he was in battery operation. Battery charge with the AC adapter is plugged in. Only a battery with flashing red x icon. Once the battery is depleted it would boot is no longer. I took out the battery and held the power for 30 seconds and plugged only adapter button in. The computer still does not start. Any suggestion would be appreciated. Thank you!

    Note: When the adapter connects to the laptop there is a little light above him. With the battery connected that little light flashes orange 7 times after pressing the power button. With the battery no light at all. NA not knowing if this information was relevant. I just wanted to add.

    Sounds like the battery has just stopped charging and the laptop powered by the adapter or because the charging circuit on the motherboard or the power adapter is bad. The first thing is to test the adapter using a multimeter or try another known good. Post back if you need help with this.

  • HP Probook 4510 upgrade processor Intel

    Hello!

    HP ProBook 4510 s + Core 2 Quad Mobile Q9000 is possible?  or maximum Intel Core 2 Duo T9600?

    HP Probook 4510 s black screen! reload continuously! BIOS problem?

    that the maximum possible CPU taken in charge on this laptop?

    http://Ark.Intel.com/ru/products/40480/Intel-Core2-Q...-GHz-1066-MHz-FSB
    http://Ark.Intel.com/ru/products/35135/Intel-82pm45-...ry-Controller-Hub

    C2D T9600 100% working!

  • ProBook 4510 s overheating

    My ProBook 4510 s laptop is overheating. 2 days, it goes. I think that my cooling fan does not work

    (she turns not noise). And later, after 30-40 minutes it stops due to overheating. I clean my fan with my vacuum cleaning machine. Any advice what should I do? I have no confidence on technicians and I prefer to fix the problem. Help, please.

    Dear customer,

    Welcome and thanks for posting your query on the Forum from the HP Support

    It seems that your laptop because of overheating because of which the laptop starts to turn itself OFF

    We will surely help you with this problem

    Please perform the steps to solve the problem below:

    1. you need to clean all vents and openings that are really good with a can of compressed air

    2. check if the fan is running when the power adapter is connected

    3 boot into BIOS > System Configuration > Device Configuration > enable ' Fan always WE.

    Note: Incase even after these steps, if the same problem persists replace the fan

    You can also check your warranty here to check the status of the guarantee

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    I work on behalf of HP

  • Meaning code LED: 13 times (HP ProBook 4510 s)

    Laptop: Hp ProBook 4510 s

    When I turn on my laptop, blue light on power button comes on for 6 seconds, until the led near the power plug right side quickly flashes 13 times. Always exactly 13 times, so it must be some kind of error code. Then laptop stops. Nothing is heard, no fan, no hard drive.

    What's wrong? I'm really in a bad situation, I have no money and I need this computer. Feel really bad. Thanks for all the help!

    Hello

    I registered just for this post in case it helps someone.

    I opened my 4510 s to clean the dust in the heat sink because it was overheating (it has other problems as well, for example sometimes when it turns on, the LCD backlight turns on just for a second, then again) and after her he recovered, he began to do exactly what you call in your message. I found it weird because at halfway through the Assembly I turned it on just in case, and it worked fine.

    So what I did was loosen all the screws on the metal cover (the one under the keyboard) and then started squeezing one and turning it on every time up until I have found the problem. The culprit was a screw near the radiator fan. When I shake, it starts the thing flashing led and does light, once I have loosen a bit it starts working again. I guess it based on a place which results in a short circuit or something.

    Here is a picture with the screw that I'm talking about:

  • Satellite P200 - need CPU fan replacement

    I have a Satellite P200-16V and my problem is on the cpu fan.

    I tried to open it, but after the keyboard, hard drive, Rams, OVOCHECK and 40-50 screws and some cables, I realized I have to get out the motherboard and screen mabe and I close it again after 3-4 hours. The cpu fan has been breaking and I don't know what to do.

    I am from Greece. If I go to the toshiba in Greece, I can find a cpu fan or any system cpu radiator? Can you help me?

    Hey Buddy,

    Looks like the fan needs to be replaced and therefore, you should contact the closest service provider authorized in your country. Guys can order a replacement part and swap it out.

    On the Toshiba site, you can find a list of them:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Sorry, but everything that s what I can say. Here it s only a user forum so I think no one knows the exact number of part or a manual how to take apart the laptop but the ASP can do for you. :)

  • Satellite X 200 - is the contribution of the CPU fan covered?

    Hello

    I have a fairly new laptop Satellite X 200 casual CPU overheating problems. I noticed that the fan (CPU?) left at the bottom of the laptop is completely covered inside by a thin sheet of plastic. The contribution of right (GPU?) fan is open and the fan is visible. Now, I don't pretend to know anything on the design of ventilation for laptop, so maybe this is a stupid question, but why the contribution is covered?

    As far as I can tell from google pictures of identical systems otherwise, the fan seems to be visible (ie., no plastic coating). It is difficult to see how the coating don't would not significantly reduce the air flow and indeed when felt hand there seems to be no air flow at all. On the other hand, to the right entrance of GPU, a powerful air flow can be felt constantly.

    So I would like to know if the other X 200 users also have this coating of plastic, and if so, if anyone knows what is the function and if there is a reason to not be deleted? Thanks in advance.

    Hello

    > noticed that the contribution of fan (CPU?) left at the bottom of the laptop is completely covered inside by a thin sheet of plastic. The contribution of right (GPU?) fan is open and the fan is visible

    It's normal. I presume that the vents are covered because the module of cooling on the left doesn't suck the air out, but it turns off.

    Don t worry buddy there is nothing wrong with your X 200 or with integrated ;) cooling modules

    Concerning

  • Tecra S11 - CPU fan is high speed

    Hello

    We have a problem with nine Tecra S11 / Windows 7 64-bit. The CPU fan is noisy high speed during ignition and start Windows. No change after logon. Speed remains unchanged up to go to the sleep mode once. After waking up, everything is OK.

    For me, it seems to be a problem with the firmware (BIOS). Update V1.70 but no change. We have same problem with the S11.

    Any ideas?

    Cordially Stevep

    Hi Stevep_1,

    Have you tested different cooling options in Windows power management? Check it for each profile, and then select battery optimized cooling.

    It work?

  • My cpu fan runs very fast

    My laptop is HP 430.I bought a month ago. but now m facing a problem that my left side of laptop heat & the cpu fan turns very quickly, and issued to hot air. Although I don't run any proggram when I start my windows.i checked for Task Manager and saw that my ram is support 1.44 - 1, 62 moy. now what can I do now?

    Theedude Hello.  I understand that your laptop runs very hot.



    First, follow the steps in this document to ensure that the cooling area is free from dust and debris.



    I suggest also that update you your BIOS.  Here is a link to the latest BIOS.



    Let me know the result.  Have a wonderful day.

  • Satellite A300 - 1-3 - question on CPU Fan

    I have a Toshiba Satellite A300 - 1 3, recently I had problems with my laptop in which the laptop suddenly stops working, when I checked the forum, I was advised to clean the cooling system, which I did and all is now ok; recently, I noticed that CPU fan stops momentarily, then back to work, is this correct?

    If this is not the case, what should I do, should I replace the CPU fan? Or what?

    As far as I know CPU fun is running automatically and it will run when this is necessary so that the fan behavior is nothing unusual.

    If your laptop works well and, after cleaning, you didn t notice any more close I think that everything is OK.

  • Satellite A300-1DB CPU Fan is boring, too strong

    Hi all

    I bought a Toshiba Satellite A300-1DB today in a German (580 euros) and I really like the design of laptops and performance, but there is a big problem I can not bear more (and I used it only for 2 hours).

    The CPU fan on the left side of the laptop is annoyning Yes: even if I keep the laptop idle (CPU activity is very low, just under 10% and 1 GB of ram used), the CPU fan is really really strong spinning for a minute.

    After that there is silence, a great silence... for 2 minutes. And then the whole process starts over and over again. Just cold air comes out.

    It's make me crazy, that the CPU in the idle mode fan is stronger than my other Satellite A210 - 106 Turion X 2-52 L with full activity of the CPU. I wish to have a CPU fan that keeps spinning in a low sound.

    Do you have ideas about how to control the fan?
    Otherwise I try to replace it with another laptop (I hope they allow that, unfortunately, it is not an Internet shop where you can send it back up to 14 days)

    Kind regards
    Dieter

    I managed it successfully using balanced power management and using battery optimized for cooling method option. This setting you will find, under advanced power settings > Toshiba Power Saver utility.

  • Satellite A10 S203: the CPU fan does not work properly?

    I have toshiba satellite a10 s203 and the cpu fan does not work correctly. What can I do about it?

    Hi SACRIFICE them.

    Here are some possible solutions to this problem of fan.

    1. When you have installed a base installation of MS (not the Toshiba Recovery CD) you need to install the Toshiba Power Saver and others utilities from the CD tools & utilities. The energy saver is responsible for the control of the fan.

    2. If you have a recovery based OS, you can update the energy saver of http://eu.computers.toshiba-europe.com site Web Toshiba under Support & Downloads - Download Driver

    If please check this and an answer then follow the next step!

    CAMPino

Maybe you are looking for

  • I didn't care that "connection is not sure" I want to go on the Web site

    Firefox won't let me go to a website because "the connection is not safe." I don't like that it's not safe, I need to download something there and Firefox, IE, and Opera is the only supported browsers. I tried IE and won't go out of my way to downloa

  • Is there a driver for El Capitan ATTO scsi?

    I just upgraded to El Capitan.  Now my old scsi card is not seen by my Mac Pro G5.  I installed the driver of ATTO, but it is NG.

  • Transfer of slate photos 'Gallery' for laptop.

    Hello I want to be able to back up my tab 7 HD photos on my laptop. If I connect the devices, the laptop sees the slate internal memory card but I think the photo gallery is on the internal memory. How can I access it to make a backup? Thank you Grah

  • Digital list for Boolean table

    Hello I have two list boxes. One of them has different voltages and the other has tensions of difference. For every interaction, a freq and tension must be selected and the corresponding Boolean table elements must be high. Voltage FREQ 100          

  • WinHelp32.exe windows 2008 sp2

    I finished the steps of al in the Q-article KB917607.  I installed the patch and has added two reg hacks: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WinHelp] "For AllowProgrammaticMacros" = DWORD: 00000001"AllowIntran