46TL963G - DVB-S reception problem some programs

Similar Questions

• Problem connecting to some programs on HBO NOW

  I have an Apple TV 2-3 rd gen. I had a few minor problems in recent years but have recently subscribed to HBO NOW and the unit will broadcast some programs very well but does not connect to other programs. Get an icon of spinning as it try to connect and notice light on Apple TV out and blink several times and turn back on. What happens here? Could it be warm-up he close cause or is more Apple TV compatible or reliable with a new Airport Extream router?

  It has nothing to do with the extreme router and if it is only with HBO now content so I suspect that the problem is with HBO, have you tried to contact them.

• Impression of problem if I try to print from some programs

  Vista will not display in some programs? I can print from a program and if I go to the other that it will not print, it happens on both programs. I can print all other programs at any time unless you print from these two programs first? If I print from all other programs first, it will not be printed from the other two? Strange!

  Vista will not display in some programs? I can print from a program and if I go to the other that it will not print, it happens on both programs. I can print all other programs at any time unless you print from these two programs first? If I print from all other programs first, it will not be printed from the other two? Strange!

  Printer problems in windows
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1: Check hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  http://support.Microsoft.com/ph/11732#TAB0

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows 7 32-bit slow start of blue circle hangs on the network icon in the tray for 10 minutes, some programs don't load until the problem resolves.

  Hello world.

  It will be long and windy.

  I have a problem with my Dell XPS M1530.

  im going to write down the details of my question, short first. so if you want you can read my short story on my laptop and I.

  • Slow start.
  • Network at startup initialization problem.
  • Blue circle weighs on my network icon in the taskbar notification for 10 minutes or more. then she disappears with the problem that everything starts to operate correctly.
  • some startup programs do not start until the issue is resolved. (blue circle disappears) i.e. Dell touchpad, magic disc, pda.net and perhaps language bar.
  • programs that have to do with the network or the internet such as IE or center network to hang until the issue is resolved.
  • Some programs won't load if started up that the problem is solved. i.e. open office, cakewalk sonar.

  Another thing, I noticed. If I have automatic network connection configuration and the network is in range when I launch firefox I can actually serf the web regardless of the question.

  I'm not the only one having this problem, but solutions that work for some do not work for me. some of the things I've tried to understand.

  • has run msconfig to see if it is one of the start up programs or cervix causing the problem. found nothing.
  • has ran the command cmd, I forgot what's it called some thing/something else. It digitizes and restores the registers according to me. did not help
  • Used pc AVG scanner. then corrected all the errors found and the questions. did not help.
  • reinstalled the network drivers. did not help.
  • Ran startup recovery tool to fix problems at the beginning. did not help.
  • Booted up my laptop in SafeMode with network. Works very well

  Also, the problem started not with win 7 install I had it on my laptop well before the Enigma.

  im running Windows 7 Professional 32-bit. as if lately, about 3 months ago, my laptop started to start slowly and be laggy when the system boots. I have no much attention at first. Since the question does not disappear on its own, I noticed that my network in the notification bar icon has a blue circle probably because its network initialization or loading something that is bound to it something as is. After about 10 minutes the issue resolves itself and everything works fine until I have reboot or restart. also if I put my laptop to sleep when I start it it works fine. I think that the time to resolve that issue got longer it is about 10 min now but it used a lot less. at least that's what I recall. In addition, I noticed a few more things. If I left click on the network icon does nothing when normally it will display network connections. If I right click on it displays troubleshooting and Open Network and Sharing Center. Troubleshooting doesn't help and returns nothing. Network and sharing Center is suspended until the problem resolves. in fact, some programs won't load until it the problem goes away like internet explore, network and sharing virtually Center almost everything what has to do with the network and also other programs that require a little more resources e.g. cakewalk Sonar. In addition, other startup programs and services such as Dell touch pad, magic disk, PDA. NEt don't start until after the problem goes away. What else... the kicker is that while the issue is to present the networks I connect to automatically are in fact very well and I have internet, even though the network is still initializing. what I mean is that if I start my portable firefox and launch (cannot use IE because he hangs up) I can go online and the serf of the web.

  Well, I am at a loss and don't know what to do next, except to format and clean install. However, people who did it until the problem was which leads me to believe that this is one of the windows updates may be.

  If someone knows how to fix this problem or can give a kind of constructive contribution, I'm all ears.

  Thanks in advance.

  Hey Kosmosis,

  I had the same problem, and after fishing trawl through the web to find answers, this is the most reliable solution that I found. At the very least, it will help to determine where the problem is.

  (1) reboot your computer.

  (2) go to Run--> services.msc

  (3) to sort the list by status (click the heading)

  (4) see those blocked at the 'boot '? These are your incriminated objects.

  Apparently, Windows has problems initializing services, and until he solves, or give up, he can't go the rest of the startup procedure. Different people get stuck on different things. For me, it was the 'Server' service as jams it for 20 minutes or more.

  You have 2 options:

  Right click 1)--> properties and change the Startup Type to "automatic (Delayed). This requires to load later, that hopefully allows all the rest at the end of initialization so that you can use the computer first.

  (2) read the Description of the service and see if you can find whats causing it to get stuck. In my case, 'Server' rule of network discovery, file sharing and printing. I realized that I UNPLUGGED a NAS from Buffalo, who worked as a print server as well. My windows was blocked to find a printer on a network that was no longer available. Remove the printer from devices solved the problem.

  If all else fails, you can always try to disable the service. This is probably not the best reccomendation, like its there for a reason, but it might help you to troubleshoot.

• Windows 7 64-bit slow start of blue circle hangs on the network icon in the notification area. Some programs don't load until the problem resolves. stuck at the screen of welcome for 5-10 minutes sometimes.

  Hello world.

  It will be long and windy.

  I have a problem with my ASUS G50VT - X 5.

  im going to write down the details of my question, short first. so if you want you can read my short story on my laptop and I.

  • Slow start.
  • Network at startup initialization problem.
  • Blue circle weighs on my network icon in the taskbar notification for 10 minutes or more. then she disappears with the problem that everything starts to operate correctly.
  • some startup programs do not start until the issue is resolved. (blue circle disappears) i.e. adjustment of splendid colors, services, programs of control really like network connections and things like that but some i can still run.
  • programs that have to do with the network or the internet such as IE or center network to hang until the issue is resolved.
  • Some programs won't load if started up that the problem is solved. for example, microsoft outlook and other things.

  Another thing, I noticed. If I have automatic network connection configuration and the network is in range when I launch firefox I can actually serf the web regardless of the question.

  I'm not the only one having this problem, but solutions that work for some do not work for me. some of the things I've tried to understand.

  • has run msconfig to see if it is one of the start up programs or services is causing the problem. found nothing.
  • run the cmd command, I think that the chkdsk. It digitizes and restores the registers according to me. did not help
  • Used norton. then corrected all the errors found and the questions. did not help.
  • Ran startup recovery tool to fix problems at the beginning. did not help.
  • Booted up my laptop in SafeMode with network. Works very well

  Also, the problem started not with win 7 install I had it on my laptop well before the problem.

  im running Windows 7 Professional 64-bit. as if lately, about a week ago my laptop started to start, slow down and be laggy when the system boots. I have no much attention at first. Since the question does not disappear on its own, I noticed that my network in the notification bar icon has a blue circle probably because its network initialization or loading something that is bound to it something as is. After about 10 minutes the issue resolves itself and everything works fine until I have reboot or restart. also sometimes on occasion I will be stuck to the homescreen for 7-10 minutes.  also if I put my laptop to sleep when I start it it works fine. I think that the time to resolve that issue got longer it is about 10 min now but it used a lot less. at least that's what I recall. In addition, I noticed a few more things. If I left click on the network icon does nothing when normally it will display network connections. If I right click on it displays troubleshooting and Open Network and Sharing Center. Troubleshooting doesn't help and returns nothing. Network and sharing Center is suspended until the problem resolves. in fact, some programs won't load until it the problem goes away as internet explore, network and sharing virtually Center almost everything what has to do with the network and also other programs that require a bit more resources. What else... the kicker is that while the issue is to present the networks I connect to automatically are in fact very well and I have internet, even though the network is still initializing. what I mean is that if I start my portable firefox and launch (cannot use IE because he hangs up) I can go online and the serf of the web.

  Well, I am at a loss and don't know what to do next, except to format and clean install. However, people who did it until the problem was which leads me to believe that this is one of the windows updates may be.

  If someone knows how to fix this problem or can give a kind of constructive contribution, I'm all ears.

  Thanks in advance.

  I also looked in the event viewer and noticed these problems...
  The winlogon notification subscriber took 916 second (s) to handle the notification event (Logon).
  -

  -

  6006

  0

  3

  0

  0

  0 x 80000000000000

  56201

  Application

  Collin-PC

  -

  TermSrv

  916

  Opening of session

  02000000

  and it was lower than...
  Bucket of error, type 0

  Name of the event: ServiceHang

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: LanmanServer

  P2: srvsvc.dll

  P3: 6.1.7601.17514

  P4: 20

  P5: 2

  P6:

  P7:

  P8:

  P9:

  P10:

  Attached files:

  C:\Windows\Temp\WERBC1D.tmp.WERInternalMetadata.XML

  C:\Windows\Temp\WERBC1E.tmp.HDMP

  C:\Windows\Temp\WERCBA9.tmp.mdmp

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppHang_LanmanServer_958bb07ee47f1d58779ce0fb489791f2b7187bdb_cab_0de8cef2

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 0de8cd67-d5a8-11e0-a8a7-9ab1f0009500

  Display state: 6

  and below that,.,.

  The winlogon notification subscriber takes a long time to handle the notification event (Logon).

  Hello

  1. Since when are you facing this problem?

  2 have you made changes on the computer before this problem?

  3. do you get any error code or error message while starting?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  If you have not tried the steps in the following Microsoft article, then try to clean boot and check if it helps.

  How to solve the problem by running the clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Step 1:

  If the problem persists, you can create a new user account and check what is happening. To create a new user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope the information is useful.

• Satellite Pro M10 freeze and crash with some programs

  Hello

  I have a M10 Pro Satellite...
  A few weeks ago it's freeze and crash with some programs like wmpayer, messenger... I delivered to the authorized agent and they had not detected any problems.
  Already I have formatted several times, but the problem persists.

  Any idea what this may be?

  Thank you

  Hello

  For me it looks like you might have a motherboard problem. Formatting removes the chance that it is a software problem. Try taking 1 stick of RAM and test with it. If she continues to crash, remove that stick and try it. If she does it with the two RAM then those who are ok. HARD drive is not the culprit, so now he could either be processor or MB. Find a program to measure the heat from the laptop and run some heavy programs do overheat. If the temperature goes up and then it crashes, it could just be overheating. If it continues without overheating you either have a CPU or MB problem. I hope this helps.

• Qosmio X 505-Q892 - some programs cannot access the Internet

  As the title says I have a Qosmio X 505 - Q892.

  The confusion is I can log on Mozilla Firefox/IE and even play MMO RPG very well as well as newspapers in Ventrilo and Skype but when I go to use any other program such as Windows Live Messenger, or to download and install of new programs/updates such as the NET. Framework v4.0 or even an older version of Windows Live Messenger or attempt to use hyperlinks in an installed version of Microsoft Excel 2010, I get an error message saying that I am not connected to the Internet when I'm clearly.

  Are passed by CMD and type in ipconfig/release expected 60 seconds and type ipconfig / renew and tried installation/connection to top programs and receive the same error message. Everything else works fine, otherwise I wouldn't be able to type on this issue. Now, I honestly don't know where to start to look for any information or if it just a coincidence that 3 or 4 different programs keep telling me I'm not connected to the internet when I am clearly, then by the process of elimination or whatever it is you want to call it, I decided it would be my best bet on a place to find some kind of help on this.

  In the case where there is no other curiosities that I know he has no impact on what will be and won't be not and technical troubleshooting changes, so I have a Windows 7 Home Premium 64 - bit SP1, the connection that I use is strong enough to bear 5 laptops, an Xbox 360 and PS3 at the same time, but also don't ever have connection problems unless there is a storm.

  Any help on this would be greatly appreciated as this is apparently beyond what I can fix on my own.

  Hi Dvx,

  To be honest it's a very strange problem, and especially on this virtual path (forum) it's not easy to say what to do in this case. I put t understand why you can access the Internet with programs such as Firefox and other programs not

  Only thing I could imagine, is that your firewall is blocking certain programs. This would explain why some programs work and other programs not. So please check your firewall / security software configuration so all programs have access to Internet.

  Otherwise, it would be interesting to know whether or not you use the preinstalled operating system from Toshiba and since when did you notice the problem.

• I can't open some programs and also what indicating computer it is said GfxUI has stopped working. do what Mathilde?

  I can't open some programs and also when the computer start he says that gfxui has stopped working. What I have to do work?

  Hi, Rosemary,

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  Without knowing your OS or the exact error message and everything Word to Word or the manufacturer, brand and model of your computer (especially the chipset), it is very difficult to provide you with clear instructions or recommendations; However, here is a link to another thread where someone had the same problem and there are two solutions (both different and both worth a try - if the first doesn't work, try the second): http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/gfxui-has-stopped-working/e7f88c22-7c58-4fc2-9ae9-667556d0c4fc.

  If this does not help, check out some of the alternative links on this problem in the following search: http://www.bing.com/search?q=gfxui%20has%20stopped%20working&PQ=gfxUI&SP=2&QS=AS&SK=AS1&sc=8-5&form=BB07SS&pc=BB07.  If you want, you can refine the search to include more information, such as your operating system or suite of the message and the results could be more useful.

  I hope this helps.  If this isn't the case, post back with the above-mentioned information that would help as well as what you have tried and what happened when you did.

  Good luck!

• I have no sound on my PC. Recently, I removed some programs, Soundmax. I tried to re - install all the programs 'restoration systems.

  I have no sound on my PC. Recently, I removed some programs, which is Soundmax. I think it is the reason for my problem. I tried to re - install all the programs 'restoration systems. Without success. .. .telling me it can't restore to restore the date that I choose. Help?

  original title: no sound

  Try to reinstall the driver from the manufacturers website. If this does not work, go through the steps detailed here: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

• I did recently have a spybot search and destroy and now I get this message that Rundll 32 exe if this file is not in this file I can't open some programs like control panel

  Original title: cannot find rundll 32 exe System I get this message when trying to open Control Panel please help

  I did recently have a spybot search and destroy and now I get this message that Rundll 32 exe if this file is not in this file I can't open some programs like control panel

  Hi ElaineHinder,

  You can follow the below mentioned article Microsoft Knowledge Base and check if the problem persists.

  Cannot find the Rundll32.exe file when you open Control Panel

  http://support.Microsoft.com/kb/812340

  Let us know if that helps.

• sound only works on some programs

  sound only works on some programs able to get on wmv, audio mp3, all sound tests but still unable to hear any sound on all links. The problem started when the sound volume icon disappeared from the taskbar, also the expander to the taskbar control disappeared at the same time. Place the volume in the taskbar icon is enabled, the icon is still missing from the taskbar. In Manager devices under IDE ATA/ATAPI controllers, that I had 2 primary and 2 secondary channels, try updating the drivers 1 primary and 1 secondary driver do not have be updated because they were later. Other primary and secondary drivers have been updated and listed as primary channel VIA ATE & secondary channel VIA ATE. Both these have an error this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Tried to uninstall & reinstall nothing doesn't. Can anyone help thank you FOR

  Well, punctuation, capitalization, and enablers would help make your readable phost!

  Do you mean that you have no web sounds? If so, make sure "Play web pages" or similar is verified in any browser you use.
  What did you win by dating the ATA drivers?
  You must identify your audio driver and the update.
  Go to the website of your computer manufacturer and obtain the correct drivers from there. If you PC, then go to the MB manufacturers website and get the drivers from there.
  Code 31: you managed to corrupt your audio drivers. Do as above.
  See you soon,.
  Jerry

• Error in the painting: "there is not enough memory or resources to complete the operation. Close some programs, and then try again. »

  Original title: new resource error in painting, whenever I try to close the file or select all content

  (Using XP with SP3) Use this machine for months and months and I use paint all the time to capture screens and paste a part in the documents. Don't know what I did but all of a sudden this error when I try to select - all or to close the window in paint:

  "There is not enough memory or resources to complete the operation. Close some programs, and then try again. »

  Even clicking end task in the Manager of tasks gets this message before TM requires the application to stop. Back to zero does not solve the problem, and other programs (memory hog) encounter any problems at all. Virus protection is up-to-date, ran a few cleanups, no help. I think that somewhere, paint is watered - I can download and reinstall?

  Hi ebjeebee,
   
  This problem can occur for the following reasons:

  • If the bitmap file is a compressed format that Paint cannot read. For example, paint does not support CVID compressed bitmap files. If you try to open such a file in Paint, the above error message occurs.
  • If the default image for the paint attributes are too large. This setting depends on the memory and disk space.
  To resolve this issue, use the appropriate method:
  • If you receive the error message above when opening a bitmap in Microsoft Paint, the only resolution at this time is to open the bitmap file in another program.
  • If you receive the error message above when opening Microsoft Paint, follow these steps to fix it:

  a. open an existing bitmap.

  b. in the Image menu, click attributes.

  c. click on default and then click OK.

  d. on the file menu, click Save as and save the bitmap with a new name.

  e. close and restart Paint.

• After the update of Windows XP, some programs from the taskbar are missing

  Hi.I got an update that microsoft advised. I installed it I restarted my computer and when I oppened it some programs were missing in the bar to the left of the clock, and the taskbar was loading, but programs were not loading. I rolledback system guard installation on my pc, but this update and if I turn off my pc it will install it and I'm having the same problem. What can I do?

  Have you read "'more information about this security update and known issues"in the KB , I've referenced? "

  and

  " How to get help and support for this update"

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Open empty windows for some programs

  Hi, while trying to open some programs, such as Trend Micro Internet Security and game, the program opens, but what I see is an empty window white. I let the computer sit where it is slow to load, I updated Adobe Flash, Java and also hardware drivers updated, but with the same results. Can someone help me with the Please?

  Australian salvation,

  1. you receive an error message?

  2 when was the last time it was working fine?

  3. did you of recent changes on the computer?

  I suggest that you check to see if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  If the problem does not persist in safe mode then I suggest that you perform the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error - can open the file install.log, unable to remove some programs.

  Original title: can not open install.log file.

  I am trying to clean my computer, because it is really slow. I tried to remove some programs and I keep getting this message, "could not open install.log file". Is anyway to fix this?

  Hi njfay,

  The programs that you are trying to uninstall?

  You can run the disk cleanup tool and check if the problem persists.

  Description of the tool in Windows XP disk cleanup

  Reference: optimize the performance of your computer

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.