5.1 ESXi does not recognize a RAID partition

Similar Questions

• VMware ESXi does not support the RAID on HP Proliant ML110 G5 drives

  Hello

  I installed VMware ESXi on my HP Proliant ML110 G5. I got 3 hard drives on my server at the moment, one of them is VMware ESXi and other two are RAID1.
  Whenever I connect to my server via vSphere client I have the chance to see every HARD drive (datastore) separately.  Is it possible that VMware does not RAID installation?
  I would need to see these two hard drives as a data store. Do you have any ideas on how I can do?
  Thank you.

  like any other typical server, you need to configure the sata raid controller RAID5/RAID0. but keep in mind that this controller without any battery backed cache would have very horrible performance. Another way is that you can use datastore span to provide as a large store of data, but if you lose all of the computer, you will lose all data.

• ESXi does not recognize the cd/dvd on HP DL380

  I'm new to the hypervisor and really need some advice on a DL 380 I put up as a box QA. After installing ESXi 3.5, I created the virtual machine I need and proceeds to start a virtual machine, but was surprised to see that the server does not see the CD drive? I guess that would not as surprising, if it's a customized version white box, but a HP DL380, only one of the most common servers in the world?

  Anyone has any advice or suggestions about what is a hotfix for this.

  Thank you

  Robert

  In addition, once you can convert many of your applications and or OS installs in ISO format, you can just use your Infrastructure Manager client and connect an ISO to some VM you must have a 'CDROM' inserted in to.

  For example, if you install Citrix and you have an ISO copy locally or on your network, you can simply start the virtual machine and then click 'connect/disconnect devices on CD' point to your ISO image. VMWare then moved the 'CD' for the virtual machine and it will be accessible as would a normal CDROM.

  When you do that, your local CDROM in the ESX box really is not used for a lot more outside upgrades to ESX 3.5, and even what is done remotely today for ESX 4.

  Hope this helps

• ESXi does not recognize the PCI network cards

  Good afternoon-

  I am trying to add a few new ESXi hosts to my virtual machine environment and I want my NIC integrated with the PCI NICs for tolerance to failures of the team.  ESXi is not to see the PCI network cards.  I can't find a way on how to add them to the host.  Add network cards in VC shows just the cards integrated network, the same as the ESXi console (or what there is of it).  What I'm missing here?  Thanks in advance.

  Server = PowerEdge R710

  Is what model of network interface cards?  You may need to install drivers for them - http://downloads.vmware.com/d/info/datacenter_downloads/vmware_vsphere_4/4#drivers_tools.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• ESXi does not recognize my virtual disks

  I have a new server Dell Tower I'm installing ESXi 4.0 on. I used a hardware RAID card integrated with Raid 1 configured for 2 to 500 GB HD, but when I boot to my ESXi4.0 installation disc it wonder who my hard physics leads to install on... meaning he sees none of my VDisks (3) configured

  any thoughts?

  Thank you, DH

  What model of controller RAID do you have?  What is HCL?  Sounds like you have a software RAID controller (alias: fake RAID.)  Many software RAID controller behaves like your place of observation; ESX cannot use the players individually.

• Tecra S3: Installation of Vista does not recognize the HARD drive

  I try to install Vista Ultimate on my Tecra S3, but installation does not recognize the HARD drive.

  I tried to find the driver for Vista for my computer, but not found RAID.
  Tried it with XP drivers, but no longer works.

  Do you have an idea where I can download Vista drivers for RAID?

  THX

  Hello

  Your suggestion is good. The Tecra S3 supports the RAID, and the RAID driver is required to install the OS on the HARD drive.
  On the European driver Toshiba page I found a RAID for XP driver.

  I put t know if this driver will run under Vista, but I recommend to test.
  The RAID XP 1.3.8.0 driver version can be downloaded from this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Please note; You can store the RAID driver on an external USB and Vista should recognize it!

  Good luck

• Windows XP Home edition does not recognize new HDD on the Qosmio G20

  I have a Qosmio G20/390LS bought a year ago, when I worked at the Japan, I tried to upgrade the hard drive with a new HD 100 GB Hitachi SATA but I faced a problem that XP does not recognize the HD.
  For your reference, the Bios sees the new HD, when I install the XP operating system I load the driver downloaded from the Toshiba Web site but no way RAID with F6... XP does not recognize the HD.

  Do you have any idea how to fix?
  Thank you

  Hello

  Computers portable Japanese are unknown to me, but if this laptop comes with two hard drives and RAID option do not forget the good option is set in the BIOS. Without the right BIOS setting you will not be able to install the OS.

  On Qosmio G30, I was able to install Vista when for two HDD HARD drive settings were 0-RAID-1. Check it please and let us know.

• Win XP does not recognize the second disk in the Qosmio F30

  Hello.

  You have a problem...
  After using the recovery disk WinXP MCE does not recognize! second HARD drive.

  I mean in the Device Manager it's ok I see 2 hdd... but in his only C:\ Explorer

  Utilits RAID recognize also second HARD drive.
  But I'm going to use this HARD drive not for mirorring... I need this second HARD drive as separate HARD drive.

  Could someone help me solve this problem?

  Just format the drive and make it ready for Windows to use.
  Go to control panel-> administration-> computer management tools-> Storage-> disk management

  Here you will find all the options necessary to make your second HARD drive in Windows.

• Used to boot Windows - does not recognize the hard drive

  Hello. I had my computer laptop vostro dell for 5 years, and I've never had a problem. A few weeks ago, I was starting, and I got the blue screen of death. I had the same thing when I rebooted. I bought a SATA dock for recover my files, so I could format it and start from scratch. However, the dock does not detect my HARD drive, although I hear the disc running. I tried to connect a Dell Latitude docking station to transfer the files, but the Latitude does not recognize my HDD ether. Vostro runs XP Home Edition and Zorin OS, Latitude anime XP Pro. HHD in question is a 120 GB Western Digital Scorpio for drinking devices. Help, please.

  You boot from the disk and choose "Try without Unbuntu and change to your computer"?. Honestly, it looks that you have installed. In addition, using raid with Windows Xp support?

  If you have chosen to 'Try' Unbuntu I recommend now you run chkdsk /r from the recovery console. The problem is not with the hard drive probably, but with the file system.

  Download WIndows Xp Recovery Console from HERE. Save the file to your desktop. You will need to burn the iso image to a blank cd using the same way you did to the image ISO of Unbuntu ImgBurn. Although the instructions below refer to a Windows disk, the disk from the Recovery Console that you create will do the same.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

• Prelude does not recognize in car, but not first?

  Hello

  I am trying to ingest files in the prelude, but the program does not recognize the drive (OWC, 8 TB RAID 0, love at first sight).

  I find this curious as first recognizes the drive.

  I tried the back towards the high drive with is the same brand and model, the only difference is that it is RAID 1 - and the two Prelude and first read the disc.

  Thanks for any help,

  -Sally

  I had the same problem and the only solution I could find was to reformat the hard drive.  There was something on the factory setting of my raid drive OWC which did not prelude to recognize the drive during ingestion.  I don't know exactly the problem with the format of the factory default setting, but after the backup drive and reformat, prelude was able to recognize the drive.  Here's a thread, you gave me about the problem.

  https://forums.CreativeCOW.NET/thread/3/957238

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• iTunes on pc does not recognize my iphone. the pc does. the iphone asks me to allow access to what I do

  iTunes on pc does not recognize my iphone. the pc does. the iphone asks me to allow access to what I do

  Hello

  Check this help page: If iTunes does not your iPad, iPhone or iPod - Apple Support

• 12.5.1 iTunes does not recognize the connected device

  iTunes was working fine yesterday, the computer recognizes the device and managed to make a back-up. Put current iTunes 12.5.1 and now iTunes does not recognize that a device is connected. The computer recognizes that a device is connected, it is a device of trust but not iTunes. Even in the file menu, devices is not available. All the USB drivers are up to date and used 3 different usb cords.

  Current iphone OS 10.0.2

  Windows 10

  Hello

  Check this help page: If iTunes does not your iPad, iPhone or iPod - Apple Support

• PC does not recognize my iphone more than 6 s

  iTunes is not pop up when I plug my iphone 6 s more pc and when I open iTunes me it does not recognize my phone.  I want to take my phone pictures is off and put it on pc and delete automatic telephone.  Help

  Try the iOS device is not showing in iTunes for Windows.

  TT2