5.1 the CSA is not agent of the laptop
People,
The new MC 5,1 CSA shows me only agent for desktop and server, how can I generate one for laptop?
No, these other groups should be sufficient. Modules are doing a good job of explaining what they are too.
You will probably need to twist a little to calm well.
Tom S
Tags: Cisco Security
Similar Questions
-
at half way through a CSA deployment I stumbled upon 1 laptop which would not be registered with CSA administration server. The Setup log looks good and the journal of csa says it solves the CSA Management Server. Version 4.01. Partial credit below. Any ideas?
Thank you.
Save failed no message error code = 2031
Registration of server xxxxx, failure (2031)
and for a quick poll.
Run quick survey... Failure (2031).
conn_check: started
conn_check: ip config: ok
conn_check: dns: resolved name xxxxx mgmtserver
conn_check: https: mgmtserver is accessible via https
conn_check: finished
Rick,
Check if this customer is in the saving allowed IP address range by clicking on:
Maintenance > recording control
of in the MC.
Thank you
Josh
-
How do I uninstall B2C Noti Agent .exe program related to LG electronics
Original title: I'm trying to contact Marilyn O on the thread "how to uninstall B2C Noti Agent .exe - is a program in relation to LG Electronics."
Hi, I'm trying to contact Marilyn O on the thread "How uninstall B2C Noti Agent .exe - it's a program related to LG Electronics."
It's more than a year, but I recently just met and IMHO have found a better solution than those posted. So I wanted to share my solution, but the thread has already been locked.Marilyn O, if you read this, is how to disable the annoying popup every time that you log on to your PC:(1) Windows button > msconfig(2) in msconfig, go to the "Startup" tab and uncheck "B2C NotiAgent"In this way, can solve you the problem without having to uninstall all software associated with your LG phone.(P.S. I know this isn't problem Marilyn O but I am shouting to her so that she may be able to change the thread).Hello
Thanks for sharing of the resolution, because it would help the other members of the community to the same question.Your efforts to solve this problem is appreciated. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows -
Original title: replacement disk and windows.
Hello guys.
I am considering buying a new laptop. The model that I found and I like has a HARD drive if I want to replace it with the SSD to the format of my previous laptop. (Due to the low energy consumption, greater speed, etc.). So I have a 256 gb SSD in my previous loan of laptop replace new one HARD disk, yet what will happen with my agent and active Windows 8, I will have bought with the laptop?
I can reinstall windows 8 on the SSD, but I don't have a key to activate their... How will I be able to get the key from previous series if the laptops will only work with a recovery partition these days here? I asked a guy in the store, I buy my laptop since and he told me that he does not know and I have to ask for help. However, to create a message of support I need a serial number of the model I did not because I have not yet bought a laptop, so I don't know what to do... I really don't want to stick with the HARD drive, but also I can't afford another model.
Is it possible to do a recovery with my laptop disk when I get it, then replace the drive with my SSD and run the recovery disc I made?
The laptop I want to buy is an Asus if that helps...
Thanks in advance...
The 'Raw' State is not necessary, it is the State of any drive (SSD drive or hard drive) would be in if you just remove a disk new in box and will need to be "initialized", since you have already used the player already initialized sound.
Do not format the drive, rather than delete all existing partitions, (the SSD shows then as being "unallocated"). Now you are ready to restore the backup Image you created. During the restore process Acronis will recreate the partitions that were on the hard drive on your SSD.
J W Stuart: http://www.pagestart.com
-
6 10 iPhone iOS is not recognized by the laptop Win10Pro
6 10 iPhone iOS is not recognized by the laptop Win10Pro
After the upgrade to iOS 10 on my iPhone 6, is is no longer recognized as an external drive by my Win10Pro x 64 laptop on USB 2.0 or 3.0 port. New cable is used to eliminate that as a problem.
Why is this happening?
I come to the last iOS 9.x.x?
Y at - it and the new driver I need to download on my PC?
I started to automatically backup icloud, but I want to import photos directly to my PC.
Thank you
Vicki
Try opening the iPhone before connecting to Windows. If the film is not empty, then the device should be listed in Windows Explorer. If it still does not show try to restart the computer and the device, and then try again. If it does not show more in iTunes then try iOS device is not showing in iTunes for Windows.
TT2
-
What is the bookmarks on my phone, not syncing with my laptop?
My Favorites from my laptop have synced with my phone, but my favorites on my phone does not match with my laptop. I have the latest version of Firebox on both devices, and since my favorite partially synchronized, I know that I have signed my account on both devices. I checked the setting on my phone and the laptop and both are configured to synchronize bookmarks.
I finally thought to it. If you go to View Bookmarks Sidebar or display all bookmarks, you can see the bookmarks synchronized from your mobile device.
-
Made Firefox update, crashed now all the browsers on the laptop does not
Firefox did an update at 15:00 this afternoon. I was working in an Excel file and Firefox crashed, the window jammed when he says that he has been sending a crash report so I had to close this window. I couldn't restart Firefox, he said of Firefox is already running, when I clicked on "Close Firefox", I get an error message that I remember most, something is missing or is unavailable.
I tried to restart then thought etc I want to use IE to download a new version, it's when I found IE does not work either. It loads, but cannot connect. My internet works, I'm on a laptop backup now without any problems. So I downloaded the installer of Chrome for this laptop, copied to the laptop with no browsers work and tried to install it, it started, but when he tried to connect on the Chrome homepage he just barattes away and unable to connect.
Not sure what may happen, but since it's all browsers I think something in the area of internet configuration needs to be adjusted. Any ideas? I work from home on the Internet for 40 hours a week so needs to work for laptop. The one I use now will be for awhile, but I have to get others to market as soon as possible. Thanks for any help from anyone! O
The two laptops are equipped with Windows 7
Thank you, but I'm done to restore my system to a previous date that solved the problem.
-
I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you
Have you tried:
Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
-
M100 satellite disk restore will not work, keeps on rebooting the laptop
Hello
I have a M100 I need to restore to out of box state. XP is running too slow and after getting some internet pop ups of facebook, the laptop is having issues.
Now, I tried to run the program of restoration of the drive and it happens with ramdisk boot, then the f6 press to install an aditional drivers, then wait.
The mouse cursor appears on the screen and it can be moved around, then the laptop restarts just.I tried this several times and with main power and with and without the battery while on the grid.
I suspected it was a problem of hard disk or a boot sector virus, which prevents the program of restoration of the race. However, I tried a new hard drive and it still does the same thing.
I changed the RAM and still does not. About a year or two ago I had to restore the laptop as the HARD drive died and I replaced it with another hard drive on a different Toshiba laptop and it worked fine.Any help would be greatly appreciated as I need this laptop for school
Thank you
Hello
Sorry, but one thing in this story is strange. Why load additional driver?
If you want to have out of the box to install OS, you must use the Toshiba CD/DVD facilities sent. Using this disk, you do not need to load anything, just start the recovery procedure, let it run and when you're done just restart your laptop. That all s that you do.
So, if you have this original Toshiba drive please do as follow:
Start your laptop and press F12 repeatedly
When the boot menu appears recovery disc into the optical disc drive
In the list, choose the CD/DVD device and press ENTER
Follow the menu on the screen -
Power led on the laptop does not not on Satellite C855
I have a C855. I thought first my charger had ceased to function as the light on the front of the laptop (next to the power light and the wireless light was not on when it has been plugged in.) After a few minutes, I realized that when I unplugged the power cable from the laptop, my screen went dim, while it worked.
But plugged in, this isn't a white light that showed that he was accused. I leave the battery to run down a little then plugged back in and then it will not orange. And said x time before fully charged (windows 10) he got 1 minute, then rose to 99% connected load and the battery light is still orange. There no changes little matter how long I left it plugged in after.
Is that a failure of the cell or battery possible?How it works with AC power only. Have you tried to remove the battery ad test?
-
HP250G4 (M9S81EA): the laptop computer does not see the usb cable
Hello, have a problem with HP250G4 (M9S81EA), doesn't want to install cable diagnostics. After you install the cable drivers, win10-64 cannot define it. All the drivers are installed on your laptop and work properly. The cable is the same worker checked on another laptop. None of the Google tips help not hurt for 3 days with this problem. I hope for your help.
USB device not recognized
Works Yusb last device connected to your computer, and windows cannot identify him.The request failed usb device descriptor
I installed on this laptop Win 7.8.10 and the unit still does not work, I think it's a hardware problem of the laptop. But at the same time, other usb devices are working properly on...
< feature name = 'Application' type = 'Description' sequence-id = "3" >
< attribute name = "a0" value = "HPAdvSysDiag_USBPort" / >
< attribute name = "a1" value="5.9.0.0"/ >
< attribute name = "a2" value = "2" / >
< attribute name = "p1" value = "09/11/2015" / >
< attribute name = "p2" value = "F.1A" / >
< attribute name = 'p3' value = "96.39" / >
< attribute name = "p5" value = "" / >
< attribute name = "p15" value = "2" / >
< attribute name = "p16" value = "0" / >
< attribute name = "p17" value = "0" / >
< attribute name = "p20" value = "00000001" / >
< attribute name = "p4" value = "1" / >
< attribute name = "p0" value = "2015-12-26 22:45:56" / >
< attribute name = "p10" value = "0" / >
< attribute name = "d15" value = "F3" / >
< attribute name = "a4" value="00.00.00.34"/ >
< attribute name = "d0" value = "3" / >
< attribute name = "z0" value = "94L7PW-7R07T8-XD7WMF - 8 d" 7403 "/ >
< attribute name = "e0" value = "434" / >Help someone or not?
-
Software JetDirect 380 X can not see the airport card in the laptop G4 PPC
Hello
I tried to add a customer to the airport. It's a LaserJet 1200. But the software that comes with the JetDirect tells me to install an Airport card in the laptop. Now I can join hpsetup and print to the LJ 1200. But in practice I have to disconnect from the internet and the map Airport. So, I know the JetDirect and LaserJet 1200 work very well. I tried different settings on the airport, but nothing has really changed the software on the laptop not finding the Airport card.
Now I have a WOW goes a Xsense MIH 130 Xrouter, then go to the Airport Express Terminal. All Mac desk top of page 933mh, 1.67 ghz powerbooks. I use OSX10.4 to 10.5.8. I don't know if the router is the problem or if the parameter in the jetdirect should be changed to the ad-hoc to something else. Don't know how to do this. With it, do not see the map Airport, I can't do the enbedded 192.0.0.192. There are a lot of maybe if I do this or if I do this it might work. Since the configuration of the printer in the TCP/IP section page everything below the line, Config by: is not specified.
Thanks for any advice.
Well again I was able to get to the stage 1.6 (in 10.5.8 printing Center is not the same). I could remove the printer that was working on its own network of HP. But was unable to add a printer in 0SX 10.5. Perhaps through IP printing, but do I put as the address? It is the site of HP to get instructions on a 380 X and another printer.
Maybe I should to the left of the printer, but I've changed the SSID in the jetdirect to match the network. The IP printer 192.0.0.192 or 192.0.0.193 or just use the network name it was changed to?
To close, but I thought a few times.
-
Touchpad on the laptop does not scroll upwards or downwards
The touchpad on the laptop does not scroll upwards or downwards, I was offline for 5 weeks that my router broke out between the change of operator, so I had to wait for another.
When I was on the touch pad was'nt working properly. I can't do a system restore, because that would be the former provider. Ideas anyone please?First, check the scrolling settings in the advanced settings of Touchpad.
If they are enabled, uninstall the mouse/keyboard 3rdparty as Logitech or Microsoft and Watcom drivers that may have installed you.
If it's no good, uninstall the Toshiba touchpad driver, then download and install the latest version.
-
My 2 TB Time Capsule is full and will not save. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.
I bought a 2 TB external hard and have used Time Machine to back up. But I also use my time Capsule, which I save wireless.
Any suggestions on getting my TC back up?
One suggestion would be to copy all existing backups that are now on the Time Capsule 2 TB hard disk. Then, clear the TC and start over again with new backups.
A more expensive option... assuming you want to keep all old backups on the TC... would be to add a new TC and start backups goes in this direction.
Another option... If you do not need to keep all old backups now on the TC... would be to erase the TC and start over again with new backups. The benefit of doing this would be that no new material will be necessary, but the downside would be that you lose your old backup history.
-
The Office has a Windows XP Home Edition and the laptop has Windows 7 Home.
It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and themes and this one for plugins.
If you need help with one of your modules, you will need to contact the author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please be afraid not to follow my instructions to the line, as everything can be easily undone.
Maybe you are looking for
-
I use view all bookmarks to set up a menu. This page is now tagged library.When I click on something it often becomes hidden behind the library, rather than to the front where it is supposed to be. It started to happen with the latest update of Firef
-
Comparing NaN constant (s) with buggy results!
Hey people NI Forum! I know that I should be very careful when comparisons on point numbers because of rounding and representation issues. That said, I completely took off guard when I wanted a Boolean "true" If a number is NOT equal to "NaN"... I wa
-
W7 refuses to work after the latest updates!
Last week a few updates came through for W7 Home Premium 64-bit (not sure which service pack, even if it must be later because no SP update has not developed) and they have been installed. After the restart, if I clicked on what whether the computer
-
HP 6830: HP 6830 printing problems
Initially, this printer has been used on a system with Windows 8.1 (64-bit) and it worked flawlessy. After the upgrade to Windows 10 However, he had a few intermittent printing problems. Known upgrades can cause problems I uninstalled/reinstalled and
-
Person called claiming to be taken in charge and took control of my computer
Original title: security I was contacted by "windows supports" regarding the many error messages received by them from my computer. The representative went through several stages with me enter my management files and show me these errors. Then asked