5.5 ESXi and ZFS do not play well together?

Similar Questions

• LaserJet 4 L and Vista do not play well together

  I have my LaserJet 4 L hooked up to a Vista desktop via a parallel to USB adapter, using a USB port.  It works very well for a while.  Then, it will not work.  When it fails, the printer info box shows the file in mode 'impression', but it never reaches the printer. And when I try to cancel printing, it can take five minutes to remove.  If I remove and reinstall the printer, it works for awhile - and then the same thing happens. Sometimes rebooting makes the printer works for a while, but not always.  I use Vista 4 L driver. (HP is not posting a 4L Vista driver on their site - they just will tell you to use the one in Vista.) I manually installed the printer and also leave Vista recognize and install it. I get the same results (bad) anyway.

  I begin to suspect the parallel to USB adapter.  (Believe it or not, its documentation is partly in Chinese, and I bought in the USA).  At this point, I could buy another - or I guess I could buy a card for my computer's parallel port.

  (I know this is an old printer, but it worked flawlessly for 15 years, and I don't like junk food it.)

  Any suggestions to solve this?

  Thank you

  Alan

  I don't got no answer on that.  But I managed to solve this problem.  So, just in case, someone else has this problem:

  It was indeed my parallel to USB adapter.  I bought a new parallel cable USB (a cables unlimited, Micro Center brand). The package called for it is Vista compatible and that it supported a long list of old printers HP, Canon, Epson, Lexmark, Panasonic.  It works perfectly. First of all, I just connected the cable to the computer. Vista recognized and loaded a driver.  Then I plugged the other end into the printer and Vista has recognized the printer and loaded the driver for this.

  Be aware that most of the parallel to USB adapters don't pretend to be Vista compatible - and probably are not.

  Alan

• Zbook 17 G3: M2 and Sata don't play well together

  Hello

  Have a Zbook 17 G3 with a drive as boot drive m2. After adding a second SATA drive may not start automatically. It will start only if I select the disk in the F9 boot menu.

  It is the first in the boot order and no secure startup is enabled.

  Any ideas?

  MVH

  Thomas

  I solved it by deselecting QuickStart.

• Dreamweaver and AngularJS don't play well together

  Hi, I'm starting on Dreamweaver and AngularJS for the moment and so I'll have a go at using them together. He's not going very well, you can more or less run but Design view, there are red lines around things AngularJS and same property that asks you if you want to remove it...

  I note that it seems to be very good support for JQuery, Visual design support.

  I also note that, in the talks on the AngularJS, they almost never mention an IDE.

  Is there a plan to add support for AngularJS? Or I'm fighting just a lost cause?

  Thank you

  If enough people want the feature, I'm sure it will be added. Use this form to submit a feature request/Bug Report Form request

• CS6 and retina display not working well together please help

  I just bought a subscription for cloud creative and installed photoshop and illustrator on a new retina display mac pro book. The interfaces look pixelated, including work plans. All updates are underway.

  I read that the latest updates of adobe are optimized for retina display. I don't know what went wrong.

  Thanks for your time

  Ask in the forums of product for more details. As a first step, check applications that use the file--> information on executable files. Check, it's not accidentally the half res / low DPI mode is activated. Check also in the "about" info you actually have PS 13.1 and HAVE 11.2, not the basic installation. Run the update for the updated versions last software free.

  Mylenium

• PS4 and Cintiq don't play well together

  This problem is related to the Cintiq 21 UX & Photoshop CS4 ONLY!

  I have a Setup dual monitor: Cintiq 21 & NEC 19 LCD Miltisync 90GX2 Opticlear. Both monitors are driven by ATI Radeon HD2600XT separate cards with 512 MB RAM video. The system CPU is a chip of AMD Athlon 64 x 2 Dual core 6000 +. I charge what I believe to be the latest drivers from the website.

  Start on the side of the Cintiq PS4; load AN image; picture of Get with 6 bunk rectangles and rectangles is divided diagonally into half of the URHC to LLHC. Lower half is good image; superior hald is a color United, crudely pixelated or gibberish. Drag the image a bit and as long as it is moved it is picture perfect; stop dragging and he returns to the image of the rectangles of 6. Drag on the NEC monitor and the image is strong and clear when dragging but goes transparent as soon as mouse.

  Start the PS4 on NEC side and everything is as advertised. Just drag the image to the Cintiq, and he is always good. Now slide PS4 sideways Cintiq, and everything is always good. Open another image on the side of the Cintiq and the problem repeats.

  This problem is perfectly reproducible, does not happen with any other software and makes it practically unusable PS4. PS3 works as advertised and has always.  I've done 4 install CS4 to see if that was the problem, including a record meticulous cleaning between installs. Situation is constant through installs it. Curiously, the bridge does not have the problem.  I send to Wacom as well.  I gave 2 jpg what look like images.

  Any advice greatly appreciated

  Dave

  The OpenGL makes CS4 a different animal.  You can try to disable and see if the establishment works this way.  If so, confrim it's a driver problem.

  Make sure you run v. 11.0.1 CS4 and you have the latest video card drivers.

• LR 32-bit and 64-bit catalogs play well together?

  I plan to upgrade my desktop computer for Vista 64 and LR 64, while my laptop will remain with XP 32 and 32 LR. I have all my catalogs on portable players so I can trade office and long laptop synchronization procedures without having to go through (and hold). I'll be able to keep this one set of catalogs also after the upgrade, that is that will be the same catalogues open easily in read/write on LR 32 and 64 LR?

  The underlying database is the same, as long as the LR version is the same. If the key is to make sure that you run x.x LR on the 32-bit computer and LR x.x on the 64-bit computer. If it is x.x LR and the other is LR y.y, then you have a problem. This is true even in operating system platforms. I regularly opens the same catalog on Windows and OS X.

• I rented a movie and he will not play in its entirety.  How can I fix it?

  I rented 'The Martian' and it will not play.  How can I solve this problem?

  Have you tried restarting the computer/device you use? If it does not always correctly, contact iTunes Support: http://reportaproblem.apple.com

• Videos with the extension Bup, IFO and VOB do not play

  File extensions

  My videos with the extension Bup, IFO and VOB does not play. Free file I can download for them to work?

  VLC media player. http://www.videolan.org/VLC/ teengeek.freehostingcloud.com

• I have Windows Vista and I can not play Age of Empires II. What can I do?

  I have Windows Vista so I can not play AoE2. This is my favorite old game and I want to play again... and he says: 'Age of Empires II has stopped working' and 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. Help me!!

  Hello
   
  Put the computer to boot and check if you can play the game:
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
   
   
  Reference: Articles on Age of Empires II
  http://support.Microsoft.com/aoe2kingsfaq
   
   
  I also suggest you get in touch with Age Of Empires Forum which offers the best support.
  http://Forum.AgeCommunity.com/forums/thread/589934.aspx  

• "Sound does not play well and seems to be cut in videos with windows media player 11

  original title: Windows Vista

  Windows media player 11, I have a problem with the sound. background noises seem ok. the main sounds a mute. You can hear the main people you can hear the background. Please help me solve this problem.

  Hello
  Here are a few steps to try:

  No sound

  If Windows Media Player seems to work fine, but you cannot hear the audio, you will have a problem with your speakers or sound card. Check all audio connections if you are using external speakers and to ensure that sound levels are defined correctly and not cut. Use Device Manager to make sure that your sound card works correctly and is selected as the audio device by default.

  No reading

  A file that simply will not play could be related to DRM - Digital Rights Management - which means that the file is protected by copyright and you do not have permission to read the file. You may need to visit a Web site to purchase a license to play the media. Some files are compressed and require a set-top box, known as a codec, installed on your computer. You can identify the codec required of the file name extension, such as. WAV or. MP3. Once again, you will need to download the appropriate codec so that Windows Media Player can decode the multimedia file.

   

  Verification of the sound settings

  Click on Start , then Control Panel
  Select the material and audio and noise
  Under playback.. What icons you see?
  Click Properties and then click headset/speakers
  According to the levels... is at 100% and not CUT?
  Under Advanced... What is the default format?
  Click test... do you get a sound?

   

  Reinstallation of Windows Media Player

  In the control panel...

  Go to "turn on or off Windows features.
  * Disable features Media: Windows Media Player
  * Reset
  * Provide characteristic Media: Windows Media Player

  hope this helps

  B Eddie

• CD and DVD will not play. I get no error messages or anything like that

  Original title: MY CD AND DVD not PLAY NOT AND there is NO error MESSAGE what IS WRONG.dOES - does anyone know HOW I CAN GET RUNNING AGAIN OR IS MY DVD ROM out of USE. PLS HELP.

  I used my dvd rom for some time.but player when I tried to play a cd or dvd's is not to play or read. He just stopped. Tried to restart and repair, but still the same. Do I have to change my dvd rom. pls help.

  Hello

  ·         You did changes to the computer before the show?

  ·         It happens with all CD/DVD or a specific CD/DVD?

  I suggest to run the fixit provided in the link and check if this can help:

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

• Envy23: CD and DVD will not play

  My CD/DVD will not play.

  CyberLink recognizes the drive, but displays the error message "No disk in drive" when inserted an ois.

  similar to windows media player. Have updated the BIOS but no luck have updated from Cyberlink. Can you please help. Very annoying.

  Hello @Brutus2 and @2edo,.

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your posts about how you're not able to get your computers to play the CD or the DVD into the optical drive, and I'd be happy to help you in this case!

  To fix this, I advise you to follow the steps described in this document on disk impossible reading disks (Windows 8). This will help you enable your computer to read and play CD and DVD media on the optical drive.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• After update, some of the clips that have been published have a diagonal stripe on them and they do not play

  Hello everyone,

  After that I have updated to CC to see if I can save export from time to time some of the clips of a diagonal band;

  I heavily edited clips.  Some parts of clips play and some do not. The clips that do not have the diagonal stripe on them.

  
  Is there a way to fix this, so I don't have to do it again.

  Don't know what I'm doing wrong.

  Thank you

  Jason

  Hello

  Somehow, when the first update, the original files became corrupt after the update. It seems that any place where there is an added effect has been corrupted. This horrible. Nearly three hours of footage has been erased. Have to re-register from scratch. Never again. Sign out of my account of cloud and buy Final Cut.

  Thank you

  Jason

• TSSTcorp DVD +-error code RW TS - H653G ATA Device 39. I can't reinstall the driver. What can I do? programs and disks will not play.

  DVD drive no longer appears in the list with the C: drive
  drives can run in the drive.

  Hello

  Code 39 means that the driver is corrupted or missing.

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">