5.5 to 7 screens black and white conversion

Similar Questions

• Black and white conversion.

  What is the best way to convert the colors in black and white in PS CC RAW.

  General Hi P,

  Please visit the following links: black and white conversion using Camera Raw | Black and white conversion using Camera Raw | Peachpit

  5 steps to convert the RAW files to B & W | Popular Photography

  Let me know if it helps.

  Concerning

  Tanuj

• Always the color in the photos after the black and white conversion

  Hello

  I have a very strange problem. After the conversion to black and white photos in Lightroom (no matter if I chose B & W in the basic menu, set the saturation to 0, the HSL value 0 saturation sliders or choose a B & W preset) my photos have still a few colors in them. Before and after have exported them.

  The pictures are taken in RAW with a 550 d or a RX100. Same results for all. I use Lightroom 4.3.

  I searched a lot on google and also here in the forum and have not found anything.

  Any ideas?

  Kind regards

  Julian

  

  If you have Lr and PS side by side they appear identical. If they are not something certainly will not, and I agree with ssprengel that it's most likely a monitor profile bad that one of them is choking on.

  If you don't calibrate and profile the monitor yourself (what is the right way to do it), the safest bet is always to use sRGB (or if you have a wide range of monitor the Adobe RGB, but you do not have). > This thread contains a description of how you do it.

  ---

  Some information:

  Monitor profiles contain two parts. One, quite simply, white fixed point, correct the response curve and remove color casts. It is loaded into the video card (or the screen itself) and affects all across the system. This is the part of the calibration.

  The second part is the profile itself, which is more complex. It is, in short, a complete description of the features of monitor in three-dimensional space color. Among other things, it defines exactly the position of the three primaries. It takes the calibration in the image, so in other words it is a description of the screen in its calibrated State. But only color management applications to read the monitor profile and debug to display accordingly. Other applications just ignore it and send the numbers directly through.

  This second part, the profile itself, is what often causes problems because many profiles are not properly written. Manufacturers of monitor (and portable) are known for this. You would think if he succeeds, but it's not fair.

  To compound things, these bad profiles are often pushed through Windows Update, so that people don't even know they are being installed.

• Is there a convenient way to selectively apply the black and White Conversion?

  First of all, I know how to use the black and white adjustment layer and I am familiar with masking. What I want to do, it's something more complicated.

  When I convert a picture n & B, I often find that there are areas of the image that would benefit from a slightly different treatment than the rest. For example, I have a lot of foliage that I want to run by using the yellow and green Sliders, but maybe there's Green House which I want to clear up instead. Using a black and white layer adjustment I can't make this kind of decision as it effects the entire image. And other layers B & W setting on one has no effect because it has already been converted.

  My first thought was to use two different adjustment layers, one with a mask reversed on the other, but not only is it very clumsy (what happens when you need more of two sets of adjustments, but it always seems to be an area left along the border of the selected areas / unselected masks where some remnants of color.)

  Use B & W adjustment layer and mask areas that you want to assign. Set the blending mode to luminosity. then you can put a final above all convert to the true B & W.

  

• Satellite C50D-A - screen black and white - but HDMI works

  Hello

  I'm gone for a week and when I came back would not work my screen...
  It's just a blank screen of white. If I use the HDMI cable it works very well through television but not the laptop screen.

  I didn't leave it turned on or plugged in while I was away so I'm not sure what would have happened. I can leaving it slightly ajar, but surely, they are designed for it?

  In any case, advice appreciated... It will cost me money or is it a simple solution.

  Thank you all

  laptop works when I connect to an external monitor

  In this case the inside display panel malfunctions and must be replaced.

• After the black and White Conversion, I can still see the color

  LR3.4.1 on a desktop Windows XP SP3.  I opened a raw file in LR, click on change in Silver Efex Pro 2, that the plugin opens and I set the resultant b & w image and save it.  She then appears in LR with the name of the original file and annex suffix Edit-TIFF.  However, instead of appearing in b & w, it appears in color.  I then right-click on that image and select open in Windows Explorer.  I've then right click on the file and select Preview and it appears in the Windows Viewer in b & w.

  So why can't display it in LR in b & W?

  What you see in the library is the preview, which was probably created during the import.  What you visualize in develop is rendered according to the current image data.  Since you changed the image after importing data, the preview of the library has not changed.  Just that the preview is again (there are several ways to do it, but selecting it and using the menu option are the simplest).

• Lightroom black and white to color

  When I download my pictures from my camera to lightroom 2.2 it takes pictures that I shot in black and white and converts them into color t-anyone knows if there is a setting or a way to avoid this?

  Hi Andrew

  I'm assuming that you are shooting in RAW. If you take photos in JPG format, you will get the black and white photos. The reason why you see a black and white in reading on the camera must be because the camera shows a preview in black and white.

  Fortunately for you, RAW capture red, green and blue and combines them into a picture, your photo. If the RAW converter in lightroom necessarily combines the components, which makes a color image.

  It's a good thing. RAW images capture as much as possible, if you have a lot of information and details for a shot as possible.

  Black and white conversion in lightroom allows you to play with colours by photos. If she has imported black and white you would have lost so much information.

  What if you came home for a shoot and directed a shot could have been great in color, or you rushed to film a sunset forgetting that the setting was on black and white...

  To make the lightroom import photos in black and white, you will have to do a develop preset.

  more simple way, forgive me if I'm teaching to suck you eggs.

  1. open lightroom

  2 goto development

  3. click on shades of gray in base salary

  4. right click on the thumbnail on the bottom which is now black and white go gold the PRESETs on the left of the screen by opening the Panel if ifs not here and click on the +.

  5. enter a name of the preset - import IE black and white

  6. Select Auto Grayscale Mix

  7. click on create

  1 preselection made

  To import

  1. click on library

  2. click on file and import - from the disk, the system...

  3. Select the files you want to import as a black and white, check them while they are selected

  go to the development parameters

  has chosen the basic settings and

  According to the information to apply develop settings and select from the drop-down list select import in black and white

  and then import it.

  The pictures you have selected then will be black and white.

  It will work - you may need to remember which photos were black and white as thumbnails in the import dialoge may not be black and white.

  I'm not black and white I want to play with the color that I made in black and white.

  Mode shooting black and white means that you can NEVER have a color version of the photo, so you may lose is a beautiful photo of your bet.

  As you use Lightroom, you're messing around with the images, so shoot color, and then click Grayscale and play them with the mixture of shades of gray, you'll have a lot more fun.

  But who is mentioned above process will bring your black and white photos.

  Hope that helps you

  (I still shoot color and convert every time - even if jpeg)

  Hamish

  www.hamishniven.co.za

• My screen seems to have gone out.  Everything worked well then there black and white vertical lines on the screen.  Had to make a hard stop, bury ashes hold the power button. Now no display

  does that mean if my screen on m MBP15 inches starting to show black and white vertical lines and will not again after that I tried to restart my computer?

  This looks like a bad graphics card. What happens if you hold a flashlight on the screen, you see the desktop or not?

• Satellite L10-192: Video Out (TV screen is black and white)

  Hello

  I recently bought a new notebook Satellite L10-192, and I have trouble with the video out of service.

  The image on the TV screen is black and white. I have read and followed the instructions of the manual (indicate the video mode PAL B, etc.), but it is always black and white.

  I have Win XP Pro without Service Pack.

  Anyone has any advice on this problem? Can I change the resolution or color depth or install Service Packs? Or a Toshiba from the factory CD utility?

  Thanks in advance,

  Zoltan

  Hello

  In my opinion, your settings on the laptop are right but please check your TV also. I put t know if your TV is a S-video port or you use a S-video adapter. Please check menu TV. Maybe it's for S-video option in the port.

  If the TV doesn't have a S-video port, you can connect your unit as follows:
  (1) SVID-adapter that brings back the color! It works with any device with an s-video signal through a plug 4-pin or 7-pin. http://www.s-vid.de/images/SVID.gif
  (2) SCART - / adapter S-video http://www.mediaatlantic.com/product.php/366/1142//8aa0b1bbaf6020c785221873b2a985bd

  Good bye

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• Black and white screen standby?

  My husband and I had apple watches for Christmas.   His poster only in black and white.  Someone knows how to change the color screen?

  Thank you!

  Use on your Apple Watch - Apple Support accessibility features

  * somehow your WATCH is set to grayscale

• Several games limit left 2/3 of the screen and only game in black and white

  Original title - problem with games

  Five of the eight games on my machine here confined to the left 2/3 of the screen and play only in black and white. It's Chess Titan,

  Free Cell, hearts and Spider Solitaire, solitaire. Ink ball, Mahjong-Titals and Minesweeper work very well. I had the same problem with Netflix, but

  acting on the advice of the Csr Support, I have ununstalled and re-installed Silverlight (and had to use the Fix It program to do it). That solved the problem of Netflix

  but not the problem of games. YouTube has never been touched by this issue)

  Note: these problems two weeks ago.

  Microsoft says my video driver customer service must be updated and that I had to go so the manufacturer (Dell). I can't

  implement this driver in programs and features at all.  I don't know what made everything a video driver. It only concerns the functioning of

  (some) games?

  Any suggestions or info appreciated

  Ed Mac

  Thanks for your reply. I tried to uninstall the games, but the Turn Off function did not cooperate.

  I had the problem, however. An outfit with whom I unfortunately chose to do it remotely

  maintenance, but who are if anything more incompetent than the people of Dell installed on my machine one

  program called "Assistant pilot."  Now, it turns out I had two issues which has the same effect on Netflix and 5 of 8 games, i.e. the image limited to 2/3 of the screen and exploitation of black and white only. The Netflix problem solved when Microsoft Csr Serv me sent suggestions on what to do, which was to uninstall and reinstall Microsoft Silverlight and use the Fix It program if there were problems. Now the outfit I mentioned tried time and time again to uninstall Silverlight without success. It appears that they knew no more difficulty I did. Silverlight was the problem here, because they felt properly.

  The problem of games persisted. Microsoft Csr Serv now told me she looked like my update video driver required and suggested I have call the manufacturer, Dell. God forbid!    I know little about computers. they know less. Then I shortened myself of this pilot, a wizard who bethought

  appears on my menu. I ran the program and it came with 20 + drivers requiring an update. One was a NVIDIA driver and I was vaguely aware that they probably had something to do with it.

  Update Ran, problem solved! Note that people who have installed this program to me do not have

  Consider using it to try to solve what was obviously a video problem! Yikes!

  Microsoft stands out as the good guys here. I had spent hours on the phone with Netflix (very useful, but it wasn't their problem) and this other suit. Microsoft pointed me in the right direction without fees.

• When using gpu high performance my laptop screen goes black and white

  HP Touchsmart TM2-1010ea

  Windows 7 64 bit

  recently updated to AVG, nothing of other news.

  When I use the high-performance GPU the laptop screen going black and white, still functional. When you use two screens, the second screen is in color, while the laptop is in black and white. using the screen of the laptop power saving GPU is again in color.

  Hello mcbethtings:

  Welcome to Hp forum. Your question is not in the list. http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=56801&tmp_task=solveCategory&CC=UK&DLC=en&lang=en&LC=en&product=4100044 So, in this case I sujest a restore back to remove what are the mistakes caused by a bad AVG update. GoTo all programs search and type in Recovery Manager click that above and open it. Click Yes (white box) so it apears. Select Microsoft System Restore Click next to three windows now you will see a list of dates, select a date prior to the installation of the update, then click. Let the computer do its restoration. Once done see if your problem is solved, if so try the update again, make you that the update is for 64-bit Windows 7 computers before you download it again. If that happens again once you know what AVG is not compatible for your computer.

  Probably you have only received part of the witch update caused this problem due to the disruption of atmospheres. Sometimes this happens. Put day of my HP only made once. I just did a restore back and downloaded the update again and the second time through work. Please click on Bravo if this solves your problem. Thank you frrw.

• Windows XP 07 login I get the black and white screen where is safe mode option and then just loop it back to the same screen.

  When I powered on my Windows O.S. ' 07 I got the black and white screen where the option of safe mode and when I entered beginning that normally he just came back to the same screen of the suggestions?

  Hi RudyNY,

  1. you have Windows 7 or Windows XP installed on the computer?

  2. you receive an error during the process of loop?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Check to see if you can boot into safe mode in the Advanced menu options and the last good known Configuration.

  http://www.Microsoft.com/windowsxp/using/Setup/support/nostart.mspx

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• Screen Freecell on vista turns black and white

  My freecell turns black and white screen and strange behavior. I use ms vista. It also shows only the #8181 game. It never happens on my XP machine. Thanks for the reply in advance.

  Hi Karen,.

  a. Since when are you facing this problem?

  b. did you change to your system recently?

  c. This only happens with free cell?

  Method 1: I suggest you to uninstall and reinstall the game and check.

  1. close all programs.

  2. click on the Start button and then click Control Panel.

  3. under programs, click on uninstall a program.

  4. in the pane tasks, click on turn Windows features on or off.

  5. in the windows features list, click the plus sign next to games.

  6. under games clear the checkbox for freecell.

  7. you receive a warning message in a pop-up window. Click Yes.

  8. now restart the computer and then go to Windows features turn on or off features. Place a cell check free of charge. You receive a warning message in a pop-up window. Click Yes.

  9. restart your computer.

  Method 2: If the method above is not enough, you can try to create the new user profile and see if the problem still occurs there.

  To create a new profile, you must first create a new user account. When the account is created, a profile will also be created.

  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the new user profile resolves the problem, you can screw the corrupted profile and re - install the applications and programs.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.