Double connection monitor with HP H8 - 1360T

Similar Questions

• Double connection monitor for HP110 Office 110-101 a - b

  These computers are supported on dual monitor Connnectio: HP110 Office 110-101 a - b?

  Hello

  Not much information on its support site:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&product=5441837

  But based on the following specifications, no.:

  http://www.OfficeWorks.dsap.edgekey.NET/shop/OfficeWorks/HP-Tower-110-101-a-b-PC-AMD-4-hete9t21aa

  Kind regards.

• Portege R930 - BSOD when connecting monitor high resolution with HDMI port

  Hello.

  I have a Portege R930 (pt331a-01w001) running Windows 7. All about the laptop works as expected, however, when I connect the laptop on a screen high resolution (2560 x 1440) via the HDMI port, I get a blue screen of death.
  Can I use the HDMI port to connect my 1080 p LCD TV and my monitor to work which is a lower resolution and it works well.

  I tried several cables and different monitors of the same resolution.

  If anyone can help?

  Hello

  Simply said: the laptop not breaks down using external monitor with a less than 2560 x 1440 resolution. Right?

  Find your laptop model.
  [Portege R930 PT331A 01W00101 | http://www.mytoshiba.com.au/support/computers/portege/r930/pt331a-01w00101/specifications]

  and it seems that the device supports the Chipset Intel® QM77 Express and Intel® Graphics Media Accelerator QM77

  I recommend updating the graphics card driver.
  You will find the page of the Toshiba Intel display driver v8.15.10.2712 (Win 7)
  Also, you could test the version downloaded from the Intel page.

• laptop connected to an external monitor with vga cable issues?

  1The votefavorite

  I use a Sony Vaio e series laptop running windows 7 Home premium 64-bit, which I always connect to an external monitor with a VGA cable. I put graphics options to display only on the external monitor and I would like to close the lid of the laptop. In the power settings I put it do nothing when the lid closes. When it is connected to the external screen I am able to look at the screen very well if the lid of the laptop is open. But whenever I close the lid, the display on the external monitor is turned off. I have tried everything I can think of as the use of a keyboard to toggle the display, change the plan to plug the monitor off before and after and even more, to much to list etc. I actually did it on my HD TV using a Hdmi cable that allows me to close the lid. But I want to use it only on my monitor that is sadly only VGA. I know I'm not alone here, I found many forums on the same issue, but nobody seems to have an answer. It is always with the help of a VGA cable when I find others with the same problem. Does anyone know where a response? It seems either VGA may be quite old now since the introduction of HDMI, that Microsoft has not bothered to look on this or get out an update to resolve this issue. Sorry it's just very frustrating because cannot find an answer, and I don't like the laptop overheating or wasting money on energy.

  (1) right click on your power Option icon on the taskbar

  (2) will take you to Options below

  Control Panel:

  Choose what closing the lid"this choice is the 3rd in your list of choices

  The next screen will allow you to configure your choice:

  When I close the lid:

  On battery: do nothing and

  Plugged in: Do nothing

  This will prevent your system/video to go to sleep or stopping

  Hope this helps

• Problem with the mouse when having double (multiple) monitors follow-up.

  I'll start with the configuration of the computer:

  The OS is Windows 7 Ultimate, 64-bit 6.1.7601, Service Pack 1

  Guest operating system is Windows Server 2008 R2 Enterprise Service Pack 1

  VMware Workstation Version 8.0.0 build-471780

  When I have multiple monitors allowed (the resolution is 1920 x 1080), I can't use the second monitor correctly.  In my setup main monitor is on the right, but the question I have also occurs when the primary monitor is on the left.

  In the screen below, I move my mouse to the center of the title bar and click and hold to drag the window.

  

  In this screen, you can see the outline of the window I am dragging to the left.  My mouse is now located to the left of the screen to the right about to cross the box to the left of the monitor.

  

  You can't see the mouse in the image 3 below, but I'm still it moves horizontally to the left.  The outline of the window, howvever, moves to the right and downwards.

  

  In this image of 4th, it is difficult to see the window is now pretty close at the bottom of the screen to the right, but my mouse is completely to the left.

  

  The last image shows that when I bring my mouse to the right (primary) screen, the window comes up to proper placement.

  

  Another finding is that, so Oh the right browser window and I just move my mouse to the left screen, the mouse will change the pointer and the browser would show the link in the bar which position of the mouse would be poorly determined to be on the right screen on a link in the browser State.

  Everything works fine if I keep just to single screen.

  Thanks in advance for any help on this matter.

  Ed

  OK, I've seen the same behavior with:

  Host OS 64-bit Ubuntu 11.04

  The OS Windows XP SP3 32-bit

  VMware Player 4.0.1 528992 build

  workaround that fixed it was uninstall VMware Tools on the guest (8.8.1 build-528969), reboot,.

  then install again with the host operating system were two connected monitors

  the upgrade of Joueur3 Joueur4, HW comments to 8.0 and upgrade update: tools, everything has been done with a single monitor for the host operating system... maybe something went wrong then.

  Post edited by: Hico

• Tecra M5: Double monitors with docking station?

  Hello

  I have a Tecra M5 with docking station, in the past with other laptops, I was able to hook up a monitor by using the analog port and the other with digital and used both with the screen down.

  This seems not possible on this new, I have options to perform a monitor with the laptop or with a TV screen, but not two monitors to separate whole.

  Everyone was able to get this to work if so how? Graphix is the NVIDIA Quadro NVS btw.

  Thank you

  Hello

  It is very interesting, but all I know is not possible. I'm not sure at 100%, but for something like that you need a special graphics card that supports something like that.

  The same situation is with my Tecra. But the idea with two external displays is not bad. :)

• Desktop HP Pavilion 550-A17C: two monitors with desktop HP Pavilion 550-A17C? (Graphics, AMD Radeon R5)

  Hello. My computer is a HP Pavilion Desktop 550 - A17C with AMD Radeon R5 (integrated) graphics card. Can he take charge of two monitors? I did everything I can think of, including searching the Internet for a number of hours for solutions. For the life of me I can't get the computer to detect the second monitor, when I have two connected monitors.

  I connect the main monitor with a VGA cable and the second with a DVI cable. The computer only has a VGA connector and a DVI connector. There is no HDMI port (serioulsly and I bought this computer as three months previously, as a refurb...) (Lol).

  What I want to do, is extend the display. My hardware is unable to conduct two screens? A USB video adapter solve the problem?

  Thank you

  @AFL2016, welcome to the forum.

  First of all, make sure that you use a DVI - D connector:

  

  This is important.

  Here's a guide to help you with the installation.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Tecra S4: cannot switch automatically to an external monitor with APR 3 +.

  Hello

  I used a Tecra S4 (with Windows XP Prof.) with monitor 3 + and with an external 19 "Advanced Port Replicator. If I connect my laptop with the Port Replicator, it will automatically switch to the external display. I have to use the function "FN" to move."

  I signed up the external monitor with "use this device as the primary monitor.
  I don't have this problem with my other laptop Toshiba Tecra A3.

  Now, I think the problem is the geforce graphics card.

  Does anyone have the same problem?
  Thanks for the help and sorry for my bad English; (o)

  Hello

  It works with Tecra S4, too.

  Install new Modules of Commopn
  http://support.toshiba-tro.de/Tedd-files2/0/CMOD-en-20071119111948.zip

  Install the latest Toshiba laptop Extensions
  http://support.toshiba-tro.de/tools/Tecra/TS4/XP/TME/TME-TS4-XP-38400xp-en.zip

  Install the display device change Utility
  http://support.toshiba-tro.de/tools/Tecra/TS4/XP/DPL-change-drv/dspdevchge-TS4-XP-2500-en.zip

  Enter in Control Panel, start Extension mobile controls.
  Go to the tab 'Change of display device' and activate the Service.

  Now, it should work.

• Qosmio X 500 - 13R: picture on external monitor with resolution 2560 x 1440 is blurred

  Hi all

  I have a computer laptop X 500 - 13R Toshiba Qosmio, although 2 years, still a great piece of hardware.

  I just bought a new monitor 27 "U2713HM which supports a resolution of 2560 x 1440.

  Computer video card notebook (GTX 460 m) supports a resolution higher than through a digital connection, so I used a HDMI cable to connect.

  Via Control Panel Nvidia, I could create a custom resolution, but the image is not clear / is blurred.
  It is readable, but it's just not everything.

  Tried with HDMI 1.4, without success.
  I volunteered to connect through Dual Link DVI cable, but the phone doesn't have a DVI connector, and I doubt the adapter will help.

  Anyone has a suggestion how to fix this problem?

  Thank you.

  I would like to share my experience using an external monitor with a HDMI cable.
  My monitor supports both HDMI and DVI port.
  First of all, I plugged my laptop on the external monitor using a HDMI cable to HDMI.
  But the fonts and the picture was not clear. I used the resolution 1920 x 1080

  Then I went to the DVI port. I plugged the laptop s HDMI port to monitor s port DVI (HDMI/DVI cable) and that solved my problem.

  I'm not quite sure the relevance of m this could be for you, but it worth the try

• With the help of a 2nd monitor with HP ENVY bow 27-k009 TouchSmart all-in-One desktop PC

  I would use a 2nd monitor with my HP all-in-one, but I can't figure out how to do this.  Our it guy says it can be done by using a VGA cord DMI but it does not work.  An another computer guy told me to get a USB cord with a graphics driver and technology at Best Buy told me that it is not possible to use a 2nd monitor with this all-in-one specific.  Please let me know if it is possible and how I would go to do.

  Here are the specifications of your HP ENVY tilted 27-k009 TouchSmart all-in - One desktop PC. Based on the specifications, this model, is a video output any. The HDMI port on the side is strictly an ENTRY;

  

  3 HDMI input

  To connect your computer to an external monitor, you will need to buy an adapter USB-to-video, as EVGA UV plus + UV39 or many other cards on the market.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Two monitors with computer desktop Slimline?

  Hello

  I want to set up two monitors with my HP Slimline.  Is this possible?  I know I have to change the graphics card to accommodate two cords.

  Slimline s5310f

  64 bit

  NVIDIA GeForce 6150SE nForce 430

  LG E2360V LED monitor

  Hello

  You have options:

  1. install a video card that supports two monitors. -> the best performance option

  2. use a video USB adapter/converter.   -> What are your needs of video connection? VGA, DVI orHDMI

  3. use a USB attachable monitor such as this AOC 16 "monitor.

  Option #1.

  Look here in HP Partsurfer for video cards that are used in the new Slimline models with a 220 Watt power supply.  These cards have been made specifically for the HP Slimline PC with a 220 watt power supply.

• want to use 24 "iMac as a monitor with my mac book Pro but the iMac doesn't have a port thunderbolt

  Can I connect my iMac 24 "2.16Intel Core 2 Duo with single firewire ports and use it as a monitor with my MacBook Pro (thunderbolt port)? Thank you very much.

  EDIT: What year is your iMac? See if your iMac is supported by the target Display Mode using the link below. If your iMac, you can use a port Mini screen Mini display port cabe using your iMac on your MacBook Pro screen. I hope this helps!

  Use your iMac as a display with the target - Apple Support Display Mode

  P.S. The target Display Mode feature does work through Thunderbolt or Mini display port, you can do this via Firewire, as is any other protocol used to transfer files, not for input/output display.

• Monitors with speakers?

  One of the HP monitors have loudspeakers built-in and audio output ports that can connect to external speakers?

  Hello

  Check this box:

  http://www.NexTag.com/HP-monitors-with-built-in-speakers/products-HTML

  I think not only considered the monitor speakers is a good idea, you need many cables aound except pass by wireless. Just buy a monitor with speakers builtin (many brands autour).

  Kind regards.

• PC HP 8560w: second monitor with Windows 10

  I have upgraded to Windows 10 and my second monitor will not work. On Windows 7, I was running my second monitor with a USB 3.0 port. Apparently, 10 Windows does not support this configuration. How can I feed my second monitor in Windows 10 using either a USB 3.0 or MIC port?

  Thanks in advance.

  Coltrane22

  I'm running an additional monitor in Win10 to a USB connection, but it uses a USB adapter / VGA, and to make it work, I had to install the drivers that came with the card.  Before that I did, Win10 has not even seen the monitor.

  Good luck

• Connection monitor extra/DVI-I connection EVS-1464 (showing the front panel)

  Hello

  Developing a Vision System using the following:

  • LabVIEW 2010 SP1
  • LabVIEW 2010 SP1 real-time
  • Vision development 2010 SP1
  • EVS-1464

  My question is:

  How can I view my front panel, running on the Exchange virtual server on a monitor connected to the DVI - I output of the EVS-1464?

  Thanks in advance!

  Roy

  Hi Roy, I'm not sure if actually read Hossein that KB or not, but she deals with the display on the front panel on the network on a Windows computer, not on via the connection of the monitor on the Exchange virtual server running LabVIEW RT.

  To answer your original question, no, it is not possible to look at the façade of standard LabVIEW on the RT system today. All the code used to display all the buttons on the Panel before the user interface, controls, and indicators are simply not present in LabVIEW Real-time and is only visible on a separate computer that is running the development environment or by using a web browser that has the plugin installed LabVIEW.

  Have a display of the UI on RT is certainly a requested feature and it would be available someday. You can see this request: http://forums.ni.com/t5/LabVIEW-Real-Time-Idea-Exchange/Real-time-display/idi-p/1391108 . He has some good ideas for what other alternatives exist today also.

  However, it is a way to use the monitor on the Exchange virtual server and other LabVIEW RT systems output. Module Vision Development includes video RT on the screw that can display any image on the connected monitor. You can either display images captured from cameras or images custom overlay text and simple graphics objects (lines, circles, rectangles, etc.). It is certainly more effort than normal front panel editor in LabVIEW but it could be adapted to your needs if you want some things to be displayed. You will of course have no mouse/keyboard so that you cannot interact with any display of the elements directly.

  Eric