5 Lightroom doesn't have an available in configurations uninstall, why?

How to uninstall LR5 on a MAC?

Hi bobzg,

There is no program available for Lightroom 5 uninstall.

You can just trash the 5 Lightroom Application.

Tags: Photoshop Lightroom

Similar Questions

  • Windows 8 Wifi doesn't have a valid IP configuration

    Background:
    I've been a happy user of Windows 7.  I did the upgrade of Windows 8 and internet connection seems to work very well for two days. Then, a few days ago Windows made the usual software updates after I shut down my computer.  The next time that I opened it upwards (yesterday), it wouldn't connect to the internet no matter what.  I'm computer savvy so tried all suspects, but to no avail.   I used the troubleshooting tool that came with "WiFi doesn't have a valid IP configuration."    Please don't tell me to turn on/off the router.  Tried that and it doesn't work.  I also tried the following at the command prompt (run as administrator):

    netsh winsock reset catalog (reset winsock entries)

    netsh int ip reset reset.log hit (reset TCP/IP stack).

    Then rebooted and still no luck.

    I am inclined to think that there is a compatibility issue, perhaps pilots.   I have a Toshiba Satellite P750.   The main thing is that my computer is now a useless brick and it's cost me money by not being able to get online (for my work).

    Here's my ipconfig/all the information.  I hope that someone can have useful information to resolve this problem once and for all.  My only other option is to go back to Windows 7 (which actually does not work) and avoid Windows 8 until it becomes a relatively bug free and viable operating system. Thanks for your help.

    ipconfig/all the details below
    Microsoft Windows [Version 6.2.9200]
    (c) Microsoft Corporation, 2012. All rights reserved.

    C:\Windows\System32>ipconfig/all

    Windows IP configuration

    Name of the host...: WRS
    Primary Dns suffix...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.

    Local Area Connection wireless LAN adapter * 11:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft Wi - Fi Direct virtual card
    Physical address.... : 06-DE-2B-5E-3D-FF
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Ethernet connection to the Local network card:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    Description...: Realtek PCIe GBE Family Controller
    Physical address.... : B8-70-F4-D6-8B-9D
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    WiFi wireless LAN adapter:

    The connection-specific DNS suffix. :
    ... Description: Qualcomm Atheros AR9002WB-1NG wireless network adapter
    Physical address.... : 74-DE-2B-5E-3D-FF
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::c1b0:da1b:beff:2d85% 12 (Preferred)
    Autoconfiguration IPv4 address. . : 169.254.45.133 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    DHCPv6 IOOKING...: 242540075
    DHCPv6 DUID customer...: 00-01-00-01-16-28-E4-18-74-DE-2B-5E-3D-FF

    DNS servers: fec0:0:0:ffff:1 1%
    FEC0:0:0:FFFF:2 1%
    FEC0:0:0:FFFF:3 1%
    NetBIOS over TCP/IP...: enabled

    Card tunnel Local Area Connection * 19:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {7AA3C48C-ECE2-45AE-B872-C6440FB89E60}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #2
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    C:\Windows\System32 >

    This he healed for me:

    I kept having the same problem connecting to the hotel Wi-Fi. No problem at home.

    It may have been a coincidence of timing, but my Internet connection was restored from being "limited" by the following text:

    In Internet explorer, go to tools, Internet options, content, and click Clear SSL State.

    Good luck!

  • "Ethernet" doesn't have a valid IP configuration!

    Apparently, a lot of people have had this same problem with the pre-release of windows 8. None of these solutions have worked for me. I use the overview of the developer to win 8 and still getting the same problem.

    In fact, the problem is that I can't access the internet via my wired Ethernet interface. I have a Realtek PCIe network card using the version 7.3.522.2009 of the driver in compatibility mode for Windows 8. I tried all the possible drivers available for the card and the problem persists, while the same card works fine with my Windows Vista. I am able to access the internet via my wireless adapter, but not via the Ethernet card. When I troubleshoot the network card it gives me just the error that "Ethernet doesn't have a valid IP configuration".
    The thing is that my network card is not able to automatically acquire an IP address, even if the DHCP client is active and running. I tried to use
    • ipconfig / renew
    • netsh int ip reset c:\resetlog.txt
    and similar things, but none of them worked. I think I tried literally everything possible to operate before posting here. I hope that someone of you can help me. Really looking forward to y. Thank you.
    Mandatory ipconfig/all is given below
    C:\Windows\System32>ipconfig/all
    Windows IP configuration
    Name of the host...: Qutab-PC
    Primary Dns suffix...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.
    ... DNS suffix search list: tontut.fi
    Ethernet Ethernet adapter:
    The connection-specific DNS suffix. :
    Description...: Realtek PCIe FE Family Controller #2
    Physical address.... : 00-00-00-00-00-00
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::e95c:a986:9d:2ba2% 20 (Preferred)
    Autoconfiguration IPv4 address. . : 169.254.43.162 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    DHCPv6 IOOKING...: 335544320
    DHCPv6 DUID customer...: 00-01-00-01-18-6D-0E-A0-00-24-2C-18-84-39
    DNS servers: fec0:0:0:ffff:1 1%
    FEC0:0:0:FFFF:2 1%
    FEC0:0:0:FFFF:3 1%
    NetBIOS over TCP/IP...: enabled
    Bluetooth network connection Ethernet card:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Device Bluetooth (personal area network)
    Physical address.... : 00-24-7E-4C-58-26
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Local Area Connection wireless LAN adapter * 11:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft Hosted network virtual card
    Physical address.... : 12-24-2C-18-84-39
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Wi - Fi wireless LAN adapter:
    The connection-specific DNS suffix. : tontut.fi
    ... Description: Qualcomm Atheros AR5007 802. 11 b / g WiFi adapt
    Physical address.... : 00-24-2C-18-84-39
    Active DHCP...
    . : Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::61c7:6041:3469:cce8% 12 (Preferred)
    IPv4 address...: 94.237.67.97 (Preferred)
    ... Subnet mask: 255.255.252.0.
    Lease obtained...: Friday, December 28, 2012 10:01:29
    End of the lease...: Friday, December 28, 2012 14:58:02
    ... Default gateway. : 94.237.64.1.
    DHCP server...: 94.237.0.29
    DHCPv6 IOOKING...: 251667500
    DHCPv6 DUID customer...
    . : 00-01-00-01-18-6D-0E-A0-00-24-2C-18-84-39
    DNS servers...: 94.237.0.27
    94.237.0.26
    NetBIOS over TCP/IP...: enabled
    Tunnel adapter isatap. {EBBD9402-654E-4A1C-898F-33188E1CB182}:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft ISATAP adapter
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Tunnel adapter ISATAP.tontut.fi:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. : tontut.fi
    ... Description: Adapter Microsoft ISATAP #2
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Card adapt 6TO4 tunnel:
    The connection-specific DNS suffix. : tontut.fi
    ... Description: Microsoft 6to4 card
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    IPv6 address: 2002:5eed:4361:5eed:4361 (Preferred)
    ... Default gateway. : 2002:c058:6301:
    2002:C058:6301:C058:6301
    DNS servers...: 94.237.0.27
    94.237.0.26
    NetBIOS over TCP/IP...: disabled
    Card tunnel Teredo Tunneling Pseudo-Interface:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    OK guys, I solved the problem! I post here if it helps someone who has a similar problem. I still don't know what was the main problem, but he probably was the pilot.

    So here's what I did to get rid of the problem
    1. Disable all IPv6 traffic (my ISP supports IPv6, so no need to turn it on). A very good link I followed to achieve this--> http://www.techunboxed.com/2012/08/how-to-disable-ipv6-in-windows-8.html
    2. Disable Microsoft Kernel Debug network card, which mysteriously appeared in my device manager. link to follow-> http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/what-is-microsoft-kernel-debug-network-adapter/f72b8408-e4f7-4593-9e18-8cbb3e38a5ad
    3. I noticed that despite the fact that there is no physical address assigned to my NIC (probably a driver problem?), so I assigned a random MAC to my Ethernet interface using a mac generator. Link for the tool--> http://download.cnet.com/Technitium-MAC-Address-Changer/3000-2085_4-10554920.html
    4. Connected to the internet via the Ethernet interface!
    It will be useful.

  • "Connecting to LAN" doesn't have a valid IP configuration

    Yesterday I just internet browsing and all of a sudden my connection died. I check on my ethernet connection and he says that he is not identified. I started to get many fixes and I couldn't find one that solves my problem. My ethernet connection was initially a public connection until I changed it to a working connection where it still does not work. I also tried to diagnose the "connect to the Local network' and it comes up with"Connecting to the Local network"doesn't have a valid IP configuration.

    IPconfig:

    No IP address is valid:

    Hello Alan,.

    Thanks for posting your question on the forum of the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    1. you made any hardware or software changes on your computer before the show?
    2. What is the brand and model of your computer?

    Thank you to provide detailed information on the issue and your efforts to resolve.

    This problem may occur because of corrupted or incorrect settings of Internet connection.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    IP address to renew and check. Please follow these steps:

    a. Click Start and type cmd in the start search box.
    b. right click on cmd , and then click run as administrator.
    c. type the following commands in the command prompt and press ENTER after each.

    ipconfig/release
    ipconfig / renew

    If this does not help, use method 2.

    Method 2:
    Reset TCP/IP and check.
    Refer to this article:
    How to reset TCP/IP using the NetShell utility
    http://Support2.Microsoft.com/kb/299357

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • WiFi doesn't have a valid IP configuration for windows 8

    I bought a computer dell laptop with integrated windows 8 last week.

    The wifi worked for a few days and then all of a sudden it stopped. It shows connected wireless but no internet access.
    Back to diagnose the problem, message foll...
    WiFi doesn't have a valid IP configuration...
    Wifi works fine on others - phone, I - pad except this laptop.
    Pls adv how can I do to solve this. I talked to the provider, but according to him, this is a problem with the router and not the laptop.
    I saw a lot of similar problems on this community as well.

    First of all your router off/on power supply and see if that fixes it.

    If this is not the case, connect to your router and make sure that DHCP is configured to allow enough IP for all your devices.  I've seen where people had set for a range of 5 devices when they arrived the router, keeping it years later, make it have more devices with smart TV, etc.

  • Lightroom has met user authorization. Lightroom doesn't have authorization in writing on some issues of the standard user.

    How can I fix this. I've just updated lightroom 6 and I can't use it

    You can change the permissions on the issues of the WRITE permission.

  • my wireless network connection doesn't have a valid IP configuration

    Hello all I tried all the things after searching the Internet for hours trying to solve this problem.  my computer does not display the available wireless networks.  I tried to renew my IP with ipconfig and it did not work.  I have also reset IP/THC and flush the DNS.  This problem occurred when I tried to change the ip address of my router because it matched my modem so that I could change the security settings.  I was going back to my router ip 192.168.5.1 to correct what I did but I now can not connect to internet at all.  When I go to the command prompt and type ipconfig/all, I get media disconnected with active DHCP and autoconfiguration.  But I also noticed there is no IP listed for IPv4.  If anyone has any ideas on how to solve this problem, it would be greatly appreciated.

    Try to connect by Ethernet cable to your router.
    If this does not work either I suggest that you set your router to the factory settings and to reconfigure him.   I'm not sure what you did, but suspect he touched the routers DHCP service.  Most routers have a built-in reset that you press with a paper clip or similar button and hold for 10 seconds to reset.

  • Firefox and SeaMonkey do not fund any page Web show and active buttons have borders and windows of entry like the one I'm typing in doesn't have borders. The only reason why I can type here, it is that I saw a slider in this large area empty.

    3.6.16 Firefox and SeaMonkey 2.0.13 yesterday stopped displaying the Web page background color. Everything is white. This text box has such a pale gray line around it that I did not know that it is there.
    Each Web page, I watch the same question.
    Bing works correctly.
    IE has been corrupted a month ago and I have stopped using it.
    My Windows 7 programs, Outlook, Word, Excel changed their color settings and a few icons, Print / stick on toolbars are more important as the quality of 1995.

    You can check these possibilities:

    Clear the cache and cookies from sites that cause problems.

    • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
    • 'Delete Cookies' sites causing problems: Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • WiFi doesn't have a valid ip configuration

    I have recently installed windows 8.1 and I was not able to connect to the internet since then. I tried different remedies, I searched on various forums such as using the command prompt, netsh winsock reset catalog and even tried netsh int ip reset reset.log hit , high ipconfig / renew andipconfig/release . But still nothing. I also tried to delete AVG, but still nothing. I'm sure that its also not a router related issue as all the other computers in my home connect to wifi and on top of that, I tried to connect the laptop to different routers and still nothing.

    Hi Ben Hmida,.

    I appreciate the efforts to try to solve the problem. If there is an IP address conflict you might face this problem. You can try to manually assign it the IP address and see if it helps.

    Set the IP address manually.

    1. Right click on the network icon located in the lower right of the screen, and then click Open Network and Sharing Center.
    2. Click change settings card present on the left side of the screen.
    3. In the Properties window for the Ethernet, select Protocol Internet Version 4 (TCP/IPv4) , and then click Properties.
    4. Click the radio button next to use the following IP address.
    5. It will give boxes to enter the IP address, you can type the address, for example, if you have a number of machines begin by setting the IP 192.168.1.100 then go to 192.168.1.101.
    6. The subnet mask has the default value is 255. 255. 255. 0 in most cases.
    7. Copy the default gateway of the network connection details window information.
    8. Copies information from DNS server in the details window - there will probably be two addresses to copy. Refer to the image given below to

    9. close all windows and test your internet connection.

    You can also see the steps in the link below.

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

    Write to us at the State of the question. We will help you to come.

  • wireless network connection doesn't have a valid IP configuration

    tried to clean boot

    tried the ipconfig output

    netsh int reset

    tried to uninstall the driver

    nothing has worked

    Please help me

    Please download the app > run it > download the output to onedrive file or any other file sharing service http://1drv.ms/1FGQ0lU
    Please enter each of them in a command prompt high after you run the above and save the file

    ipconfig/flushdns

    ipconfig/registerdns

    ipconfig/release

    ipconfig / renew

    NETSH winsock reset catalog

    NETSH int ipv4 reset reset.log

    NETSH int ipv6 reset reset.log

    Output

  • I just purchased Lightroom, and it happened today, but on a CD.  My new book of Apple Mac doesn't have a CD player.  What should I do?

    How to install Lightroom on my new Apple's MacBood, which doesn't have a CD player?  I just purchased Lightroom, but it happened on a CD.  Help

    Downloads available:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Tryint to set up a standard modem in Windows XP, however, it doesn't have the Types of available Standard modems

    On Modem Standard (33600)

    I use saved Window XP Professional Version 2002 Service Pack 3. I need to configure a Standard Modem on my computer, however it doesn't have the Types of Standard modems available in the list. However, when I go to control panel-> phone and Modem Options-> Modems-> add-> Next (check don't detect my modem; I will select it from a list.) most computers have a list of Standard Modems (i.e. Standard 56000 bps Modem Standard 33600 bps Modem, etc.), but I do not have those on the list. I need to choose one of those to create the modem that I need for my use. I did it on another computer and it works fine, but the computer I really want it on it does not have the choice to choose a Standard Modem. Any ideas on how to get the installed Standard Microsoft modems?

    Hello

    Follow these steps and check if that helps.

    1. open the file inf under c:\windows\inf

    2. navigate to the modemcsa.inf file.

    3. right click on the file, and then click install.

    4. Once done, check if you have the standard modems listed in the list add a modem.

  • I want to use makeup but Lightroom CC doesn't have the old menu dropdown to select. When I tried to click on "Reset of the Lightroom settings" to restore the old presets, it did not work. Help!

    I want to use makeup but Lightroom CC doesn't have the old menu dropdown to select. When I tried to click on "Reset of the Lightroom settings" to restore the old presets, it did not work. Help!

    You must click on the Option where it says 'Black' and then you will be able to select soften the skin.

  • I bought Lightroom 5 of B & H Photo a few months ago and since then have now upgraded computers. This new computer doesn't have a hard drive and I can't figure out how to download it on my new computer. I must not have created an Adobe account when I

    I bought Lightroom 5 of B & H Photo a few months ago and since then have now upgraded computers. This new computer doesn't have a hard drive and I can't figure out how to download it on my new computer. I must not have created an Adobe account when I initially purchased and downloaded on my other computer. How can I still download it if the serial number does not appear in my plans and products page? I still have the drive and everything that came with it.

    Hello

    Please download the Lightroom 5 application from the link below.

    http://prodesigntools.com/Lightroom-5-DDL-comparison-vs-LR4.html

    Serial number - please visit https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html

    Let us know if this helps!

    Kind regards

    Vivet

  • Lightroom 4 purchased via the Apple App store doesn't have a serial number - cannot move to lightroom 6

    I'm going through 4.4 Lightroom at Lightroom 6 on a Mac under OS X (Lion).  I bought Lightroom 6 one update (I use Lightroom 4).  Lightroom 6 Setup continues to show that he can not find a product 'calling' and calls for a statement of the installed Lightroom product and serial number.  I'm currently under Lightroom 4 purchased through the Apple App Store in 2013; According to information that I can glean about this product... it doesn't have a serial number (if it was purchased through the Apple App Store).  Does anyone have an idea on how to provide a serial number valid for 6 Lightroom Setup?

    iMac OS x 10.9.5

    Adobe Lightroom 4.4 (bought in 2013 through the Apple App Store)

    Adobe Lightroom 6 (bought online an update of Adobe Lightroom 4.X)

    Any help would be appreciated.

    Thank you

    Bruce

    Contact adobe support by clicking on this link then "still need help" as soon as it appears, https://helpx.adobe.com/contact.html

Maybe you are looking for