5 same updates install then reappear to be reinstalled.

Similar Questions

• latest kb952069 security update installed then reappears again and again

  version5.1 (build 2600 xpsp_sp3_gdr.101209 - 1647 service pack 3

  Hi skivesnaylor,

  Follow the steps in the article.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

• Same updates installed several times on close

  Original title: Auto update on stop

  I have XPpro/SP3/IE8 and all MIcrosoft updates.   I find that on stop the same 3 elements are auto-installé several times. They are all elements of the framework .net and so can take up to 10 minutes to stop.  I would appreciate a solution

  Hi Danielarbib,

  You have the numbers KB (Knowledge Base) updates?

  If the same updates are installed on several occasions, there are two probable root causes:

  ·        An error occurred during the installation. The update has not been installed.

  ·        The update has been installed. However, a file was not updated to restart the computer.

  To resolve this issue, please see the Microsoft Knowledge Base article below.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  I hope that the problem will be resolved.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Same update installed successfully every day - can't stop!

  Have the same update "successfully" installed every day on my Windows Vista - attempted to repair using microsoft, but it does not work.  Any other suggestions?

  It is updated to KB2656351.

  Any advice?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/kb2656351-failed-to-install/d0695ef1-1457-4975-8e0e-b072750d6a3c?page=1&TM=1327728408306#footer>

  UTC/GMT is 14:13 Tuesday, January 31, 2012

• I have the same updates install again and again on XP

  Windows Update has installed the following updates at least four times already WIN XP Professional.

  KB2789643

  KB2804577

  KB2742596

  KB27256918

  KB2729450

  KB2604092

  KB2656352

  KB982168

  How to pass all of the nest of updates?

  Thank you.

  Open Windows Update > view update history

  Are only the KB listed as "successfully" installed?

  Are security or optional updates?

  If installed 'successfully', hide updates.  If the update failed, after return from the error # coinciding with KB code #.

• WINDOWS UPDATE I have install the same updates

  Recently, I have restored my computer Windows Vista to factory default.  I loaded all updates (a few at a time) and all have been completed successfully.  Now, it looks like WINDOWS UPDATE is having me reinstall the same updates, as they reappear on the list of updates to be added.  Please tell us what to do.

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
     http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  Windows update General troubleshooting

  Suggestions:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339/

• The same updates Windows 7 repeatedly attempt to install

  So, my sound keeps cutting. Whenever he does I know that Microsoft has decided to install the same update. I'm going to the start menu, and, of course, there are the little exclamation point on the shield. I'll click it... and it will disconnect me, start closing down and the installation. Its always install a part 8. And I'm almost certain it's the same "update" 'installed' and more and more; even if it's Windows, I could be wrong... more strange things happened. How can I prevent this, or at least to get a more useful update that I did not install several times / day and stops at my mute. It is quite frustrating. Thanks :)

  * original title - last update for Windows 7 (2010-05) repeats itself, cannot correct... Please help *.

  Kloxoxoooo,

  Please post with the information requested here:what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations ofKB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 programs and features shows no updates installed...

  My cousin's computer will not show installed updates.  There was a program called SuperOptimizer (malware) installed and I got rid of that and another program incorrect.  I need to see the updates installed, so that I can get rid of the notification of Windows annoying 10.  How the updates installed to reappear?

  The system was scanned and cleaned by Malwarebytes, Bitdefender (I got rid of Microsoft Security Essentials) and the Microsoft Malicious Software Removal Tool.  There must be a way of making appear back without reloading Windows. If anyone has any ideas, your contribution is greatly appreciated.  Thanks in advance.

  P.S. The operating system is Windows 7 Professional 64 bit.

  Select Start, all programs, accessories, right-click right-click command promptand click run as administrator on the menu drop-down... Type cd\ and press ENTER. Type "sfc/scannow damaged = c: \ /OFFWINDIR = c:\windows" without the quotes and press ENTER . When he completed type exit, press ENTER and restart the computer.

  The link to Dropbox doesn't give me access to new files.

• I get the same updates for windows, it seems to download and install properly but then next day return.

  I get the same updates for windows, it seems to download and install properly but then next day return.

  Hi Graxx101,

  ·         Did you do changes on the computer before the show?

  ·         The updates are installed successfully?

  Follow the steps in the article.

  Windows Update or Microsoft Update repeatedly offers the same update

• Install security updates "successfully", but then my computer downloads and installs the same updates again

  Original title: at Microsoft course to resolve this ONGOING problem, & VERY BORING PROBLEM with his Windows security updates?

  Morning everyone,

  There was considerable number of complaints about the failure of Microsoft to solve the problem with its updates of Windows, including updates security for XP, Office 2003, the removal tool malicious and the infamous KB2538242!  I saw these varied complaints not just here, but on some other sites as well forum.

  In the evening of Tuesday, July 12, 2011, I once more has received notification of Update icon in my taskbar and clicked on it to start the updates.  According to the list, there were 5 so-called updates downloaded & installed... as shown below: (my auto-mises update is updated every day at 01:00):

  KB2555917 (a security update for XP)

  KB2538242

  KB2493523 (a security update for Office 2003)

  KB890830 (updated Windows Malicious Software Removal Tool)

  KB2507938 (a security update for XP)

  SUPPOSEDLY... .these updates have been installed.  But, just as happened previously, Microsoft Update icon still reappears in my taskbar within 20 minutes the so-called updates being completed!  Yet once, I went through this cycle of "download & installation" these supposed updates 4 different times before visiting the account that Microsoft has NOT YET SOLVED THIS CURRENT QUESTION! There is absolutely NO help is available, whether of Microsoft at all... except if you're loaded with money to spend on paying them to offer some apology for the problem.  Here ARE the UPDATES security AND in accordance with the PROTOCOLS of MICROSOFT, MICROSOFT IS supposed TO BE PROVIDING SUPPORT FOR THE QUESTIONS OF THIS TYPE! 

  When the problem instead of turning its back on its customers with the blade go Microsoft to wake up and solve this problem continues is to excuse this "oh, there is no support available for these security update issues... unless you are willing to PAY SOME COSTS FOR the SERVICE?  (It was the response I got from one of the support staff for the customer to Microsoft by phone, said by the way!)

  You VERY DEFINITELY have an ongoing responsibility to your Microsoft customers.   What you do to solve this maddening, growing problem, and how a Win XP SP3 client can get any help?

  Welcome & thank you for your comments.

  Please keep us informed of any progress you make, Pete.

• Update version 1.11 of the framework for Windows drivers installed then reverts changes (KB2761494)

  Compter starting December 14, 2012, framework for drivers Windows Update version 1.11 installed then reverts the changes made after the reboot. My computer is Vista SP2, x 86 32-bit. All other updates were up-to-date.

  I uninstalled all versions of .NET 3.5 and 4.0 and then performed the "aggressive" MS Fixit 50202. I then ran that Windows update manually to reinstall .NET and subsequent updates except framework for drivers Windows version 1.11 by hiding. Then I restored the driver framework hidden update and run this update. The update has been successfully installed, a reboot is required.

  After the reboot, Windows open and reported "configuration of updates: stage 3 of 3 to 65% (pause loooong, 2 minutes), then moved to 71% (another long pause, approx. 1.5 minutes), moved to 78% (about 1 minute), moved to 100% then quickly pointed out that the update failed and returning from changes.»

  During this attempt, Windows did not start. It was frozen on a black screen! No hard drive, no display activity. Manual AC offshore and under tension. Windows started and reported "updates were not correctly configured. Returning from the changes. "And finally, Windows starts normally.

  Event Viewer error Windows Servicing 26 times at the time of the recovery. "Servicing Windows could not complete the process in a State of package Package_for_KB971286... in tiered (tiered)" the other KBs referenced in other errors are 2685813, 2685811, 2761494. Associated USB driver are all these KBs.

  I have winusb.dll version 6.0.6001.18000 created 10/23,2008 16.0 KB.

  Apparently, the impossible framework for drivers Windows version 1.11 update this winusb.dll. Please advise or refine this update.

  Thank you.

  Hi Georgeatech,

  Welcome to the Microsoft community.

  According to the description, it looks that you are not able to install Windows Driver Framework version 1.11.

  However, we need more information about the issue to help you better.

  Please help me to answer these questions.

  1. What is the "Windows Driver Framework version 1.11" error?

  2 have had any changes made to the computer before the question.

  I have a couple of steps that should help you to solve this problem.

  Method 1:

  Follow these steps to see the updates of Windows are omitted.

  a. open Windows Update by clicking the Start button, all programsand then click Windows Update.

  (b) in the left pane, click on view update history.

  Method 2:

  In addition , visit this link and see "How to avoid this problem" of this link and check:

  http://support.Microsoft.com/kb/949358

  Note: Try the steps mentioned in the 949358 KB if you get this message even after execution of method 2.

  Also, try the steps mentioned in this link and check:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note These files are not at risk of infection. If analyze you these files, serious performance problems may occur because some files may be locked. If a specific set of files is identified by its name, exclude only files instead of the entire file. Sometimes, the complete file should be excluded. Do not exclude any of these items, based on the file name extension. For example, don't exclude all files that have a said. Microsoft has no control over other files that may use the same as these files extensions.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Windows update repeated says to install the same updates

  OS = vista.
  RE: new updates available
  selected for update.
  Windows says it's installing the updates.
  check "installed updates".
  updates listed.
  These are the updates:
  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2518870)
  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2572078)
  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2633870)
  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656351)
  Updated for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2468871)
  Updated for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2533523)

  Says Windows usually updates installed and ready to turn it back on - it did not.
  The new window updates, explains all the updates above are available and does not seem to recognize that they have already been "installed".
  Suddendly machine may not be used, any open window says "not responding".
  Tried to install the updates again, but same as above.
  Restart the computer.
  I got Thunderbird open and does not and used Firefox to try to access this forum.
  Firefox picked up trying to open on this forum and said not reponding.
  Same as above, nothing had changed and unable to use what whatsoever.
  Uninstalled all the above recent updates.
  The machine works again instantly.
  Open Firefox to access forum, he reported problems with the last session on this site and so I started a new session.
  Everything works well and fast.

  If I look at 'review your update history'
  All the updates mentioned above are presented as successfully installed twice.
  If I look at "the new updates are available," all the installed and then uninstalled updates are listed.

  So before I try to install the updates listed above again, what known problems are there regarding their.
  Why do you have the "check updates insist I had not installed?"
  Why updates has not asked to restart the computer?
  Why install the updates above make it impossible to use any programs?

   

  Hello

  Method 1:

  Run the troubleshooting utility from the link below and see if that helps:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

   

   

  Method 2:

  SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow

  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

• "Updates installs then your computer stops" shows everyday - is this the same update

  original title: "install updates then shuts down your computer"-windows vista home premium

  Start button still shows a small yellow icon next to the 'Off' button that says "install updates then shuts down your computer" every day.  Is this the same update? or malware?  I don't think I'm getting a new update every day. because it says "Installing Update 1 2" whenever I installed.   I ran the antivirus scans and malware and even Spybot - Search and Destroy, apart from a few cookies scans are clean.  This seems to have appeared after the first time I installed this update.  instead of turning off my computer later he just had the black screen and not ended up closing; I had to turn off manually.  The few times that I have installed this "update", it took about 5-7 minutes.  The yellow icon disappeared after installing the updates, but comes back the next time I push the button start.   I even did a restore of the system without result.   How can I get rid of this?

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and check if that helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  Try the steps in the following Microsoft article and check if it helps.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7: http://support.microsoft.com/kb/949358

  Hope the information is useful.

• When I install updated computer then restart successfully

  I have 12 which have been considered important updates waiting to be installed, however I did it twice now and after each attempt that the computer just does not start once the updates have been installed.  It just seems to stop dead.  Then I have to remove the battery to reset the computer completely, then it goes back to a time where he started successfully, but then again wonder to reinstall the same updates.  I don't know what to do, I want to keep everything updated, but something is obviously wrong.  Keep answers as simple as possible, I would not class myself as an expert!

  Hello

  You get the error message?

  Verify that Windows update history for the error.

  Follow the methods below to work on the issue.

  Method 1: Run the fixit from the link below.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/en-us?EntryPoint=lightbox

   

  Method 2: Perform the clean boot and check if you can install updates.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After you perform a clean boot, perform step 7: reset the computer to start as usual of the above article.

  Method 3: Reset Windows update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 4: If the problem persists, follow the steps in the article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

• I get the same update to install, again and again, when the original is installed at 4 or 5 times.

  I get the same update to install, again and again, when the original is installed at 4 or 5 times.

  Hi stevie33

  For the update are facing the issue?

  If you have the update already installed on your computer and always offered several times the update then I suggest refer you to the Microsoft article provided below and follow the steps in resolution-

  http://support.Microsoft.com/kb/910339/

  I hope this helps.