5 years XPS 9000 very slow, need advice to improve/replace components?

Similar Questions

• HP Officejet 4355 printer suddenly start very slow printing! HP technician advice needed!

  Hello
  My all-in-one HP Officejet 4355 printer start suddenly feel very very slow! I've had it for 4 years, and God never gave me any problems (maybe minor once, but never really made me mad), as I used it very often at home and at the office. I always buy the HP original ink cartridge (only once, when I wanted to see how works the charging - it's not) and now the last cartridge has been in the printer for a month or two, nothing unusual, and suddenly my printer starts to print very very slow, if normally it took 10-15 sec for a black and white page now it will take 10 to 15 minutes. Could someone suggest help?
  Please don't talk about the computer/Windows/USB settings, they all work very well. I unplugged the printer from the PC and don't "align the print cartridge. First step, the printed area, took 10 minutes, second step, part of scanning, does not pass. It says printer cannot allocate the alignment page...
  Moreover, I did look around for answers and found that some people say it's a fault of the ink cartridge. But I used this cartridge for a few months now, it's almost, but not yet finished, it was perfectly up to printing. Impressions during this issue come out OK, 7 out of 10.
  Anyone have any ideas? If I could attract professional assistance of technicians of HP, it would be perfect.
  
  Thank you.

  © RedStarLimitless ©

  Although they still ink cartridge may fail and give the results you see, where the printer made a bandage and wait 10-15 seconds for the next Strip. This is caused by the failure of one of your cartridges.  Remove each cartridge and clean the contacts on the cartridge and printer can solve the problem.

  I don't remember if the Officejet 4355 reserve mode supports, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• Speed/performance of my mac mini (mid-2010) is very slow. Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.

  My mac mini (mid-2010) speed/performance is very slow - think of it as a result of letting my kids do "whatever" about it in recent years.  Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.  You will also need to get data out of old PowerBook G4.

  < object edited by host >

  We are users like you.  Search locally by using something like Yelp or similar

  http://www.Yelp.com/search?find_desc=Apple+repair & find_loc = Chicago, + IT & start = 0 & ortby = rating s

  or read a few links which may be relevant on this forum about the slow mac mini

  http://BFY.tw/5C63

• Sometimes my wireless connection is very slow. Our people at work said there must be a lot of people in my neighborhood picky backup me & that I need to put a password on the router.

  sometimes working wireless on my laptop is very slow. Our people at work said there must be a lot of people in my neighborhood picky backup me & that I need to put a password on the router. How can I do this?

  original title: addition of router password?

  The manual is expected to be online. If you have pain to find - know everyone here the brand name and model - it is likely that someone here can help more.

  Basically connect to the interface web (usually via http://192.168.1.1 or http://192.168.0.1 web page with the username "admin") and change the password in the configuration / administrative to something (I suggest 15 + characters including letters - upper and lower case, numbers and symbols) and then find the wireless configuration and change the password for it to something other than the administrative password - but with the same suggestion.  If she uses WEP and you have all the relatively new devices (all purchased in the last 7 years) then I suggest change you in WPA.  If possible, replace WPA2.

  Probably there is also a place where you can see who is connected.

  What type of Internet connection you are paying for?  (Include numbers upstream and downstream, given to you by the service provider and the type...)

• My computer is very slow. I used it for a year.

  original title: slow computer

  my computer is very slow and I have only had for a year I do not download anything that is mainly for testing or research, but I would like to catch up on shows I missed, but they take forever to watch because it's so slow, how can I solve this problem?

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• My macbook pro mid-2012 is very slow. Do I need a new battery?

  Hello world

  Support on this community has helped me tremendously before so I thought I'd post again about a new problem.

  I upgraded my Mac with an SSD, which works very well, with more RAM; However, recently, it has been very slow and train, and I don't know why. RAM is not being crazy, so it must be something else.

  After reading the other posts, I'm thinking maybe I need a new battery? I mean I have 893 cycles ahah. Could someone help with this?

  Here is my log of Etrecheck:

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-07 02:57:40

  Download EtreCheck from https://etrecheck.com

  Time 01:38

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = battery check - Cycle count = 893

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disc information: ⓘ

  500 GB SAMSUNG SSD 850 EVO Disk0: (500,11 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  SAMSUNG SSD 850 EVO 500 G Media (disk0s2) /: 499,11 go-go (287,31 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Configuration files: ⓘ

  / etc/hosts - number: 20

  Guardian: ⓘ

  Any where

  Kernel extensions: ⓘ

  / Library/Extensions

  [loading] com.globaldelight.driver.BoomDevice (1.4 - SDK 10.10 - 2016-06-03) [Support]

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 162 tasks Apple

  [operation] 68 tasks Apple

  Launch system demons: ⓘ

  [loaded] 47 tasks Apple

  [loading] 163 tasks Apple

  [operation] 81 tasks Apple

  Launch officers: ⓘ

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-12) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-02) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-05-12) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-12) [Support]

  [loading] com.adobe.fpsaud.plist (2016-05-09) [Support]

  [loading] com.bombich.ccchelper.plist (2015-11-30) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-02) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2015-01-16) [Support]

  [loading] net.freemacsoft.LiteIcon.LIHelperTool.plist (2014-08-26) [Support]

  [loading] org.cindori.SenseiTool.plist (2015-12-03) [Support]

  [loading] org.cindori.TEAuth.plist (2015-12-03) [Support]

  org.eyebeam.SelfControl.plist [no charge] (2016-04-28) [Support]

  User launch officers: ⓘ

  [failure] com.adobe.ARM. [...]. plist (2016-01-09) [Support]

  Items in user login: ⓘ

  Workflow application (/ Applications/Flux.app)

  PopClip application (/ Applications/PopClip.app)

  BetterSnapTool application (/ Applications/BetterSnapTool.app)

  Alfred 2 Application (/ Applications/Alfred 2.app)

  ClipMenu application (/ Applications/ClipMenu.app)

  Decision on application (/ Applications/Hear.app)

  Fan of Macs control application (/ Applications/Mac Fan Control.app)

  Hocus Focus application (/ Applications/Hocus Focus.app)

  Other applications: ⓘ

  [operation] 2BUA8C4S2C.com.agilebits.onepassword - osx-helper

  [ongoing] com.crystalidea.MacsFanControl.60192

  [ongoing] com.etresoft.EtreCheck.207712

  [ongoing] com.globaldelight.BoomDaemon

  [ongoing] com.google.Chrome.163232

  [ongoing] com.hegenberg.BetterSnapTool.49632

  [ongoing] com.naotaka.ClipMenu.52192

  [ongoing] com.pilotmoon.popclip.291872

  [operation] com.runningwithcrayons.Alfred - 2.166432

  [ongoing] com.uglyapps.HocusFocus.264992

  [ongoing] org.herf.Flux.119072

  [loading] 412 tasks Apple

  [operation] 173 tasks Apple

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-15) [Support]

  GameFacePlugin: GameFacePlugin 1.8.0.1 - SDK 10.5 (2012-11-16) [Support]

  Unity Web Player: UnityPlayer version 5.0.3f2 - SDK 10.6 (2015-08-04) [Support]

  Default browser: 601 - SDK 10.11 (2016-05-17)

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-11-30) [Support]

  FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  Silverlight: 5.1.30514.0 - SDK 10.6 (2015-11-30) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-17)

  Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-21) obsolete! Update

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  PepperFlashPlayer: 21.0.0.242 - SDK 10.6 (2016-06-07) [Support]

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  SharePointBrowserPlugin: 14.4.8 - SDK 10.6 (2015-02-26) [Support]

  JavaAppletPlugin: 15.0.1 - SDK 10.11 (2015-11-30) check the version of

  User Plug-ins internet: ⓘ

  samesurf_screenshare_32: Unknown (2014-08-10)

  Safari extensions: ⓘ

  1Password - AgileBits - https://agilebits.com/onepassword (2015-09-10)

  AdBlock - BetaFish, Inc. - https://getadblock.com (2015-09-27)

  Adblock more - Eyeo GmbH - https://adblockplus.org/ (2015-09-27)

  ClickToFlash - Marc Hoyois - http://hoyois.github.com/safariextensions/clicktoplugin/ (2015-08-04)

  Audio Plug-ins: ⓘ

  Hear: 1.1.6 - SDK 10.8 (2014-11-03) [Support]

  3rd party preference panes: ⓘ

  Flash Player (2016-05-09) [Support]

  FUSE for OS X (OSXFUSE) (2015-10-25) [Support]

  Time Machine: ⓘ

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Destinations:

  Seagate 3TO [Local]

  Total size: TB 3.00

  Total number of backups: 4

  An older backup: 2014-12-12, 14:35

  Last backup: 2015-11-23, 08:35

  Size of backup drive: Excellent

  Size of backup 3.00 TB > (disk size 0 B X 3)

  Top of page process CPU: ⓘ

  67% Google Chrome Helper (6)

  37% Google Chrome

  6% kernel_task

  6% WindowServer

  2% PopClip

  Top of page process of memory: ⓘ

  770 MB Google Chrome Helper (6)

  Kernel_task 747 MB

  Chrome Google 188 MB

  Mdworker (9) 172 MB

  Mds_stores 164 MB

  Virtual memory information: ⓘ

  4.25 GB free RAM

  used 3.75 GB RAM (1.70 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  7 June 2016, 02:50:29 self-test - spent

  Hello. Try restarting your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  If this does not help, follow the instructions below:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  Apart from this, take a look at this article from Apple and follow the instructions to reset NVRAM shown here:How to reset the NVRAM on your Mac - Apple Support

  Try resetting the system management controller: https://support.apple.com/en-us/HT201295

  I also suggest upgrading your RAM.

  I hope this helps!

• My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  Hello

  PCG-7A2L is the configuration of the equipment donated by Sony code. Try to find the model # begins with "VGNFS6". Check the following link to locate the model #:

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264

  The option to upgrade the processor is not available. However, you can check if the RAM can be improved. Enter the model # below for specifications of Marketing:

  http://eSupport.Sony.com/us/p/select-System.pl?Director=docs

  Try the procedure described on the following link to resolve problems when the computer is running slowly:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/39709/c/65, kw/66/39709

  If my post answered your question, please mark it as an "accepted Solution".

• Need to update Wireless DSL internet connection very slow in Vista driver.

  I have a dsl connection, the wireless is very slow.  I have windows vista and bought an ethernet cable and I can not connect via cable. My technician suggested I need to download a driver for a cable modem but can not find such a download via windows vista

  * original title - I need to install a driver for the ethernet cable, I bought for my dsl connection but cannot find a windows vista driver *.

  You do not receive a download for an Ethernet cable.

  Make sure you have the right cable

  And go to the site of the Modem Manufactutrer'e and are looking for the latest version of the Firmware/software for the modem.

  Or if it's the drivers for your network adapter you are referring to:

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  If you have additional problems, I suggest that you ask that technician who advise you on this issue download driver problem.

  See you soon.

  Mick Murphy - Microsoft partner

• I need to install Creative cloud on a computer with a very slow Internet connection.

  I need to install Creative cloud on a computer with a very slow Internet connection.   Is there a way to prepare a file or a DVD so that I didn't need to download the CC apps directly on the slow computer?  Perhaps using the Manager of Adobe Application Manager Enterprise Edition package or similar?

  No, once you start the installation it will ask you how you want to install it.

  • If you have a subscription
  • If you have a serial number
  • Or I f you want to install as a trial

  For all applications in the CCM CS6, you can download the Master Collection Suite CS6 leave (links below):

  Go to http://www.adobe.com/products/catalog.htmland click on 'Try' for any application and then copy and paste the link below into the address bar

  Mac:

  http://trials2.Adobe.com/AdobeProducts/Stam/CS6/OSX10/MasterCollection_CS6_LS16.dmg

  Windows

  http://trials2.adobe.com/AdobeProducts/STAM/CS6/Win32/MasterCollection_CS6_LS16.exe

  http://trials2.Adobe.com/AdobeProducts/Stam/CS6/Win32/MasterCollection_CS6_LS16.7z

  See you soon!

• WebHelp TOC does not display in Firefox and loads very slow in IE... advice?

  We have recently migrated to a webhelp online system so that we do not have to distribute documentation with our software.  We organize the webhelp documentation on our Web site and it's supposed to be accessible from our software.  Our problem is that the table of contents are loading very slowly in IE and does not at all seen Firefox.

  When I run the help locally (on our network or on my workstation), the table of contents works very well.

  During the last hour, I added the script to force the table of contents of synchronization (found on the site Web of Peter G)... and it did not help.

  Any advice on where to look?

  I can pm our URL for the help, if someone thinks it will help them to diagnose.

  Thank you!

  Jim

  (currently using Robohelp 8)

  No problem. Just load the page with the active Console tab. Then select the errors and you will not get the errors.

  Note: The table of contents are also very slow to load in Chrome. You have quite a few projects merged, so be sure that you set the correct speed optimization.

  The help of opening shows two errors in the Firebug console. I get a 404 on a missing file error: "" NetworkError: 404 not found - http://www.foodpro.com/help/release_2.4/webhelp/mergedProjects/FPUSRPRF/whxdata/whtoc.xml".

  The errors indicate that the merged projects 'checkfiles' and 'FPUSRPRF' are missing. I suspect that FF choke on the missing mergedProjects/FPUSRPRF/whxdata/whtoc.xml. Still, execution stops after that.

  But perhaps a merged help guru can tell you more.

  Take a bow

  Willam

• MacBook Pro mid-2012 very slow

  Hello

  My MacBook Pro is very slow (it has gotten worse recently). Applications to take ages to load, Firefox is hogging resources and very slow, get the focus of the mouse has a huge lag and I was spinning.

  Currently I have 4 GB of RAM and is considering the upgrade to 16 GB. You run an EtreCheck report (below). Is there anything else I need to do? Why he began to be so slow after years of reasonable speed? Is there something I can adjust in Firefox?

  Opening documents and get stuff done becomes frustrating!

  Thank you for your support.

  EtreCheck version: 3.0.4 (308)

  Report generated 2016-09-21 12:50:28

  Download https://etrecheck.com EtreCheck

  Duration 09:05

  Performance: average

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  Problem: The computer is too slow

  Description:

  Computer is slow, Internet is slow, the development of the mouse in any program is slow, a lot of spinning.

  Hardware information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Technical details] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 378

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  System software: ⓘ

  OS X El Capitan 10.11.6 (15-1004) - time since started: about 7 days

  Disk information: ⓘ

  Disk0 APPLE drive HARD TOSHIBA MK5065GSXF: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 498,88 (Go 298,35 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 499.25 GB Online

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Information crush: ⓘ

  Apple Inc. Thunderbolt_bus.

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Startup items: ⓘ

  HWNetMgr: Path: / Library/StartupItems/HWNetMgr

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loaded] 7 tasks Apple

  [loading] 149 tasks Apple

  [operation] 66 tasks Apple

  [killed] 16 tasks Apple

  16 killed processes lack of RAM

  Demons of launch system: ⓘ

  [loaded] 45 tasks Apple

  [loading] 143 tasks Apple

  [operation] 86 tasks Apple

  [killed] 16 tasks Apple

  16 killed processes lack of RAM

  Launch officers: ⓘ

  [performance]    HWPortCfg.plist (2015-09-04) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a 23d420d.plist (2016-07-11) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  com.oracle.java.Java - Updater.plist [no charge] [Support]

  [operation] com.trusteer.rapport.rapportd.plist (2016-07-18) [Support]

  [loading] ouc.plist (2015-09-04) [Support]

  Launch of the demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-07-11) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-11) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-30) [Support]

  [operation] com.backblaze.bzserv.plist (2016-07-11) [Support]

  [loading] com.google.keystone.daemon.plist (2016-09-02) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2012-04-02) [Support]

  com.oracle.java.Helper - Tool.plist [no charge] [Support]

  [loading] com.oracle.java.JavaUpdateHelper.plist (2014-06-09) [Support]

  [operation] com.trusteer.rooks.rooksd.plist (2016-07-18) [Support]

  Launch User Agents: ⓘ

  [failure] com.adobe.ARM. [...]. plist (2013-01-06) [Support]

  [operation] com.backblaze.bzbmenu.plist (2016-09-14) [Support]

  Internet Plug-ins: ⓘ

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]

  QuickTime Plugin: 7.7.3 (2016-07-09)

  AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-14) [Support]

  AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-14) [Support]

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]

  Default browser: 601 - SDK 10.11 (2016-07-09)

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-22) [Support]

  SharePointBrowserPlugin: 14.6.8 - SDK 10.6 (2016-09-14) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  3rd party preference panes: ⓘ

  Backblaze Backup (2016-07-11) [Support]

  Flash Player (2016-08-30) [Support]

  Trusteer Endpoint Protection (2016-07-18) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: WE

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 498,88 GB disc used: 200,52 GB

  Destinations:

  FREECOM HDD [Local]

  Total size: 249,72 GB

  Total number of backups: 36

  An older backup: 10 19, 2015, 23:58

  Last backup: 09 17, 2016, 22:59

  Backup disk size: too small

  Backup size GB 249,72 < (disc 200,52 GB X 3)

  Top of page process CPU: ⓘ

  29% firefox

  6% bzfilelist

  4% kernel_task

  3% coreaudiod

  3% WindowServer

  Top of the process of memory: ⓘ

  1.58 GB firefox

  652 MB kernel_task

  Mdworker (11) 123 MB

  Skype 82 MB

  QuickLookSatellite (3) 57 MB

  Information about virtual memory: ⓘ

  26 MB of free RAM

  3.97 GB used RAM (621 MB Cache)

  5.32 GB used Swap

  Due to the limitation of memory, memory virtual swap used 5.32 GB which is the main part of the slowness.

  It would be better to RAM as soon as possible.

• Backups Time Machine very slow on 2015 MacBook Air

  Associated with a topic of discussion between a few days ago (two MacBooks, 10.11.4, a fast Time Machine backup and a very slow), I start a new topic with new information that seem to show it is a problem more general and not related to Time Machine networks.

  Here's the situation:

  • A 2015 MacBook Air, 10.11.4, 8 GB / 512 GB, has extremely slow performance of backup Time Machine, taking 40 hours for the first 300 GB backup and incremental backups for a long time as well
  • TM performance is essentially the same whether on the network (wired Ethernet) or a USB3 external disk
  • When you back up to disk USB3, I confirmed that the information system shows that the port is configured as USB3, not USB2 (nothing else is plugged into the USB port)
  • Tests of bandwidth I/O gross (using dd and iperf) show no problem; the network reached 110 MB/s bandwidth, written network managed at 50 Mbps, external USB3 HD written work at 40-50 MB/s (write hard drive speed limit)
  • 3 other Macs of various ages from 2009-2014 on the same network have no problem at all do backups Time Machine Network; a backup complete first on a 2011 MacBook Pro 500 GB takes 5 hours or more than 10 x faster than the MBA problem
  • Time machine network uses a Linux server running the latest Debian and Netatalk 3.1.8 and the connection is via a USB3/Gigabit adapter, no WiFi, and iperf tests with this arrangement shows 900 MB/s of throughput of the server.  In all cases, the Time Machine and external time Machine Network USB HD have the same symptoms.
  • The problem with MacBook Air is configured the same as the MacBook Pro 2011, which she replaced "daily driver", possible
  • This problem was shown by the MBA since his unboxing conversion, taking 20 hours for his first backup once Setup initially.  Incremental backups now take several hours, leading to interrupted incremental backups and, I believe, databases corrupted backup triggers new full backups that take today the 40 hours.

  Using Terminal Server and iostat, Console, etc, I see that there is significant activity e/s for the backup drive on the order of 20 to 40 MB/s for long periods on the MBA during the TM backup, but during that time the average declared backup size as shown in the window in the console and TM is growing by only 5 GB/hour.  This occur even if the backup will the external drive or a network drive. This seems to mean that the I/O bandwidth to and from the disk hard external, only 1/600 contributes to the progress of the backup.  I am sure that there is overload of certain checks and other tasks, but not to a 600-to-1 ratio.

  I tried to disable the limitation of the I/O of low priority as shown here: http://apple.stackexchange.com/questions/212537/time-machine-ridiculously-slow-a close-el-capitan-upgrade, that helps a bit (maybe 20-30%), but not by a factor of 10 for others.

  I have gone through a number of the Time Machine of Pondini troubleshooting steps, but he found nothing corresponding to these symptoms.

  The only thing I can conclude is that Time Machine, the application or configuration, on this specific MBA, is down. (A single thought that I wrote this to the top that I have not tried: the MBA and the time MBP running VMware Fusion and have a file of 50 + GB VM; on the MBA that is not excluded from TM backups while on the MBP is)

  Does anyone have advice on what to watch next?  In all cases, only one key would be why it seems that only 0.16% of all the bandwidth I/O to the backup drive seems to be actual data backup.

  Once again, three other Macs, all running the same 10.11.4, back to the Time Machine Server perfectly and have for years.  Only this new MBA glue as broken out, either to a network drive or an external hard drive USB3.

  (A single thought that I wrote this to the top that I have not tried: the MBA and the time MBP running VMware Fusion and have a file of 50 + GB VM; on the MBA that is not excluded from TM backups while on the MBP is)

  What happens when you exclude it as the MBP?

• Need advice on this Toshiba laptop to get

  Hello

  Just joined and hope im this ad in the right place. I need advice on this Toshiba laptop to get. It will be used for photo editing. Must have a 15/16 screen. Big screen would be nice. Programs that I run are Adobe and Photoshop light room. I use a wacom tablet with 2 external hard drives. It will be used manly at home and in the studio.

  Thank you very much

  Hi Tacker

  In general I think that the best option for you is to buy notebook series Satellite A. Something like Satellite A665. It's very nice for laptop with good material and enough performance that you can use for your work.

  I prefer laptops with bigger screen so for years I use Satellite P laptops with screens of 17 or 18. Right now I use the Satellite P500. It's the big machine. For me the best Toshiba laptop, I had over the past 10 years.

  When you have a little time to visit Toshiba page for your country and check which models Satellite are available in your country. Choose the one with the better graphics chip, enough Ram and, of course the HARD drive with enough capacity.

  Please be so kind and post comments. It will be nice to read what you think of this.

• Satellite M45-S169 is very slow

  Hello

  I really hope that someone can give me a notice here...
  Recently, my laptop started to work very slowly. I was using Windows Movie Maker to create projects and she began to hang and not save the project... The use of the CP was 100% and the system ran out of memory quickly... Files with avi, wma, jpg files did not open at all and windows Explorer hanging just whenever I tried to open a. He had more than 20 GB of free space on system C drive and about 8 GB of local disk D... In addition, the copy process has just stopped working properly... It took a long time to copy even small files from one place to another... I am not connected to the network, so this isn't the issue...

  I have reinstalled the operating system (Windows XP SP2)... Files with extensions of different media now open... Although not very quickly. But the copy process takes much longer to finish... It is also very slow browsing photos with Windows picture and Fax Viewer.

  If sth wrong with the material from the laptop or the absence of some drivers could cause problems? What and how can I check this? I've had this laptop for 2 years now...
  I'm not very good with PC equipment and do not know what might not work... I greatly appreciate your help... Really need help here...

  Thank you very much

  Hello

  I found two forum threads useful on HDD repair tools:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=33738菊
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=69562𐾺

  Maybe it s an option for you

• Satellite L300-1BW - is very slow

  Hello world!
  Recently, I bought the TOSHIBA SATELLITE L300-1BW (PSLB8E)
  Link: http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK&userAction=SMP_RESU LTS_PAGE & partNumber = PSLB8E-03F007EN & serialNumber = Y8805872q & USER_ACTION = 20number % series

  I need it for my study and using home. Computer runs VERY slowly. Now I have a version of Windows XP Pro SP3 64 bits. The programs that I have only Ms Office, Skype, Nero, antivirus - BitDefender. I play all the games. IM from the application for my study only - using Ms Word.

  My computer has been verified in the service center and no defects of any sore - not any software and hardware, virus damage, no all manufacture faults. The owners of these model please give me advice what to do. I stuck!

  What should I install Windows XP 32 bit or install Windows 2000 or upgrade hardware (memory... whatever)? I won't be disappointed by TOSHIBA!

  Evil appreciate any HELP!

  Hey Buddy,

  Can you be a little more detailed, please? What do you mean with very slow?
  How long it takes so that it starts Windows?
  How long it takes to start an application?

  I have to say that Windows XP 64-bit wasn t popular and there is no official support for Toshiba for this OS. If you use Windows XP, I recommend to install the 32-bit version.

  Did you test your laptop with the factory settings? It works properly with a preinstalled OS from Toshiba?

  I m also owner of the Satellite L300 and I use the preinstalled Windows XP 32 bit of Toshiba. I m very satisfied with this laptop, it s fast enough and need very little energy. :)