HP Color LaserJet MFP M277 Pro: scanning HP Color LaserJet Pro MFP M277

Similar Questions

• Color Laser Jet MFP M277 Pro: Can I scan a document on the HP MFP M277 Color LaserJet Pro printer double-sided?

  Hello

  What I can and, if so, how to scan a document double sided on the Color Laser Jet Pro M277 HP printer MFP?

  Thank you very much

  Paul

  Hello

  No, it only supports printing double-sided, recto verso but scan copy not duplex from the Manual:

  http://h10032.www1.HP.com/CTG/manual/c04474163.PDF

  Kind regards.

• HP Color LaserJet MFP M277 Pro: No software or drivers are available for HP Color LaserJet Pro M277dw MFP

  Trying to download the latest drivers (I couldn't scan with Easy Scan more after the release of macOS sierra 10.12) I received the following massage

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-m277-series/7089945/model/...

  No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product home page.

  PS: My OS has been identified correctly in the web page.

  Hi @pisca46,

  Thank you for joining the HP Forums!

  I understand that there is no drivers for your HP Color LaserJet Pro MFP M277dw on Mac OS X 10.12 Sierra. I am pleased to see that for you!

  You are right that there are currently no drivers available at this time. In the meantime, I suggest trying the rest of this guide, of install a printer Mac driver by using Apple Software Updateand then try using the Apple Image Capture.

  Otherwise, all we can do is wait for the drivers and software provision, or plan to use an older version of Mac OS X.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• Color LaserJet MFP M277 dw Pro: Setup disk gives an error and stops before the connection to the printer

  Hello

  I try to install the printer 'Color LaserJet MFP M277 dw Pro'.
  By inserting the disc into the phase "installation preparation" is 96% and then stops and gives me the error.
  I use Windows XP SP3. It is always installed, but physically disconnected another printer hp (hp 2050).
  (I tried both to disable the antivirus that reduce to a minimal install, but the problem persists).
  Thank you

  Response thanks a lot.
  In the meantime, I contacted the Support of the Italy
  Who suggested that I try to update the driver.
  I downloaded the file "HP_LaserJet_M277_PCL6_Legacy_Print_Driver_14295".
  Automatic extraction and I launched and everything seems to work.
  (I still try to scan and fax if they work).
  Thank you very much.
  Thanks to your colleague Michelle with whom I chatted.
  Contact thank you for the support of Milan that I don't know the name.
  So, I can communicate the solution found.

• MFP M277 dw: Color LaserJet MFP M277dw Pro issues with iMac

  I have a 2015 21.5 "iMac running El Capitan (10.11.3) and a HP Color LaserJet Pro M277dw MFP that falls in offline mode when it is idle for a while.

  Once the Mac has been sleeping, I can no longer copy, scan or fax without having to restart the printer and the iMac. And it is intermittent. This does not happen everytime the iMac goes to sleep, but no doubt it happens once or twice a week.

  The printer is connected both wireless (so that I can print from my iPad in other parts of the House.) and directly to the iMac via USB.

  I have updated all the HP software related and have applied the last update of the HP firmware for the printer as well. I also ran through all the game instructions that were provided with the printer.

  Other troubleshooting tips would be greatly appreciated.

  Hi @RBurgett,

  Thanks for joining the Forums of HP Support for a solution to your fall issue offline printer.

  I understand you have a HP Color LaserJet Pro MFP M277dw connected to a wireless network for your iPad and connected with a USB to your iMac running Mac OS X 10.11.3 El Capitan, but the drops of the printer is offline after has been idle for a while and becomes also insensitive after mode "Eve". I would like to help with that.

  If you see the message on the printer offline on the iMac, it would be because the iMac think he's using the wireless printer, when it should be using the USB connection.

  You should be able to solve that by unplugging the USB cable. Once the USB cable is removed, reset the Mac printing system. If you don't know how to reset the Mac printing system, here is a document of support that can help - reset the printing system.

  After printing Mac system has been reset, you should be able to reconnect the USB cable and add it to printers and Scanners.

  As far as being not able to copy, scan or fax without having to restart the printer and the iMac that could be solved by resetting the printing system and making sure the USB printer is listed in the printers and Scanner. When the printer seem to be insensitive, the first step is to perform a reset of the power on the printer.

  

  Please let me know if that solves the problem, or if you need assistance.

• Color LaserJet Pro 200 M27nw MFP - problem scanning ADF

  Seems to me a new Color LaserJet Pro 200 M27nw MFP running on a PC with Windows 8 and have come to realize that whenever I scan from the ADF Document (CAD), no output file is generated. The original document is drawn in by the document successfully feeder and the printer display indicates that the scan is ready. However, no analysis file is generated. This happens regardless of know if I send the output to USB or to e-mail and if the original document leaves simple or multiple.

  Interestingly, the ADF works fine if I try to produce paper copies, in other words, the printer is able to pull in the leaves o FRENCH original of the document in the ADF (as this either alone or several sheets) and to produce copies of the original successfully. Furthermore, I have no problem to scan multiple or single sheet documents when the original document is loaded by the Scanner flat, rather than the document feeder Scanner.

  Appreciate any help. Thank you

  Stephen

  HI @StephenScerri ,

  I see by your post that when scanning from the ADF there is no output file containing the scan which is generated on USB or e-mail. You can copy the ADF and scan successfully of the bucket. I would like to help.

  Is this printer the Pro 200 M127nw MFP Laserjet

  I have provided a document for how Scan: Windows 8

  When you scan from the magazine, you get an overview of the analysis of the computer software?

  What is the scan preview, but do not save it to the computer?

  What software are you using to scan?

  Try saving the scan on the computer, if you get a preview, to see if it will save the scan it.

  Please provide detailed results if you're still having problems.

  Have a great day!
  Thank you.

• Multifunction color HP LaserJet Pro 200: HP LaserJet Pro 200 color MFP M276nw on El Capitan: Scan does not

  Since my upgrade to El Capitan my USB connected HP LaserJet Pro 200 M276nw MFP color analysis no more.

  What I've tried so far:

  Installed the latest drivers > unsuccessfully

  Tried all the solutions suggested here: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-LaserJet-Pro-200-color-MFP-M276nw-Scanni... > no success

  Have any suggestions what to do next?

  Update: the solution provided in this thread solved my problems:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/HP-LaserJet-2300-not-working-with-El-Capitan/m-p/5281267/highlight/true#M61077

   

• LaserJet MFP M177fw Pro: Problem of scanning color multifunction M177fw

  Hello

  I'm using a MFP HP LaserJet Pro M177fw in my office for awhile. I have no problem with printing and faxing. But I can't do color scans good I can do scans in grayscale at 200 DPI. I get the following error when I try to make a color scan.

  

  I use Windows 10.

  Any suggestions?

  Best regards

  YK

  @Silahtaraga,

  Thanks for the information. I would like you to go ahead and follow the steps below:

  Try disabling your firewall and running the installation to see if it allows you to install, if this does not work try a clean boot and run the HP printer install wizard for Windows , it was created to help Windows 7, Windows 8, Windows 8.1 and 10 users to download and install the latest and most appropriate HP software solution for their HP printer.

  Additionally, make sure that the Firmware is up to date, see here: get printer updates

  If you still run into installation errors, continue here: after Windows 10 Upgrade, printer problems

  Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  To simply say thank you, click the "Thumbs up" below!   If you need more assistance let me know and I will gladly do everything I can to help.

• scan to email on Color LaserJet MFP M177fw Pro

  I'm trying to download the printable 'Scan to Email' on my Color LaserJet MFP M177fw Pro, but he continues to throw an error?

  When I bought the printer (yesterday), I was told that I could put up to Scan in a document and have it automatically send as an e-mail message to a recipient.  How to achieve this?

  Thank you!

  Hi grahammccarthy,

  Welcome to the HP Support forums.  I understand that you want to know how to scan to email using your printer Laserjet Pro MFP M177fw.

  You don't mention the operating system that you use, so I've included links to all the operating systems supported on the way to analyze.  There is a section called "How to scan with HP software" and there you can find a subsection entitled "How to scan to email.  It is in the subsection, you will find the instructions you need to follow to be able to scan to email.

  How to perform a scan: Windows XP

  How to perform a scan: Windows Vista

  How to perform a scan: Windows 7

  How to perform a scan: Windows 8

  How to perform a scan: OS X v10.8

  How to perform a scan: OS X v10.9

• Color LaserJet MFP M177fw Pro: Scan to Mac with Color LaserJet MFP M177fw Pro

  I bought and the latest drivers from hp installation a HP Color LaserJet Pro MFP M177fw. are downloaded and installed.

  I have a Mac and you connect wirelessly to the printer, which works very well. The Mac runs Yosemite 10.10.3

  My question is the digitization. There is no option for scanning anywhere, not on the small screen of the printer not on the usefulness of the printer or any where.

  Summer spend hours online to find an answer and is now well bored.

  I have already reset the disc printing, verified and repaired systems. Can not scan even with the options offered on the forums of hp using Apple caprure or preview. It seems that all these options include versions of OS X prior to Yosemite?

  I buy a multifunction printer that is not scan? I said to the saleswoman that I need a printer that can scan and airprint...

  Is it possible to scan to a mac at all with this printer? Any help?

  Hi @sa9494,

  I see that you have problems with scanning. I will definitely do my best to help you.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Color LaserJet MFP M177fw Pro)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Here is a screenshot of what it should look like. You have the scanning through top tab?

  

  I have also included a document for HP printers - scan with HP Software in OS X v10.10 Yosemite.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  Connect the printer with the USB cable, to see if you have the same results.

  Let me know.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• Color LaserJet PRO M277 MFP: HP Color LaserJet PRO M277 MFP Fax

  Hello

  I'm using my new printer HP COLOR LASERJET MFP M277 PRO and his works fine. I just have1 problem, I want to fax a document and I can't seem to do. Can you please explain me how to fax.

  Thank you

  Hi @RitaR07and welcome to the community of HP.

  I read your message, ask questions about how fax on your HP Color LaserJet MFP M277 PRO, and I want to help him.

  Below, I've posted a document that explains how to set up the printer for faxing, as well as how to send a fax. Please try all the steps in this document and let me know the results, as well as the problems or the error codes that you met.

  Send and receive faxes with the HP Color LaserJet Pro M277n MFP and printers M277dw

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Color Laserjet MFP M277DW Pro: scan to pdf corrupted

  I use Nitro PDF, and every time that I scan to PDF it is said the first page was damaged and has been repaired.   But it is empty, no content on page 1. This will happen if I use the shipper of record or the screen.  I just bought a new laptop, and there was this problem on my old laptop as well.  Scan to JPEG works but then have to take the extra step to convert the JPEG to PDF and it's a hassle.  Why the first page is always corrupt?

  Hello

  Do you have installled of Adobe Reader on your PC? (even if not used as the default viewer)?

  As you can find the system requirements below, it is part of the configuration required to make full use of the printer:

  http://support.HP.com/us-en/product/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/document/c04515051/

  Try to install it starting from the following link, then try to scan the image:

  http://get.Adobe.com/reader/

  Now try to open the file with Nitro PDF, if the same persists check if you can see a difference with Adobe Reader.

  Shlomi

• The HP Laserjet Pro 100 Color MFP 175nw scanning

  Does anyone know if HP Laserjet Pro 100 Color MFP 175nw requires the Ethernet connection to scan documents or WiFi will be sufficient?

  Hello

  The product of its capacity to provide by any method of connection took in charge.

  So you can scan via USB, Ethernet or wireless connection.

  Concerning

  Shlomi

• Color LaserJet pro 200 M276nw MFP - Scan configuration and installation on Mac Yosemite

  Hi all

  I just bought a new LaserJet pro 200 color MFP M276nw and I am trying (for 4 days) to coorectly install it.

  My goal would be to use it via the wifi connection and I put it correctly by the façade.

  When I try to install the printer on wifi, I can install the printer driver, but I can't find the driver for scanning.

  I tried to connect by ethernet and the system to emphasize a multifunction scanner and the printer driver. If use them, it works correctly.

  Whenever I go out the lan cable for use in wifi it lose the scan functions.

  What I am doing wrong?

  Thank you

  Gianluigi

  Hi @gianluigi1982 ,

  I see that you have problems with scanning via the wireless network, but you can scan through an Ethernet connection.

  I would like to help.

  Do you have what drivers installed the printer? (Apple update or the 10.9 download drivers)

  I checked our laboratory with 10.10 installed on this computer and I was able to browse for printers and Scanners on the wireless network.

  Check the version of the driver installed.

  Go to the Apple preferences system, printers, and Scanners, highlight the Laserjet printers, click the print tab on the right side of the window, and select the Options and supplies.
  Under the general tab it will give the list the version of the driver.
  19.9 is one on the lab.

  Which driver you have show?

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (MFP Laserjet Pro 200 M276)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  In the printers and Scanners window, highlight the printer on the left side, to the right of the window, you should have a print/scan tab, click Scan, and then open Scanners and test scanning. If you do not have the scan tab, let me know.

  

  Have you added the printer as your Hello or via the IP protocol? (cannot scan through the IP Protocol)

  You use the automatic IP address or your own static IP address?

  Here is some information for scanning in OS X v10.10 Yosemite without software HP.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• HP laserjet pro 200 color mfp: hp laserjet pro 200 color mfp scan show m276nw

  Hi I have a problem to use the scan software from my PC to scan the document and save it to my PC. Whenever an error message pop up: inaccessible Scanner.

  I use wireless and print without any problem, even I disable the firewall and connect with the printer cable, it still does not work. Please help me to solve the problem, I use the scan function a lot. Thanks in advance.

  Hi @RightOnMoney,

  Welcome to the Forums of HP Support!

  I see that you are having problems scanning with your HP LaserJet Pro 200 M276 MFP printer color. I'd be happy to help you with this.

  If you are able to print, but can't scan. It seems that the HP software is corrupted.

  Printing and scanning doctor may be able to correct the problem for us.

  • Please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.
  • What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If printing and scanning doctor does not resolve the problem, please uninstall and reinstall the HP software.

  • Monofunctional and multifunction printers - HP printer software uninstall.
  • Important! Please use the printer Install Wizard. The HP printer installation wizard detects automatically the best print available for your HP printer driver. Download and run The Installation Wizard for printer () a free tool from HP. When you click this link, HP printer installation wizard is downloaded using the download of your Internet browser capabilities.