550. 045 t CTO: 550 - 045 t CTO wireless?

Similar Questions

• Pavilion 550 - 032L: network (Ethernet, wireless), PCI, BCM43142A0 can not find the driver for win7 64 bit

  Wireless 802.11b/g/n LAN featuring single-band (2.4 Ghz), 1 x 1 technology

  Ethernet LAN: Realtek RTL8151GH-CG

  PCI and BCM43142A0 of Palivion HP 550 - 032L

  Can not find the driver for OS: Windows 7-64 bit!

  Help me, please!

  Hello

  Please try:

  Wireless:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_135105_1

  Wired (LAN)

  http://ftp.HP.com/pub/SoftPaq/sp71001-71500/sp71102.exe

  Kind regards.

• Pavilion 550-122nd: mouse and wireless keyboard do not work before Windows starts (10)

  The wireless keyboard and mouse (that came with the computer) do not work until Windows is started.

  I want to make a (ghost) image of my hard drive using the boot CD Norton ghost 15.0 (but it also applies to other bootable devices).

  When the CD boots and the program starts I have to click a button (OK / accept) to continue. At this point the wireless keyboard and mouse are not active jet. This is why I can't continue.

  Use a USB keyboard gives the same result (also not active at this point).

  Is there a solution / work around for this?

  Thank you.

  On the pilots seems plausible. Especially because on my laptop (older) with Windows 10 CD bootable (like Norton Ghost) don't Duke keyboard and mouse.

  I'll have a look at the new version of the BIOS and start looking for new tools that will accept my keyboard (and mouse).

  Thank you.

• HP Pavilion dv6 a1u58av: drivers Hp Pavilion dv6 a1u58av Can not find good Wifi

  Hey! I seem to have a problem.

  I just did a clean install of Windows 7 on my HP Pavilion dv6. In the BIOS it says it's an a1u58av. (dv6t 6 c 00?)

  I used this page to get all of my drivers:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV6-entertainment-notebook-PC-series/521...

  All those I work except for the Wifi drivers. I downloaded the ralink those, and they do not seem to work. I get the windows error message that they do not seem to be installed correctly. After several attempts, research on Google and it recharges, I still can't connect to wifi, or even find task bar icon in my status bar. Realtek LAN drivers work for the ethernet, and this is what I currently use.

  Any help would be greatly appreciated, thank you!

  Hello

  It's a machine CTO, wireless card can be one of the following:

  

  Source: http://PartSurfer.HP.com/search.aspx?SearchText=A1U58AV 

  To find out which, you need the hardware id. Please use following instructions to get hardware id missing then return:

  http://www.WikiHow.com/find-hardware-ID

  Kind regards.

• Cannot print using network printer on Windows 7.

  Original title: Windows 7 can't connect to a network CLP-550

  I've been chasing this problem for a while.  For some reason, my Windows 7 laptop has lost the ability to print at a Samsung CLP-550, connected to a wireless router.  I can see the document to print in the print queue in windows, but it is not transmitted to the printer.  The State eventually says error - printing.  Can I use a web browser to connect to the web server printer to http://192.168.1.104, but Windows can't detect the printer add printer.  I downloaded the latest drivers, with nothing positive to report.  Utilities Samsung see the printer without problem.  I have a XP printer that can print without problem.  I tried to create another user account, but that no longer works.  Anyone have any ideas?

  Hello

  Run the printer Troubleshooter and restart this article print spooler services and check if the problem persists.

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  See also:

  I can't print to a network printer

  (Valid also for Windows 7 steps)

• Want to 750 - xt 550 (CTO): Desktop problems Bang and Olufsen Sound of 750 - xt HP Envy with the brand-new office

  I bought a new system and it arrived yesterday, in the introduction, I have a 5.1 speakers Creative Labs system (which worked perfectly in my previous HP media center PC) I'm connected (using the catch green, black and Orange on the back of the system).  Using the Bang and Olufsen 'test' feature, I hear from "front speakers' (green connector), the Center and the subwoofer (Orange wire) no sound from the surround speakers (black wire).  The sound is HORRIBLE, roaring, low volume, just horrible.

  If I pass the black cable (surround) at the entrance to white (side speakers) I can hear the sound on the 5 speakers, it's always horrible and very, very disappointing!  I spent over 4 hours on the phone last night with HP Support who told me, in conclusion, that my system does not support sound 5.1, I will be able to use Stero (i.e., the Green connector).  My number is 3023344605, the discussion was just a mess.

  Can somone suggest please how can I get my sound working properly?

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.
  If you are unfamiliar with works as a private of the Forum messages, this post has instructions.

• Thunderbird is get Messenger error 550-"SC-002 [COLO-MC3-F42] when I send to Hotmail to my wife"

  Dear friends,

  I can send an email to [[email protected]] wife of my Gmail account:

  I can email me [[email protected]], which is on "Thunderbird", from his Hotmail account:

  BUT, when I try to email HIM via "Thunderbird" my emails are rejected, and I get the unknown address above error 550-"SC-002 [COLO-MC3-F42] failure message!

  All this is WELL above my head!

  Please can you explain what to do here?

  Kind regards

  Ralph Fraser

  Thank you. If he had not returned to normal I would have contacted ePhone Co - op.

• Message violates guidelines send IPv6 on PTR 550 5.7.1 documents and authentication

  I use OS X Server (El Capitan) as my personal mail server. Everything is set up correctly. Mail works fine for everything except google gmail. This has happened for 2-3 years... whenever I have send emails to users of Gmail, I get "reviewed mail returned to sender" which explains "this message does not respect guidelines send IPv6 on PTR 550 5.7.1 records and authentication»

  How can this be repaired?

  I resolved to myself.

  After digging the question (there is a post in the communities of Apple Support by Paul Derby 'Blocks Google's IPv6 email receipt sent by OS X Server'), I found the hack to force postfix to use IPv4 only not for work.

  Instead of this, I found myself setting the configure IPv6 in the 'link-local only' in the advanced configuration of network Ethernet. (She had been established to 'Automatically', perhaps by default, when update OS X - Server some time ago.)

  I can now send to addresses gmail from my client devices without problem. However, it seems that the accessibility of the Internet is not working now and so I disabled it (a small price to pay).

• A usb 3.0 card can be upgraded to the HP Pavilion Elite e9150t CTO desktop computer?

  I have a HP Pavilion Elite e9150t CTO Office, which has been upgraded to Win7 64-bit.  Could I move to the newer and faster usb 3.0 by purchasing and installing a card with usb ports?

  Hello

  Based on the following specifications, it has a few free PCIe connectors:

  http://support.HP.com/us-en/document/c01792852

  You can add a card PCIe USB 3.0 on your computer such as:

  http://www.eBay.com.au/BHP/USB-3-0-PCI-e-card

  Kind regards.

• HP ENVY 17 t-k000 CTO: HP ENVY 17 t-k000 CTO WiFi driver (Windows 7 x 64)

  HP ENVY 17 t-k000 CTO WiFi driver (Windows 7 x 64)

  I've just killed my machine from Windows 8.1 stock that came with Windows 7 Pro x 64. I was able to install all the necessary drivers and software located on this page, except for one.

  <http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063 & lc = on & cc = us & dlc = in & sw_lang = & product = 7174...

  However, none of the Wireless LAN drivers worked. (I tried just in case)

  When installing Windows 8.1, I was able to tell that the WiFi card installed was a feature of Broadcom, but the driver on the support page for this machine does not work.

  I tried the last few days but I find no related article this topic.

  Does anyone know of another driver who can work with my camera?

  Hello:

  Here you go...

  network controller:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?s wItemId = ob_133353_1 #tab1

  bcm43142a0 (bluetooth)

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloa dIndex? softwareitem = ob-132205-1 & cc = us & dlc = en & lc = fr...

• No audio signal through HDMI (dv9700t CTO)

  HP Pavilion dv9700t CTO Entertainment Notebook PC / Windows Vista 64-bit

  I put the audio device by default for the device "Realtek Digital Output. I have no sound.

  I've updated the audio drivers on the HP support site. Still no sound via HDMI. (the microphone quality was reduced at the point of being worthless)

  I have updated the drivers with drivers from the site Web of Realtek. Still no sound via HDMI. (I found micro feature)

  The box of bolt that I'm trying to connect to indicates that there is no audio signal passed him from this source (my laptop). I even tried to connect directly to the tv. Which doesn't work anymore.

  Its almost as if there was no link between the audio and HDMI port.

  

  Message edited by Slybo on 12/23/2008 06:22
  Message edited by Slybo on 12/23/2008 06:24

  I have dv9758ca and I have the same problem. No sound with the yamaha receiver. I sound with my LG TV and I tried with an Onkiyo recevier and it worked.

  Once I had the sound on the yamaha (was a flook). the image was running on the TV and the screen of the computer (which is not normal) at the same time. then I concluded that the problem is the HDCP protection. the yamaha recevier is HDCP.

  I've still did not know what the solution is, I just wanted to share my experience

• HP PAVILION 550-126: start PC Desktop Monitor question

  Installed a HP Pavillion PC with Windows 10 550-126.  I plugged my old model monitor (2009) PC Pavillion, which is a HP 2009 m.  HP 2009 m monitor had a DVI connection, so I bought a DVI adapter to HDMI to connect the new 550-126 Pavilion.  At the start of the monitor shows nothing.  It takes a long time (5-10 minutes) before the login page appears.  When starting I have pressed the "Source" button on the HP 2009 m monitor and it comes up with a block that says "Check Vidoe cable", the block is delivered on one that says DVI is scanning, then digital asset.  I'm trying to understand if the problem is I use an adapter DVI to HDMI or if there is something else that happens - or I need to get a screen that has a direct HDMI to HDMI connection.

  Thanks for the help.

  It's the adapter.

  If you want the video to appear quickly, you'll need a display more modern.

  Yours is a type of old-school LCD vice a LED modern type.

  Fortunately, most modern screens usually have a HDMI input.

• Pavilion 550-203na: what audio tracks are necessary

  I have a pavilion PC 550-203na which has realtak audion HDTV connected to an AOC12369VM monitor that integrates speakers.

  I have connected the monitor with a HDMI cable

  When I right click the sound icon in the lower right corner of my screen it says "Realteak speakers high definition audio not connected."

  Can I also connect a cable to the audio jack on the back of the computer? I tried this and didn't get any noise coming from the screen, speakers.

  If I plug headphones in the fron decision-making then I hear of them and the sound icon shows "Realtek high definition audio connected speakers"

  I am now confused

  Hello:

  If you normally can get her off the monitors with a HDMI cable, on your PC, you must go to control panel > hardware and sound > Sound (click on manage Audio devices) and select the exit HDMI AMD.

  Sound comes from the AMD graphics card that has your PC via the HDMI cable.

  The Realtek HD audio feeds a separate set of speakers, or you can plug the clear green audio cable to both the port on the back of the PC audio output and audio in port on your monitor (if it exists), stage monitors that would work a lot too.

• Pavilion 550-279na: GPU and PSU upgrade for Pavilion 550-279

  Hello

  I have a HP Pavilion 550-279na. While it fits most of my needs, I enjoy the occasional game and found that the GPU that is it came with, the Radeon R5 330 does not offer enough "oomph".

  http://support.HP.com/GB-en/document/c04949172

  I had a quick glance and think that the Nvidia GTX 750ti would probably answer my needs.

  Don't you think that this card would fit in my PC?

  Also, I guess 180W POWER supply that it came with is not sufficient to run a faster GPU, you have any recommendations on the size or model that would suit the Pavilion.

  My apologies if these are very secular issues, my knowledge of material isn't at the height!

  Thanks for any help.

  Charlie

  Greetings,

  Your PC has the correct UEFI BIOS.

  The GTX 750Ti requires a minimum 300 Watt power supply.

  You must measure the space available along the existing graphics card and compare it to the length of the backup. The 750 is 5.7 inches long. The 750 is a dual slot card. Make sure you have room and you can check out a second plate of Panel rear I/O to install the card.

  It must fit unless it's really tight in your chassis with the existing card.

  Same problem with the power supply. Verify that you can install a power supply 350 Watt or 400 watts.

  I prefer modular Corsair or Seasonic power switching.

  Make sure that you disable secure boot and enable the legacy boot in the BIOS.

  Also to uninstall all of the AMD graphics drivers and software before you install the card GTX 750.

  See you soon!

• HP 550-153W: updates for HP 550-153W

  Hello. I've always wanted to upgrade a PC and recently I bought this HP 550-153W office at a good price. I've already updated the 16 GB RAM and I want to put a good graphics on this card. However, I'm not that tech savy.

  I know I need at least 500 watts power. But I don't know who is compatible. I would like to also know the best sub $300 graphics card I can put on it that corresponds to the case and works well with the specs of the device.  Maybe these questions are too broad, but I have no idea how to put it in simpler terms.

  Thank you

  Hi @ART1985,
  
  Please become a member of the HP's Support Forums. I understand that you have a question about the video card upgrade. I'll be happy to help you.

  The computer that you only comes with a power supply 180W, as you say that needs to be changed.

  The motherboard has a port of Gen 3.0 PCIe x 16. It's more the command type for current video cards.

  As an employee of HP I can't suggest a card.  But I can suggest you do a google search for the reference of the video card.  Look for the top four in your price range.  Then, look at plug for power and size.  for example you can not hold a card 10 "in a conflict with the memory module.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.