5550hdn: card slot not initialized

Similar Questions

• SD card slot not working on Tecra M2

  My Tecra M2 with XP pro SP3 fails to read the sd card, to 2Gbyte. When I insert the widowed card goes ' ding ding ', but the map does not appear in Solution Explorer. Several different cards have been tried.

  The sd slot is represented by a yellow exclamation point in Device Manager, and Code 10 report is given. I tried diifenet pilots re-loads, and sometimes he gives a warning: code 9. I checked the bios and the sd slot is enabled. and I tried a microsoft KB921413 fix, but it would be not installed stating that it was older than the installed version.

  Looking at the driver download section, there is no SD driver as such, just a copula of whick utilities that I have already installed.

  all other sections of the computer seems to work OK

  I'm a bit stuck now suggestions?

  Brian

  > In Device Manager the sd slot is represented by a yellow exclamation point and the report of the 10 Code is given
  This means that SD card controller is not correctly recognized and the device is not functioning properly.
  In most cases, the installation of the new driver should help to address this problem.

  See the European driver of Toshiba page and download the * SD Secure Module driver * for Tecra M3.
  Check if you can install it on your M2

  I think this should help you!

• Satellite U300-151 - SD card slot does not

  I have the Toshiba Satellite U300-151 (PSU30E-074017AR) model that follows the
  SD card slot not working do not I have install windows XP SP 3, & is installed 100%, I need to fix this...

  Please chk this link:

  Hello!

  What do you mean with her does not work?
  The computer recognizes an SD card?
  The card reader is listed in Device Manager?

  As a first step, you must update the SD card driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• SD card slot does not work on Windows Vista

  I just installed Windows Vista RC1, which has just been published

  Just about everything works except the secure digital memory card slot.

  Until I installed Vista I ran the Compatibility Wizard and he said a few things that may not work, but the one that stood out was "SD Memory Card Format Utility.

  I guess that's why the memory card slot is not working?

  Anyone know how to operate? This isn't the end of the world because I can use the docking station, but his practice which he just work directly at the exit.

  Any help would be great.

  Thank you

  Maybe the new operating system Vista doesn t include the compatible driver for the SD card controller.
  Right now the Vista is not supported by Toshiba because this OS is not official on the market.

• Satellite X 200-slot for flash card does not work

  Hi, I got a Toshiba Satellite X 200 23 P with Vista.
  my flash memory card slot does not work, I use an SD card that I've used a few months ago and it worked well.
  When I put the card, nothing happens.

  Help, please.
  Thank you

  You see the SD card in disk management?

  Do you have the yellow marks in Device Manager? Maybe you should also update the card reader driver. A newer version, you can find on the European site of Toshiba.

  In addition, you should test another SD card. The card is maybe defective.

• Slot PCMCIA (Express card) does not not on the Qosmio F50

  I have a new notebook from Toshiba Qosmio F50.
  I am in the express card slot allows you to display images on a CF card, but it does not work, it does not detect anything.

  Any idea? Should it be turned on at all?

  Do you use an adapter to view the photos on a CF card?
  Maybe this card will not take in charge the laptop.

  And do you see anything in the Device Manager?

  What happened when you use the CF card with a USB card reader? Similarly?

• PC card slot does not have 32-bit cardbus PC card

  Hey,.

  My pc card slot does not recognize my pc card. It is a 32 - bit cardbus pc card card and the card slot supports 32-bit cards, so it must work! I downloaded the new drivers, but it still does not work. Anyone know what to do now?

  Thank you very much

  Symen

  I think it would be very interesting to know what laptop you have exactly and if PC card really supports the 32-bit cards?  :|

  Anyway. some BIOS on different laptops offer option and unique settings for the PC card slot. Have you checked the BIOS?

  Do this!

• High capacity SD card does not work in the card slot

  I have problems using a a MicroSD card of 200 GB in my Macbook Air 13 inch card reader.

  SanDisk Ultra 200 GB MicroSDCX UHS - I card

  MacBook Air 13 inch MID 2012

  Yosemite OSX 10.10.5

  I have had this 200 GB card for a week and been using it with my Nifty mini-convoyeur. Previously I'd been using a memory card Micro SD of 64GC since mid-2012 without any problems so far.

  Since I use this 200 GB card a week ago she continually disassembles, becomes corrupted and unreadable, not mountable and lift all kinds of errors when I try to copy the data or even make a new folder. I have used about 20 times utility disc up, check, repair, and operate. I had re - format 6 times now and I've tried all the different formats and same partitioning it but still questions. Ive tried to identify the problem as follows.

  (1) I thought the card was defective at first, however I only get these questions when I put the SD card micro of 200 GB into a USB card reader and connect it via the USB port.

  (2) I thought that the OWL mini-convoyeur may be defective, but the problems do not occur with my 64 GB SD micro card.

  (3) as the problems occur even when I put the 200 GB Micro SD in a Standard SD adapter (in fact I've tried 3 different adapters just to be sure) and put it in the slot of the card. 64 GB card works fine, but the 200 GB card still has questions.

  So the only conclusion I can come to is that there are problems with the Macbook Air with cards 13 inches high capacity...

  The only question now, it's just my machine or all the SD integrated card readers? I don't know anyone who has another person to check if...

  Any suggestions, or an overview?

  I understand this card capacity of 200 GB is quite new, and I was not able to find someone with problems online. I may be the first, or it's just my computer/card reader that is faulty?

  Thank you, Chris.

  So I'm at a point where I can assure you:

  200GB SD card works fine via USB hub/MiniSD adapter. I can mount/dismount and copy to the card without any problems. 200GB SD Card will be mounted with the internal SD card slot, but try to copy to card gives me the following error:

  "The operation cannot be completed because an unexpected error occurred (error code - 50)."

  Using a smaller card gives me no problems at all.

  Ive also updated to El Capitan 10.11.2 (15 c 50).

• The z570 has not a regular Express card slot (only a mini one)?

  The z570 has not a regular Express card slot (only a mini one)?

  Hi KiteEye and welcome to the community,

  It doesn't have an Express card slot.

  The small slot located is a memory card reader.

  Dave

• my memory card for my digital camera does not work when I put it in the memory card slot

  I use vista and a emachine El 1200-07w. It worked last week I just stuck the memory card and a menu pops up saying what are the options I could do (for example, open the folder, etc.) now, when I put the memory card in nothing happens, but if the memory card is in when the computer is turned on, then he will say new hardware detected but it can't find a driver for it. Why is it does not work now, but was last week and how the hell can solve this problem. I have no software for my digital camera, I always just went out the memory card it stuck in the memory card slot and it was very good. It's just a less expensive memory card (Lexar) I have a 2 GB and 128 MB and will no longer work. Thanks for any help!

  Hi, I hope you can follow this. Remove the storage card from the computer, then go to control panel
  then
  Device Manager
  Expand portable devices
  the type of memory card slots should be listed if your type is a yellow triangle in it,
  Right-click on it and choose uninstall.
  It should reinstall it automatically or when you put the memory card in the slot.
  This type of fault is often caused by not using material on the taskbar does not safely remove request.

• Slot for memory card does not support SDHC memory cards.

  Dear friends,

  I have a Windows XP Pavilion dv4000 laptop from 2005 with a memory card slot that does not support current SDHC memory cards.  Is there an updated driver for this niche that I need to view these maps?

  Greetings to all from

  John P. Owens

  Dear BH,

  Who did it!   I am running with the memory cards SDHC now.  Thank you 1 million.

  Kind regards

  Jack Owens

• can not use the card slots to post my camera photos gallery of windows crashes

  No, I have not found solution. on my pc-card slots will not work cause the pictures of my camera fall during validation on windows Gallery?

  No, I have not found solution. on my pc-card slots will not work cause the pictures of my camera fall during validation on windows Gallery?

  ======================================
  Just a guess... but if the photos are originally Photo
  Gallery crashing... you can shot in RAW format
  format. For example... Nikon RAW files have a. NAVE
  extension and Canon RAW files have a. CR2
  extension. If this is the case, install the
  After the codec pack could solve the problem if
  your camera is included:

  Expand the 'Détails' section to see supported devices.

  Microsoft Camera Codec Pack
  http://www.Microsoft.com/download/en/details.aspx?ID=26829
  (Windows 7, Windows Vista Service Pack 2)
  This package will allow RAW supported
  camera files visible in Windows Explorer

  And...

  Maybe you can copy your pictures to a folder on
  your hard drive as follows:

  Insert the memory card into the correct location on the media
  Drive... If open windows... Close them.

  When the card is inserted... If you go to... Reach... Start /.
  Computers / devices with removable storage... is the
  player card on one or several removable disks?

  Removable (e :)) drive
  Removable disk (e :))
  Removable drive (g)

  If_Yes_you can download photos from there. Left
  by clicking on the drive letter that corresponds to the memory
  card slot should display the directory of the card and you
  can copy and paste or drag and drop the photos of your choice
  in a folder on your hard drive.

  Just a select group of photos do a right-click and choose...
  Copy... then navigate to the folder you want in and
  Right-click on the folder and choose Paste.

• Dell Studio 1450 Sim Card slot does not

  I have a dell studio 1450. The sim card slot does not work after you insert an active GSM sim I can't access the net. Help, please. Thanks in advance.

  Currently, your laptop will have a wireless WLAN inside card that does not require that a GSM sim card.

  In order to make the use of the GSM sim card, you need to replace the internal WIFI card with an internal WWAN card...

  Here's how...

  http://support.Dell.com/support/eDOCS/systems/ins1110/en/SM/MiniCard.htm#wp1189718

  It will be important to make the right card for your machine. You need to know what is compatible from Dell. If you don't like the price of Dell, you can take a chance on eBay...

• How to show only images that do not have a card slot affected

  I just upgraded to PSE 11.  So far so good.  I am running Windows 7 64-bit, SP1.

  I would like to know how to find all my photos that do not have a card slot assigned to them.

  Is there a way to do this?  It can be built in, but so far I was not able to understand.

  Thank you.

  Title of the message was edited by: Brett N

  Hello

  I think that if you select the view of the places , the pictures shown are those you have already placed. If you then click Add locations (downstairs) film in the upper part shows the images that have not been placed.

  If you then place one of these images, a small icon appears in the film strip until you then close this window (click done).

  Hope that helps

  Brian

• Attempt to analysis of images from a memory card. my computer has a memory card slot and a while, it will sometimes scan I get "scanner not found." What should do?

  Attempt to analysis of Images from a memory card.  My computer has a memory card slot, but I get Message no detected scan.  Shortly it will scan even if I get this message but then I can't find the images.  Where will the images when you scan Windows Internet Explorer?

  Attempt to analysis of Images from a memory card.  My computer has a memory card slot, but I get Message no detected scan.  Shortly it will scan even if I get this message but then I can't find the images.  Where will the images when you scan Windows Internet Explorer?

  Please specify exactly what you're trying to do. What you say makes no sense. To scan an image, you need a scanner. A scanner is a bit like a camera. You put a piece of paper in the scanner and it 'take a picture' of it and save the image. This process is called "scanning".

  If you cannot scan an image from a memory card.