5th generation iPod touch does not appear on my computer it just opens itunes

Similar Questions

• my ipod touch does not appear in itunes (windows). Everything has been updated and rebooted.

  I'm extremely frustrated that I can't get my ipod touch to show up in itunes12. I've updated the itunes software on my PC. I have to update the software on the ipod touch. I tried 4 cables different (all Apple) and rebooted several times. Out of my mind. I use the ipod for work all the time and can not transfer of important music to the ipod!

  Try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Universal Serial Bus Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  Or try the iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  TT2

• 5th generation, iPod touch will not connect to Apple ID server.

  a message appears when trying to connect to iCloud that says unable to connect to server Apple ID check error

  Could be a problem for Apple. But you can try:

  -Can log on another device?

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Power off, then back on your router

  . - Reset network settings: settings > General > reset > reset network settings

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

• iPod touch does not present as associated device

  My iPod 5th generation touch does not appear on my list of device associated with my Apple account.  How I "associate"?

  Just where are you looking?

  You use the same ID and the device uses one of these characteristics?

  On the devices associated with

  When you use some features of the iTunes Store on your iPhone, iPad, iPod touch, or computer, your computer or iOS device is automatically associated to your Apple ID in iTunes account settings. These features include:

  • Turn on iCloud music library.
  • Download after purchase , you did in the iTunes Store, App Store, iBooks Store or Mac App Store.
  • Enabling automatic downloads.
  • Turn on sharing of family.
  • Subscribe to iTunes game.

  View and delete devices in iTunes - Apple Support

• Transparent line on which vertical on the 5th generation, Ipod Touch

  I got a second hand 5th generation iPod touch which all worked fine other than to have a line described in the title above. This line is blocking the letters on the keyboard and is quite frustrating if anyone has advice please share!

  I suspect a problem with the hardware as a bad screen but you can try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• iPod Touch does not have 6th gen.

  So my 6th generation iPod Touch decided to completely brick itself. It is quite insensitive, appearing by all measures to be extinct. It does not have to be plugged into a charger or computer. I tested with several threads to make sure that's not the problem. All the buttons do nothing, no matter how long they are kept pressed. I seem unable to force it to turn it on (or stop, if it's just particularly good at playing dead) and can't seem to do anything but keep papers.

  I did not anything out of the ordinary to cause damage, so I don't see why it would be brick suddenly like that. I am running the latest iOS with the updates so far. As far as I can tell, it's just death. Everyone knows a similar problem or have any ideas on how to fix it?

  I'll try to get to an Apple store this week, but I guess they'll just replace. This isn't really a solution to the problem here. The problem is... it's the second time that this happens. When I bought my 6th Gen, he bricked within 72 hours. It is a common thing with the Gen 6 iPods or am I cursed? I really do not have to replace my iPod every 3 months.

  Helio83 wrote:

  I'll try to get to an Apple store this week, but I guess they'll just replace. This isn't really a solution to the problem here. The problem is... it's the second time that this happens. When I bought my 6th Gen, he bricked within 72 hours. It is a common thing with the Gen 6 iPods or am I cursed? I really do not have to replace my iPod every 3 months.

  The Apple Store is a good idea. You have restored iPod from a backup of the previous iPod? See if any of these articles get the operation of the iPod. If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Supportand If your iPad, iPhone or iPod touch does not respond or won't turn on - Apple Support

  -AJ

• New Ipod Touch does not illuminate

  Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?

  Try the following steps:

  1. Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
  2. If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
  3. If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
  4. Be sure to contact the Apple support if you need more help.

  Good luck!

• My 1st generation iPod touch can not save on my iMac El Capitan but can to my MacBook Snow Leopard ' 08. Why the iMac think that the backup is corrupt?

  Of course, I'm using my iMac El Capitan, but when I bought the music today and went to add to my iPod touch iTunes ended up freezing. Long story short, I could delete the files from the iPod but can not add one; Adding a single song led to suspended iTunes and the cancellation of the synchronization via the iPod of course makes no difference.

  After going through all the rigamarole any attempt to delete all backups for iPod, both through preferences and in/Library/Application Support / MobileSync / Backup, I always had the same problem. I can't add music on my iPod via the iMac, nor can I save it there. Yes, I rebooted.

  And so, after many tears, I pulled out my MacBook ' 08, who narrowly missed the cut for El Capitan and so still has Snow Leopard. And now my iPod backed up very well! (I cursed myself for not to copy previous backup before it was replaced, but hey.) They are all under the same Apple ID, so at this point, I'm simply redownloading all of my new purchases on the ol' MacBook ' so I can add it to the iPod... but how long this will be a viable solution? (I realize using products Apple since 2008 is an affront, but you've got to do what you do I do, and I don't currently have pocket for 32 GB change.)

  So the question. Is there an incompatibility of software between my 1st generation iPod touch (3.1.3) and my iMac (El Capitan with iTunes 12.3.2.35 10.11.3)? Is there really a degree of corruption here than Snow Leopard with iTunes 10.6.8 11.4 (18) does not recognize?

  TL; Dr: I can do my iPod touch backup of my iMac?

  (My apologies for what is the format, I still haven't managed to brevity, and these a few hours researching in it made me frustrated).

  Edit: I forgot to mention that I tried to copy on the backup freshly prepared from the MacBook on the iMac and received the same exact error message.

  See:

  Sync 1 G iPod touch with iTunes 12.3

• iOS on the 5th generation ipod touch?

  iOS 9.3.2 is officially the last version of the iOS which runs on a 5th generation iPod Touch? I was wondering why there has been updates no more and decided to ask

  You should be able to upgrade to iOS 9.3.5.

  Have you tried to connect your iPod Touch to your computer the latest version of iTunes (to 12.4.3) and update your iPod Touch like that?

• I can't get my Ipod Nano to sync with windows 10. When I run diagnostic Ipod nano does not appear as an option?

  I recently got a new laptop with Windows 10. I can't my Ipod Nano to sync. When I run the diagnostic the Ipod Nano does not appear as a device

  Try the help on this discussion > my ipod sync now after installing Windows 10

• iPod touch does not recognize my password 9.2.1 apple ios

  My Ipod Touch does not recognize my password for Apple.  IOS 9.2.1

  Password for what?

  What is the exact wording of any messages?

• iPod touch does not work.

  I have an iPod touch that I got from a friend X years. So I don't know who it is. From last night, it will not work in my car. I can't turn it on, and my Mac isn't even recognize it either.
  My most recent iPod touch does not right in my car. So I gave to my current girlfriend. How can I fix these problems?

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

  What to do when not working do not directly in the car?

  Have you contacted the manufacturer of car system? Sometimes they are not compatible with the new version of the iOS.

• Your 'help' rarely works. How can I click on something that does not appear on my computer?

  Many problems of migration from Windows Live Mail. I imported my contacts, but they are scrambled. The columns contain erroneous information. Is it possible to decode them? Your 'help' often tells me to click on something that does not appear on my computer. Very frustrating to go through aid procedures which lead to a white wall.

  As for aid referring to things you do not have...

  http://chrisramsden.vfast.co.UK/13_Menus_in_Thunderbird.html

• Toshiba Canvio Basics HARD drive does not appear in my computer

  Hello

  I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc

  Please help and Windows 7 or windows 8.1 PC do the same thing.

  Hello

  I found the description of the product of this external HARD disk:

  Product features:
  • USB 3.0 - powered portable add-on storage.
  • Voltage of bus capable USB, no need for AC adapter.
  • Easy to use with no software to install.
  • Adapts to large digital files with spacious storage capacity.
  • Protect your drive (internal shock sensor and ramp loading technology).

  Specifications
  • Capacity: 1.0 TB
  • Interface: USB 3.0
  • Transfer rate: up to 5 Gb/s
  • Speed: 5 400 rpm
  • Average access time: 12ms
  • Cache buffer: 8 MB

  It is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
  The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
  Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable

• Drive external DRIVE does not appear in my computer

  Windows says new hardware detected... your new hardware is installed, but it does not appear in my computer. No drive letter is assigned.

  Can anyone help?

  Do you use an external USB HDD? Does a job on another computer?