6.3.1 Hyperion enterprise data extraction error

Similar Questions

• Hyperion Enterprise Reporting error

  I am new to Hyperion Enterprise and Hyperion Enterprise Reporting. While exploring the part considered in Hyperion Enterprise reporting"I had unintentionally tweaks changed which resulted in the time dimension by showing POV * error *. Rest dimensions appear correctly, but this resulted in reports display nothing. Can someone guide me on how to cancel it. Thanks in advance for your help.

  Hi Jay,.

  This is essentially due to an appropriate frequency is not defined in the POV.

  And easy way would be to connect to the company and click on reports module and open the report and check if you are able to view the data.
  If so take note of the POV and make a note of the POV should be made in the corporate reporting module, the reason why when you open the POV in the module of company reports it would open the POV in the same way that it opens in the Hyperion Enterprise reporting.

  Note and write it down exactly as it appears in the enterprise > POV reports module.

  Hope this helps,

  Thank you
  Charles Babu J

• IKM SQL for Hyperion Essbase (data) error

  Hello
  I've created an interface between Oracle DB and Essbase 11.1.2.
  I used Oracle DB as transit zone. I used IKM SQL for Hyperion Essbase (data) as a selector IKM.
  But I got an error as below in step ("Load Data on Essbase"); Can you help me? Thank you...
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (most recent call changed):
  File "< string >", line 21, < module >
  
  
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
  
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
  
  at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
  
  at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
  
  at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
  
  at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
  
  at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
  
  at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:919)
  
  at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1261)
  
  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1419)
  
  at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1668)
  
  at oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:432)
  
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  
  at java.lang.reflect.Method.invoke(Method.java:597)
  
  
  java.sql.SQLSyntaxErrorException: java.sql.SQLSyntaxErrorException: ORA-00936: lack of expression
  
  
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2457)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
  at java.lang.Thread.run(Thread.java:662)

  Hello

  finished column mapping, or be owned by mapping active of course active for each column.

• Blue screen and CORE-DATA-INPAGE-ERROR Message

  The blue screen and the CORE-DATA-INPAGE-ERROR Message appeared during extract some files, 2 consecuentlly. It has happened too, but not that often and during other processes. What should I do? The OS is Vista Home Premium.

  Indeed, I am here!

  Thank you for fixing links.

  The attached file of the DMP is to bug checking KMODE_EXCEPTION_NOT_HANDLED (1e) .

  This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  8th error checking, {c0000005, 9eaa4efc, e551bae0, 0}

  0: kd > 9eaa4efc ln
  (9eaa4eb2) win32k! PFEOBJ::vFreepfdg + 0x4a |  (9eaa4f65) win32k! MultiUserGreTrackRemoveEngResource

  The exception is produced in win32k! PFEOBJ::vFreepfdg + 0x4a.

  0: kd > k
  ChildEBP RetAddr
  e551b6a0 84071908 nt! KeBugCheckEx + 0x1e
  e551ba70 8409584 has nt! KiDispatchException + 0x1a9
  e551bad8 840957fe nt! CommonDispatchException + 0x4a
  e551bafc 8401e70c nt! KiExceptionExit + 0 x 186
  e551bb64 9eb38a95 hal! KfLowerIrql + 0 x 64
  e551bb84 9eafac21 win32k! RFONTOBJ::vDeleteRFONT + 0 x 130
  e551bbbc 9eafada2 win32k! vRestartKillRFONTList + 0x7b
  e551bbf0 9eaafcd7 win32k! PFTOBJ::bUnloadWorkhorse + 0 x 115
  e551bc1c 9eaaf8d9 win32k! vCleanupPrivateFonts + 0x4d
  e551bc34 9eaac06e win32k! NtGdiCloseProcess + 0x16c
  e551bc54 9eaabbad win32k! GdiProcessCallout + 0 x 145
  e551bc70 84262 has 48 win32k! W32pProcessCallout + 0x5d
  e551bcdc 8423f47f nt! PspExitThread + 0x4a0
  e551bcf4 840fde8e nt! PsExitSpecialApc + 0 x 22
  e551bd4c 84094d 42 nt! KiDeliverApc + 0x1dc
  e551bd4c 77a95d14 nt! KiServiceExit + 0 x 56
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  04adf6dc 0x77a95d14 00000000

  Associated police crashes, likely a buffer overrun.

  ---------------------------------------------

  1. remove the font cache and then restart > C:\Windows\System32\FNTCACHE. DAT

  * I recommend that you create a system restore point before that just to be sure: Vista - START | type rstrui - create a restore point.

  2 you have avast! + Security installed Aladdin, is at the origin of the conflict.

  Remove and replace avast! and Aladdin with temporary Microsoft Security Essentials for troubleshooting purposes:

  avast! removal - http://www.avast.com/uninstall-utility

  MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall Smart Defrag as soon as possible.

  4 uninstall RealNetworks as soon as POSSIBLE, the drivers are too old - 2003.

  Kind regards

  Patrick

• Calculated in Hyperion Enterprise 6.5.1.1 account number

  Hello

  I created a new account (AB_CD) in Hyperion Enterprise 6.5.1.1.

  I applied the formula (AB_CD = #IJ_KL #EF_GH +) for Member AB_CD, check methods, saved and consolidation.

  Still, but I get 0 for the level zero members and levels parents are to be calculated correctly, when I tried to dig the data.

  Account type, that I used for the account of the creation of AB_CD is "INCOME".

  It would be very useful, if you can able to throw some light on this issue.

  
  

  Kind regards
  

  SRI

  Hello

  I solved it by myself in unlocking LevelZero members in the category and consolidated. It has worked well.

  It's just for more information of others.

  Kind regards

  Sri

• Data extract Essbase to Oracle DB using report Script

  I get an error saying that ODI can not locate my report script. My essbase is on a different server from ODI. Can I copy the script on the server of the ODI report? Is that the way to solve this problem?

  Documentation
  "Validation of the column is not executed during data extraction using report scripts. Thus, the output of a script to report columns is directly mapped to the corresponding column connected in the source model. »

  This means that the order of the columns in the report script must be in the exact order as the columns in the source Essbase model for extraction to perform successfully.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Satellite A300D-135 - BIOS - System Configuration data read error

  After starting a Satellite A300D-135 laptop computer, the following error message appears:

  
  3070M extended RAM passed
  512 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
  Fixed disk 0: TOSHIBA MK2546GSX
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  After pressing F1 the machine starts Windows, very well, but the error message is quite irritating, while it comes with a loud BEEP

  I tried the following things so far (in that particular order):
  -Load BIOS default
  -Flashed the BIOS with the latest version of the BIOS (2.80) for this type of model
  -Reinstalled windows with HARD drive format

  All the these did not work.

  I saw the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but so far I have not been able to find a working solution.

  It might me a hardware problem, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work perfectly under Windows, so this does not seem the question). Another solution that is mentioned in some forums, replace the battery. But because the phone keeps time correctly I don't think it's the case either.

  Any ideas?

  Kind regards
  GJ

  Hello

  The POST (power on self-test) BIOS checks and detects errors on the motherboard.
  I think it has something to do with the hardware on the motherboard problem.
  I doubt that you can solve this if update of the BIOS and the BIOS default settings didn't change that.

  What to say; I think that the technician of the ASP should run tests to check what's wrong or what cause this I think it is question of s mobo.

• Satellte M30: BSOD - KERNEL DATA INPAGE ERROR atapi.sys

  Hello

  I really hope, really, that someone can help me. I'm no computer Wizard, so if you can help please give me simple instructions. My problem is that often my satellite M30 freezes and blue page happens to give me a warning.

  Top of the page is KERNEL-DATA-INPAGE-ERROR, then goes on to say disable Options memory BIOS such as cache or shading, atapi.sys says below.

  So can someone please help.

  Thank you

  Hello

  Because you are not a computer expert ;) I'll try to write as simply.
  It looks more like a hardware problem as a problem of software!

  But to be 100% sure, you should recover the laptop with the Toshiba Recovery CD supplied.
  This CD will be programmed the laptop back to the factory setting and usually the laptop should work properly after the recovery of the new!

  If you the BSOD will appear again the chances are high that memory, HARD drives and the motherboard is malfunctioning.

  But because you are a beginner, I would not recommend trying to solve this problem yourself.
  In this case, you must contact the ASP in your country!

  Good luck

• Of extraction error when I install of OS recovery CD

  Can someone help me, I have the recovery disc for the satellite series, when I use the first recovery disc, happened to 49%, then an error msg appears "extraction error" has anyone see this before and if yes is there a way out of it, or you can get a new drive of toshiba.

  Hello delmotte

  I saw errors of recovery at the beginning of the recovery procedure, but not at the end of the CD1. Can you please tell us which laptop model you have? Have you noticed this problem before?

• Equium A300D - 13 X - Configration system data read error

  Hello

  I have a problem with my Equium A300D - 13 X laptop, everytime I turn on my laptop it starts and loads the initial startup screen as usual, Toshiba once asked that loud "BEEP" comes from my laptop, and lists the following information:

  Phoenix TrustredCore (tm) NB
  Copyright 1985-2006 Phoenix Technologies Ltd.
  All rights reserved

  Herring of the ITA (DDR2 + T/RS690M/SB600)
  CPU speed = 2000 MHz

  639K system spent RAM
  1918M extended RAM passed
  1024 KB of L2 Cache
  Occult system BIOS
  Video BIOS with a shadow
  ATAPI CD-ROM: MAST * ADVD-RAM UJ-850 S
  Fixed disk 0: WDC W2500BEVT-00SCSTO
  Fixed disk 1: Hitachi HTS542520K9SA00
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  I replaced the hard drive and flashed the BIOS settings as advised by Toshiba Helpline but the problem persists.

  Help, please! because the "BEEP" is now getting on my nerves!

  See you soon

  Hi andrew_net82,

  It seems that the BIOS has detected an error with a certain part of material...

  Before doing something I recommend you load the default settings in the BIOS. If you are in the BIOS Setup, press the F9 key.

  If it doesn t work you need for professional assistance from an authorized service I think. Guys need to check which part of the material is defective and must be replaced.
  List of the ASP, you can find on the official website of Toshiba.

• Data length error! Helps the release of Keyence micrometer

  I am connected to a micrometer of LS7600 Keyence, and I am able to send commands to the micrometer, as well as receive structred outputes.  For example:

  Command: M0, 1

  Return: ER, M0, 20

  Soul ER error, M0 is my exit command, and 20 means DATA LENGTH ERROR.

  I use a very basic VISA program that connects to the Keyence via my Serial Port.

  So when the micrometer Keyence attempts to send the data I requested, it apparently can't do because it encounters a data length error.  I know it's a problem with my labview software because I can output these values successfully using a Hyperterminal connection.

  The data SHOULD go back which looks like this: M0 + 25.2531

  It's just 12 bits?  Can anyone think why labview does not accept this string?

  Check the display format of the indicator, that you look at the number.  It by default 6 significant digits, is exactly what you say.

  The integer is in the orange wire, just your indicator is not set to show them all to you.

• Message "General Extraction error location ARE 1"

  I have the means to go to the Bowling game and was able to play until a few days ago, I got the error "General Extraction location ARE 1" and I can't get in the game.  I looked online to see what this error is and he can't find where.  I contacted Pogo, where I had the game and Oberon Media, the creators of the game and can help find a solution to my problem.  The only thing I've done to my computer, it's do all the updates of Java, windows and McAfee (my virus program).  I have windows XP.  Any help would be appreciated.

  Hi Jack,
  Thanks a lot for your answer.  I deleted all records of three in the C drive and not seen any sign of the game in my computer so I re-installed.  The re - install put the shortcut on my desktop, so I tried to go in there and got the same 'general Extraction error location ES 1' and the game will not load.  Went through the start menu and tried and received the same message.  I returned to my computer > lecteurC > program files > oberon media > way to go Bowling and open this folder.  The record was filled of records and other icons, so I started to search in folders.  There is an icon that says 'Way to go Bowling Application Electronic Arts' and when I clicked on that, load the game and I was able to play the game.  Because I didn't get into the game this way, whenever I play, I went back to this icon and click right and found the 'send to the office', so I did.  When I click on it on my desk, the game loads and I can play.  I deleted the shortcut that was created during installation and use the one I sent to the desktop and can play now.  Don't know what past or why, I'm so happy I can play this game.

  Thank you

  Vickie1712

• General extraction error location es1

  I just got a new laptop.  I played on IWin on my old laptop.  When I tried to download games on the new laptop, I get this error message.   General extraction error location es1

  Hi biehlel,
  
  (a) what operating system do you have?
   
  (b) you try to download the game via Internet Explorer? Or install the game from the CD/DVD/flash drive?
  Uninstall versions of java and reinstall them.
   
  Check this link, it may help, if you are referring to the installation of the game through CD/DVD.
  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/33c530ab-07bc-4b94-8bdf-431ddbcf0c72
   
  IWin seems to be an online game.
   
   
  Post back with the State.
  Aziz Nadeem - Microsoft Support

• Computer laptop Gateway does not load windows Vista, reads configuration data read error: System.

  OK a friend knows me to fix his laptop. Apparently what she was experiencing major problems, so he erased the disc and tried to reinstall Win Vista from disk. Will not work. I can get to where you can choose a partition to install the operating system to, and it says: Windows cannot find a system volume that meets its criteria for installation. My friend says he has just tried, form disassemble the computer an audit of all the parties to try ALL the different options during installation, as well as the options for the BIOS. Any ideas people? Here are the approximate specifications, because the owner has not been able to get the computer working for awhile:
  4 GHz, 4 GB RAM computer Gateway laptop, 2006, Phoenix TrustedCore, and a string of other interesting info that appears on the first screen of the error:

  9D.03 BIOS version

  632K RAM passed system
  3966M extended RAM passed
  1024 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: Optiarc DVD RW AD-7563 has
  Fixed disk 0: WDC WD2500BEVS-26VATO
  Initialized the mouse
  Updated System Configuration data
  ERROR
  System Configuration data read error.

  I'm not very tech savy and I'm not the owner of the PC, so I don't know all about it so go easy on me :).

  If your friend tried to reinstall Windows by using the defined gateway recovery disc (and this is the best way) and this recovery fails, the laptop has hardware problems. Disassemble laptops is a fickle business at best and while it sounds like the hardware problems started before your friend did this, it may have put the nails in the coffin of the laptop to take apart.

  At this point, you can try troubleshooting hardware or your friend can take the laptop to a competent professional (not a type of BigComputerStore/GeekSquad of the place). However, if the laptop has had hard use, your friend must remember that a cell of 4 years with major hardware problems probably won't be cost effective to repair.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot MS - MVP - Elephant Boy computers - don't panic!

• Kernel data Inpage Error... Memory dump... Please help me

  Hi my name is shoaib.

  I am facing a problem of blue screen approximately every 20-40 minutes. I run the memory test and you indicates no error. I check the RAM via the command "mdsched.exe" and she also don't say no found error. But when the blue screen appears it is said on the top of the page "kernel data Inpage Error".

  Please tell me what to do?

  Here is my file link "msinfo32".

  http://1drv.Ms/1Lu9SpH

  I have not found any "directory Minidump" in C:/windows. Please suggest me what to do. I really need your help. Thank you

  If you stopped crashing run a trace of windows performance when you encounter the problem

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem