6 ESX access no VM network to vCloud

Hello

I am a student in the Netherlands. I study and learn more about ESX, VDI, RDS etc. we use vCloud to provide a test environment to install these applications and hypervisors.

Because I have no homelab I use vCloud to learn more about VDI. The process that I took was install ESX in a paralytic with Open-E DSS as iSCSI storage. ESX installation is complete as it should be and the Windows Server 2012 VM in the TIME that I was trying to push vCenter as a virtual machine on an ESX host. Is installed as it should and I got an ip address + port number to access the page. Unfortunately I couldn't access the vCenter page nor could I ping the virtual machine. I can access my ESX through enforcement of a vSphere.

What I tried:

-Install multiple NICS on the virtual machine. I used different network adapters E1000 or VMXNET3 but that did not work.

-Install a Windows 8 VM to see if it was a problem of vCenter vCloud 6. Neither the VM W8 got access to the network.

I think it's a restriction on vCloud network administrator does not yet know. It's the first year, they used vCloud as a working environment for all students.

Does one of you, smart people have a suggestion on what goes wrong here?

ESXi nested on Air - VMware vCloud Air Blog - Blogs VMware vCloud

This could help you understand a little better.

Tags: VMware

Similar Questions

  • From Firefox blocks all access to the network

    When I start Firefox (41.0.1), all access to the network is completely blocked. Before you start the FF, I can access the Internet (with Chrome or IE), other computers, but as soon as I launch Firefox, all access to the network (including the connection to other computers) is blocked. In addition, my computer will turn off more.

    As far as I KNOW, I have not installed lately extensions or add-ins.

    Thank you for your resolution. Today, when I mentioned to work, I was told to update Firefox. This seems to do the trick (so far, fingers crossed!).

    (https://support.mozilla.org/en-US/kb/refresh-firefox-reset-add-ons-and-settings) so very probably an extension is causing harm.

    When this isn't ' t the resolution, I will surely return to your resolutions.

  • Password for access TL96 on network

    Hi, when I browse my TV on my LAN IP address I'm invited for a user name and password. What are the default settings?

    Thank you

    Hello

    If this username and default password is required, you should be able to find it in the user manual.
    But I m wondering why go you to the TV during the INVESTIGATION period?

    You can connect the TV to the home network and the support of menu TV Toshiba some options for access to the network. In Media Player, you can find the USB media player and the Player multimedia network. To access the video and picutres you must use the 2nd option (network drive)

  • Password to access the wireless network

    I am trying to set up my iPhone to my home wireless network and I don't remember the password to access the wireless network and it drives me crazy! I'm going to network and sharing Center, then the properties of the wireless network. I click on the security is WPA-personal security type, is type of encryption: TKIP the box to show the network security key characters will not let me click on it. Anyone have an idea how I can access my own password?

    Thanks a lot, a lot in advance! Lisa

    Keep passwords secure - Microsoft on passwords strategy
    http://support.Microsoft.com/kb/189126

    Contact support on the router's Web site people. Or reset the default router and start over.

  • Adapter LAN question, "no access to the network.

    Original title: LAN adapter issue

    Hi all, when connecting my laptop to a switch of the LED on the switch is green which means connected. The IP address on the laptop is entered manually, but when will the cmd and issue ipconfig it shows "media disconnected" and the network adapter in the Control Panel indicates "no access to the network. It also indicates that "this device is working propoerly! Please advice

    Hello

    What is the number and the model of the computer?

    Remember to make changes to the computer before the show?

    Thanks for posting in Microsoft Communities.  The problem description, I understand that you can not connect to the Internet.  Correct me I misunderstood the question

    Follow these steps:

    Method 1: Follow these steps:
    How to troubleshoot possible causes of Internet connection problems in Windows XP:
    http://support.microsoft.com/kb/314095

     

    Method 2: Follow these steps:


    Step 1:
    renew DHCP Dynamic Host Configuration Protocol)
    a. click Start, click run, type cmd and click OK.
    b. in the command prompt, type ipconfig / renew
    c. Close command prompt.
    d. check the result.

     

    Step 2: Try to obtain an IP address automatically
    a. open Internet Explorer, go to Tools, click on Internet Options, connections, LAN settings.

    b. uncheck all boxes except automatically detect connection settings
    c. click OK to apply the changes.
    d. check if the problem persists.

     

    Method 3: If the methods above do not help, check if the wireless card is very well and try to update the drivers on the manufacturer's Web site.

    a. click Start and right-click my computer.
    b. Select Properties and then click the hardware tab.
    c. click on Device Manager and expand network adapters in the list.
    d. right click on the adapter, then click Properties.
    e. click the driver tab and click Update the driver.

    Please follow the steps and let us know if this helped.  If the problem persists, answer and we will be happy to help you.

  • I'm trying to access a wireless network with the password provided for me. I get the following error message

    I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

    I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

    In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

    Hello

    I suggest you to visit these links and check if it helps:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

    It will be useful.

  • Error 1606.Could access location %APPDATA%\ network When uninstalling and installing Java for vista

    I get "Error 1606.Could access location %APPDATA%\ network." "When I try unistalling Java (TM) 6 Update 5 and Java (TM) 6 Update 20 and when I try to download the latest version of java (25) Ive tried a lot to get rid of the problem, but nothing I tried seemed to help."

    Windows Vista 64-bit.

    Have you tried:

    1. http://support.Microsoft.com/kb/2258121
    2. http://support.Microsoft.com/kb/886549
    3. Create a new administrator account and try to install using this account.
  • Loss of connection with my router, shows only limited access and my network showed that unidentified

    Original title: unidentified network, missing the default gateway

    Hello

    So one day out of the blue I lost connection with my router. I was able to reconnect but this time around I had only limited access and my network showed non-identified. I tried to connect to a different wireless network, same thing. When I run ipconfig, I'm missing a value for the default gateway.

    I tried to:

    -Reinstall the drivers for the adapter

    -update the drivers

    -Reset my router

    -Gateway ipv4 manually of entry

    -kill lan via Device Manager drivers

    -scream at the computer

    I have a Setup to dual boot with Linux Mint along side Windows 7. When I boot in Linux it connects to any network without problem.

    Some help would be appreciated.

    Plug

    Windows 7 Ultlimate

    I7-4700MQ @2.4

    GTX 765M 2 GB

    8 GB RAM

    1 TB + 240SSD

    Realtek RTL8188CE wireless

    Hello Alex,.

    Thank you for your response.

    I appreciate your time.

    I suggest you to uninstall the network driver wireless and reinstall in compatibility mode.

    To uninstall the driver, follow these steps:

    a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

    b. Click to expand network adapters, right-click on the map and click Uninstall.

    c. restart the computer.

    Now you can Download driver from this link wireless.
    Reference:
    http://downloads.Eurocom.com/support/drivers/zip/238/238_RealtekWLAN_W764.zip

    For reference:
    EC http://www.Eurocom.com/EC/drivers (238)

    To reinstall the driver in compatibility mode, follow these steps:

    a. right click the driver file, and then click Properties.

    b. click on the compatibility tab.

    c. click on check "run this program in compatibility mode for" and select Windows XP(Service pack 3).

    d. click apply and ok.

    Now, install the driver.

    Please keep us updated.

    Thank you

  • where can I find the security code to access my wireless network

    security key

    where can I find the security code to access my wireless network.

    Hello

    Check with the manufacturer of the router's support and most have forums and excellent documentation online.
    You should be able to access the router to set a new SSID and password if necessary.

    You must know the SSID (name of the router) and the password.

    If you do not know these you can find in the running on the WiFi system now with this
    free tool. This is not a crack, it should be run on a local computer that has access (or access)
    to your router. Sure, the information will not be there if Windows was reinstalled or information
    has been deleted otherwise.

    -FREE - WirelessKeyView recovers all the wireless network security keys/passwords (WEP/WPA) stored
    in your computer by the service 'Wireless Zero Configuration' of Windows XP and by the 'autoconfiguration WLAN service.
    service of Windows Vista. It allows you to easily save all keys to text/html/XML, or copy a single key to the
    Clipboard. (Works on XP, Vista or Windows 7).
    http://www.NirSoft.NET/utils/wireless_key.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How can I block a unknown user to access my home network on windows 7?

    I discovered an access device to my network which does not belong there. I can't access, so I can't really do anything to the extent of the see who it is. I thought it was just someone leeches off my wifi hotspot, but when I turned off wifi, they log. When I try to access this unknown, my computer tells me that, basically, the unit is not there. How can I put an end to unwanted access to my network guests? I think it would be not possible, given that the network requires a password to gain access. I did not the password to anyone except those authorized, and yet, here I have a device owned by a person named "Griff" connected to my network.

    I have already been burned by leechers unauthorized hiding behind my IP and downloading illegal or pirated content. I don't want this headache yet. How can I stop this?

    Here's my view of what has been published. Disabling the SSID broadcast will stop that casual leechers. #2 will not accomplish all that it's someone who connect to your network. #3 is a given... you need to change your password and #4 is probably your best choice, but I would like to change it, so that only the mac addresses you specify can connect to the network.

    I hope this helps.

  • "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

    Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
    I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

    When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
    I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

    Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

    When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
    1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
    2. my IP address, DNS, subnet mask etc are set to automatic.
    3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
    4.I ' installed the drivers to date of 2014 on my laptop.
    5.I did a lot of searching the web, but they do not solve my problem.

    Please help me to solve it.
    I appreciate your help.
    Thank you.

    Hello Hall,

    Please keep us updated on the status of the issue.

    I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

    Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

    http://support.Microsoft.com/kb/2779064/en-us

    Hope the helps of information.

    Please reply with the results, in order to help you solve the problem.

    Thank you

  • LATITUDE DE820 wiped out loaded XP drivers DELL &amp; SW, no access to the network

    Everyone out there - I need HELP... I bought a second hand LATITUDE DE820 with Windows 7 above and it worked fine (also WIFI). I need to load XP Prof on it (Yes...) and therefore all DELL SW disappeared (had no CD DELL) that I loaded package XP 3 Service that I plugged in Ethernet, but I also have a WLAN - but NO communication to all NETWORKS. Ping an IP address any LAN brings 'Host unreachable' IPConfig/all shows: IP of Windows host Setup...: laptop Prim. DNS: Enter Mode: Broadcast IP routing enabled: No. WINS Proxy enabled: Ethernet adapter without Bluetooth network connection: media state: media disconnected Description: peripheral physical addr Bluetooth (Personal Area Network): Mac addr. Control Panel-> network connections displays LAN at the Connecticut 1394 network adapter (properties: peripheral works properly, driver: MS 07/01/2001!) Connection status: connected but 0 packet protocols: f. Client Microsoft NW File & Printer sharing TCP - IP - trying to hit the repair-> msg "TCP/IP not enabled for this connection") Conclusion: I think that my XP drivers are too old, or not DELL problem: I have no access to the network - minimum need drivers update for access to Internet, and then upgrade to download that/those pilot on a Non-Dell PC then CD, then install on the laptop don't know DELL HW, used Service tag to find 11 drivers, drivers resp. 75 for that I think it's a driver of 'network' - but don't know what or any other suggestion? Thks for any help Peter

    Well well maybe it was because I realized that I needed to insert HTML
    to get my text with line breaks.
    But in any case the problem is solved by support group European German DELL who responded very quickly by there DELL Forum and help me great to go again. Thank you DELL-Dave S.
    Problem solved by:
    followind drivers downloaded from the CD, and then installed on D820
    WLAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=R257701&OSCODE=WW1&FILEID=2731111614&LANGUAGECODE=DE&CATEGORYID=NI.
    LAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=04VK6&OSCODE=WW1&FILEID=2731090506&LANGUAGECODE=DE&CATEGORYID=NI.
    Now using Ethernet and wireless network worked with access to the network, all the others downloaded drivers from the net.
    Viva

  • Control access to the network with ACS device

    Hi all!

    I currently have in place an Appliance, Cisco Secure ACS using Windows as main server authentication. Cisco Secure acts as a GANYMEDE server +. I have two groups defined in Cisco Secure: Netadmins and security ITD. Users of the Netadmins group need access to all switches and routers on the network. ITD security must only access async line 53 on a router 2611 for a band of a firewall and no other access to all network devices offline. How can I limit access to the Cisco Secure security ITD group to line 53 only?

    My current config on this router is:

    AAA new-model

    AAA authentication login netadmins group Ganymede + line

    connection ITDSEC authentication group Ganymede + line of AAA.

    RADIUS-server host 10.30.X.X

    RADIUS-server host 10.18.X.X

    key radius-server XXXXXXX

    line 53

    No exec

    authentication of the connection ITDSEC

    transport of entry all

    StopBits 1

    Speed 115200

    line vty 0 4

    exec-timeout 30 0

    login timeout 120 response

    login authentication netadmins

    but users in the ITD security can still access by vty and then reverse telnet to any asynchronous line on the router. In addition, security ITD always access any switch or router using telnet: what should be my setup on these devices? I do an ACS configuration?

    All other devices:

    AAA new-model

    AAA authentication login netadmins group Ganymede + line

    RADIUS-server host 10.30.X.X

    RADIUS-server host 10.18.X.X

    key radius-server XXXXXXX

    Line con 0

    password 7 141C015C5806

    login authentication netadmins

    line vty 0 4

    password 7 11020A 524310

    login authentication netadmins

    line vty 5 15

    password 7 11020A 524310

    login authentication netadmins

    Any help will be greatly appreciated.

    Hello

    In the security group, I would create a Restriction of access to IP network with an entry permit. Essentially to allow access to the single port on 2611 only.

    The AAA Client field is the name that you gave to the 2611 in the network config. Address will be * unless you want to restrict access to the ip or address. Port... never quite sure with async if the port value must be "async 53" or "line 53".

    If you look in the pass/fail for the nas-port attribute, you'll see what that T + sends to the ACS. This should help you know what to put in the NAR.

    Mounira

  • Restrict access to the network on 871 router via mac address

    Hello

    I have a Cisco 871 router and I am trying to allow only specific MAC addresses access to the network. Is there a way to specify that only specific MAC addresses are allowed to access? Any other MAC access will be denied?

    I can either have static IP or DHCP for local machines.

    Can I use this "secure DHCP IP address assignment" details found here... http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftdsiaa.html ?

    I use these...

    static Mac address table

    OR

    Security table of Mac addresses

    ... to achieve this?

    Thank you.

    You can use "mac-address-table static" If you know all the mac addresses that will be connected.

    If the router is by distributing ip addresses so you can indeed do secure IP DHCP address assignment.

    Note that you can make a 'mac access-list' switch and aplly in any vlan you want.

    Alternatively, you can do "dhcp snooping" allowing guests who got a dhcp ip addresses and are not identity theft.

    I hope it helps.

    PK

  • VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK

    I tried to set up a simple customer vpn using this document

    http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a00801e71c0.shtml

    VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK BEHIND "RA"...

    6.3 (5) PIX version

    interface ethernet0 car

    Auto interface ethernet1

    ethernet0 nameif outside security0

    nameif ethernet1 inside the security100

    activate the encrypted password of VmHKIhnF4Gs5AWk3

    VmHKIhnF4Gs5AWk3 encrypted passwd

    hostname VOIPLABPIX

    domain voicelab.com

    fixup protocol dns-length maximum 512

    fixup protocol ftp 21

    fixup protocol h323 h225 1720

    fixup protocol h323 ras 1718-1719

    fixup protocol http 80

    fixup protocol they 389

    fixup protocol rsh 514

    fixup protocol rtsp 554

    fixup protocol sip 5060

    fixup protocol sip udp 5060

    fixup protocol 2000 skinny

    fixup protocol smtp 25

    fixup protocol sqlnet 1521

    fixup protocol tftp 69

    names of

    access-list 101 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0

    access-list 101 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0

    access-list 102 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0

    access-list 102 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0

    pager lines 24

    Outside 1500 MTU

    Within 1500 MTU

    IP address outside 208.x.x.11 255.255.255.0

    IP address inside 172.10.2.2 255.255.255.0

    alarm action IP verification of information

    alarm action attack IP audit

    IP local pool voicelabpool 172.10.3.100 - 172.10.3.254

    history of PDM activate

    ARP timeout 14400

    NAT (inside) - 0 102 access list

    Route outside 0.0.0.0 0.0.0.0 208.x.x.11 1

    Route inside 172.10.1.0 255.255.255.0 172.10.2.1 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

    H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

    Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

    Timeout, uauth 0:05:00 absolute

    GANYMEDE + Protocol Ganymede + AAA-server

    AAA-server GANYMEDE + 3 max-failed-attempts

    AAA-server GANYMEDE + deadtime 10

    RADIUS Protocol RADIUS AAA server

    AAA-server RADIUS 3 max-failed-attempts

    AAA-RADIUS deadtime 10 Server

    AAA-server local LOCAL Protocol

    Enable http server

    http 172.0.0.0 255.0.0.0 inside

    http 0.0.0.0 0.0.0.0 inside

    No snmp server location

    No snmp Server contact

    SNMP-Server Community public

    No trap to activate snmp Server

    enable floodguard

    Permitted connection ipsec sysopt

    Crypto ipsec transform-set esp-aes-256 trmset1, esp-sha-hmac

    Crypto-map dynamic map2 10 set transform-set trmset1

    map map1 10 ipsec-isakmp crypto dynamic map2

    client authentication card crypto LOCAL map1

    map1 outside crypto map interface

    ISAKMP allows outside

    ISAKMP identity address

    part of pre authentication ISAKMP policy 10

    ISAKMP policy 10 encryption aes-256

    ISAKMP policy 10 sha hash

    10 2 ISAKMP policy group

    ISAKMP life duration strategy 10 86400

    vpngroup address voicelabpool pool cuclab

    vpngroup dns 204.x.x.10 Server cuclab

    vpngroup cuclab by default-field voicelab.com

    vpngroup split tunnel 101 cuclab

    vpngroup idle 1800 cuclab-time

    vpngroup password cuclab *.

    Telnet timeout 5

    SSH 208.x.x.11 255.255.255.255 outside

    SSH 0.0.0.0 0.0.0.0 outdoors

    SSH 172.10.1.2 255.255.255.255 inside

    SSH timeout 60

    Console timeout 0

    username labadmin jNEF0yoDIDCsaoVQ encrypted password privilege 2

    Terminal width 80

    Cryptochecksum:b03a349e1ac9e6022432523bbb54504b

    : end

    Try to turn on NAT - T

    PIX (config) #isakmp nat-traversal 20

    http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1

    HTH

Maybe you are looking for