Not supported RACADM commands

Similar Questions

• The system does not support the mode full screen for cmd

  Respected Sir/Madam

  I am user of Windows vista HOme basic... .also I have Windows 7 user... I'm basicllly, a student in computer engineering...

  I get an error "The system does not support the mode full screen" for cmd.exe in C++ turboo or JDK.. .then I getproblem by entering n compiled the program...

  my PC configuration is

  :-AMD 6000 + dual core Athlon 64 X processor

  Monitor:-Viewsoni

  RAM :-1Go

  Please give me a solution to problem 4 I wanted to run cmd mode full screen...

  your help will be appreciated by me highlly...

  thanking you

  Philippe

  Vista + do not support a command prompt full screen, as indicated by the message. You can manipulate the available to the command window to specify the width and height to be as big as you want, but this isn't quite the same thing...

• SRM5.1 / midsize V7000 6.4.1.4 command not supported: [discoverArrays]

  Hi all

  Production site:

  IBM midsize V7000 and FW level: 6.4.1.4

  SRM worm: VMware-srm - 5.1.1 - 1082082

  SRA: IBMSVCSRA_v2.2.0.130422

  IP: 192.168.70.50

  vCenter 5.1 U1

  Recovery site:

  IBM midsize V7000 and FW level: 6.4.1.4

  SRM worm: VMware-srm - 5.1.1 - 1082082

  SRA: IBMSVCSRA_v2.2.0.130422

  IP: 192.168.70.60

  vCenter 5.1 U1

  When I try to add the table then this error has occurred

  SRA command 'discoverArrays' failed. Invalid ID Array.

  Refer to IBM SAN Volume Controller troubleshooting

  And the SRM journal is attached.

  But I see this part of the newspaper.

  Sorry for the bad English.

  --> < name > discoverArrays < / name >

  --> < OutputFile > C:\Windows\TEMP\vmware-SYSTEM\sra-output-12-119 < / OutputFile >

  --> < StatusFile > C:\Windows\TEMP\vmware-SYSTEM\sra-status-13-225 < / StatusFile >

  --> < LogLevel > verbose < / LogLevel >

  --> < LogDirectory > vCenter Site Recovery Manager\Logs\SRAs\IBMSVC C:\ProgramData\VMware\VMware < / LogDirectory >

  --> < connection >

  --> < login id 'primary' = >

  --> < address >

  --> < code address = 'spA' > 192.168.70.50:5989 < / address >

  --> < code address = "spB" > 192.168.70.60:5989 < / address >

  --> < / book >

  --> < username > * < / username >

  --> < password > * < / password >

  --> < / connection >

  --> < / connections >

  --> < / order >

  2013 06-20 T 14: 34:33.395 + 03:00 [02020 'SysCommandWin32' verbose opID = 258F28AC-0000001 has] from process: "C:\Program VMware vCenter Site Recovery Manager\external\perl-5.14.2\bin\perl.exe" "C:/Program Files/VMware/VMware vCenter Site Recovery Manager/storage/sra/IBMSVC/command.pl.

  2013 06-20 T 14: 34:33.395 + 03:00 [02020 'SraCommand' verbose opID = 258F28AC-0000001 has] reset SRA command timeout for '300' seconds in the future

  2013 06-20 T 14: 34:33.395 + 03:00 [02020 'SraCommand' verbose opID = 258F28AC-0000001 has] listening to updates to the file 'C:\Windows\TEMP\vmware-SYSTEM\sra-status-13-225 '.

  2013 06-20 T 14: 34:33.395 + 03:00 [02020 verbose "PropertyProvider" opID = 258F28AC-0000001 has] ASSIGN RecordOp: info.progress, dr.storage.StorageManager.createArrayManager1

  2013 06-20 T 14: 34:33.441 + 03:00 [02444 'DrTask' verbose opID = 258F28AC-0000001 has] created task VC 'com.vmware.vcDr.dr.storage.StorageManager.createArrayManager:task - 3901'

  2013 06-20 T 14: 34:34.065 + 03:00 [01496 info 'SraCommand' opID = 258F28AC-0000001 has] stdout of discoverArrays:

  -> discoverArrays

  -> By Haz 20 14:34:33.909: [Info] the execution Module [constant] Inatall path: [C:\Program VMware vCenter Site Recovery Manager\storage\sra\IBMSVC\]

  -> By Haz 20 14:34:33.909: name of SRA for the [constant] runtime [Info]: [IBM System Storage SAN Volume Controller adapter for VMware vCenter Site Recovery Manager] uuid: version [38295F72-F7D0-4A0F-B8D4-FF9821AB2675]: [2.2.0.130422]

  -> By Haz 20 14:34:34.19: file commandName for the runtime [SRARunner] [info]: [discoverArrays]

  -> By Haz 20 14:34:34.19: runtime [SRARunner] logLevel [verbose]: [comments]

  -> By Haz 20 14:34:34.34: Module enforcement [verbose] [SRARunner] output file: [C:\Windows\TEMP\vmware-SYSTEM\sra-output-12-119]

  --> 14:34:34.34 by Haz 20: [fatal] runtime [SRARunner] command not supported: [discoverArrays]

  ->

  2013 06-20 T 14: 34:34.065 + 03:00 [01496 error 'SraCommand' opID = 258F28AC-0000001 has] stderr of discoverArrays:

  -> com.ibm.cstl.hsg.sra.svc.SRAException: command unsupported: [discoverArrays]

  -> to the com.ibm.cstl.hsg.sra.svc.SRARunner.execute(SRARunner.java:100)

  -> to the com.ibm.cstl.hsg.sra.svc.SRARunner.main(SRARunner.java:173)

  ->

  2013 06-20 T 14: 34:34.065 + 03:00 [01496 "SraCommand" verbose opID = 258F28AC-0000001 has] Stopped listening to updates of file 'C:\Windows\TEMP\vmware-SYSTEM\sra-status-13-225 '.

  2013 06-20 T 14: 34:34.065 + 03:00 [01496 "SraCommand" verbose opID = 258F28AC-0000001 has] cancelling SRA command timeout

  2013 06-20 T 14: 34:34.065 + 03:00 [01496 info 'SraCommand' opID = 258F28AC-0000001 has] discoverArrays came out with exit code 0

  2013 06-20 T 14: 34:34.065 + 03:00 [01496 "SraCommand" verbose opID = 258F28AC-0000001 has] discoverArrays responded with:

  --> <? XML version = "1.0" encoding = "UTF-8"? >

  "--> < response xmlns ="http://www.vmware.com/srm/sra/v2">."

  --> < error code = "4" / >

  --> < / answer >

  I solved this problem.

  The problem was MRS. Server intalled on the regional settings of Windows Server 2008 R2.

  My locale of the server was Turkish, when I install MRS I changed to English and installed.

  Finally, I reinstall Windows Server 2008 R2 full English for the United States settings after installed SRM.

  It has been worked.

• T450s: Hosted network feature not supported?

  I have a ThinkPad T450s bought in Dec 2015 with Windows 10 Pro. It has the Intel AC 7265 wireless card. I am trying to use the hosted network feature Windows to use the laptop as a hotspot for other devices, but I can't make it work.

  When I open an administrator command prompt and run "netsh wlan show drivers", the parameter ' hosted network supported:' has the value 'no '.

  I tried updating the wireless network card driver via the tool companion of Lenovo, via the Intel driver update utility and Windows via the Device Manager. The wireless driver has been updated to version 18.330.1 dated dated 05-01-2016. Then, I rebooted the machine but still no improvement. The characteristic hosted network shows as not supported. I also tried showing the devices hidden in Device Manager but under network adapters, there is no virtual card listed Microsoft hosted network.

  Is this a driver problem? Anyone with a broadcast network animated T450s as being taken in charge?

  Thank you

  Well, I found a solution on the Intel community forum: https://communities.intel.com/message/327193. A couple of users in this thread (the one with a Lenovo X 1 carbon) suggested to use an older version of 18.11 18.12 driver. So that's what I did and it worked! Here are my actual steps:

• Star Wars Special Edition Note: This system is not supported

  I need help for the Star Wars content on my laptop special edition of Star Wars.  I had to have my hard drive is erased after it got a virus and for some reason any now when I installed the Star Wars command center it tells me "this system is not supported. What should I do to get back what I lost and how do I get the command center working again?

  Hey @JudyInCT,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with Star Wars software on your laptop. I can help you with that, but I need the model number of your laptop first. You can find the model number in this link. Once I know that I will be better able to help you.

• installed the latest updates of windows 7... now the computer does not recognize my video files avi... says "format not supported".

  I have installed the latest updates (02/27/10) and when I open sony vegas to edit some files avi... they were offline... when I tried to read with windows media player it says format not supported... before when I played these files, they would not have to synchronize audio... it never happened with my other computer with Vista... system restore solved the problem of format not supported... but so far has caused this problem? and what about the problems of synchronization? the files seem to sync when played with the hp program...

  Hi derlonewolf,
   
  Because you performed a System Restore you would not be able to determine which update problem from occurring. You will have to wait for the update to your computer to determine the update that caused the problem. The update does not necessarily cause the problem to occur again. However, you can view the history of updates to updating history.
   
  1. open the control panel (all items view), and click the Windows Update icon.
   
  2. click on the link to view update history.
   
  3. to view the details of a single Windows Update-
   
  (A) select and right-click on a Windows Update list, and then click details.
   
  (B) click on close when finished.
   
  As far as the question of timing is concerened, you can scan SFC on your computer and check if the problem persists.
  
  Steps to perform a scan SFC:
   
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
   
  2. type the following command and press ENTER:
  sfc/scannow
  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]
   
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time
   
  3. If all the files require that a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue
   
  4. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
   
  5. once the scan is finished, close the command prompt window, restart the computer and check.
   
  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833
   
  You can also make manual updates instead of automatic updates and then see what are updates will be installed on the computer.

  See : http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  Post back with the status

   
   
  Aziz Nadeem - Microsoft Support

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• Windows ip configuration is an internal error: the request is not supported

  I cleaned up a few viruses out of a Windows XP Professional computer to a customer, and now he can't go on the internet.  When I check ipconfig, I get the following error.

  Windows IP configuration
  An internal error has occurred: the request is not supported.
  Contact Microsoft technical support for more help.
  additional information: host name of request impossible.
  So I googled some results. Have replaced the TCPIP.sys file with one from another computer, I still get the same message.  I don't have a windows XP original disk to put it into recovery mode.
  I also ran the command "netsh int ip resetlog.txt" but which did not help either.  I saw on another blog.
  The NIC is to see that there is a power cable plugged into it as well.  Help, please!
  Thank you
  Trever

  Hello Trever,

  Follow the methods and check:

  Method 1: You can refer the following Microsoft Knowledge Base article and check.

  "Error 1068" error message when you try to enable Internet connection sharing

  http://support.Microsoft.com/kb/827328

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Start and click run, then type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  For more information, see the article:

   

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Let us know if that helps.

• How to change the resolution of the screen when the "input not supported" message after reboot

  I need to change the display resolution to 1600 x 1024 after I changed my 1900 x 1200.
  the problem is,
  the "input not supported" message when I reboot the PC and does not allow me to do anything.
  He presents himself before the logon prompt.
  I restarted to fail safe with the command line with the id of the administrator and was able to change the resolution, but
  He returns to the State ("input not supported" and no prompt connection) after I restart the PC

  Mark,
  Thank you for your help,
  I tried in vain,
  I just used another monitor with a higher resolution, restore the previous resolution and swap the monitor again.

  Kind regards

  Claudio.

• Bit Trip Beat game error: input not supported

  Original title: input not supported

  What came was a floating message saying "input not supported", then so about 2 hours ago I double clicked on the game "Bit Trip Beat." so I thought well ill just alt tab and change the resolution and others, but I could not alt tab... I could hear my msn flashes... I could hear trip beat bit sounds in the game, everything except the screen worked...

  so I restarted my comp in safe mode with network connections so I could google a few answers but nothing helped me to this day...
  things I've tried are, restart in safe mode, and then change the resolution to something, I know that it can handle (did not work)... by clicking on "last known good configuration" (did not work)... ive tried rebooting with command prompt and typing a few commands that I found from google that is supposed to restore the resolution that doesn't work anymore , I also chose another option in windows boot manager "enable video low resolution (640 x 480), which also did not work."
  Ive kept googling and nothing seems to work, I'm running a windows OS vista and I'm not sure of my monitor acer... model someone at - he a clue whats up?
  What, in my view, that has happened, is that the game Bit Trip Beat made the default resolution of my something computers it can not handle... that is what happened?... because when I started, I had to force shutdown my computer and restart from there. any help would be appreciated

  Hello

   
  I suggest you to try Method 2 from the previous post and adjust graphics hardware acceleration. If it does not resolve the problem, then try to uninstall the graphics drivers and reinstall it.
  Let us know if it helps.

• WMA files. The license could not be downloaded because your browser is not supported

  "The license cannot be downloaded, because your browser is not supported for download a license, you must install Microsoft Internet Explorer 7 or later.           To install the latest version of Internet Explorer, see the Windows Update page. »

  This message comes to the top, but only for some of my wma files. There are thousands. my computer is new and up-to-date.
  The thing is that some of these files are music that I created myself, so what was there a license put on it? It's mine I admit.
  so now, I lost these files forever?
  I can't convert them to mp3 because of the license, I can not play them as wma because of the license files. WTF?
  How can I play?
  How to get a license get put on MY music anyway?

  Hello

  1. have you already set Internet Explorer as default browser?

  2. when and where exactly you get this error message?

  3. what happens when you try to update Windows Media Player?

  4. what version of Windows Media Player do you use?

  Method 1.

  Set Internet Explorer as your web browser default and check if it helps.

  Change the web browser by default

  http://Windows.Microsoft.com/en-GB/Windows7/change-your-default-Web-browser

  Method 2.

  You can reset Windows Media DRM by following this link & check if the problem persists:

  You may be unable to read content protected after your computer hardware changes

  Method 3.

  How to convert protected WMA to MP3 writing

  1 - Open your favorite CD burning software and insert the files protected by rights, you want to convert. Depending on the software, you can open the files in the pane to burn or drag and drop one in the pane. You can also rearrange the files in the pane if necessary.

  You must obtain the rights for all files that you are trying to convert. If the software cannot find the rights on your computer, it asks you to download them from Internet. In some cases, they could already be free, but in others, you will have to pay fees. Remember that the software will not burn anything until it makes contact with the digital rights on your computer.

  2 - Insert your choice (CD - R or CD - RW) disc in the CD drive. Wait for the software to recognize the CD and press the "Burn" button or the command to start the transfer of your songs. Conclusion of all other applications, including browsers, software of management of e-mail and games beforehand, as they can adversely affect the quality of the combustion process.

  When the process is complete, the software has usually ejects the disc by default. If it is not, manually eject the disc when you are prompted by the software it is finished.

  3. put the disk in the computer and open him ripping software. Go to the 'Options' menu under the 'Ripper' tab to specify the type of format (such as MP3), the file quality you want (for example, 'medium', 'right' or 'best') and the folder where songs should be torn and saved. Press the 'Rip' and have once again, no other programs open while this process is running.

  Your new MP3 files will be free of rights, you will be able to burn them to disc or use on any media player or device.

  4 - If you have opted for burning to a CD - RW, you can delete it now by opening your file Explorer, right click on the drive letter and select 'delete '.

  Refer to this article.

  Windows Media Player DRM: frequently asked questions: http://windows.microsoft.com/en-us/windows7/Windows-Media-Player-DRM-frequently-asked-questions

  I hope this helps.

• The current theme does not support Aero.

  Original title: Aero problems and taskbar changing colors.

  When I got to my laptop, I could use Aero and my Taskbar change color whenever I tried to change. I got a virus in sort of a thing that I downloaded online, and now I can't get my laptop Aero and I can't change my taskbars colors more.

  I troubleshooted it a few times, and this is what happens.

  The current theme does not support Aero

  and

  Director of Windows desktop is disabled (which is not..)

  Hi Hammyobob,

  Looks like the infection by the virus has taken its toll. The following suggestion may help you recover Aero on the computer.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Steps to follow:

  a. go to start and type regedit.exe.

  b. navigate to the registry key next:

  HKEY_CURRENT_USER

  c. If the DWM registry key is not found, right click on Windows, and then select New -> key to create the new branch and name it as DWM.

  d. in the details pane on the right, create a new DWORD (32-bit value) named UseMachineCheck, and set its value to 0.

  e. in the details pane on the right, create a new DWORD (32-bit) value namedblur, and set its value to 0.

  f. in the details pane on the right, create a new DWORD (32-bit) value namedAnimations, and set its value to 0.

  g. restart the Desktop Window Manager Session Manager in Services in Control Panel (type Services.msc in start search), or run the following commands in an command with administrator privileges prompt:

  net stop uxsms
  net start uxsms

  h. try to enable and apply Windows Aero in Windows 7. Restart the computer if necessary.

  This should be it.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Column data type not supported

  Hello

  I have Oracle 12 c installed in my system. I created an SP that returns a Table when I try to run it in SQL Developer, it gives me the correct results, but when I call it my DOTNET application it gives me the error-'datatype of the column unsupported. I'm trying to fill a dataset using a data adapter. To check I commented all the code in the procedure and returned the table using the code below.

  Declare
  rc sys_refcursor;
  Begin
         OPEN rc FOR SELECT 'Sayam' AS "Error" FROM dual;
         SYS.DBMS_SQL.RETURN_RESULT (rc, TRUE) ;
  END;
  

  But the problem was still same. This is the track of the same thing.

  Oracle.ManagedDataAccess.Client.OracleException took

  HResult =-1450

  Message = data type of column not supported

  Source = Oracle Data Provider for .NET, pilot managed

  ErrorCode =-1450

  DataSource =""

  Number =-1450

  Procedure =""

  StackTrace:

  at Oracle.ManagedDataAccess.Client.OracleParameter.PreBind (OracleConnectionImpl connImpl, ColumnDescribeInfo cachedParamMetadata, Boolean, bMetadataModified, Int32 arrayBindCount, ColumnDescribeInfo, paramMetaData, object & paramValue, Boolean isEFSelectStatement)

  at OracleInternal.ServiceObjects.OracleCommandImpl.InitializeParamInfo (ICollection paramColl, OracleConnectionImpl connectionImpl, ColumnDescribeInfo cachedParamMetadata [], Boolean & bMetadataModified, isEFSelectStatement Boolean, MarshalBindParameterValueHelper & marshalBindValuesHelper)

  to OracleInternal.ServiceObjects.OracleCommandImpl.ProcessParameters (OracleParameterCollection paramColl, OracleConnectionImpl connectionImpl, ColumnDescribeInfo cachedParamMetadata [], Boolean, bBindMetadataModified, isEFSelectStatement Boolean, MarshalBindParameterValueHelper & marshalBindValuesHelper, Boolean & bAllInputBinds)

  at OracleInternal.ServiceObjects.OracleCommandImpl.ExecuteReader (String commandText, OracleParameterCollection, CommandType commandType, OracleConnectionImpl connectionImpl, OracleDataReaderImpl paramColl & rdrImpl, longFetchSize of Int32, Int64 clientInitialLOBFS, OracleDependencyImpl orclDependencyImpl, scnForExecution of Int64 [], Int64 [] scnFromExecution, OracleParameterCollection, internalInitialLOBFS, OracleException & exceptionForArrayBindDML, Boolean isDescribeOnly, Boolean isFromEF, Boolean bBindParamPresent, Int64 & bindByPositionParamColl)

  at Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader (Boolean requery, fillRequest Boolean, CommandBehavior behavior)

  to Oracle.ManagedDataAccess.Client.OracleDataAdapter.Fill (DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, command IDbCommand, CommandBehavior behavior)

  at System.Data.Common.DbDataAdapter.Fill (DataSet dataSet)

  at DataAccessLayer.DataAccessService.OracleGetData_Load (String SPName, XElement QueryParam, Exception & e, Boolean bFlag) in d:\Sayam\April\Multiplay\DataAccessLayer\DataAccessLayer\DAS.cs:line 187

  Please let me know if I need to change anywhere.

  Thank you

  Siradji

  Hello

  I did a search for two days and found the link below to set up the DLL

  http://www.Oracle.com/technetwork/database/Windows/downloads/index-090165.html

  It worked well when installing using CMD

  Thank you.

• As the pipeline input channels are not supported.

  Guys, I have this script to add a vDisk to each virtual computer via one loop for each...

  $VMNames = get-Content "E:\Code\Scripts\VMware-VM-UpgradevHardware\VM_Batch-1.txt".

  # START the foreach loop

  {foreach ($vm to $VMnames)

  #Perform paraSCSI update

  Write-Host $VM

  Write-Host "Adding new CCG virtual disk..." »

  # Get - Vm $vm | New-harddisk - CapacityKB 2048 - persistent persistence

  $vm | New-harddisk - CapacityKB 2048 - persistent persistence

  Read-Host «allows to pause and check...» »

  . but when I run it, I get this error.

  New hard drive: cannot process the transformation of argument on the parameter "VM". As the pipeline input channels are not supported.

  E:\code\Scripts\VMware-VM-UpgradevHardware\pvSCSIUpdate3.ps1:55 char: 7

  + $vm | New-harddisk - CapacityKB 2048 - persistent persistence

  +       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: InvalidData: (EDM-SNEC - DBTEST:PSObject) [new-harddisk], ParameterBindingArgumentTransformationException

  + FullyQualifiedErrorId: ParameterArgumentTransformationError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.NewHardDisk

  Allows to pause and check...:

  Any suggestions?

  You should have an object VirtualMachine (output of Get - VM) on the hose, if you want to send it to the cmdlet New-hard drive.

  The concept of object by name (OBN) does not work for the channelling of entry here.

  You can do

  # START the foreach loop

  foreach ($vm in (Get-VM-name (Get-Content "E:\Code\Scripts\VMware-VM-UpgradevHardware\VM_Batch-1.txt"))) {}

  #Perform paraSCSI update

  Write-Host $VM. Name

  Write-Host "Adding new CCG virtual disk..." »

  New-disk-hard - VM $vm CapacityKB - 2048 - persistent persistence

  Read-Host «allows to pause and check...» »

  }

• CTE is not supported in a view definition? (11g)

  CREATE (OR REPLACE VIEW EM_V_MODEL_EOL AS

  WITH TERMSTATUS AS

  (SELECT MAX (SUBSTR(E.STATUS,1,1)) DURATION OF THE EPISODE AS

  GROUP OF IC_MEMBER_ID)

  SELECT M.*, CASE WHEN T.TERM IS NULL THEN 'A' END T.TERM END AS ANOTHER

  FROM EM_MODEL_EOL LEFT JOIN TERMSTATUS M T ON T.IC_MEMBER_ID = M.IC_MEMBER_ID

  )

  Command line error: column 7: 1

  Error report-

  SQL error: ORA-32034: non-use of the CLAUSE

  32034 00000 - 'use unsupported of CLAUSE'

  * Cause: Inproper use of CLAUSE because one of the following two reasons

  1 nesting of CLAUSE to the breast WITH clause is not yet supported

  2. for an application set, WITH clause cannot be specified for a branch.

  3. WITH the clause cannot sepecified in parentheses.

  * Action: correct the query and try again

  Does anyone know if this is now supported in the version 12 c?

  Don't include it in brackets:

  SQL > create or replace
  View 2 v1
  3    as (
  4 with t as)
  5. Select deptno, max (sal) sal of the group by deptno emp
  6                  )
  7 select dname, sal
  dept 8 d left join t on d.deptno = t.deptno
  9       )
  10.
  )
  *
  ERROR on line 9:
  ORA-32034: use of CLAUSE does not support

  SQL > create or replace
  View 2 v1
  3 as
  4 with t as)
  5. Select deptno, max (sal) sal of the group by deptno emp
  6                  )
  7 select dname, sal
  dept 8 d left join t on d.deptno = t.deptno
  9.

  Created view.

  SQL >

  SY.