6 Lightroom (installation DVD) does not on El Capitan. What can I do?

Similar Questions

• Installation DVD does not recognize my internal HD on a 2008 iMac

  I'm looking for suggestions here.  My 94 year old mother has used the iMac 2008 8.1 for internet e-mail.  We needed to upgrade its OS X 10.5 to be able to upgrade to a new version of safari to access some banking sites.  I upgraded the memory.  Sister has an iMac with OS X 10.6.2 Installation/restore dvd 2010.  I went to update.  I have caused the initial problem because after reading info seemed I could create a second partition on the hard drive of 250 GB and use Time Machine to back up before preceding.  See not all the warnings on the addition of the partition. (Yes, if I had not forgotten my external hard drive I should not try that, but I forgot it.)  Things seemed to make the partition, but time machine bogged down and hung up.  After trying many things, I found myself deleting and resetting on the internal extended (journaled) using HD, recreating a single partition using the guidelines GUID, thinking that I could just do a clean reinstall.  BUT, while I can check/fix delete etc the internal disk utility when HD started from my external hard drive so I boot from the OS install DVD it does not recognize the internal HD.   ? ? ?   Gives cannot update this post Mac.  If I run the Setup from the beginning of the disk upward once again, no offers to go to in the installation program.  I can access everything in THE RUNOFF when the post boot drive.

  Why THE works on the internal HD of the post start up (which was made with the 10.6.2 installation DVD), but not when started to leave the DVD left me puzzled. The DVD is not just see the it.  When it is started from the DVD with the external drive, he sees very well.   You are looking for ideas, thank you in advance.  By the Way the machine had no problem before starting this :) live and learn!

  If I understand what you were doing, you tried to use a Mac installation disc and to update another Mac? Is this correct?

  If I am not mistaken, which simply does not work. The installation provided with Mac discs won't work on another Mac, the original installation discs are machine-specific.

• video copied to DVD does not match project that I can see

  Good,

  No doubt another basic question, but I can't find an answer in the Adobe manual. I just discovered (after burning 8 copies of the same file) that the film on the DVD does not match what I see on the screen of project. The drop-down list to organize > project resembles what I want except that he seems to have the original avi file that I edited later as well as the changed file. The timeline seems correct. The timeline seems correct. I tried to eliminate the 'markers', but there was none to remove - the drop down menu gave me the ability to add markers. A Council, is that the DVD is picking up a model of menu that I played with, but could not get to work and then deleted. I ended up using the title screen very basic with black video in the high title of range drop-down list menu rather than the option model to change. I see the new title in the scene and timelines. Yet once the previous question just posted, I don't see anything in the screen clip
  (e.g., boxes of th) under 'organize '. In addition, the video clip on the DVD appears truncated by about half of playing time.

  At one point I have only the old menu design clip shows just below the montor screen could display but could not know how to remove.

  THX

  Yes, I want to.

  To preview your created disc, click the Preview button on the monitor of the disk layout.

• my computer hp laptop does not save in pdf, what can I do?

  my laptop HP do not save in pdf, what can I do?

  Hello

  Uninstall and reinstall your printer using the right drivers and installation on the HP Web site information.

  And there are some troubleshooting steps for her there too.

  HP website for your printer: http://support.hp.com/ie-en/drivers

  Or you can also ask in the Forums of HP's Support if the problem persists.

  http://h30434.www3.HP.com/PSG/

  @@@@@@@@@@@@@@@@@@@@@@@

  This can also help you:

  "Solve printer problems.

  In the upper right corner, select your operating system from the menu drop-down.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• Windows 7 x 64 installation DVD does not start on a Dell XPS One 2710

  I apologize in advance for the long post...

  Just got a Dell XPS One 2710.  Lot has happened, but let me clarify the current number as briefly as possible: the machine does not start from the HARD internal disk or the Windows 7 Installer x 64 DVD.  He gets through loading files and then gray progress bar when its colorful animation it blue screens with error CACHE_MANAGER.

  I ran the diagnostic, including tests extended memory tests, and they have not found any error in what either.

  When I was troubleshooting this problem previously, in some sort the motherboard got bricks (I don't know what exactly I did to cause that), but Dell has since replaced.  The first motherboard had BIOS version A09.  It has installed A11.

  I can't find any BIOS settings combination that will allow even the Installer Windows DVD to start with the Blue error screen CACHE_MANAGER.  I tried the UEFI boot modes and legacy, I tried RAID and AHCI.  I tried with and without loading legacy OPROMs.

  What I ultimately do is set the start mode of RAID so that I can use the SSD mSATA as a cache ("Accelerate" in the Intel RST Panel).  But I can not even the installer to start on where I can load drivers RST (assuming it's even necessary).

  Other posts have suggested problems with memory, but I took each of the two DIMMS one at a time and I always had the same problem.

  Should I suspect the hard drive?  When we arrived at the machine, he seemed to be running Windows 8 very well - until we went on the way to the side dark and downgraded to Windows 7.  Then once we started to have errors on updates, things has quickly degenerated from there.  In addition, again, diagnoses don't find any problems.

  Any suggestions on how to get at least this puppy to start?   .. .or what have we done wrong?

  Thanks EJN.  It turns out that there is certainly a hardware problem on this machine.  It was a refurbished Dell making machine and apparently when they renovated the it, they missed the real problem.

  The way I know that it is material, it's that we bought actually 2 of them at the same time.  When I started to suspect the material, I decided to try this process on the other.  He worked like a knife through hot butter.  But I will say that the combination of the BIOS set to boot legacy mode and still start the installation with the option to UEFI DVD in the start menu was not easy to understand at first.  But when I followed the correct steps, everything worked very well.

  For those of you who might try this, here are a few things I learned along the way:

  1. According to EJN, take the time to get/burn a CD to install Windows 7 x 64 that already has SP1 on it.  If you go to preserve the UEFI partitions and the boot hard disk, you must have x 64.  x 86 (32-bit) does not support UEFI.

  2 unzip the RAID drivers to the * root * your USB flash or floppy drive and have it in the machine when you start the installation DVD.  I could be wrong, but it seemed to me that the installer looked for them without having to explicitly say it loads the me.

  3. as said EJN, set your BIOS boot legacy mode but use F12 at startup to bring up the Windows Boot Manager and start the installation in UEFI boot mode DVD.  If you want to implement an SSD as cache for your hard disk, you will need to set the SATA controller in RAID mode.

  4. I had partitions UEFI and was able to leave them intact.  Here's a very brief explanation: http://technet.microsoft.com/en-us/library/dd744301%28v=ws.10%29.aspx your results may vary.

  5 take this one as a possible suggestion that is worth what you pay for it: when I got the USB with RAID drivers at the root before starting the installation DVD, I didn't need to load the drivers explicitly.  As I said, it seems that the installation program has been smart enough to find and load what it takes, but honestly, I don't know.  When I load them explicitly, I got errors saying that the installer could not install on the partition, I had chosen.  Makes me think that I could have loaded both times.  What worked for me was NOT explicitly their cargo.

  6. you MUST be at your PC when Setup has completed copy and unpack the installation files.  Don't forget that you have your BIOS set to start legacy mode.  So when he tries to restart to complete the installation, it will try to start using the table inherited from on your hard disk - who is not here because you did a UEFI installation with partitions for UEFI.  So when Setup restarts the first time, you might as well get into the BIOS here and choose the UEFI boot mode.  If you do not, you will need to grab it whenever it restarts using F12 and manually tell it to boot from your hard drive using the UEFI.

  These steps, you should get installed and running.  But another thing I had to understand that when first, I installed and executed the dashboad Intel RST, there is no acceleration option even if my mSATA SSD was found healthy.  I found that if it is formatted and partitioned, you actually go into Disk Manager and delete the partition before the RST dashboard he sees as available for use as a cache.

  I hope this helps others out of me.  It's a heck of a lot easier when the hardware is not bad!

• Installer of creative cloud wants to make changes, it does not accept my password, what can I do?

  Recently, I had to replace the hard drive and had not saved my iMac from apple, I'm trying to reinstall photoshop etc but I can't get past the type your password box. I tried every possible password I've ever done!

  Hi Jessica,.

  Please try to password and username admin toy machine.

  Kind regards

  Sumit Singh

• Satellite P100 - does not start until then, what can I do?

  I've had my laptop for about two years and treat it with kindness.

  However, recently it has crashed on me with a blue error screen. Then, when it it restarted just slept on a black screen with the lights and the fan is running. I left it like that for a while, to see if it was just to be very slow, but not luck.

  Help, please!

  Hello

  Hmm... You could try this workaround, Buddy:

  Remove the AC adapter and the battery and wait an hour. Then connect the two devices again and try to start the laptop.
  Maybe it works.

  If this isn't the case, I think that you need help from a technician for laptop. It could be a malfunction of the equipment.
  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• my computer does not correctly load anything, what can I please

  We have an asus with windows 7 premium.
  When I try to open such a game won't load only partially and then it just hangs, and the computer is also very slow.
  Any suggestions please.

  Generic advice
  * Make sure you do your household from the computer on a regular basis.

  If you do, everything should be ok.
  For example
  Check the disc.
  http://Windows.Microsoft.com/en-AU/Windows-Vista/check-your-hard-disk-for-errors
  Defragment
  http://Windows.Microsoft.com/en-AU/Windows7/improve-performance-by-defragmenting-your-hard-disk
  Cleaning disc
  http://Windows.Microsoft.com/en-AU/Windows-Vista/delete-files-using-disk-cleanup
  also
  http://www.Microsoft.com/athome/Setup/optimize.aspx

  * IE. - Security - delete browsing history.
  Check for the unwanted plugins.

  * As appropriate > IE open
  * Tools
  * internet options
  * advanced
  * reset
  
  * Make sure your windows Update is running.
  All programs MUST be updated regularly.

  * If the stop overclocking.
  
  * On a regular basis, check in the Task Manager/ process / all users to see that it performs.
  
  * Check in the event viewer to find errors frequently.
  Write down everything with a red mark in Application

  * Regularly monitor > Perfmon - {Task manager - resource monitor - CPU, memory etc.}

  * Remove all software you have evaluated and decided that you do not want to keep.
  
  * If > run: (from a command prompt) - SFC/scannow and let it check/repair/check your system files
  http://support.Microsoft.com/kb/929833?WA=wsignin1.0
  
  * Some people optimize and compact the registry.
  It makes me VERY nervous and therefore I did not.

  * Re - registry cleaners
  Registry cleaners are often considered to be useful.
  Note - IMO - there is no reliable way for a third party program to know if a particular key is invalid, redundant or neither.
  Some registry cleaners may not know with certainty if a key is still being used by Windows or what may have detrimental effects removing it.
  This has led to examples of registry cleaners causing loss of functionality and/or system instability.

• I have adobeXI stuck in limbo in my computer. I can't uninstall it or install any new version, and adobe does not work properly. What can I do?

  Adobe XI is stuck in limbo on my computer and I can't uninstall it or install update for adobe systems. What can I do to get rid of this one and install a update or at least a version I can use?

  Hi maggieg30085397,

  If you're on windows computer try uninstall using this cleaner tool Download Adobe Reader and Acrobat tool - Adobe Labs.

  Reboot your system and install the latest version using this link Adobe - Adobe Acrobat Reader DC Distribution.

  I would like to know if it works.

  Kind regards

  Nicos

• Upgrade to Mac Yosemite, now AE does not at all. What can I do?

  I own the Master Collection for Adobe CS6 on Mac. I upgraded to Yosemite before realizing that this would cause a lot of my Adobe purchases to stop working. I need After Effects to work so that I can complete a project that I worked on. Anyone know a solution?

  Install the update After Effects most recent CS6:

  http://Adobe.LY/DVA_updates

• Adobe Photoshop Elements 13 DVD does not

  05/2015 bought Adobe Photoshop/Elements 13 at amazon. Never installed as the computer died before we could.  Have now new computer and installation DVD does not.  Error "specified file not found."  How can this problem be fixed?

  Download the installer for Adobe

  Download Photoshop Elements | 10, 12, 14, 11, 13

  Install and enter your serial number.

• Form of presentation of workspace does not show the text, what is the problem?

  Why space Oracle BPM Studio does not display my text?
  
  I added a normal text of the elements of design to a presentation. The text is normally displayed in "Preview in browser", but when I run the workspace, it does not appear the text.
  
  Here are the properties for the text element:
  Name: label17
  Tab order: default value
  Click: < no >
  View: My text
  Font: Times new Roman, 20
  Background color: [no color]
  Foreground color: [no color]
  
  I also tried with:
  
  Background color: 255,255,255 (white)
  Foreground color: 0,0,0 (black)
  
  But the text does not just appear.
  
  What can cause the text displayed in the preview, but not in the form of workspace?

  Hello

  I wonder if it is related to the presentations of the purpose of BPM multilingual ability.

  You could:
  1. right mouse click on the project tab in the project browser.
  2. click on "project Preferences".
  3. click on 'languages '.

  You see several languages? Is English (or whatever language you are using inside the Studio) by default?

  When you log in the workspace, you could check the language you use (Journal of-> click on "Settings" in the upper right)-> tab 'View' is selected, is the language you have chosen by default in the selected Studio?

  Hope this helps,
  Dan

• 'Create a Windows 7 or a later version installation disc' does not appear as an option to select tasks

  I have a MacBook Pro (15 inch, late 2011) race El Capitan.  I just installed a new hard drive and am trying to install Windows 7 using Boot Camp Assistant.  In the window select tasks 'Create a later version or Windows 7 installation disk' does NOT appear as an option.  How to create the Setup disk?

  

  I use https://support.apple.com/en-us/HT205016 to get step by step instructions

  I have already created the disc image of the DVD install disk Windows following the instructions of https://support.apple.com/en-us/HT203909

  When I open Boot Camp Assistant I'm unable to create a Windows 7 installation disc

• CD/DVD does not recognize the drive.

  CD/DVD does not recognize the drive.  Error message-"Insert a disk." "" "Insert a disk in the drive (E or F, depending on whether one in use).  I bought a DVD/CD thought exteranl today that might work.  Same error message with the external dvd/cd.  Can hear the disc turning when it is inserted during a short period of time, maybe 20 seconds, then it stops.  Sometimes, the disc is ejected when the error message appears, sometimes not.  Same results even with blank CDs.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Lightroom6 installation code does not work

  I'm tired, the installation code does not work.

  After 10 days, there is no way to be supported by Adobe, but they took my money.

  I'll block the payment and never again buy Lightroom.

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html