Win 8 on Touchsmart 600-1055?

Similar Questions

• TouchSmart 600-1055-Message of disk error hard hd521-2w

  I have a Touchsmart 600-1055 is our guarantee. I am running Windows 7 (64-bit). I have hard to start when the computer hangs at the Windows screen. I was able to carry out repairs and after many attempts it finally began. I ran the test of the system and the only test that failed was for my Smart hard drive test and gave the code of hd521-2w. I guess that means that the HD is about to go. Am I wrong? And if yes, what is the replacement and can I upgrade to 2 TB and when and where can I find instructions on how t it? Thank you!

  Hello:

  Yes you are right. The hard drive has virtually disappeared.  Back up your files.

  I would go no larger than a 1 TB HARD drive.  2 TB might work, but it might not.

  SATA II 7 200 RPM desktop drive, that's what you need to replace with.

  Here is the link to the guide of upgrade and maintenance.

  http://h10032.www1.HP.com/CTG/manual/c01895538.PDF

  You will also need a set of discs of recovery to reinstall the operating system and the programs that came with thePC.

  Paul

• 600-1055: replacement fan

  I have a HP Touchsmart 600-1055 NY539AA need to replace fans.  Where can I find these?  I looked online and can find a lot of fans, but none that appear to be a direct replacement.  Someone at - it a good source?  Thanks in advance!

  Hello

  Please bookmark the following link which shows all the parts available for your machine:

  http://PartSurfer.HP.com/search.aspx?SearchText=NY539AA

  Looks like you need a fan (part number 537510-001). You can buy from the link above (check the square to the left of the part number). Not available on Amazon now:

  https://www.Amazon.ca/HP-537510-001-blower-M5/DP/B0085J39RE

  https://www.Amazon.es/sparepart-HP-blower-M5-537510-001/DP/B0085J39RE

  Kind regards.

• HP TouchSmart 600: HP TouchSmart 600 does not power on and flashing lights

  Hello

  Need your expert help! My HP TouchSmart 600 won't turn on. The lighting at the bottom of the screen will flash green. It worked fine the day before. Is it the motherboard? Or a power supply problem?

  Hi @YUL_TechWriter,

  You can go surf part HP

  On the right, select the country

  In the quick search, enter the serial number and it came with the part for this computer list.

• 600-1050 HP Touchsmart All in: upgrading ram touchsmart 600

  I bought a

  Memory RAM-DDR3-1333 8 GB [2x4gb] Upgrade Kit for

  to upgrade my HP Touchsmart 600-1050 all-in-one.

  However, he had not worked and shows only a black screen after the installation.

  The discription is

  Memory 4GB DDR3 - 1333 PC3 - 10600 Non - ECC Unbuffered 204 pin 1.5V = 9 CL

  Then after, I bought another

  8GB (4GBx2) DDR3 1600 MT/s Kit (PC3 - 12800) CL11 SODIMM Notebook Memory Modules CT2KIT51264BF160B / CT2CP51264BF160B to amaozn.com

  It has the same problem.

  Those who are not compitable with my computer?

  If so, let me know a compitable memory set for upgrade.

  Yes, that would be true, but that model is an all-in-one computer, it is not flexible for the replacement of the Board of Directors, as a regular desktop would be. You probably only have the option of a Board.

• TouchSmart 600: Low battery for the keyboard will not disappear

  After upgrade to windows 10 in PC all-in-one TouchSmart 600; whenever the PC wakes up from sleep mode, low battery for the keyboard warning message appears despite the fact that the batteries are new.   The message 'form' has no way of closing other that "remind me later".

  Solution: new keyboard, Logitech > bought.  Must say that I was so tired of the current fake e-mail I just replaced my HP keyboard and mouse with another third-party.  Thanks for all those who have responded or tried to help.

• Using a usb to hdmi cable can I connect my TouchSmart 600 computer to my TV without damaging my PC?

  Using a usb to hdmi cable can I connect my TouchSmart 600 computer to my TV without damaging my PC?

  Suzanne,

  With the help of a video-to-USB device like the EVGA UV plus + 19 will not damage your computer or HDTV. The EVGA UV + 19 more is an active device and is not just a passive cable. To the best of my knowledge, there is no passive cable which will convert the USB ports in HDMI ports.

  Frank

• My desktop HP Touchsmart 600 computer: My HP Touchsmart 600

  Desktop HP Touchsmart 600 has a about 5 inches square dead spot on the top left corner of the screen.  Is this a problem that can be easily repaired?  If so, can it be repaired locally?

  Thank you...

  Bruce

  @ButchBob, welcome to the forum.

  If your computer is no longer under warranty, I suggest you find a computer repair shop known locally to see what they have to say.  It shouldn't be too difficult for them to fix it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP TouchSmart 600: External Toshiba USB 3.0 drive not recognized on HP Touchsmart

  I have a desktop HP Touchsmart 600, and I bought a 1 to Toshiba external USB 3.0 drive and when it plug to the USB port, it does not, even tried the other port and restarted, but does not yet recognize, I tried to reload the USB Chipset, but no cigar. I am able to use it on my Sony laptop. I would be grateful for any help or suggestion. Thank you people.

  Hi @StevieB1,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the external drive not being seen. I'll be happy to help you.

  Please, try the steps in Troubleshooting connections USB (Windows 7).

  I hope this helps. Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• RTM of Windows 8 installation Fail on Touchsmart 600-(1050)

  Has anyone else had much luck RTM of Windows 8 on a Touchsmart 600 installation? My installation starts ok, but after the first reset it everything is there with the logo and the whirlpool circulating. The boot record, I checked and I have a suspicion that he doesn't get Windows to start after the reset.
  
  Anyone else facing this?

  Just for everyone to know that I finally managed to fix it. It appeared that my question was a known Windows 8 Preview version that Microsoft has released a fix for (http://support.microsoft.com/kb/2727113). Apparently, there's a bug which can cause freezing symptoms I was see and by running the command

  bcdedit/set disabledynamictick no

  due to the gel to stop. It seems that the update has been released with RTM of Windows 8, so it does not seem to have worked at least the Touchsmart 600-1050. Many other people are reporting that it didn't work either, but as long as the above command will stop the gel I'm happy.

  My installation is going well now, work all, all happy. The only thing I needed to update was the touch screen 2.6.9.0 to 2.6.10.0 pilot who has really improved stability. That and the driver for the buttons on the side of the case.

  Happy days!

• HP TouchSmart 600-1265qd does not connect to Samsung LED 55 '' TV via HDMI

  HP TouchSmart 600-1265qd does not connect to Samsung LED 55 '' TV via HDMI. I have connected the same cable to your laptop and it connects, suggesting that there is a problem with the CV. The TouchSmart has a GeForce GT230 graphics controlled by the control panel NVIDIAnView. By using the system control panel and the control panel NVIDIAnView, I have not been able to locate the Samsung monitor.

  I made restarts it etc. also without success. Does anyone have a suggestion that I could follow.

  Hello

  It is a machine CTO, but have many models of the Touchsmart 600 HIMI IN port series, not OUT port so you can't connect to a TV using HDMI in order to get the picture on the TV.

  

  Kind regards.

• HP TouchSmart 600 - 1070 has blocking of overheating?

  I am repairing a Touchsmart 600-1070a who suffered a fall from his office (damaged the on/off switch, but that is fixed), already replaced the HARD drive that had bad sectors.  There seems to be a lot of cumulative small hiccups, including;
  
  * sometimes not even bring to the top of the screen on powerup, remains black despite the fans running, power light.
  
  I suspect that it is a matter of gfx module or connector problem, as I loosened and forced the GFX module in its unlocked connector and reinstall the graph LVDS lead and - apparently - to have solved the problem for now.
  
  * for execution, will crash intermittently Win7 and how the region of radiator for chipset is exceptionally hot (about 50' C) and it is with the metal plate still attached.
   
  To do this, I don't know what approach to take.  There is a spacer between the heat sink for this chipset and the metal casing that is filled by a heat-carrier pad.  My suspicion is that the pressure of the arriere-stand against the metal actually requires chassis-pad-heatsink to stick, but I think now that the cushion is probably due to replace or another option sorted as things are just not too hot
  
  Someone else had a similar problem?
  
  The GPU and CPU radiators have all been cleaned with compressed air / brush and work correctly.
  
  (photo showing the motherboard exposed without the metal support pregnant.  The radiator in question is orange, one located in the center of the motherboard near the memory.
  
  

  I placed a layer of transfer thermal padding that is normally used between transistors/MOSFETS and sinks of heat, about 1 mm thick, on top of the orange radiator - seems to have now settled the system down, played a video DVD and YouTube full length at the same time without crashing.
  
  So now, we have chip|heatsink|transfer-padding|pale-transfer-thick-padding|metal-backing.
  
  Active cooling a bit more would have been nice in the form of a fan from somewhere, but as long as it doesn't crash, I guess.   Metal case houses approximately 49' C around the location of the radiator.

• TouchSmart 600-1350: what is the REAL TouchSmart 600-1350 RAM Specs?

  I see HP screwed up once again, big surprise there!

  Specification of RAM TouchSmart 600-1350 (citing the HP site):

  200 pins, DDR3 SO-DIMM

  Since 200 pin SO-DIMM is really a standard DDR2 and DDR3 is a 204 standard pins, I chose best educated guess one that suits and matches at speeds and tensions with the computer of my client for the upgrade. We ordered 2 Kingston PC3-10600 off 4 GB Max computer modules, but guess what? It don't work!

  Given that HP can't even say DDR2 DDR3 standards, can someone at HP who really knows what is up please tell me the specifications of memory live CORRECT for this system? Perhaps eventually make corrections to specifications of systems page too. Beyond that, a refund of $40 to my disappointed customer would be too big, but I not holding my breath!

  Anyway, why did 2 4 GB Kingston 204 pin PC3-10600 modules work? Normal blood pressure, nothing special...?

  Hello:

  Based on my experience, any HP PC with an Intel series 5 using portable memory chipset... it must be VERY specific with what you get memory.

  Please read this post related about this submission, in my view, that you have to buy...

  While it is a laptop, he uses the memory of the laptop and has a chipset Intel 5 series like the one you are working on.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/memory-upgrade-6550b/m-p/5340551/highlight/true#M63185

• These enhancements are compatible with the HP TouchSmart 600-1120

  IM thinking to do this

  Intel Core i5 430 M Dual Core (A)

  and I was wondering if it would be good for the games because I think intel core i7 is a bit expensive. If not, which ones is better for about the price of SMEs?

  IM also thinking about getting more RAM and I was wonderingif the ram card would be compatible with my computer.

  G.SKILL 8 GB (2 x 4 GB) 204-pin DDR3 SO-DIMM DDR3 1333 (PC3 10600) laptop memory model F3-10600CL9D-8GBSQ

   

  also, can someone send me a link on where to find video cards I think look terrible, and I hope that I can update if I get the new processor intel core. and which ones would work for the game, at least its unnecessary.

  Hello

  The following link shows the specifications of your computer:

  HP TouchSmart 600-1120 desktop PC

  1. CPU: no problem you can see a list of the CPU support on the link above.

  2 for the RAM: please check the following specifications:

  Upgrade memory information:

  • Dual channel memory architecture

  • Two DDR3 SO-DIMM Sockets (204 PIN)

    • SO-DIMM type-PC3-10600 (DDR3-1333)

  • Memory non - ECC, unbuffered

  • Supports 4 GB DDR3 SO-DIMM

  • Supports up to 8 GB on 64 bit computers

    Memory maximum only if you use DDR3 SO-DIMMS to 4 GB modules.

  • Supports up to 4 GB * on 32-bit computers

• can\ ' t install windows 8 on my hp touchsmart 600 pc

  I have an HP touchsmart 600-1050 ru PC, serial number [personal information deleted], product number: VS258AA - ACB 7 running windows. I bought an upgrade for windows 8 on October 27, 2012 and so far I can't have it work on my PC. Please tell me what to do to have my windows 8 install

  Hello, Mary:

  Has even thought of field sorry that our computers were made before windows 8. HP doesn't come back so far to develop drivers for Windows 8 for our HP Touchsmart 600-1050 series computers or 300. Our computers have only eight point touch. Windows 8 requires 10 points. Yes, you can install windows 8 but you'll lose touch features but also of many other features as well. Please get Windows 8 on touchsmart here in this forum. You can see how others have installed. What software they were no longer able to use and the features that they have learned to live with out. After reading it then you can decide if you want to take a chance and make the top grade or not. If you do the high-grade remember that your computer won't work properly thereafter. Why is this? Because HP has neither they will never develop drivers for our computers and the third party did not develop them as well. You can see what others had trouble finding. frrw.