6229 OR causes error-50202 on Fujitsu/Siemens Celsius PC

Similar Questions

• With PCI-6229 NMI Parity error

  Currently, I'm trying to get a PCI-6229 to work with one of our lab computers. We'll use LabVIEW 8.5.1 with DAQmx 6.7.1 to program the card. Using our measurement VI owner, the computer will crash at some point (not really in reproducible way) with a blue screen saying "NMI: Parity Check / Memory parity error. All the tests of auto and examples of NOR (delivered with LabVIEW) perform well however.

  Most likely, this problem is not a RAM issue (MemTest I tried, different memory chips, different memory banks). Also, the PCI computer bus works very well otherwise (for any other acquisition cards for example). Annoying enough, the card seems to do a great job in an old and slow computer. Which is maybe something to look at? Or are there other ideas?
  Our workplace is a Fujitsu-Siemens of Celsius M460 with BIOS version 6.00 rel. 1.09 running Windows XP (32-bit version). The software to use with the card is LabVIEW 8.5.1 with DAQmx 6.7.1.

  Dear Lutz,

  I could reproduce the blue screen, and
  changed your program in order to avoid the race condition. What is
  actually happens is you want 2 tasks over time the
  AOSampleClock as a source before the task of AO started.

  When
  programming as in the example I sent you (see attachment VI), you
  shouldn't deal with this blue screen problem more. However, I recognize
  that such a thing should not happen even when it's 'bad' programming... I'm going to
  inform the development so that it will be corrected with the next DAQmx
  version of the driver.

  Merry Christmas,

  P. Lawrence

  National Instruments

• Error 50202

  I use VB and NIDAQmx program (8.5 and NI 6218) for the acquisition of data.  After collecting data about 60,000 points program crashes with error 50202 "Expalnation is not found for the requested stuas code.  Check that the required status code is correct. "I noticed that the pagefile is completely sold out indicating a memory leak.  I don't have a memory leak in the VB program section and I write the data to the HD all 16,000 points and clear all buffers. The Dell P4 computer and doesn't have the motherboard or the version of the BIOS that is mentioned in another thread.  Any thoughts?

  Hi Sonia,.

  Thanks for posting.  There are some suggestions that I have which can solve the problem:

  • You establish a DAQmx task in a loop?  If you are not clear the task at the end, this can cause the leak memory.  Each call should allocate more memory without erasing the previous task.  If this is the case, you must make sure to disable each task that you create in your code.  More information can be found here.
  • It would be a good idea to upgrade your version of DAQmx 8.7.2 to see if that fixes the problem.  We had problems in the past similar to this (on different motherboards) with DAQmx 8.5 and earlier versions.  More information here.
  • Some versions of files called by the .NET API DAQmx .dll can create this behavior.  Refer to this knowledge base to see if this applies to you, there is a fix that is linked in the article that the problem will be resolved if it is the cause.

  Let me know if these suggestions do not solve the problem.  You are able to run the DAQmx shipping examples?

  -John

• Problems with Vista for a Fujitsu Siemens Amilo Pi 2512 recovery disks.

  I have a Fujitsu Siemens Amilo Pi 2512. I need to re install Vista using recovery disks that I created. However when I get to step 3, he tells me all the data will be deleted one get a "Script error 794: (Null)"message. " The laptop, then restarts. Can someone help? Please, I beg you!

  Some manufacturers have more available Vista recovery disks.

  As it happened with Fujitsu, you need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

• blocking of language by Fujitsu Siemens module

  I have the French keyboard on my laptop Amilo, but can not change the language of the OS to English in Vista home Premium.
  I want to get the Windows 7 upgrade, but with version English. What can I do?
  I am so angry however Fujitsu Siemens I can sue for misrepresentation because none of their literature indicates the ability of language change is not included. Actually I have been assured by sellers for Electro filing that it has been registered and is not a problem to change between languages > it was represented to me the two support tech French and English people. (I have recorded conversations). These _. Marketing people should return to the airline ticket reservations where they belong.

  I gave you the right answer.

  These are public Forums, not Microsoft.

  You are helped for FREE by users of Vista colleagues here, with Microsoft support engineers answering some questions.

  I do not work for Microsoft!

  And do NOT post in all capitals.

  He has considered a rudeness/shout on the Net, in addition to being difficult to read.

  Forum Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/threads

  Link above is "Preparing for Windows 7" Forum.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Link above is Windows 7 Forum, to more technical questions about windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Adding a player of dvd rw to my fujitsu siemens.

  I have a fujitsu siemens 1.3 desktop celeron with 512 MB of ram and 40 GB HDD. There only compact disc player cd player. I recently acquired a pioner dvd rw drive and would like some advice on how to install and all the possible problems that I meet. want advice on the best possible decoder to use with it. Thank you.

  There are a number of sites in the statement.  This video on YouTube was the first hit in a Google search for "How to install a DVD player" and there are about a dozen more videos on this YouTube page.  There are also many non-video instructions.  And here's one: http://compreviews.about.com/od/tutorials/ss/DIYCDDVD.htm
  You shouldn't need special "decoder" - Windows Media Player should be able to play DVDs of your new drive.  (Writing) software DVD burning is another story - Windows does not come with DVD burning s/w, so you do not have to recover some if you want to do.  Nero and Roxio are probably the two most well-known trademarks.

• Reinstall XP fujitsu/siemens scalo

  Reinstalling XP.  Dator fujitsu/siemens

  Hi perrafa3,

  I recommend you to communicate with Windows Home Server Support for assistance.

  http://support.Microsoft.com/ph/12624#TAB4

  Hope the helps of information.

• Fujitsu siemens li 2727

  Hi just downloaded windows7 in a fujitsu LifeBook li 2727 laptop, now the capitibilty wireless is lit, was told to download some drivers for it, been on the website down load them, but I can't very well where to download from, been on the site, they said, but they are not there , so wonder if someone can help me please.

  Everything inside your computer (and from the outside, like your printer) has a software called "drivers" corresponding which allows the operating system (Vista or Windows 7 for example) to use this material. Without the right drivers, Windows may know you have installed wireless hardware, but may not use it (no connectivity).

  Before installing an operating system on a computer, the first thing that the person should do is go on the computer mftr's site. (Fujitsu LifeBook in your case) and make sure that the drivers are available for this operating system. You apparently did not this. On a generic/home built computer you'd get drivers Web sites hardware component mftrs., but on a laptop you get only the drivers of the computer laptop mftr. It is particularly important on laptops to have the drivers and software cell phone (as the power management software) for a specific operating system because the material inside the laptop's owner. IOW, computer laptop hardware is made specially for this brand/model of laptop.

  In some cases, older drivers will work; for example, you might be able to use Vista in Windows 7 drivers. Ever, you can use 32-bit drivers on a 64 bit system.

  All that being said, if there is no driver for Windows 7 on the site Web of Fujitsu Siemen wireless network adapter then your choice is:

  1. use an external USB wireless network adapter that works with Windows 7; or
  2 contact the Fujitsu Siemens technical support and find out if this laptop will be supported in Windows 7 (wait for drivers to be written and made available); or
  3. restore your computer as long as you plant any method provided by Fujitsu Siemens and run the operating system for which the computer has been designed. MS - MVP - Elephant Boy computers - don't panic!

• Audio driver problem - Fujitsu Siemens Esprimo C5900 + Win7

  Hello

  I reinstalled my Esprimo C5900, and now I have no sound driver. If I find one for Win7, it says that the hardware is not compatible; If I want to install sound card, it is said that Win7 is not supported...
  I tried Realtek and SoundMax drivers, two of them did not work.
  I know that there should be a pilot, because before the reinstall, this has worked (and I remember that it was difficult to manage to find a...) I also tried Windows Update methods, and nothing has changed.

  What should I do?

  Thanks for your replies.

  Hello

  Thank you for your response.

  Your Fujitsu Siemens Esprimo C5900 model is not compatible with Windows 7. There is no driver available for Windows 7. You can check this in manufacturing site Web http://support.ts.fujitsu.com/Download/ShowFiles.asp for more information. I suggest you to install the audio driver for Windows XP compatibility mode and check.

  Let us know the status of the issue.

• My friend installed Windows 7 on laptop Fujitsu Siemens, which is not compatible with it. Now I have no sound. Can I reinstall Windows Vista?

  I have a laptop Fujitsu Siemens, a friend installed Windows 7 on it, but apparently this laptop is not compatible with this that I have been informed by Fujitsu.
  It was initially installed Windows Vista Basic.
  Now I have no sound at all - I have tried everything to fix this, my drivers show they work perfectly.
  It would be desirable to try to reinstall Vista, I won't be without the inner workings at all, I'm not very computer so would appreciate any help at all, in a simple and understandable way.
  Thank you very much

  Original title: Pam

  Hello

  There are several methods to reinstall Vista.

  This can help you:

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  You can contact Fujitsu and ask them to send you a set of Vista recovery disks.

  They should do this for a small fee.

  http://www.Fujitsu.com/SG/products/PC/support/drivers/recovery_faq.html

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Installation of Windows 7 was able to destroy this Option:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Computer desktop Fujitsu Siemens, no audio output device installed after upgrading to Windows 7

  I have a Fujitsu Siemens computer that was running Windows XP. I put it to update to Windows 7 and it seems to be a problem to find a compatible sound card driver. He was previously SoundMAX Integrated Digital Audio.

  The speaker at the bottom of desktop icon has a red x on it and when I hover over with the mouse, he said, "no audio output device is installed".

  Device Manager displays "Multimedia Audio Controller" under "other devices" but said that no driver files have been loaded.

  It seems that the driver has been deleted and I can't find a compatible replacement.

  Help, please! I tried to watch countless blogs where people seem to have similar problems but none of the answers seem to work.

  Thank you.

  Re-post giving the name/model/REF. n ° of your PC.

  If there is no specific driver for W7, then you can try to install Vista drtivers (if they exist) in compatibility mode (no guarantee it works well).

  See you soon,.

  Jerry

• Common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12

  Is there a common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12?  I get error messages when I try to use one of these programs

  Hello

  Thanks for the reply with the details.
   
  Problem with opening PDF documents, please see the link and follow the steps in the article:
   
  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244#top
  Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished.
   
  See the link for the question with idevices:
   
  iTunes for Windows: "Could not load the data class" or "Cannot load provider data" alert synchronization services
  http://support.Apple.com/kb/TS2690
   
  Problem with TurboTax 12, check out the links and follow the steps:
  http://TurboTax.Intuit.com/support/IQ/install-product/reinstalling-the--NET-Framework/GEN12673.html
   
  5639 error: Cannot configure the product update system
  http://TurboTax.Intuit.com/support/IQ/update-product/error-5639--can-t-configure-product-update-system/SLN12386.html
   
  http://TurboTax.Intuit.com/support/IQ/install-product/Troubleshoot-installing-and-running-TurboTax--Windows-/SLN63018.html
   
  If the troubleshooting steps above do not help, check in a new user account:
  Reference:
  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account
   
  If it works in the new user account, then the current may be corrupt user account.
  To fix the damaged user account, follow the steps in the following article:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Root cause error code is Houston-26049. Error messages settings are {0 = XxwfsMdmCustSummaryReportVO} oracle.jbo.server.ViewDefImpl.doLoadFromXML(ViewDefImpl.java:4762)

  Hello

  We have built a standalone ADF on Jdeveloper 11.1.1.7 application that interacts with the Oracle database using business components.

  XxwfsMdmCustSummaryReportVO is a view object that is based on an entity object. After the application is redeployed on a server remote weblogic, whenever a user attempts to access the application, the page is empty. Even if the error disappears once this managed server is restarted. On checking the logs we could trace it down to the below error:

  oracle.jbo.PersistenceException: Houston-29114 ADFContext is not configured to process this exception messages. Use the code of exception stack trace and error to investigate the root cause of this exception. Root cause error code is Houston-26049. Error messages settings are {0 = XxwfsMdmCustSummaryReportVO}

  at oracle.jbo.server.ViewDefImpl.doLoadFromXML(ViewDefImpl.java:4762)

  at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:4015)

  at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:3962)

  at oracle.jbo.server.MetaObjectManager.loadFromXML(MetaObjectManager.java:560)

  at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:1300)

  at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:626)

  at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:546)

  at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:528)

  at oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:794)

  at oracle.jbo.server.ViewDefImpl.findDefObject(ViewDefImpl.java:876)

  at oracle.jbo.server.AMViewUsage.createViewObject(AMViewUsage.java:112)

  at oracle.jbo.server.ApplicationModuleDefImpl.loadViewObject(ApplicationModuleDefImpl.java:660)

  at oracle.jbo.server.ApplicationModuleDefImpl.loadComponents(ApplicationModuleDefImpl.java:921)

  at oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:510)

  at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:87)

  at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:158)

  at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:73)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:2836)

  at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:583)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2396)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2270)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3169)

  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:592)

  at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:234)

  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:525)

  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:520)

  at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:523)

  at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:869)

  at oracle.adf.model.binding.DCDataControl.setErrorHandler(DCDataControl.java:484)

  at oracle.jbo.uicli.binding.JUApplication.setErrorHandler(JUApplication.java:261)

  at oracle.adf.model.BindingContext.put(BindingContext.java:1412)

  at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:174)

  at oracle.adf.model.BindingContext.instantiateDataControl(BindingContext.java:1128)

  at oracle.adf.model.dcframe.DataControlFrameImpl.doFindDataControl(DataControlFrameImpl.java:1638)

  at oracle.adf.model.dcframe.DataControlFrameImpl.internalFindDataControl(DataControlFrameImpl.java:1507)

  at oracle.adf.model.dcframe.DataControlFrameImpl.findDataControl(DataControlFrameImpl.java:1467)

  at oracle.adf.model.BindingContext.internalFindDataControl(BindingContext.java:1261)

  at oracle.adf.model.BindingContext.get(BindingContext.java:1211)

  at oracle.adf.model.dcframe.DataControlFrameImpl.restoreDataControl(DataControlFrameImpl.java:953)

  at oracle.adf.model.dcframe.DataControlFrameImpl.restoreSnapshot(DataControlFrameImpl.java:1022)

  at oracle.adf.model.BindingContext.restoreSnapshot(BindingContext.java:766)

  at oracle.adf.model.BindingContext.beginRequest(BindingContext.java:1876)

  at oracle.adf.model.BindingRequestHandler.invokeBeginRequest(BindingRequestHandler.java:395)

  at oracle.adf.model.BindingRequestHandler.beginRequest(BindingRequestHandler.java:261)

  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:203)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)

  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:292)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: java.lang.IllegalArgumentException: no oracle.jbo.AttributeDependency$ class const enum Type.

  at java.lang.Enum.valueOf(Enum.java:196)

  to oracle.jbo.AttributeDependency$ Type.valueOf (AttributeDependency.java:20)

  at oracle.jbo.server.AttributeDefImpl.loadDependencies(AttributeDefImpl.java:6235)

  at oracle.jbo.server.AttributeDefImpl.loadUserDefinedAttr(AttributeDefImpl.java:4672)

  at oracle.jbo.server.ViewAttributeDefImpl.loadFromXML(ViewAttributeDefImpl.java:2190)

  at oracle.jbo.server.ViewDefImpl.loadAttributes(ViewDefImpl.java:7081)

  at oracle.jbo.server.ViewDefImpl.doLoadFromXML(ViewDefImpl.java:4631)

  at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:4015)

  at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:3962)

  at oracle.jbo.server.MetaObjectManager.loadFromXML(MetaObjectManager.java:560)

  at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:1300)

  at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:626)

  at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:546)

  at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:528)

  at oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:794)

  at oracle.jbo.server.ViewDefImpl.findDefObject(ViewDefImpl.java:876)

  at oracle.jbo.server.AMViewUsage.createViewObject(AMViewUsage.java:112)

  at oracle.jbo.server.ApplicationModuleDefImpl.loadViewObject(ApplicationModuleDefImpl.java:660)

  at oracle.jbo.server.ApplicationModuleDefImpl.loadComponents(ApplicationModuleDefImpl.java:921)

  at oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:510)

  at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:87)

  at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:158)

  at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:73)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:2836)

  at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:583)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2396)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2270)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3169)

  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:592)

  at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:234)

  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:525)

  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:520)

  at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:523)

  at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:871)

  at oracle.adf.model.binding.DCDataControl.setErrorHandler(DCDataControl.java:484)

  at oracle.jbo.uicli.binding.JUApplication.setErrorHandler(JUApplication.java:261)

  at oracle.adf.model.BindingContext.put(BindingContext.java:1412)

  at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:174)

  at oracle.adf.model.BindingContext.instantiateDataControl(BindingContext.java:1128)

  at oracle.adf.model.dcframe.DataControlFrameImpl.doFindDataControl(DataControlFrameImpl.java:1638)

  at oracle.adf.model.dcframe.DataControlFrameImpl.internalFindDataControl(DataControlFrameImpl.java:1507)

  at oracle.adf.model.dcframe.DataControlFrameImpl.findDataControl(DataControlFrameImpl.java:1467)

  at oracle.adf.model.BindingContext.internalFindDataControl(BindingContext.java:1261)

  at oracle.adf.model.BindingContext.get(BindingContext.java:1211)

  at oracle.adf.model.dcframe.DataControlFrameImpl.restoreDataControl(DataControlFrameImpl.java:953)

  at oracle.adf.model.dcframe.DataControlFrameImpl.restoreSnapshot(DataControlFrameImpl.java:1022)

  at oracle.adf.model.BindingContext.restoreSnapshot(BindingContext.java:766)

  at oracle.adf.model.BindingContext.beginRequest(BindingContext.java:1876)

  at oracle.adf.model.BindingRequestHandler.invokeBeginRequest(BindingRequestHandler.java:396)

  at oracle.adf.model.BindingRequestHandler.beginRequest(BindingRequestHandler.java:261)

  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:203)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:131)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:447)

  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:447)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)

  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

  at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:181)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

  at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:293)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  I found a bug " ", "(12564061" related to this error and it asks me to check if the oracle.jbo.usemdm property is set to true or not and check if there are dependencies defined in the associated principal object. The property is already set to true and it is y no dependency attribute defined in the enitity object. Could you please help?

  Your case root:

  java.lang.IllegalArgumentException: no oracle.jbo.AttributeDependency$ class const enum Type.

  This means that your java implementation line is corrupt.

  Try to remove your current line Impl, then expose it again.

• exception that tells which line causes error

  Hi all

  my need is to add exception to my procedure.

  Yes, I know how to do it. But he said only "ORA" error and I would also like to know what line number causes error.

  The procedure is huge...

  So is it possible at all?

  Marco wrote:

  The procedure is huge...

  Yes, but with different operations to meet business requirements, not with the number of lines. For this you must connect before and after each transaction in the table of the newspaper or by registration method of dml errors. So that you can have a successful execution of the transaction after what a better idea, the error took place and was not connected there after.

  Yes to verify line number, you can consult the following exceptions in oracle 10 g .

  Thank you!

• DateField as itemrender causes Error #1034: Type coercion failed: cannot convert '10/03/2006.

  I have itemrende onliner.

  < mx:DataGridColumn dataField = "solddate."
  headerText = "Date".
  itemRenderer = "mx.controls.DateField"
  rendererIsEditor = "true".
  editorDataField = "selectedDate" / >

  XML =

  < solddate > 10/03/2006 < / solddate >

  This translates

  DateField as itemrender causes Error #1034: Type coercion failed: cannot convert ' 10/03/2006' in Date.

  Is it possible for me to be

  1. change the output xml to the required format

  or

  2 convert the data within the itemrenderer

  The answer is here http://blog.flexmonkeypatches.com/2008/04/08/datefield-itemeditor-when-date-is-a-string/comment-page-1/
  
  or you can do it inline like
  
  DataGridColumn headerText="Date"                   editable="true"                    rendererIsEditor="true">                              DateField selectedDate="{new Date(Date.parse(data.@solddate as String))}"/>                                               DataGridColumn>