64 bit I don't no-interface works guard pushing 64-bit
Try to download the 32-bit version
Please let me know what OS are you using.
Illustrator CS6 supports Windows 32 - bit and 64 - bit OS, but supports 64-bit only for Mac OS operating systems. Refer to the Illustrator CS6 system requirements to make sure that your computer meets the minimum requirements.
Tags: Adobe
Similar Questions
-
When I had the previous version of bit torrent, I had no problem at all, I downloaded the latest version of 721 and it has not worked since what can be done to get it working?
I just downloaded and installed IT - no problem.
Make sure that the firewall is not trying to block it.
-
HP Pavilion Volume Touch-Pad don't DO NOT WORK. NO SOUND
HP Pavilion Volume Touch-Pad don't DO NOT WORK
I have a HP Pavilion dv3t - 2000, Windows Vista-based computer.
Touchpad volume above, that the keyboard does not work properly (it there is no sound coming out of the speakers or the headphones), if you touch the part above the keyboard touchpad megaphone, then it remains red, but the sound icon on the taskbar change mute to reactivated when you touch the Red megaphone. The volume on the touchpad slider works amazingly.
I don't know if I uninstalled something or what but I need this fixed a problem!
Thank you!
Hello
Pretty well, I waited the Audio service to miss because it is installed by the IDT program, but other services were in the correct state?
Try a manual update to the generic Windows driver.
Open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the IDT device and select Properties. Click the driver tab and click Update driver. Select "Browse my computer for driver software", then "Let Me pick from a list of drivers for devices on my computer. Left click to access high definition Audio Device to highlight, and then click Next.
Did this install without error and you get any sound?
Kind regards
DP - K
-
Problem XML tutorials online don't seam to work
Hello
I'm totally new to actionscript (barely able to configure the IDE for Linux).
I have trouble parsing an xml file containing namespaces. All the tutorials and samples that I found online do not work for me.
the file looks like this:
[CODE] < modsCollection xsi: schemaLocation = "link1 link2" >
< version mods = "3.2" xsi: schemaLocation = "link1 link2" >
< authority type = 'diva' type = "contentTypeCode" > refereed < / Type > < kind authority = 'Park' type = "contentType" > Ref < / Type >
< authority type = 'diva' type = "contentType" lang = "fr" > with reading Committee < / Type >
...
...
< / mods >
< / modsCollection >
[/ CODE]
While I have tried several tutorials online codes, but they don't seam to work. NOTE: I can't trace command work on my Ubuntu machine, so I use a label txt to the release of the results. Any help would be welcome. Looks like stop programs running in myXML [CODE] = new XML (e.target.data); Line [/ code]. Normally, it will display all the contents of the xml file once I have remove all spaces in the file names.
[CODE]
package
{
import flash.display.Sprite;
import flash.events.Event;
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.text.TextField;
import flash.text.engine.ContentElement;
import flash.utils.flash_proxy;
[SWF (width = "1000", height = "700")]
SerializableAttribute public class PubVis extends Sprite
{
private var txtBox:TextField = new TextField();
var myXML:XML;
var myLoader:URLLoader = new URLLoader();
public void PubVis()
{
txtBox.text = ":");
txtBox.width = 900;
txtBox.height = 700;
this.addChild (txtBox);
var divaURL:String;
divaURL = "new.xml".
ReadData (divaURL);
}
public void ReadData(url:String)
{
myLoader.load (new URLRequest (url));
myLoader.addEventListener (Event.COMPLETE, processXML);
}
function processXML(e:Event):void {}
myXML = new XML (e.target.data);
txtBox.text = myXML;
var schemaLocationNS:Namespace is new Namespace ("schemaLocation", "link1 link2");.
default xml namespace = schemaLocationNS;
myXML.addNamespace (schemaLocationNS);
var str:String = "";
for (var xmlNode:XML() in myXML.children ())
Str = str + "/" t + xmlNode.
txtBox.text = myXML;
trace (myXML);
}
}
} [/ CODE]
'xsi' namespace is not declared in your xml code. for example:
var xml:XML =http://example.org/schema"> refereed ref Refereed ;default xml namespace = new Namespace("xsi", "http://example.org/schema");trace(xml.modsCollection.@schemaLocation);// trace// link1 link2--
Kenneth Kawamoto
-
Installed Windows & 32 Bit drivers and USB ports don't DO NOT WORK.
I bugh a laptop HP Pavillion 14 TS who came to preinstall Windows 8.1 64-bit I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem. None of my network drivers work and 2 uSB ports where I plug in my mouse and other devices of SB to do more work.
I did a back up of the established SW leader who has all the HP dvers for my laptop but will not install the network and video of divers. And when I try to install the drives, I get the error message saying that they are not compatible with this version of Windows.
I loked on the HP site under my model of laptop that s as above, but HP don't do my notebook drivers for Windows 7 32. And I looked on both the Realteck site for network wireless Realteck and Ethernet Realteck drivers but none of them work or install on my OS. Intel video drivers do not work either. So I'm really stuck one I can not return to 8.1 Windows as if that 32-bit Windows 7 works on my laptop but most of my drivers is not compatible with the operating system and I don't want not to install 64-bit Windows, I like 32-bit.
Drivers that do not work on Windows 7 32-bit are:
Realteck RTL8188EE 802 - 11 b/gn witeless lan
Die Ethernet Realteck and
Intel High definition graphics driver
That don't work at all under Windows 7 32 bit because they are the only 64-bit drivers.
So can you please post me a link network bth and drvers of graphics from Intel that works with my laptop. I tried many different drivers Realteck and raphics for Windows 7, but none of them DOES not work on my system. And none of my USB ports are no longer works. So, how can I fix this?
Hello:
Should be no problem to get W7 32 bit to work on this model.
Just use all the drivers and software from the HP Probook 450 G0 on your model, except the Audio, BIOS and firmware files.
Your model uses only the Intel HD graphics driver.
The first pilot, you need to install the Intel chipset installation utility and reboot.
Audio: Accept the agreement. Download and install the driver first on the list.
If for some reason, this model Intel HD graphics driver does not work, use this one...
https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23713
-
Web interface works is not the well-known address of management
TLDR:
- opening webinterface on ip management group-> does not work / ping
- opening webinterface on eql management ip-> works
- opening webinterface on ip management group-> suddenly done work
- Why?
Yesterday I've updated SanHQ of 2.2 to 3.0.1 to prepare to run the path to upgrade to FW 7.x. Since yesterday, I get the following warning:
[ID: 1.6] The eql-grp01 group has been added using non well known address (MWKA). Delete and add the group using the well-known address of management of group 172.16.0.9.
The eql-grp01 group contains a single EQL (eql01 / 172.16.3.15) and has a dedicated management port. The beach is a 16, as such, both the IP and IP management EQL management group are in the same network (again).
I'm able to reach the Web interface of eql01 on 172.16.3.15 without problems for years. Try to reach the Web interface on 172.16.0.9 has always given problems (timeout, ping works however) until I asked the Web interface on 172.16.3.15, after that, I can reach the Web interface without problems on 172.16.0.9.
Up until now I did not worth to look into it, but as I'll be add another Member to the group within a few weeks and SanHQ's "tenacious" on do not use well-known management IP address I have tought I might give it a try here, maybe it's the behavior?
Edit: Adjusted the subject as non-MWKA does not work but the MWKA (submits sugested otherwise)
OK, you need remove the SANHQ and add in it through the Well Known management address.
I don't know why he first had to go to the Member port Mgmt vs being able to use the IP alias for group management.
That's all the management IP address is, like the IP address of the ISCSI discovery. It is a superior a physical port IP alias. So if you can reach the Member IP address, you will have no problem reaching the alias.
Maybe something on your network, or the ARP table has not been updated.
-
as 32 LDP loopback interface work
HI guys
why we need dos interface loop so that / 32 mask LDP work
Thank you
Hello, Ibrahim.
LDP can also work with no/32 mask on telesignalisations but when the IGP's OSPF in a loopback configuration that must be
int loop0
IP ospf network point
Only in this way OSPF announces the subnet mask true of the loop. By default, OSPF recognizes a loopback and announced only a host 32 route.
However, the real reason why we use / 32 telesignalisations on networks of service providers is another and saving address space.
The only sense of the loopback address must represent the single node/p PE in the IGP and the MPLS network.
To host 32 channels are enough.
Also the use of 32 telesignalisations allow you to select a block of specific address for all current and future network nodes.
In large provider networks MPLS LDP is implemented with label filtering: This means that labels are allocated and announced only for loopback addresses (thanks to the fact that they are / 32 belonging to the same address space).
This is done for scalability, in order to avoid affecting MPLS labels to prefixes not loopback IP.
In these networks of suppliers all users associated prefixes either in a form of VPN (L3 or L2) or simply routed on the global routing table is announced by MP BGP internally.
By induction that the BGP next hop is solved by an LSP with a destination = distance PE loopback.
If indeed the ultimate reason to use 32 telesignalisations is scalability.
Hope to help
Giuseppe
-
Why don't these CD works on all devices?
About a week or two ago I installed this mp3 converter add-on. I had a few CD R had been for a year or two laying around and decided to burn CDs of music converter worked very well. I have played on my computer and in the car. Last week I went and bought a pack of ten of the same CD and burned 4 disks only to find out that they would play only on the computer but not in the car. Thinking that something might be tweaked with the discs I bought another pack of a different MFG to get the same result-will not play in car.
This really annoyed me. I don't see why these new discs play only on computer and not in the car.
Someone already has this problem and if yes was a way to fix it?
Thank youSorry, not a Firefox support question.
Try a support forum for your brand of software "burner" or a forum dealing with record to CDR media.
-
Firefox is already running but is not responding? Simple answers don't seem to work
I started Firefox earlier today and received a message about a problem with Firefox and he had to be reset. Because the other option seemed worse than the reset, and Firefox Reseting seemed relatively painless, I clicked OK. A short message popped up on the registration of passwords, bookmarks, etc. with success. Then a small window pops up, saying it was cleaning of Firefox. While the process seemed to freeze. I liquidated it, killed at any process of firefox running and attempted to restart Firefox, when I received the message "Firefox is already running, but does not." There is a folder on my desktop labeled 'old Firefox data' which I assume is from Firefox reset (it is also now a copy of the profile on my desk, just in case).
https://support.Mozilla.org/en-us/KB/Firefox-already-running-not-responding
I found this and tried to work through it, but it doesn't seem to help.
(1) Ther' are no Firefox.exe in my task manager, nor is there a process plugin-container.
(2) I deleted the file "parent.lock" in both the profile (which is just a bunch of jumbled letters and numbers with 'default' in it) and the record of the old Firefox. However, these files were just "parent.lock" not "parent.lock.parentlock".
(3) did not change the name on it, so unless the reset did before she locked herself, I don't know what to change it to.
(4) it is not a file share, so...
(5) this could be a possibility. The folder of Firefox that my profile is 'Read only' is, but I can't not to change cela. Everytime I go in, turn off the 'Read only' option and tell him to propagate the change through subfolders, it seems to work, but when I check the properties 10 seconds later, 'Read Only' is checked again.
Sounds that the profiles.ini was corrupted when you remove the old default profile and adding the new profile.
You can have security software that preventing to change the Firefox file.
You use the Profile Manager to restore an existing profile or create a new profile.
A "Reset" creates a new default profile with a timestamp attached and is trying to import some settings of the old profile, leaving the old profile intact, including the (invalid) cache folder (topic: cache) can take up to 1 GB.
Versions of Firefox 15 + will move the old profile folder "old Firefox Data-#" folder on the desktop that gets a figure if you use reset several times, so you can no longer use the Profile Manager to return to the old profile.
See also:
-
Upgrading from MS done my wireless keyboard work correctly
MS installed an update on my machine, don't know that one right now, but the update resulting caused my (MS Wireless Keyboard 6000 v2) wireless keyboard stop working properly. I replaced the batteries, went through all the basic troubleshooting steps without consistent success. A few things authorized feature intermittent but nothing solved the real problem. The symptoms are: intermittent connectivity, typing errors (IE if I input 0 exit is entered or 0 j out ;) constant output without entry jl (that is, if I get a browser open, sometimes it will boot just out of a string of 1 in the scope of available data).) A few times the mouse failed. But especially the keyboard. Thanks in advance.
Hello
Step 1: Check the updates installed in the history of the update and send back the same.
1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.Step 2: Run the fix it tool to the article below and check out them.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/Step 3: Check if the article helps you fix this problem.
Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398 -
If I don't use that works I need to install Office are there updates to the common files, I need
From the Internet, I received several updates of Office files with 'security update' in the name of the file. I don't have room to keep loading these updates, if I don't need them for other programs to work properly
Hi nancymosley,
Works updates appear sometimes as Office updates. If you do not have Office installed, then the automatic update feature should not offer updates for Office - but if you have installed works, it will offer to those that apply to the works. If you wish, you can learn more about the update before installing it (and it should tell you whether it applies to works or office and what it does); However, if they apply to the works and updates of security you really have to install them to your system's security. If this is the case and you have doubts about a particular update, after the name and the number here and we'll see if we can help determine you if it is necessary for the work.
If you have not installed Office but simply do not use it, then you will receive updates for Office as well as works. If you do not have an office, to avoid this problem I suggest you uninstall Office (all versions you have installed) and who can fix the problem (except as noted above). If you want to have something like office works also available "in case", then after you have uninstalled Office, ask the free OpenOffice www.openoffice.org and you will be covered and will not get not the Microsoft updates specifically for the office. This release also lots of space on your disk space seems to be a matter of concern.
Although it is extremely unlikely for a security issue to occur through office if you are not using Office and it is just installed, it is remotely possible (but very, very unlikely-, I'm almost tempted to say it wouldn't happen). But if you never use it, then you can cause problems without these updates installed. If really, you do not want to install the updates and want to stay safe, and are certain that you do not use Office (if you decide to do, then you will need to install all updates before you do anyway to avoid security problems and other), then I highly recommend that uninstall you it simply. I guess you have discs re - install if you ever decide that you need. If not, then you can always still use (install if you don't have it already) the free OpenOffice which covers most of the common programs of office (with the exception of Outlook).
I hope this helps.
Good luck!
-
PHOTO AND VIDEO CAMERA device blackBerry smartphones don't DO NOT WORK
Few days back now, I click on the camera icon but could open, then a message (could not start the camera. Close other applications and try opening the camera again) I have applications and close their still camera. Can anyone help to proffer solution to allow the use of the camera to take pictures.
LexiMorgan wrote:
My phone did the same thing. Help, pleaseHello
As a result, then everything already posted in this thread applies to you. Please:
- Read this thread
- Try what it says and report with specific results
- If those don't work, then answer the questions that appear in the messages before
See you soon!
-
Don t lightbox Widget work more in Safari
I made this site with Adobe Muse 2014 and work perfect in all browsers and Mobile, but with updated 2015 Don t work in Safari. Is a jQuery Widget www.soloestudioaudio.com
If you are referring to video vimeo then we are already working on that.
We will inform you on the same thread.
Thank you
Sanjit
-
Why don't PIVOT clause works with aggregate TRIP of 11g function?
Hi all!
I'm really confused as to what is considered an aggregate function in the context of the PIVOT clause in 11 g.
I've been playing with a lot of things related to collections lately and it took birth in an aside:
At this point, I'm sure we can all agree that the applicationCREATE TABLE TEST_COLL ( NODE_ID VARCHAR2(15 CHAR) NOT NULL, NODE_VALUE VARCHAR2(45 CHAR) NOT NULL, NODE_LEVEL NUMBER(1) NOT NULL ); CREATE OR REPLACE TYPE TREE_NODE AS OBJECT ( NODE_KEY VARCHAR2( 15 CHAR), NODE_NAME VARCHAR2(127 CHAR) ); CREATE OR REPLACE TYPE TREE_NODES AS TABLE OF TREE_NODE NOT NULL;
perfectly valid is that the function of COLLECTION is an aggregation function according to the [Official Documentation | http://docs.oracle.com/cd/E11882_01/server.112/e10592/functions031.htm#i1271564]SELECT NODE_LEVEL, CAST(COLLECT(TREE_NODE(NODE_ID, NODE_VALUE)) AS TREE_NODES) AS NODES FROM TEST_COLL GROUP BY NODE_LEVEL;
But then, one of the two following queries should work
Yet, these two withSELECT CAST(REGION_NODES AS TREE_NODES) AS REGIONS, CAST(DEPARTMENT_NODES AS TREE_NODES) AS DEPARTMENTS, CAST(AREA_NODES AS TREE_NODES) AS AREAS, CAST(CENTRE_NODES AS TREE_NODES) AS CENTRES FROM (SELECT NODE_LEVEL, TREE_NODE(NODE_ID, NODE_VALUE) AS NODE FROM TREE_COLL ) PIVOT (COLLECT(NODE) FOR NODE_LEVEL IN (1 AS REGION_NODES, 2 AS DEPARTMENT_NODES, 3 AS AREA_NODES, 4 AS CENTRE_NODES ) ); or (better) SELECT REGION_NODES AS REGIONS, DEPARTMENT_NODES AS DEPARTMENTS, AREA_NODES AS AREAS, CENTRE_NODES AS CENTRES FROM (SELECT NODE_LEVEL, TREE_NODE(NODE_ID, NODE_VALUE) AS NODE FROM TREE_COLL ) PIVOT (CAST(COLLECT(NODE) AS TREE_NODES) FOR NODE_LEVEL IN (1 AS REGION_NODES, 2 AS DEPARTMENT_NODES, 3 AS AREA_NODES, 4 AS CENTRE_NODES ) );
Study further, I found the same behavior when you use the aggregate function in the PIVOT XMLAGG clause.ORA-56902: expect aggregate function inside pivot operation
Is this normal? And if this is the case, is there another way to get the result that I expected?
My version is
Thanks in advanceSQL> SELECT BANNER FROM V$VERSION; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for 64-bit Windows: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production
Best regards
PhilippeMost likely a bug. But you can work around it by using any other aggregate for this group is composed of a single line and apply collect a rotated value. Yes, the cost is double aggregation. And also there is another cost - you must create the service card member other aggreations such as MAX/MIN, etc. will not work:
CREATE OR REPLACE TYPE TREE_NODE AS OBJECT ( NODE_KEY VARCHAR2( 15 CHAR), NODE_NAME VARCHAR2(127 CHAR), map member function f return varchar2 ) / Type created. CREATE OR REPLACE TYPE BODY TREE_NODE AS map member function f return varchar2 is begin return NODE_NAME; end f; end; / Type body created. CREATE OR REPLACE TYPE TREE_NODES AS TABLE OF TREE_NODE NOT NULL / Type created. SQL> select * 2 from test_coll 3 / NODE_ID NODE_VALUE NODE_LEVEL ------- ---------- ---------- 1 A 1 2 B 2 3 C 3 4 D 4 5 E 1 6 F 2 7 G 3 8 H 4 8 rows selected. SQL>Now:
SELECT CAST(COLLECT(REGION_NODES) AS TREE_NODES) AS REGIONS, CAST(COLLECT(DEPARTMENT_NODES) AS TREE_NODES) AS DEPARTMENTS, CAST(COLLECT(AREA_NODES) AS TREE_NODES) AS AREAS, CAST(COLLECT(CENTRE_NODES) AS TREE_NODES) AS CENTRES FROM ( SELECT ROWID RID, NODE_LEVEL, TREE_NODE(NODE_ID, NODE_VALUE) AS NODE FROM TEST_COLL ) PIVOT (MAX(NODE) FOR NODE_LEVEL IN ( 1 AS REGION_NODES, 2 AS DEPARTMENT_NODES, 3 AS AREA_NODES, 4 AS CENTRE_NODES ) ) / REGIONS(NODE_KEY, NODE_NAME) DEPARTMENTS(NODE_KEY, NODE_NAME) AREAS(NODE_KEY, NODE_NAME) CENTRES(NODE_KEY, NODE_NAME) ---------------------------------------------------- ---------------------------------------------------- ---------------------------------------------------- ---------------------------------------------------- TREE_NODES(TREE_NODE('1', 'A'), TREE_NODE('5', 'E')) TREE_NODES(TREE_NODE('6', 'F'), TREE_NODE('2', 'B')) TREE_NODES(TREE_NODE('7', 'G'), TREE_NODE('3', 'C')) TREE_NODES(TREE_NODE('8', 'H'), TREE_NODE('4', 'D')) SQL>SY.
-
Ethernet port doesn't work - posted the solution don't DO NOT WORK
All of a sudden my Ethernet connector on the iMac has stopped working. It is NOT the cable, as I plugged into another computer and the other computer connected without problem. I did the fix published on the pages of mac support trying to update the Configuration data of the kernel Extension Incompatible. The support position familiar updated to version 3.8, but mine is version 2.13. I did the fix explicitly four times, and I still have no Ethernet connection. WiFi is fine. Yes, I restarted everything. Nada. Help!
I'm on Mac v10.11.6
Hi, so he worked before in 10.11.6?
What is the exact name of this extension?
Recently storms in your area?
Maybe you are looking for
-
A new YouTube-Apple TV question that has not been requested here!
A few years ago, I bought 2 apple TV. One of them I gave to my daughter and her husband and I kept. As everyone knows, who has more AppleTV, earlier, YouTube has been removed. We found that it was because Google has changed the app so that it o
-
3 digital inputs for the structure of the case
I'm in the early stages of development a VI that will monitor 3 digital input lines. Only a single digital input will be active at any time. For each digital input, a VI runs under different. Currently, I use 3 structures distinct case (attached). I
-
Could not find a way to correct the problem. Need help.
-
no configuration administrator when configuring the computer
laptop HP envy using windows8 I do not set up the administrator when configuring the computer. How can I configure an administrator now?
-
trying to set up email through craigslist, says I can't use hotmail, can you help me?
Im trying to repond to ads on craigslist, and when I toast on the link, email appears, I filled out my info, and when I send it, I'll wonder a name, then by e-mail, and when I get hot mail, he said hotmail is not supported