64-bit question

Similar Questions

• JRE Oracle Solaris SPARC 64-bit question

  Operating system: Solaris sparc 10u9

  I recently upgraded to 1.7.0_45 java runtime environment and I have encountered a few problems.

  So far, the usual approach to get a 64-bit JRE was to replace the bin files / with the 64-bit package (given that the 64-bit package depends on the 32-bit one)
  But in trying to do the same thing with jre 1.7.0_45, problems began to occur.

  After further research, I noticed that the java executable has the runpath has changed and so it cannot find the necessary libjli.so

  (Before 1.7.0_45, the java executable contained 3 runpaths to cover all the test cases)

  Any suggestions on how to deal with the situation? Just to note, changing the JAVA_HOME is not an option because it is referenced more than a hundred times, so it would be rather impossible...

  Looking forward to any suggestions.

  I came to a pretty rough resolution, but it is the only work so far - symbolic links.

  The resolution is the following:

  (1) delete all files(not the sparcv9 directory) in bin /.
  (2) create symbolic links in bin / that link to the contents of bin/sparcv9 /.
  (3) be careful when extracting the jre - zip/copy different agents (such as ants, etc.) have different implementations of the respective functions. For best results, use the native tools of the OS (cp, unzip).

  PS: I write mainly for users who encounter the same problem. The question is still open, because there might be a better solution.

• Backup Windows 7 Pro 64-bit question

  Hi all

  I know there are a lot of posts on this subject, however, I want to use a backup program to back up only the My Documents folder. I store everything in that folder that I'm working on. Programs and other things is in the correct places [programs or program etc. (86)...]

  I find too complicated MS backup utility. From my reading, I understand that my best solution is to make a system image backup and perform differential backups, depending on the needs. In this way, if the player C goes down, I can replace, load the image backup and the most recent differential backup, and I should be fine.

  Other information: I wish only to back up the files that have been modified in the folder My Documents, (as mentioned) because that's where I do all my work. Can anyone recommend a very good third party (preferably free) for this program? Thank you very much.

  -Lee

  IMHO, it's tremendous overkill, unless you are a bank or a company of backup of a system of accounting or inventory.  For regular users, 2 or 3 is a lot.  My personal habit is once a month backup.

  If you are about to buy an external hard drive, consider these questions:

  Many of them actually Cook themselves because they have inadequate ventilation.  They can only practically be used for short periods of time.   So look for one with a big deal.

  Children have the 2.5 format disks "that are normally installed in laptops.  They are much more delicate and less reliable.  I would go for a bigger 3.5 because you don't need portability, and they are more reliable and last longer.

  My favorite way to do it is to buy an external hard drive enclosure - they rest well best.  For example:

  VANTEC NexStar3 (NST - 366 S 3 - SV) 3.5 "SATA III 6 Gbp/s USB 3.0 external HARD drive enclosure Silver Aluminum

  Can buy you a type HD 3.5 OEM of any size you choose.  2 TB is a very reasonable price.  It has its own power supply and tends to be aired much better.

  Also make sure that you get one that is capable, able size drive you buy and has a USB 3.0 cable that comes with it - they are different cables USB 2 USB 3.

  Do not use an SSD for this function.

• Windows XP 32-bit to Windows 7 64 Bit question

  In the case of enlargement, I can't click setup.exe because it is not a valid win32 application. I use the student edition, but I ordered the CD, which should arrive next week. Is it possible that I can get around this or should I wait for the next CD?

  I went from 32-bit XP to W7 64-bit, but to do that I had to start from the disc (created an iso using instructions on one of the other threads here) and choose "custom" installation.  You can try to do the same thing or just wait until you get the disk by mail.  You can not run the setup.exe from WinXP because the 32 - bit vs. 64-bit, and when installing Win7 you cannot select 'upgrade', you have to select "custom".

• Photoshop CS6 extended 64-bit - question of clipping histogram

  CS6 clips the histogram (black and white) when reducing a large TIFF 16-bit 7000px file we will tell 1280px wide. CS5 does not work using the same steps. Windows 7 ultimate 64 bit - I7-24 GB of RAM.

  Someone had this problem? Is there a setting in CS6 to change the reduction algorithm (binning, bicubic or other) that uses CS5?

  The default CS6 of automatic Bicubic factory causes Bicubic Sharper and bicubic smoother by reducing and increasing the number of pixels, respectively. Sharper tends to create halos hideous oversharpening (where the break in the histogram), but, Hey, Adobe says that is the best [rolls eyes].

  Change the default to plain bicubic resampling in Preferences > general.

  Note that the mode of transformation of the CS6 independent resampling in Options bar control when a raster layer is targeted. The default value which is automatic bicubic so you will probably want to set it to simple bicubic, too.

• complicated bit question

  Hello

  so I had the coordinates, for example A (4.5); B (3,2); C (1.9), D (4.3). I need to order them in ascending order after the last digital character so that they remain together. I mean: B (3,2), (4.3) D, A (4,5), C (1.9).

  Any idea?

  Thanks for all replies.

  johnsold wrote:

  Thomas,

  Make a cluster of three elements: [y, x, letter], where y and x are the numerical coordinates and letter is a string with the names of the points.  These clusters in a table and use table sorting.  By firstly putting y in the cluster as Thoric said, you get the kind on this component.

  Lynn

  ... and in the case of the two values of being the same, the tiebreaker is the second element of the cluster (X).

  Ben

• Program of 64-bit Windows 7 not install 32 - bit

  Original title:

  Windows 7 64 bit

  Hey everybody:

  I recently got new computer Windows 7 (64 bit) I need to install the prog. It wont let me because as TI (32-bit) prog.

  Yes I right-click, I am admin and Yes tried to install compatibility, run as.    Well can't seem to get anything to work.

  The program is very cool to replace him as (64-bit) Question is their a program that will install 32-bit?

  Thank you

  Jay

  It won't hurt to run in 32-bit mode. The software must not offer a mode 64-bit as well.

• as additional storage mSATA SSD

  Hi all

  I have a touchsmart Envy 15-j003ed E4A07EA #ABH with a 4700mq I7, HP mainboard 1963.

  The laptop came with a rather slow disk 5400 RPM. I changed this to a Kingston Hyper X 120 GB SSD sata 3. Which works very well. However, I would like to have some more space on board. Also only 4 GB of ram is installed I would spend it.  Related to it have 3 questions:

  (1) can I put a 120 GB or more in the slot msata SSD and use it as an extra hard drive? Not as a cache or almost...

  (2) or that it will be fast to do the startup disk msata ssd and use my current SSD storage?

  3) associated with the RAM, the specs give 1600 mhz speed, but the site of Kingston gives 1866 mhz as on option for the replacement, I use 1866 mhz?

  Thank you very much in advance for your answer!

  Yes, you can install a card from the WSSD in the slot mSATA for additional storage, but if you think that you can pick up just a larger SSD standard for less money extra. mSSDs have not yet appreciated the fall of wholesale prices we are seeing on 2.5-inch SSD. The WSSD cannot be a boot disc if you also have a standard 2.5-inch drive in the machine, which would be faster is a bit questionable. If possible, a WSSD would be a bit faster, but both are fast, it isn't a big deal.

  Here is the Service Manual:

  Manual

  See page 44 for instructions of the WSSD.

  The memory just be sure you get 1.35 volts or DDR3L memory. The manual says that it runs at 1600 mhz, so if you install the variety of 1866 he will just downclock.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• structure of unexpected behavior

  An excerpt (2009) who does not behave as I hope it is attached. You can try to type an entry in the control that is not in the menu dropdown, and then click Exit. There will be no visible entry in the control, but the structure of the event is still running. Should it? I had to add code to a VI to take account of the case of the event running even if there was no entry in the control.

  Firstly, the delay in the loop is not necessary with the structure of the event. The structure of the event will not use time CPU unless there is an event.

  With regard to the "change of value", it is a bit questionable. Technically, there is a change in value. It's just that the value of the control is changed twice. Once to receive the letter unauthorized, and then again when the restriction of upper level says 'no-no' and he transforms back. I don't know how the event is generated, because this would be in the bowels of the generating code of the events that we have no visibility.

• Driver for Aspire 521 E5 problems

  Model: Aspire E5 - 521
  (UEFI) BIOS version: ATI VGA VER015.042.000.002.000000
  Windows operating system of origin: 8.1
  New operating system: Windows 7 64 bit
  Question type: Could not find Chipset Device Driver PCI, PCI encryption/decryption controller, SM Bus controller and USB controller.

  Hi guys! I bought this camera last week, and it was a bit slow for me. Thinking it could be the OS, I changed it to Windows 7 64 bit, which is currently installed now. I had problems to find the drivers for it. I used the drivers found here: http://us.acer.com/ac/en/US/content/drivers but I noticed that 'Operating System' told ' 8.1 64-bit Windows.

  Yet, I used these drivers listed there. However, after installing the drivers, I still see yellow-exclamation on the following points:
  -PCI device
  -PCI encryption/decryption controller
  -SM Bus controller, and
  -Controllers of Bus USB universal

  I also noticed that my machine is still sluggish after installing the drivers from this page, I really hope you can help me on what I've been struggling since yesterday thank you in advance.

  Open Manager devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  When you see the yellow exclamation point, double click it, choose the "Details" tab, in the menu choose "HardwareIDs", click on the first string and copy/paste here.

• A Windows 7 Install Cleanup Utility exist?

  I want to clean the last attempts to install Itunes before I try again.  It seems that there finally is a 64-bit version of Itunes available and I know that previous attempts have probably left the residue of software from my previous attempts, so I would delete these files, then try again.

  The related "Download itunes for Windows 7 64 bit" question leads to:

  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/a26b8f76-83bb-4153-A1F5-769b18e1b0a1/

  who does not work for Windows 7.

  Windows Installer Cleanup utility is more supported by Microsoft (http://support.microsoft.com/kb/290301 )

  After cleaning, you can use Revo Uninstaller that does a really good job.

  Also see this article to remove iTunes completely from your PC:

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  See you soon! "That's all a pension chequer nights and days,"
  Where destiny with men for pieces plays;
  Here and there, mates and kills.

  In a world without walls and fences, who needs windows and doors? Life sucks! Getting used to!

• My co-workers on XP cannot open my files in Win 7.

  I have upgraded to Win 7 (64 bit) for XP and my co-workers are still on XP (32 bit) and now they are unable to open the files of my project and access. Our IT Department States that it is a 64 vs 32 bit question and what I do I save my files to a later version.  I did it and it work from time to time but is not reliable.  What are my alternatives or the best way to solve this problem?

  I regularly use my Windows 7 x 64 for Office 2007 Access [accdb], Excel & Word files that I then read on my WinXP Office 2007 without any problem.

  Therefore, I would say that your problem could be linked to the difference in versions of Office you & your colleagues.  I think your first check should be to check your help to access for saving the files for use earlier versions of Access or similar.

  You can get more help in the forum of the community of MS Office for your version of Office & theirs.

• Cannot send after effects Comp in Quicktime, Lossless

  Hello

  I'm doing a simple test using co-pilots optical flares video animation, a PSD file imported from lettering and JPG of a background image.

  Here is the error I get:

  

  And here are my settings:

  

  I tried a few other settings and make the file but there is a large green space, as if it were an interlaced image. I turned off rendering of the fields (then, same thing)

  I use an iMac 3.06 GHz with 4 GB of RAM and After Effects CS5.5.

  Any help would be GREATLY appreciated.

  Three things come to mind immediately:

  You can use a different application than AE to convert this video Copilot to something like PNG Quicktime codec.  Some of these files of flare andrew Kramer does are a bit questionable, sad to say.

  You must NEVER, NEVER use multiprocessing (aka "made simultaneous multiple images") in AE because you have anywhere near enough memory to operate.  Just turn it off and leave it off.

  Similarly, you must never use accelerated Open GL in AE.  Employees of Adobe not to use Open GL when they make, and you shouldn't, either.

• Have to install the CAD Client AND the server software on the Windows Client computer

  Hello
  
  I have a problem during the installation of the customer Oracle Data Warehouse Administration Console (DAC) on my Windows x 86 client computer.
  
  Architecture
  
  Applications server - A Machine (Informatica 8.6.0 + fix 4.0 & DAC 10.1.3.4.1 services) = Linux RHEL 64-bit
  Basis of data server - Machine B (application Oracle BI OBAW data warehouse) = Linux RHEL 64-bit
  Client - Machine C (BI Apps 7.9.6 + Informatica customer customer 8.6.0 CAD) = Windows x 86 32 bit)
  
  Question
  
  I had planned to install ONLY the DAC 10.1.3.4.1 customer on my 32-bit x 86 Windows client machine, as the CAD 10.1.3.4.1 server must be installed on Linux which is installed the Informatica PowerCentre 8.6.0 server application layer.
  
  However, when I run the Oracle Universal Installer, installation options are greyed out and I have to install the Client and server products.
  
  I don't want to do that. Why am I made to install both? Is there a solution?
  
  Any help or suggestions are greatly appreciated.
  
  Have a great day.
  
  Kind regards
  Gary

  Customer installation support DAC only on Windows is to copy the executable files of the area where you installed CAD using the Installer (say another windows box).

  If you install the CAD by using the Setup program on the area where you don't want the client of the DAC, it will also install server DAC. In this case, your client DAC can be confused to
  connect to the local server of DAC, so better avoid to install DAC and copy the executable files for the client computer DAC. Customer of the DAC must also the odbc14.jar and Informatica customer files
  to connect to Informatica.

• Problems updating to version 12.0 question + 64 - bit

  On the first question: my Firefox 11.0 will refresh by 12.0, even when you browse the path "about Firefox-> check updates". I know that the release date for 12.0 was today, so I don't understand what the problem is.

  On the second question: is it true that, since version 13.0, there will be a 64-bit version of Firefox? If so, users will be able to choose to upgrade to 64-bit before the update 12-13?

  Time of release 12 Firefox on demand (subject to change) is 8: HAP to the United States this time has not yet arrived from this response. Adjust right there at your local time.

  • The following link is for the discussion of the contributor only, but you can read only. See-> https://support.mozilla.org/en-US/forums/contributors/708320?last=46338

  The 64-bit version of Firefox may not occur for several months yet. Currently, there is a test at night (14 of Firefox) version, the less stable/secure level and should be installed by users very experienced for the test only. Plugins in 64-bit by third-party developers are still quite rare.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox