64-bit worth it? Problems I should wait?

Similar Questions

• Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?

  Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?
  If I need to can replace it where I get an older version?
  Thank you

  Firefox 4 versions and later, do not run on a PowerPC Mac and require at least OS X 10.5 and an Intel Mac.

  The latest support for your operating system version is 3.6.26 , you are fully updated.

  For more information, see:

  Firefox 3.6 system requirements

  Firefox 10 system requirements

  [For older Mac that are not supported in versions of Firefox 4 +, if you want, try TenFourFox for PowerPC currently running Mac 10.4.11 and 10.5.8]

  http://www.floodgap.com/software/tenfourfox/

  http://tenfourfox.blogspot.com/

  https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Speedepro says I have 536 problems. Should I allow to repair?

  I was told that a line on tune up can cause problems. Should I allow in

  or I can fix it myself. I have no problem operating I can say.

  Hello

  Absolutely not. Too much hype of the system optimizers and registry cleaners will cause problems while setting
  little or nothing. Considered to be snake oil. Uninstall it and be happy, that he went. These 536 questions
  probably not really exist.

  If you have problems, real problems, ask in the Forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  One day computers will be self-healing however we are far from this time.

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Lightroom trial does not say (0xc000007b) is 64-bit free btw. What should I do?

  Lightroom trial does not say (0xc000007b) is 64-bit free btw. What should I do?

  Hi Darcy,

  Please follow the steps mentioned in the article.

  https://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html

  Please post on the Adobe Forums.

• Heating problems Strain Gage; Wait for the function measurement of delay

  Hello

  I am able (using four 350 ohm gauges) of the strain using a NI 9237 module with a cDAQ in connection Full deck Type 3. My test is to measure the strain over long periods of time (~ 10 days). The NI 9237 measure strain at a rate of 2000 Hz (this is the slowest rate). The wheatstone bridge is currently powerd with the NI 9237 of 2.5 V. When I get my data permanently, I see the strain increases with time (which it shouldn't do my test), and I suspect it's because of free heating strain gauges. So, to overcome this problem, I think using "Wait (ms)" and ask the program to obtain data once every 5 min. Five minutes should be more than enough to dissipate any overheating of the gauge.

  My question is: if I use the function 'wait (ms)', is my sensor (extensometer) are constantly under tension during the time-out of 5 minutes? I think that the functions "queue" are used inside a loop to allow a VI to sleep during the prescribed period (correct me if I'm wrong). So, it means that the sensor is not powered during this time?

  Thank you

  SID

  I wouldn't use "wait" function for your timing... software you can use the time elapsed or other timing functions

• try to install Medal of Honor Airborne on 32-bit vista, and problems with the windows firewall starts do not.

  OK, im losing my mind.

  I bought a copy of airborne for my 32 bit vista system and found initially that I had to do a few tricks to install and play it like UN-installing ageia phys-x, it was simple enough. Well I have had since stopped playing it and would try to uninstall without result. I tried to fix it and using "C-cleaner.

  I went down some of the files, but I think that my registry is a little buggy so I tried blocking it with c cleaner, he sure found several errors and fixesd them.

  Well, I'm trying now to re - install MOHA and when I put the disc and click autorun the pre-start games window appears with the usual options, play, upgrade, site Web etc... I hit play, it does nothing. I tried to uninstall it from the disk and to halfway through she said "MOHA has not stopped the Installation Wizard prematurely try again later". I can't repair or uninstall or install. I read somewhere that it is a firewall with windows problem and if I run my firewall victory "which I have never on", this should work if the software is added to the 'green' list on the firewall.

  now I find that I can not get my firewall to start. I researched and found a few forums where people explained to the services command prompt and tried to 'start' several 'order' in there and firewall programs will not start giving me this error-windows cannot start service windows firewall. and the code of error-6801.

  I am a novice to tooling autour under the 'software' hood of PCs. I know a bit about the material and that's it. anyone has any ideas for me? otherwise I'm looking to another disorder vista install, I had a moment difficult, installation of the 1st hour and im not not looking forward to try it again...

  Thanks in advance, has soon - a fool lose his mind...

  Hi rocknerd,.

  You can try to download the Windows Installer Cleanup utility and try to remove the game, and then reinstall it.

  You can read the following article to download the Windows Installer Cleanup utility:

  http://support.Microsoft.com/kb/290301

  1. click on Start , then select all programs

  2. in all programs , click Windows Installer Cleanup; the Windows Installer Clean Up Utility window appears, listing the software currently installed on your computer.

  3. Select the game in the list, then click on Remove. If you have multiple files, delete all the.

  After you run the Windows Installer Cleanup utility try to re install the game and check if it works on your computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Scanjet 5590: HP Scanjet 5590 10 64-bit Windows driver problems

  The driver for the 5590 Scanjet under 64-bit Windows 10 has caused me a lot of trouble. I installed, reinstalled and done everything I can think of to make it work. The pilot must main installation problems or it will just say that the material cannot be found. It becomes very frustrating because I had a lot of problems with the h p drivers recently. If anyone thinks they have a solution, I would be grateful for feedback. I even tried to run the software on the device when you install the "compatibility mode" to be compatible with Windows Vista. None of the steps worked. I know that the Scanjet is connected and read on my computer because when I run the software to doctor: p and do a scan test, the Scanjet responds perfectly well. It must be a problem with the driver software.

  Hello

  Thank you for using the forum.

  Have you tried the HP scanning and Capture from AiO applications away from the Windows store?

  HP AiO Remote apps

  Follow these steps to get the applications (if it is not already installed):

  1. Go to the Windows store
  2. Search for "HP AiO Remote" apps
  3. Install the apps.
  4. Apps should detect your wireless printer, depending on the applications, there is a function "Scan."
  5. Click the Scan and it will direct allows you to download apps "Scan and capture.
  6. After installation, you should be able to scan.

  Let us know if it works.

  Thank you.

• Windows 7 64 bit VPN client problems

  Hello

  I am running Windows 7 Professional 64 bit and Cisco VPN client 5.0.07.0240. I am able to connect to my corporate network and work ok but connection is very slow!

  Connection time is distributed as follows:

  Client program VPN Opening: 70 seconds.

  Click on connect and wait for the user credentials dialog box: 30 seconds.

  Enter the credentials, and then click ok then 'user authentication': 90 seconds.

  "Negotiate security policies": 60 seconds.

  User area credentials if poster again, re - enter the credentials that the dialog box is empty, and then click ok: 90 seconds.

  "User authentication", then connection established: 120 seconds.

  I have a colleague running 64-bit Windows 7 (ultimate edition) which uses the same version and does not have these problems.

  Any ideas anyone?

  See you soon,.

  Gary

  Gary, thanks for the update. If disabling the firewall and restart vpn service did not help. Could you please try and install the 5.0.07.0290 version?

  Before do you, I would like to know if you import .pcf for the VPN Client files. If so, please try to re-create a file .pcf on the PC and try and use this file to connect. Also, I see that the existing .pcf file you are using is a file read-only. Could you change this and give permissions to write to the file, and try to connect. If th does not help the two steps will then install the 5.0.07.0290 version.

  Thank you

  Delvallée

• PS CC 2015 10 bits/channel display problem

  I just bought an Eizo monitor with support for 10-bit and I have some really boring color bands. System details:

  -10 Windows 64-bit.

  -PS CC 2015.1.1. 10-bit enabled in the performance tab.

  -W8100 week. Driver 15.201.2401.0. 10-bit enabled in the control center.

  -DisplayPort

  Steps to follow:

  -Create 1000 x 200 Profoto 16 bit canvas.

  -Create a horizontal gradient of pure black (left) to white (right).

  Black and grey size (left), there are very visible vertical strips with a greenish color. If I change the color space Adobe, the Green banding is reduced but still noticeable. The Green banding disappeared if changed in the sRGB color space.

  If I change the mode of basic design, the Green banding disappeared, but also support for 10-bit disappeared; I can see all the gray of the typical stripes on an 8-bit screen.

  I've attached a picture of how compare the three. From top to bottom, Profoto, sRGB, Adobe. I had to take a picture, because Windows does not allow for 10-bit screenshot!

  

  Is there a current solution to this problem, or do we wait for a software upgrade.

  Kind regards

  Teo

  Shadow color banding ProPhoto is an old bug in Photoshop, CS5 less well known and well documented since at the.

  It affects the ProPhoto files when the GPU is set to 'Normal' or 'Advanced '. With this setting, view (the conversion in the monitor profile) color management is handled by the GPU, and the problem is apparently inaccuracies in the OpenGL engine.

  To the CPU and the banding color management setting to GPU 'Basic' travel disappears. Adobe RGB and sRGB are exempt anyway.

  Photoshop engineers are aware of the problem for years, but have not been able to do anything, we can assume that the problem is not in the code of Photoshop.

• iPhoto problem. Should I upgrade to the latest version?

  When I open iPhoto (version 7.1) I get no rows of thumbnails.  I have a great picture.  I can browse through the photos.  I can change them.  I can't select or drag them.  I would like to make small thumbnails in the upper part in edit mode.  I've been scanning pictures, lots of pictures on the computer.  I have saved 1 day before this problem occurred, so I have a backup.  Should I try to rebuild the thumbnails (and how I do that)?  Should I try to restore Iphoto from backup?  Or should I try updating iPhoto with a newer version?  Should what version I expect?  I have OS X 10.6.8 Snow Leopard.  2 GHz speed.  4 GB memory.

  Note the slider at the bottom right of the iPhoto window. Try to drag the left.

• Hi, my Mac starts with a window, "TuneupmyMac." Should I run this to correct problems or should I remove? Thank you

  Hello

  Whenever I start up my Mac, a window will open called 'Tuneupmy Mac'. I don't know if is something that I should run to resolve the problems or remove them. If I have to remove it, how should I do that?

  Thank you

  Coral

  You must remove it.  Is "TuneupMyMac" a good and safe program to use?

• 16-bit to 8-bit conversion image problem

  Hello, I am projecting a 16 bit image to 8 bits for the special criteria. I met a problem when the image is 8-bit cast, the entire image is black, creating an error that correctly says that the contrast is low (which makes sense since there is no value). With the help of one other programs I am able to convert 16-bit to 8-bit fine. I tried to play with the update option several times in the distribution of images vi nothing helps. The 16-bit and are both the 8-bit unsigned image. I'll attach pictures and a photo of the code below.

  I thought about it, I had to convert manually to 8 bits to get the right values for the pixels. The 8-bit image resembles the 16 bits one now, allowing me to pattern matching in my vi. It seems as if the use of unsigned 16-bit images and try to convert to 8-bit through the Image of cast iron work sometimes it pixel values are not converted correctly.

• problems of queue/waiting

  Guys,

  I adapt a code LV to the next iteration of our PEAK program that sends data much more quickly.  So that the code LV to stand, I decided that I needed a producer/consumer structure so that the treatment of the data read from the serial port can be processed at their own pace (see attached code).  The 'read' lights up only when a notifier of a loop of "Write" told him to.

  The question I have, is I want an entire line of text to be queued up to the '\n' and for this to be line out queued in the loop of the consumer.  It sounds simple, but the devil seems to be in the details.  At present, only partial lines seem to be in queue and removed.  I tried adding a property node indicating the VISA to read up to the '\n', but I don't know if this helped.  Also, I think that the loop of consumption is always subservient to the producer in terms of speed loop, it iterates.  Is it possible for a whole text in line waiting at a time line and the queue in the same way at their own pace?  The number of bytes in a line varies, so I can't use this method.

  A few problems with your code.

  1. your VISA reads enum TermChar set to enter the number of bytes to read.  That makes no sense.  He's looking for a number not an enum.  This is why there is a point of constraint.  The value of TermChar is actually 2, then read you 2 bytes.  You have a knot of property There you say the number of bytes in the port, but you do not use.

  2. your boss while loop will never stop because you have a False constant that is connected to a Terminal loop.  The only way to stop this program is to give it up.

  3 never let go. you the declarant 'GO', that you created in the upper loop and the central loop.

  4. Why do you have the word "Inopérable" on your stop buttons?  In addition, it is more desirable to have a single Stop button that stops the whole program, rather than having to hit several stop for each individual loop buttons.

  JK1,

  Wouldn't be easier (since the stop character is activated and is the default value of \n) to just read a sufficiently large number of bytes, larger than any number of bytes that you would ever expect in a message. ?

  A read VISA ends in one of 3 ways.

  1. when the required number of bytes have been read.

  2. the stop (if enabled) character is received.

  3. the time-out occurred before the get #1 or #2.

• HP Envy 5532 - Win 7 64 - bit - USB printing problem

  Hi all

  I recently bought a HP Envy 5532 all-in-one, which is located to the sides of

  my HP Compaq 6000 running Windows 7 Pro 64 bit.

  I tried a few HP diagnostic programs, which recognize,

  but do not solve the problem and suggest uninstall and start again.

  I also installed the latest driver download, rather than the installation disc.

  I also tried the Fixit Windows for the USB, nothing helps.

  My problem is, no matter how to install software/drivers to support this

  device, I can't print via USB.

  Once installed, I print a test page for 'printer properties', I can see the coil of the page

  in the active jobs window, then disappear and... nothing.

  There seems to be a link broken between the printer and USB001 which is the virtual USB port

  Everyone knows and if so, please share how you solved.

  as it is driving me crazy.

  Thanks in advance

  After doing a bit more research, it is certainly a problem of Windows security permissions.

  I have a workaround by following this link and can now print. :-), but do not know the security implications.

  Not sure that the installer sets incorrect permissions during installation,

  Certainly, I ran the installer as an administrator and still had the problem.

  Maybe you could advise on the required parameters?

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/56f102d6-E53A-42a9-9855-1e01efeb4cd2/Printer-Spooler-access-denied-on-local-printers?Forum=winserveressentials

  Hope this helps to determine what the problem

  concerning

  Terry

• Help running SimCity 4 on W7 64 bit pc / cursor problems

  Hi all - I have a brand new custom HP 450 t. Intel CPU quad core i 870 and 2BG GPU Radeon HD 5570. 8 GB of ram.

  I'm a * die hard * SimCity 4 players and you have installed the disk 1 and 2 on my machine without problem. During my 1st game play, the cursor passed its form of arrow normal to a line about an inch long, smooth on one side and rigid, model triangle on the other. All the features of the mouse has stopped at this stage. The cursor is then in a square, about an inch in size with pixels of colors of the Rainbow and still not the possibility to click or select anything. The task manager has been the only way for me to close the game.

  I ran SC4 on our house built 8 years without ever a problem (XPpro) pc. Even for a short time, I start the game on my Vaio laptop, with the only question being incredible RAM consumption resulting in the gameplay being too slow to even bother.

  But I've never seen this kind of problem before. I have not yet tried. After reading online compatilbility issues possible between SC4 and W764bit, I'm not sure how to proceed. Yes, I know Microsoft site advises that SC4 IS compatible. But I really think that if this was the case, so many hundreds of users would not be have reported problems on this forum as well as others.

  Any advice on the question of whether I should even bother, stuff, tips would be greatly appreciated. Thank you very much!!!

  Hi aenflex,.

  Through my research, I found that SimCity 4 is companies; Please correct me if that's wrong.

  Windows 7 says SimCity Societies Compatibility Center is not not compatible and if the game maker

  Windows 7 Compatibility Center

  EA requirements

  Method 1: You can install the update is available for this game and see if that makes a difference

  Update available for SimCity 4, install and check to see if the problem persists

  http://support.EA.com/app/answers/detail/A_ID/223/kW/SIM%20City%204%20system%20requirments

  Method 2: You can follow the steps described in the article below

  Troubleshoot display with Microsoft games

  http://support.Microsoft.com/kb/263039

  (Article apply to Microsoft games, steps for other games)

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.