Equium U400 - cannot start webcam via buttons of enlightenment

Similar Questions

• Equium L20 - cannot start Windows mode of

  Hello

  I was wondering if you can help me. I have an Equium L20 - 197, windows xp home edition. (Also technically challenged!  :)) When I booted my computer laptop first time today, I received this message-

  «We are sorry for the inconvenience, but windows did not start successfully upward...» »
  and he gave me a few methods of commissioning:
  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good Configuration know (your most recent settings that worked)
  and
  Start Windows normally

  I was able to start press start windows normally and start the computer very well. I turned off the computer OK, then it was restarted later without any problems. I then restored in a frame earlier that the system did not work well. Restore seemed to go OK but then my computer froze, then were shut down by pressing the power button.

  However, the laptop will now not reboot. Just as I think it starts it goes to the error message and none of the options will work to start the computer, and I am now stuck on an endless loop of the above message.

  I don't want to use the product recovery disc, that he will wipe away all of the hard drive and I have the info I need access to! I have a recovery CD product for a Fujitsu which has windows xp edition family sp 1 on him. Is it possible that I can use this to start my computer or is there something else I need to do? I thought after pressing F12 and if it is possible to use the other drive Fujitsu to launch boot my system but do not know if this is possible. I don't have an xp disk from toshiba installation disc, when I bought the computer. :(

  I learned by a guy from the computer to the phone that sounds as if I need a new hard drive but would like to explore other methods before you go this route.

  Thank you very much in advance for any help you can give me. Susi

  Hi SusiB_1,

  Unfortunately, if you can start Windows t in any of these modes you have only one option and that is reinstall Windows. I mean you should do? You can do anything in this case

  As you wrote wipes disc, the whole HARD disc Toshiba Recovery and that's right because it of needed to recover to factory settings. But normally you should have a backup of your data or not?
  If this isn't the case, you can access the data, if you put the HARD drive into an external HARD drive enclosure. From another computer, you now have access to these data.

  By the way: for Toshiba recovery disc you n t need a product key. Everything is already done in the recovery image and no activation is necessary. :)

• Cannot start Webcam on Satellite A200 - 1 M 5

  Hi everyone, hope you can help me!

  I can't start my Webcam on my laptop... I don't know what the problem is exactly

  I downloaded the driver from here

  But it still does not work... Even if I open the Msn Messenger, the Webcam button shows up

  & This is my model of laptop: Toshiba Satellite A200 - 1 M 5 PSAE0E

  Wish you can help me

  Ahmed

  Hello

  How have you tried to install it?
  Did you remove the old driver of the webcam?

  I recommend you all first delete the old software, and then restart the laptop.
  Then, you use a freeware tool called CCleaner.
  Run this tool, clean the registry and the system and then install the new software.

  Good luck

• Equium L300 - cannot start from other CD or recovery disk

  Equium L300
  bought used again 3 months 9 months left. The battery is dead flat.

  When restarting

  boot hard-> disc Bootmgr is corrupt does not start
  boot recover disk cd-> the file is maybe damaged. The file header checksum does not match the checksum calculated
  boot from the windows DVD install-> same as above

  I tried numerours disks but will not start.
  It will not boot on USB. Tire also tried hard drive seems ok.

  BIOS looks ok and see the hard drive and dvd etc.

  Ideas otherwise a fairly expensive machine for two monthe use.
  Was just out of warranty before failure appeared

  Thank you chris

  Hey Buddy,

  > But still think bios is damaged
  If you believe it, contact your authorized service provider. Technicians can check your laptop and try to reflash the BIOS. Technicians are really experts and so this should t be a problem for them.

  Here you can find one:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Satellite A300D - cannot start webcam after reinstallation

  Hi guys,.

  I just reinstalled Windows with a Windows Vista disc, not an a Toshiba.
  My camera seems to work very well, but I can't find the file to open it. Can you show me how?

  Thank you

  Hello

  The webcam software should be included in all programs-> Camera Assistant Software
  There you should find an exe that starts the application.

  Welcome them

• Satellite L50 - cannot start webcam

  Hello!

  I have a Satellite L50 and I can't open my camera.
  It is said "to begin with, connect a camera"

  someone knpws where I can find the drivers or what to do with this?

  Thank you!!

  In order to use the webcam, you must use the application of webcam Win 8.1.
  But you should also check the privacy of access webcam settings.

  You'll find this under settings PC-> St-> webcam

  Please see also the useful Microsoft page on the webcam to Win 8.1 internal
  http://Windows.Microsoft.com/en-us/Windows-8/camera-app-FAQ

• Satellite L500-1DT: cannot start webcam - 'initialization failed '.

  Whenever I try to open my webcam it comes up with the message "initialization failed" and no other information.
  Does anyone know how to fix this?

  I'm not completely computer so simple instructions please!

  [Thanks:]

  Hello

  First remove the software from the webcam installed in the system.
  Then, visit the page of European driver of Toshiba and download software webcam for your laptop model.
  Unzip the package, and then reinstall the webcam software.

  Then restart the laptop and try again!

• U400 cannot start after the initial start of lenovo screen

  Hello
  I got my 400 U since May and it was great before that. I close the lid of my computers to sleep, but I accidentally moved.my wireless mouse. I opened it to put it to sleep again when I was greeted with a screen that I recognize not so I restarted the computer. Now, he can't move before the initial startup screen Lenovo. It says to press fn + f2 to set up or fn + f12 for.multiboot. No command works. The recover button, which brings me to the screen as well. What should I do? PS I have Windows 8 if it's important.

  Worse, he seems to have resolved itself.

• Cannot start WebCam

  I've recently updated my laptop TOSHIBA for Windows Vista to Windows 7. Before I could raise my built-in webcam or find it in a search. With this new Windows 7 I can't find it. How do my Webcam for this new program in Windows 7?

  Hello

  You must load the drivers of the device Windows 7 at Toshiba. References to Vista also apply to the
  Window 7 here.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Just you'd go to Toshiba Support and get the driver for your model laptop.

  Go to your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Good time to get some other updates here.

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Monitor on Equium U400 is reversed

  Equium U400 has started and the screen is now reversed, it could be the inverter or backlight in the monitor.
  Would appreciate any help to try to find a solution to fix or suggestion for a place to buy the right part for my laptop.

  Thank you very much

  Clark

  Stand by. The photo is just inverted or there is a problem with image quality?
  I mean why you write on the inverter and backlight.

• Cannot start HP Support Assistant,

  Cannot start HP Support Assistant - always get the message "HPSF.exe has stopped working" and need to close.  I have a HP TouchSmart 610 running under Windows 7 64-bit.  TouchSmart works not properly, but used to work.  Cannot start webcam either.  I totally lost to the search on the HP website for a solution.

  The version that is in your Web page - and that I gave you to date is an update only.

  Rats.

  Search your Recovery Manager for the original software:

  • Start > search / type "Recovery Manager" > click here to open the program
  • You want "Immediate aid" and search for "reinstall drivers and Applications.
  • Wait for the list to build...
  • Search for HP Support Assistant - version, of what I can extrapolate from what I see now, should be a version 5.x - perhaps 5.1.x or 5.2.x
  • When you find HPSA, reinstall it.
  • Reboot the system after installation.

  Assuming that installs it the software (from the Recovery Manager), you can then use

  sp54931 V6.1.12.1 HPSA Rev A

  update the software and take advantage of the fixes contained in this package.

  ==================================================================================

  I can't find the original HPSA to your exact system type.  I hope you find your software in your Recovery Manager.

  I find the reference to the last update - 7.0.39.15 revision A

  I heard that, in some systems, version 7.x has exposed problems (constant reboot requests).  This will be fixed by HP and it won't be long until the issue is resolved.  Your system may not even be affected - you can always try it later if the current problems are resolved.

  If the original HPSA software is not in the Recovery Manager, it can be elsewhere in your system...

  Let me know.

  If all else fails, we could try HPSA for a similar system of TouchSmart - the worst it will do is not installed.

• Re: Equium A210-1AS - blue screen and cannot start

  My computer was working fine, I stopped him, the next time I start up, it shows windows loading screen, then a second a blue screen flashes by, it restarts and repeats, I stopped and began to tap F8 until the advanced boot options appears, safemode ect... None of them work and lead all the blue screen If I select the repair option at the top 'Repair your computer' it begins to load with a background of vista and a cursor and then displays the error "the installed program cannot start. Click OK to turn off the computer. »

  in Advanced Startup Options that I try "disable automatic restart in the event of system failure" and the rest of the blue screen to the top, so I can see, it shows an error on usual blue screen, read:

  UNMOUNTABLE_BOOT_VOLUME
  STOP: 0X000000ED (0X85DDA600, 0 X 0000000, 0XC000009C, 0 X 0000000)

  I don't have a recovery CD, as I believe, there is a recovery partition, but I don't know how to access it-
  I use Equium A210-1AS
  Part number: PSAFJE-005005KS
  Windows vista 32 bit

  Thank you

  I know know that the recovery partition is consulted theough 'Repair your computer' but shows just "the installed program cannot start. Click OK to turn off the computer. »  :/

  null

  > I don't have a recovery CD as I believe, there is a recovery partition, but I don't know how to access to this

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

• webcam works but the software cannot start the capture device

  Original title: webcam problems

  purchased the software igambin movie2 stop motion, as well as a logitech c500 webcam. The webcam works but the software cannot start device capture. The support of igambin seems to think that it might be the interface or something access to webcam all the time. Any ideas out there. Thank you

  Hi reefwatcher,

  1. Did you the latest changes on the computer?
  2. You are able to use the webcam on other applications?
  3. You receive an error message?

  Method 1

  To check if a program is installed on the computer interferes with the software, I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If fails it above step, try uninstalling and then reinstalling the program, check to see if it helps.

  http://www.ikitmovie.com/15/stop-motion-animation-tutorial.htm

  http://www.ikitmovie.com/free-trial-stop-motion-software.php

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 3

  If the previous step fails, then you will need to contact the software retailer for assistance.

  http://www.ikitmovie.com/contact-us.php

• Windows XP, Skype 5.0, Logitech Pro 9000 Webcam, video error: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  Everything has worked out well until the Skype 5.0 download.  Since then, the video does not appear on my screen and displays the following message: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  The driver is up to date and I have DirectX 9.0 c v.

  Thanks in advance for your help.

  Hello.  After several back-and-successive, customer relationship Skype sent me the link depending on where you can get an older version of Skype (4.2.0.187) and many other software if you need. http://www.oldapps.com/Skype.php  I installed it and the audio and video are working as it should with the Logitech Webcam Pro 9000 and Windows XP.

• 3110 webcam and Skype - cannot start video rendering engine. Make sure you have a valid installation of DirectX.

  I had a new HP Pavillion Elite running Windows 7 and bought a HP Webcam HD 3110 which is supposed to have Skype compatibility (clearly indicated on the packaging).  The webcam came with a bunch of software (ArcSoft Magic - i Visual Effects2, ArcSoft Webcam companion 3, ArcSoft Connect and ArcSoft ShowBiz).

  When I turn on my webcam using the ArcSoft program it seems to work fine (I can see and record videos with sound). When I try to use Skype, the sound works fine (there is a microphone on the camera). In Skype, the video does not work and it gives me the message "cannot start video renderer. Make sure you have a valid installation of DirectX.

  I have the latest version of the driver for the webcam, I have the latest version of DirectX (version11) and the latest version of Skype (version 5.0.0.152). I tried to use "ManyCam" program that some people recommended, but it did not work. Anyone else have this same problem? Someone knows how to solve?

  Help, please!

  I think HP has provided an update to the drivers of webcam which solves this problem... and Skype will include a fix soon.

  http://support.HP.com/us-en/document/c02639369