6500 fax and digital phone

Similar Questions

• How to get the fax and the phone works on Vista

  Marlyn has helped me find my vista 32 does not support to #Cls fax and phone is it possible I can get for letting me use my fax and phone from my PC?

  * original title - Marlyn helped me find my vista 32 does not support to #Cls fax and phone is it possible I can get to make me use my fax and phone from my PC? *

  Hello

  the manufacturer of the written material the drivers for their products non-microsoft

  contact and ask if there is a workaround or upgrade to a product of vista compatibile

• Office Jet 6500 (All in One)-Modem, fax and phone on one line

  How to make connections of cables for that the 6500, the computer (dsl) modem and the phone can share one telephone line?  Instructions for the 6500 show must be connected directly to the phone jack and the other devices are then connected to the 6500.

  Would this work?

  a. telephone jack using #1 port on back on officejet 6500 connect.

  b. connect another line of port #2 to the rear of the officejet and divide it to modem and phone.

  Any help would be greatly appreciated.

  You'll forgive me explained is not setup and operation. When you receive a phone call, your answering machine will answer the call first. Once he does, the fax will listen to the call and hear fax tones. If she hears fax tones, it will pick up the call and start receiving the fax. If she does not hear fax tones, it leaves you alone the phone call. This is why the TAM must be connected to port 2 - EXT and the TAM to answer the call first the value.

• The HP OfficeJet 6700 does support fax through a line of digital phone to StarHub in Singapore?

  I get my phone line at home to Singapore's StarHub over a digital phone network. My HP OfficeJet 6700 will be able to send and receive faxes on this network?

  Hello rabbers,

  Welcome to the HP Forums.

  I see that you do not want to be able to send / receive faxes via Starhub digital voice line.

  Actually, I should say no. This would work sporadically on a digital line, but no guarantee that it will work all the time.  Faxing is intended for older analogue lines and aimed at all ever for digital.

  Here is a link that will give you instructions for setting up the device HP all-in-one to send and receive faxes.

  Thanks for your time.

  See you soon,.

• Problems with WRT54GS and EasyLink after the addition of the Comcast Digital phone.

  I had a working network. Cable modem (Comcast), WRT54GS, 2 PCs per (an XP/SP3, a Vista Home Edition SP1), 2 cable PC laptop wireless (an XP/SP3, a Vista Home Edition SP1) and a HP OfficeJet 7210 printer (connected to WRT54GS as a network printer). Everything was going well and worked.

  Then, I added the Comcast Digital phone. Obviously, they went for a new modem cable modem cable with the phone service option. Now I can't print to the wired Vista PC OfficeJet and EasyLink displays "initializing" for too long I'll wait (5 minutes).

  Finally, I must kill EasyLink from the Task Manager. Any help or ideas appreciated!

  I solved the problem. It turns out the new modem cable and problem with EasyLink initialization were 'diversion '.

  The problem turns out to be a classic network problem! The Vista PC wired had a wrong IP address. The wireless PC XP has the printer configured with the name of network instead of the network address (IP, for example).

  When I deleted the printer on the Vista PC and added to the correct address everything worked fine.

  Apparently, the printer got a new IP address of the server on the WRT54GS after installing the new modem. In addition, it seems that Vista doesn't has not report an error of communication to a network printer, but for a direct USB connect.

• connect the fax and scanner on HPofficejet 6500 wireless

  HP Officejet 6500 wireless. to the PC, a Toshiba. Problems showed up to 4 months, this has been resolved by directly connecting (wired).  The printer prints, but the Fax and Scanner are not detected.  The machine is an all in one.

  Hello

  Your printer is a network printer, you are better plugged into the router and configure it with the HP software.

  Then use it with the management software provided by HP.

  AIO devices aren't devices such as hard drives, DVD, network, etc, they do not adhere to established standards and must be used with the software of the provider.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• OfficeJet 6500: Fax appears not when you add the printer with El Capitan

  I've just upgraded to El Capitan.  I have a 6500 Officejet and Officejet 6700 on the network and that you can print on both but fax is not working.

  I tried to delete faxes from the Printers & Scanners window in the settings, but when I try to add more once they are not appearing in the list.  When I click on add everything I see is the following:

  

  It should be an option fax for two (well I want that the created such as 6700 6500 is not connected to a phone line).  Anything I can try to get the Fax option to appear so that I can set up the Fax network (the printer is in a different area of the building so my work around printing and then manually fax is a pain - unfortunately, one of our main suppliers insists on faxes and will not accept orders by email if I need this to work!)

  By the way I tried selecting the 6500 in the list and then change the print to fax driver driver in the area of USE, but the printer is not sending it by fax - print only a few pages of garbage.

  Any help would be great because I find it very frustrating.  Also, I have another Mac with Yosomite on which has the same problem, so I don't think it's specific to El Capitan (but mine was working when I got Yosomite, but I installed the printer/fax under an earlier version originally).

  Try to update the software by following these steps:

  First of all make sure that the printer is turned on and connected to your Mac or on the same network.

  Click on the Apple icon, then select about this Mac.
  Click software update, and then click the Store from the top of the indicated window menu and click on reload the Page.

  Be sure to install any update HP or Apple, then check for the difference.

  If it persists, try manually install the package below:
  http://support.Apple.com/kb/dl907

  Search for now no difference.

  Note that it may take up to a minute for the Fax queue to appear.

  Shlomi

• remove 1 fax number from outlook to use the Windows fax and scan

  I recently bought a new computer with Windows 7 operating system.  I try to use Windows Fax and Scan to send a fax using my Outlook address book fax numbers.  When I enter the phone number in Outlook it shows as (281) 555-1212.  However, it converts the number of + 1 for each entry, regardless of how I implemented the rules of numbering or not.  Then when I try to fax, I don't need + 1 to dial numbers, only the area code and the number.  I can't do the 1 = go away.  If I dial the number directly in the Fax Wizard, and then it composes correctly, but when pulling starting from Outlook address book that's messed up.

  Basically, I don't have the + 1 to dial local numbers.  Only the 10 digits.  When I get a fax in Outlook number, it automatically formats it with the front 1.  I found an article online that said that if I put a comma before the number to 10 digits, it forces the computer to dial only the numbers that I entered.  It works fine when I do that, then my problem is solved.  Thanks for responding.

• 8610 OfficeJet all-in-one: fax and copy only with an Officejet8610e all in one printer

  I bought a 8610 to use only as a fax and photocopier. I have no computer at home.

  Can I get out of the box and try to use it for these two functions without having to download the software CD that came with it?

  Of course

  Simply connect it to your phone line for faxing and use the copy option, none of these options require the use of any computer.

  Follow these steps to configure the fax device:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610-e-all-in-one-printer-series/5367603/model/5367606/document/c04074918/

  And below, you might find the steps to use the copy machine to make it necessary:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610-e-all-in-one-printer-series/5367603/model/5367606/document/c04048945/

  Kind regards

  Shlomi

• HP MFP M127fw Pro: Problem with scan/fax and adf on HP MFP M127fw Pro

  After that I faxed a couple of pages, the device does not work. Now, when I want to fax, he asks me if I want to scan from the plateau, even if I fed the ADF with the paper. When I want to scan, it says "Calibration."... "for a while, but nothing is happening then. It receives the fax and print documents. I unplugged the cable of electricity for more than 60 seconds, downloaded the new drivers from the HP site and installed, but it did not work. Could you please help?

  Best,

  Farrokh

  Hi @Habibzadeh,

  Welcome to the Forums of HP Support!

  I see that you are unable to fax and scan with your printer HP LaserJet Pro MFP M127. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can understand the frustration you are experiencing. Whenever the printer is calibrated, it will not be able to do anything until it is complete.  We must determine why it is calibrated.

  I see that you updated the drivers, but you updating of the firmware of the printer?

  • Click here for the HP LaserJet Pro MFP M127/M128 series Firmware Update
  • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector). This ensures that the printer is full on and can help this situation.

  The printer may need maintenance, please use this guide to help you determine the cause:

  • Fixing poor print quality

  You use Genuine HP Toner?
  What are the levels of toner?

  Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no can not solve the problem.

  If you have a faulty cartridge, it might be under warranty. To check the warranty on your ink supplies, go to hp.com/go/learnaboutsupplies, select your country/region, and then check the information of limited warranty for your supplies.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Windows fax and scan without adding contact

  I use Windows Fax and Scan to send a quick fax to someone.  In the dialog box "New Fax", you can enter a name of my address book Outlook or to a phone number.  I would like to enter a name and a number for someone who is not in the address book without having to create a contact for them in the address book.

  The cover page editor allows me to insert the two {name} and {recipient Fax #}, so I expect to be able to enter this information when I send the fax.

  Thank you.

  JerryK

  You do so by using a one-off Fax address as indicated in this article:

  How to use the Windows 2000 Fax Service to initiate a mail merge in Outlook 2002
  The names that you insert in the cover page editor cover fields in your address book to be filled in by the address book when you select a default contact.
  HAL

  --

  HAL Hostetler, TCE

  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX

  www.kvoa.com--KVOA TV, Tucson, AZ.

  Concert at the Hot Licks - www.badnewsbluesband.com

• Inserting a Flash Drives and cell phone causes blue screen - stop 0x3B

  Original title: inserting a few Flash Drives, but not all, and cell phone causes a blue screen of death

  Computer Dell Inspiron 518 Intel core 2 quad, 6 GB memory, office 2 years.
  HP Vista 64-bit, Service Pack 2, updated version 6.0.6002 fully implemented.
  No change to HW or SW immediately before the first detected failure, but the USB port which is not often used.
  History - off Ready Boost after a short experience and installed months ago driver and card Renesas Electronics USB 3.0.  This driver has been disabled through all of this, but I've not yet physically removed the card.  Disable ready boost was simply to stop - no other instructions not found for removal.

  Anitvirus BitDefender and Malwarebytes scans are both clean.

  A flash drive works fine, but three others cause seconds blue screen of death after installing into any USB port.   Bought a new flash drive and it also causes a crash.  Found cell phone also gives BSOD.  All work fine on another computer.  USB is currently led printer, external hard drive, digital camera downloads and keyboard/mouse very well.  Tried both USB ports with the same results and back and disconnected all other USB devices except the keyboard and mouse.  Remove and reinstall all USB drivers (6) one by one (the 1CH9 Intel USB controllers host family) and USB controllers enhanced (2);  also storage device USB and device drivers USB Composite and façade drivers card reader.  After each new facility, any 'bad' flash player causes immediate crash.  'Good' flash player's Centron Centon Pro 8 GB and one of bad flash drives is one attached PNY 8 GB, another a San Disk.  I think, but I don't remember, that the 'good' flash player was installed for Ready Boost test.

  Unable to find a failure code or no trace of several accidents in the problem reports.   Here is all the data of failure that I could find:

  0x0000003B
  (0x00000000c0000005)
  0xfffff8002a8db87
  0xfffffa601

  I'm puzzled.  Thanks in advance.

  Tom

  Hello

   
  You must update the BIOS (Basic Input Output System) and the Pilots of the Chipset using the computer manufacturer.

• Fax and scan using Windows vista

  I can't create a fax account, I get a message after I chose to use a fax modem say was an error try again later or contact your administrator.

  I use Windows Vista Ultimate Edition
  Motorola SM56 speakerphone modem (does no failure in the Device Manager)

  Kevin,

  I was able to call in phone dialer
  I use Vista 32 bit
  There was no error on the modem.

  I remastered my computer today and the fax and scan works now.

  I'll get in touch, if it stops working again and keep an eye on what I have to install the software to find out why he stopped it in the first place.

  Thanks for your help to try to solve this problem.

  Concerning

  Martin Hazell

• Windows fax and scan.setting my fax modem.

  I have windows vista, try to set up my fax windows and scam, tried to send a fax this morning without a bit of luck.

  first my modem works good .and sending emails using vonage phone,
  but when I go in fax and scan.
  I first click the fax at the bottom of the left pane mode.
  then I click on new fax
  which give me - my fax account
  The name server account status
  Fax modem fax local (default connected
  I click on Add.
  gives me a fax configuration
   
  the connection to the fax modem is faded, but cannot use
  connect to a fax server on my network is ready to click
  He asked my server name I don't know.
  so think I log in when it reads in my fax account, I tried to fax again .but still does not please can you help me

  Hello

  I suggest you to visit these links and check if it helps:
  Configure your computer to send and receive faxes:
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-your-computer-to-send-and-receive-faxes
  Fax: Frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/faxing-frequently-asked-questions
  Fax: Frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/scanning-frequently-asked-questions

  The problems of scanning:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems

  It will be useful.

• How to connect a USB modem fax when the phone line is connected to a HP OfficeJet Pro 8600 Plus 4 - all - in-one?

  So I have a HP Office Jet Pro 8600 Plus (4-all-in-one) that I normally use to fax documents for commercial purposes. I became more and more tired for the first printing of documents directly from my computer to be faxed to another office. It is a waste of paper, ink and time. For this reason, I would like to set up a fax modem so I can use Windows Fax & Scan on my Gateway with Windows 7 computer so that I can directly fax documents from my computer to the recipient fax. The only question is, I have a phone line that I use for my fax and which is directly connected to the fax machine, but I understand a Faxmodem USB also plug into a phone line as well. How can I configure the USB fax modem without compromising the current telephone line attached to my fax machine? Do I need a splitter? I can still use my fax machine to receive faxes and fax all paper document not found in my computer (for ex. documents I received by mail).

  It is always profitable read the documentation provided with the device.  If you had, you would know that the software provided with it will allow you to fax documents directly from your computer without printing it and scanning first.  Download the software (and the user's guide - page 63- here.