6500 ROMMON requirment for VSS.

Similar Questions

• DV 6500, Chipset Intel for Win XP required

  DV 6500, Chipset Intel for Win XP

  I could only find it for vista,

  Utility Intel Chipset Installation for ICH8 for Microsoft Windows Vista

  I need the same thing but for XP, please help

  I downgrade from vista 2 xp recently...

  THX...

  If you don't have XP with SP 2, get first HERE

  V6700TX XP drivers will work for your model. Intel ICH8 Chipset Installation utility first installation and reboot before other drivers.

  (see also below before continuing with other drivers):

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&cc=us&lang=en&DLC=en&product=3651452

  You have either Mobile Intel 965 Express Graphics or Nvidia Graphics:

  http://tinyurl.com/2q6ss4

  Some of the factors above require MS UAA, .net and Windows Installer 3.1 first.

  Ms. UAA(required with a reboot before Realtek audio):

  http://www.mediafire.com/?4ben9zlesng

  OR > MS UAA for XP SP3:

• Cisco 6500's inside the VSS Configuration. Port ID's channel

  Hello

  I have a pair of 6500's Setup with VSS and there is currently only one link between then. However, one end of the link is Po10 and the other end is on Po25.  If I move the Po10 Po25, things will break? It seems to work fine now. I am about to add a second link and I am concerned about the current configuration.  It makes more sense for me to have the two ends of the same binding on the same port channel ID.  I have seen documentation that States otherwise however.

  Interface Port-channel10

  No switchport

  no ip address

  pass the virtual link 1

  MLS qos trust cos

  no consistency mls qos channel

  !

  Interface Port-channel25

  No switchport

  no ip address

  pass the virtual link 2

  MLS qos trust cos

  no consistency mls qos channel

  DTC_6509s_VSS #sh run int Te1/5/4

  Building configuration...

  Current configuration: 116 bytes

  !

  interface TenGigabitEthernet1/5/4

  No switchport

  no ip address

  MLS qos trust cos

  channel-group 10 mode on

  end

  DTC_6509s_VSS #sh run int Te2/5/4

  Building configuration...

  Current configuration: 116 bytes

  !

  interface TenGigabitEthernet2/5/4

  No switchport

  no ip address

  MLS qos trust cos

  channel-group 25 mode on

  end

  DTC_6509s_VSS #.

  DTC_6509s_VSS #sh vslp lmp sum

  Example #1:

  Summary of the LMP

  Information about the link: configured: operational 1: 1

  Peer Peer Peer Peer timers running

  Interface Interface state flag MAC indicator switch (time remaining)

  --------------------------------------------------------------------------------

  4/5/TE1 VSFP VSFP operational 0026.0a26.84c0 2 Te2/5/4 T4 (24ms)

  T5 (s 59.95)

  DTC_6509s_VSS #sh switch port-channel virtual link

  Flags: - Low P - D bundled in port-channel

  I have - autonomous s - suspended

  H Eve (LACP only)

  R - Layer 3 S - Layer2

  U - N running - is not in service, no aggregation

  f cannot allocate an aggregator

  M not in use, no aggregation due to minimum links has not met

  m don't use, port do not associate due to not meeting minimum links

  u - unfit to tied selling

  d default port

  w waiting to be aggregated

  Protocol for the Port-Channel port group

  ------+-------------+-----------+-------------------

  10 Po10 (RU) - Te1/5/4 (P)

  25 Po25 (RU) - Te2/5/4 (P)

  Hello

  It doesn't make a difference if you do both sides with the same channel id or not. The ID of the port channel is a logical interface that does not impact on the etherchannel between them at all. So, you can leave one side Po10 and other like Po25 without problem. Just make sure you have at least one member of the Portchannel Active physical interfaces for not losing your connection to VSS.

  Kind regards

  Mohamed

• The requirements for the universal Clipboard not correct?

  Hello

  The requirements for the universal Clipboard for iMac is not correct. It should work on my iMac mid 2011, but it doesn't. It works on my Macbook Air mid-2013, so I know it works in general.

  You do not discuss Apple in these forums, we are all users like you.

  If you have any questions please ask, however if you have any comments for Apple please leave at www.apple.com/feedback.

• How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8

• Minimum requirements for Notes?

  The minimum requirements here system requirements for iCloud - Apple support , it does not note.  No one knows what would be the minimum version iOS on iPad for Notes synchronization?

  Jeff,

  I think that iOS 9 is required... Enhance your notes with iOS 9 and OS X El Capitan - Apple Support

  Use of Notes on your iPhone, iPad and iPod touch - Apple Support

  Notes (El Capitan): See notes on all your devices

  

• The amount of space (memory) required for the good functioning of Firefox?

  The amount of memory required for the operation of Firefox? Trying to decide between IE and Firefox. Research in the new computer and need to think about which browser to use, and how much space it needs to work properly.

  You need no more than 40 MB for the operation of Firefox.

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• where the requirements for the current download? This used to be posted prominently.

  where the requirements for the current download? This used to be posted prominently.

  See:

  • http://www.Mozilla.org/en-us/Firefox/24.0/system-requirements/

  You can find the full version of the latest version of Firefox 24.0 in all languages and for all systems operating here:

  • http://www.Mozilla.org/en-us/Firefox/all.html

• When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

  When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
  Installation package. A program required for this install to complete could not be run. "Help, please.

  Hello..

  Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

• Where is it save to save a photo library? Requirements for the external hard drive

  Apple support documents have been somewhat vague about the requirements for a player welcome photo library.

  It is not yet clear if Photos can run a file system, is not HFS +: this restriction is mentioned only for the system of libraries of Photos, which syncs with iCloud (https://help.apple.com/photos/mac/1.0/?lang=en#/pht211de786)

  By default, your system library is stored in the folder of images on your Mac, but you can move it to another location on your Mac, or store it on an external storage device. However, to use iCloud services, the external storage device must be formatted using the format Mac OS extended (journaled), also known as HFS +.

  But it is experiences during the migration of libraries, that Photos cannot migrate libraries iPhoto or Aperture libraries to a photo library, if is not filesystem HFS +.  It will try to create the library migrated on the system drive instead (probably because he can't create links hard disk) and generally not running out of storage.

  Apple less did today, confirmed that he is not sure store of the photo library in a synchronized cloud storage, see: update to iPhoto to Photos for OS X - Apple support

  If you store your photo library in a place that is part of a Cloud Computing service (for example, Dropbox, box or Google Drive), your library might be damaged by the synchronization process. So, you might lose photos.

  To see your photos on all your devices, you can use iCloud photo library. To back up your library, you can use Time Machine.

  I still have not found supporting documentation, that clearly indicates if a library of Photos can be stored on a NAS. If it cannot be used as a library of Photos of system.  For the opening of libraries or libraries of iPhoto, the recommendation of Apple was clear: use locally mounted volumes extended, Mac OS X for your Aperture library

  Does anyone found a similar document for the Photos?

  Is it possible to store original files referenced on iCloud by car or in a box?

• 15.0.1 Firefox what are the system requirements for Mac?

  I use Mac OS 10.6.8 and I can't install Firefox v 15.0.1. What are the system requirements for this new version of Firefox running on a Mac?

  Firefox should work fine on Mac OS X 10.6.8

  See:

  • http://www.Mozilla.org/en-us/Firefox/15.0.1/system-requirements/

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
  • Basket of the current application of Firefox (for example, open the Applications folder in Finder and drag the Firefox application to the trash) to do a clean install (re) -
  • Install the new version you downloaded
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• HP workspace: what is the minimum bandwidth required for cellular and Wi - Fi connections with HP workspace?

  Hey everybody,

  What is the minimum bandwidth required for cellular and Wi - Fi connections with HP workspace?

  Thank you

  Bill

  Although there is no minimum required to run the HP workspace, a 4 G LTE cell phone or higher data network or connection to Wi - Fi network with a bandwidth of at least 1 megabit per second is recommended.

• Requirements for 9 vs 10 versions?

  What are the recommendations vs minumum system requirements for the most recent Firefox vs SVersion 9.xx bersion? I am on Windows 2000 Professional with Service Pack 4 installed and would like DO NOT have Firefox slow down my system somehow.

  http://www.OldVersion.com/CPU-Z.html = CPU - Z 1.42 is the newest for W2K

  Or you could try the Windows system information in the menu start > Accessories > system tools

  I've not used of W2K for a few years now (and the version of WinXP, I will now use all waste removed - tiny WinXP), but IIRC that should tell you if you have a PIII or P4 processor installed

• What is the hardware configuration required for El Capitan?

  Where can I find a list of the hardware requirements for El Capitan?

  OS X El Capitan - technical specifications