6500 will not Fax receive when the answering machine is added

Similar Questions

• Office Jet 6500 will not print after changing the ink cartridges

  Office Jet 6500 will not print after changing the ink cartridges

  Hello

  This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.

  Please see here: http://www8.hp.com/us/en/support-drivers.html

• Media Player will not stop playing when the close button is hit.

  My media player works fine until I try to close. When I watch a video clip, I make sure that I have 'stop' the clip before I "close" (the little red button with an X in it, which is suppose to close the program) the player or clip will continue to play in the background. If I brings up the Task Manager, it will display no programs running, I can still here the clip and I'm going to start > all programs > media player always plays the same clip. It is not suppose to do this right? If it is then how can I change so it 'close' media player?

  Hi major347,

  Thank you for writing to Microsoft answers Community Forums.

  This one seems to be really weird when you began experiencing this problem?

  You have a connected PDA that uses the media player? Sometimes Windows Mobile Device Center has been continuously the reactivation of WMP.

  Another possible issue of the keyboard that you use may control the media player. There are known of the problem with the Logitech keyboard software. Try this if you have a Logitech software update.

  Try to open the Task Manager is trying to kill the wmpsideshowgadget.exe process and check if it shutsdown.

  If it works there, then, open the CONTROL PANEL

  Double-click WINDOWS SIDESHOW

  Uncheck everything that has to do with WINDOWS MEDIA PLAYER

  You can also try to disable sharing in media player click on... Tools-> Options-> library-> configure share-> uncheck the two 'media find others to share' & "share my media".

  Check if it works.

  If all the above fails try to perform the clean boot

  How to perform a clean boot:

  http://support.Microsoft.com/kb/331796

  Try doing a sfc scan and see if that makes a difference

  Try to run a SFC scan, to do this, follow these steps:

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Kind regards.
  Nicolas Mathieu

  Microsoft technical support
  Visit ourhttp://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/Microsoft answers feedback Forum > and let us know what you think.

• keyboard will not wake up when the PC was sleeping

  When the PC is idle and I move the mouse to wake up the key Board will not answer (I can't type anything, when I press keys nothing happens) I have to restart the pc to make it work. did a system restore, but the problem is interrmittent.

  Hello

  Intermittent problems can be very difficult to resolve. If the keyboard a 3rd party with special drivers
  as an MS Optical or wireless? If so, you should get the latest drivers.

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• LR6 will not automatically start when the memory card is inserted

  Hello

  Recently upgraded to LR6 from LR 5.7.1. When LR 5.7.1 was installed, it would automatically start when the memory card is inserted. With only LR6 installed it does not open when the memory card has been inserted.

  I "see the import dialog when a memory card is detected."

  I have LR installed 6.0.1.

  When the memory card is inserted, you receive the following error message:

  

  If I right click on the disk memory and select Auto Open play, a list of programs appear particularly LR. The program is highlighted is

  

  If I click on LR in the list above, I encounter error "Application not found".

  When I manually start LR6, it works and I can manually import from memory card.

  What can I do to fix this?

  Thank you

  Stu

  Yes, Autoplay is still trying to run LR5.

  There is a previous thread with notes on how to edit the Windows registry to resolve this problem, if you are comfortable doing.

• 20.0.1: file == > new window & private in new window only will not open then Firefox will not stop running when the application is closed

  Although nothing seems to happen when clicking new window or new private window, there seems to be some process started because when I try to close Firefox and reopen it, I get an error message saying that Firefox is already running. My only option then is to stop the process through the Task Manager. I tried (many times) to uninstall and reinstall.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• 6500 a Ofdficejet: my HP Officejet 6500 will not print black. The cartridge is full

  My printer prints black; the cartridge is full and recognized.  There seems to be a loose rubber around the print sensor ring

  Hey @PickDan,

  Welcome to the Forums of HP Support!

  I see that you have problems with the printing of the all-in-one printer Officejet 6500 a. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.

  If after the above, that you are unable to print correctly, the printer must be replaced. You can contact the HP Support by clicking this link and filling out the form below to see what options are available.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on the thumbs up icon. The two icons are below this post.

• I have updated to iOS to 9.3.1 now my screen is in portrait mode and will not change landscape when the phone is turned. Also, it just goes straight to voicemail without ringing on my end when people call. All I can say all the settings are correct. ideas

  Looks like my question may have been corrupted.

  I updated my phone to iOS 9.3.1 last night. Now all my incoming calls go directly to Voicemsil without ringing on my end. My sound and message settings appear normal for me. Also, my screen rotates out of sight from portrait to landscape view for photos FB etc...

  suggestions to solve problems?

  It seems that if you have the lock of portrait and do not disturb activated. Swipe up from the bottom of the screen to call the control center. Look at the two circular icons on the top right row. They are white? If so, tap on them to turn them off. One resembles a Crescent Moon, the other as an arrow in a circle with a padlock in the Center.

• Tecra M5 will not be on when the power button press

  I just sent my Tecra to a new location and at startup, nothing happens. The power light and the charge battery lights up, but nothing else. Could something have loosened up, which causes the computer does not start. I don't have a recovery CD.

  Any suggestions?

  Thank you

  Sandy

  Maybe the RAM has become loose? Try reinstalling the RAM, or RAM slots with table ELECTRIC cleaner cleaning.

• Field will not be centered when the text adjusts

  I have a centered LabelField.  It works fine until the text is too long.  It envelops like I want it, but the center alignment is lost.  I also tried a RichTextField without success.  Any ideas?

  GridFieldManager gfmTop = new GridFieldManager(2,0);super.bodyManager.add(gfmTop);
  
  VerticalFieldManager vfmTopLeft = new VerticalFieldManager();vfmTopLeft.setPadding(0,15,0,0);long styleCenter = Field.FIELD_VCENTER | Field.FIELD_HCENTER;vfmTopLeft.add(new BitmapField(image, styleCenter));vfmTopLeft.add(new RichTextField("See Additional Images", styleCenter));vfmTopLeft.add(new LineBreakField(FONT_HEIGHT));vfmTopLeft.add(new LabelField("Availability:", styleCenter));vfmTopLeft.add(new LabelField("IN STOCK", styleCenter));vfmTopLeft.add(new LineBreakField(FONT_HEIGHT));vfmTopLeft.add(new LabelField("Shipping Included", styleCenter));gfmTop.add(vfmTopLeft);
  

  

  added DrawStyle.HCENTER and it's good.

  long styleCenter = Field.FIELD_VCENTER | Field.FIELD_HCENTER | DrawStyle.HCENTER;
  

• Receiver "warning message" that the photos could not be found and that it will not be included, when sending emails with photos?

  Original title: How can I include pictures when I send an email?

  Sometimes when I receive an email with images embedded in the e-mail message, if I send the email, the text is passed, but where the photos were in the original message, there are empty spaces or perhaps some identification confusion of where a copy of the projected image can be kept (I think - not sure). Sometimes when that happens, I get a message "warning" that the photos could not lies and will not be included.

  

  I tried to paste a copy of the warning above - no luck with that either.

  HELP please.

  Hi Bill,

  1 are you facing the question with any specific email account?

  2. the problem occur only when you transfer emails with photos?

  3. What is your default browser?

  4. you see a red "X" instead of a picture on Web sites also?

  Some of the sent emails will not include images when you transfer them again. You can should forward the e-mail as an attachment or, save the images to your system first and then try to attach the photo and forward the message.

  You can also check with your email provider to see if there is an option for "include images with messages" that must be activated.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• My wife tried to update firefox and since then it will not open. When I click it a window appears and says that I have to finish the upgrade a previous version by restarting. When I reboot nothing changes.

  My wife tried to update firefox and since then it will not open. When I click it a window appears and says that I have to finish the upgrade a previous version by restarting. When I reboot nothing changes.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.
  
  You can also remove active - update.xml, or even updates.xml (stores the history of update).

  • http://KB.mozillazine.org/Software_Update (Update works not properly)

  C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
  

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Having a printer at the office and one at home, but use the same PC for both? Unable to print at home after bring you it to the office (and vice versa)?

  If you USB, most of the time, the PC will recognize what printer is which. Sometimes PORTS does not commute. You can manually change the correct ports if necessary.

  CLICK ON THE MENU START

  1 devices and printers

  2 right CLICK on the printer

  3. choose the PRINTER PROPERTIES

  4. click on PORTS

  5. There will be a list of ports with one (checked marked). If it's on the wrong port, change to the right pair and choose APPLY.

  (NOTE: it must ALWAYS be on a USB port or a wireless connection.) Some ports wireless start with a #(adresse IP) or a SERIAL number)

  I hope this helps. Sometimes, you can create your own port if you have more questions.

• My HP officejet 6500 will not print in colour without black. I tried to run the diagnostic, turning / of

  My HP officejet 6500 will not print in colour without black.  I tried to run diagnostics, turning on/off, changing the cartridge, mop up the cart - ink, withdrawal and the cartridges, printing a test page.  All to nothing does not.

  I continued to deepen the forum and found what was a soluntion for me.  I went to the configuration selected, then went to tools, it chose and then select printhead cleaning.  The first time that he clean the printhead, I only got six rectangles colored at the bottom of the test page printed.  My screen then asked if I wanted to get another clean process and I said YES.  Low and behold, the test print page not only the FCMA out with 6 colored rectangles but also tons of alphabets in black.  Hooray! His works again.  Hope this works for you.

• "Non-rectangular objects will not display correctly when you export with the help of CSS."

  I use Ind CC 2014 export a document to an epub recomposable.  The document contains a picture .ai.  The image export correctly in some parts of the the.epub, but not others, when it is deformed. There is a warning on export: "Non-rectangular objects will not display correctly when you export using CSS."  Any suggestion is appreciated.

  Hello

  For these objects, the best option is to 'rasterize container"to preserve appearance of the page layout setting in the Options of the Export Object dialog box and then export to EPUB recomposable.

  Kind regards

  POOJA