6510 e - all in on PRINTER. Photo product core exe has stopped working? lang = en

Similar Questions

• Dell 2230 Laser Printer sometimes I get this message: host driver printer for 32 bit applications has stopped working.

  Recently, I started using a new computer - a Dell Precision M6700 with Windows 7. Previously, I used a Dell with Windows XP and had no problems with my printer. Now, I have intermittent problems with get this printer to work. Sometimes it works fine, but sometimes, I get this message:

  Host driver printer for 32 bit applications has stopped working. I clicked so he could find a solution online, and it is never able to find one. I just get another message that says:

  An unknown error occurred while printing.

  Problem event name: APPCRASH
  Application name: splwow64.exe
  Application version: 6.1.760.1.17777

  Do you recognize this problem and is there a solution?

  Hello

  I suggest to go through the steps from the link provided and check.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  If the problem persists, you can also run a full scan using the Microsoft Safety Scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  You can also contact Dell to:

  Product support

  http://www.Dell.com/support/troubleshooting/us/en/04/troubleshooting/ProductSelector

  Hope this helps and keep us posted.

• Error when you try to view the image with Microsoft Photo Viewer: COM Surrogate has stopped working

  When I try to post a picture (JPG) with Microsoft Photo Viewer, I get "COM Surrogate has stopped working"

  I don't have Nero or DivX installed, which is what all the forums seem to indicate the cause of the problem.

  Can you suggest anything?

  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

  The above information on the problem is explained in the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• photo shop cc 2015 has stopped working, Windows 7

  After the recent update from 2014 and 2015 whenever I try to save your work in photo shop, I get a windows error message saying

  photo shop has stopped working, and it leaves the program, never had this problem before.

  I have already installed sp1, and she always does.

  can find no reason for this, tried to update everything and still nothing

  anyone has any ideas, it's more than a little boring. have lots of pictures, that I cannot now see

  Hi Colin,

  Please refer to my document below.

  Photoshop CC 2015 crashing all closing on Windows. (Module failing Photoshop.exe)

  Please post on the Adobe Forums.

• Vista: All Windows updates suspended / "Module of Windows Installer has stopped working and Will Close."

  On my installation of Vista, all windows updates no longer work.  If I try and run them from Windows Update in Control Panel one starts to run but then it just hangs.  At the same time, I get a message "Windows install Module has stopped working and closes".  If you look in the services, it is crushed, but restarts.  The update remains always hung.  It doesn't matter what update I try and run, I always get the same result.

  When the computer is shut down, it also tries to automatically install updates.  These also hang on the first, which means that I have to force power off the computer.

  Don't know if this is related, but I don't think that SP2 already installed - it kept if crush (don't remember what was the error message).  When I restart in safe mode it tells me that I'm still on SP1.  I followed all the suggestions on how to get SP2 installed for the error I received, but nothing has worked.

  Do not really understand what I have really installed a lot of "_" on the PC, it is a "clean" installation (about 1 year now).

  Any ideas?  Really, I don't want to have to do a re-install, but I suspect that is where I'm heading unfortunately.

  Hi AndrewInNZ,

  Thanks for visiting the site of the community of Microsoft Windows!
   
  I would like to ask you some questions for a better understanding of the issue:
   
  (a) did you try to temporarily disable the security software and check if updates are smooth?
   
  (b) you are using a firewall in addition in instead of the windows firewall? If so disable (temporarily) of the third party firewall and look for updates.
  It is usually caused by a 3rd party firewall that it blocks the internal ports.
   
  Check out WERCON for more information-
   
  1) Click START | wercon.exe type in the search box start and click on enter.
   
  (2) select "View problem history", under 'Windows identified problems' with the right button on a problem, and then select "view problem details. Click "Copy to Clipboard" export to text document
   
  Also reset the Firewall setting:
   
  1) Click START | type FirewallSettings.exe into the start search box | Click on FirewallSettings.exe above | Select the Advanced Settings tab. Click 'Restore Defaults ' | Click on apply (if Hi-lighted) | Click OK

  Check the status of the service as well:

  Log in as administrator-

  Start button | Control Panel | System and Maintenance | Administration tools

  Double-click on Services

  (Provide the administrator password or a confirmation if prompted to do so.)

  Right click on the 'Windows Modules Installer' service, and then select Properties.

  Select the general tab - make sure that the startup type is manual

  Here is the link to solve problems connecting to Windows Update or Microsoft Update
  : http://support.microsoft.com/kb/818018/en-us

  If you want to check the version of the service pack of the operating system:
   
  Right-click on computer and select Properties.

  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Assistant product Hewlett packard has stopped working

  After removing a nasty virus/Trojan horse of my system, I get a dialog box saying "Hewlett packard product Assistant has stopped working" shortly after the opening of the session.  How to solve this problem?

  Your welcome,

  If you upgrade to 7 product Assistant will not work, it has been replaced with HP support assistant, which is the current HP software for monitoring and troubleshooting of the computer.

• Cannot print the financial dashboard on message of 64 bit windows 7 host computer driver print for 32 bit applications has stopped working

  Original title: Windows 7 print driver host for 32 bit applications has stopped working

  Hello

  In my company, we have a Windows 7 (Professional 64 - bit) computer with installed on financial Edge(32-bit). We have been able to print from this fine machine, but recently we changed a printer of Conan for a Dell 2150cn Color Laser Printer (64-bit driver). Now, when we try to print from financial dashboard, we get the following error:
  Host of the print driver for 32 bit applications has stopped working

  Problem event name: APPCRASH

  Application name: splwow64.exe

  The printer is not a network printer, it is physically connected to the machine. In addition, it seems to print very well, if we are not trying to print from financial dashboard. Unfortunitly, once we try to print from financial dashboard, we cannot print from something else. In addition, financial dashboard can sometimes print (this is rare). I uninstalled and reinstalled, using the drivers that came with the CD (tried to download through the Dell website, but Windows seems to hate this driver)

  Hi IToccrra,

  1. the computer is in a domain environment?

  2. who is the provider of the financial advantage program you're talking about?

  Method 1: Try to print in clean boot

  See the following site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: to set the computer back to start normally, use the step 7 in the same link.

  Method 2: Run the printer Troubleshooter

  See the following site:

  Open the printer Troubleshooter

  http://windows.microsoft.com/en-us/windows7/Open-the-Printer-troubleshooter.

  Method 3: update the printer driver

  See the following site:

  Updated a hardware driver that is not working properly

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

  The details of the error are telling us that the accident occurred when the host of the 32-bit printer driver tries to use the printer. Apparently, you are trying to print from is a 32-bit program, and is not able to use 64-bit print drivers correctly. I would also ask that you contact the vendor of the software (from when you try to print) to check the issue.

• License for this product Version 8 has stopped working

  How can I reactivate the license of Photoshop Elements 8 to move the photos in the organizer of the editor.

  Error: 150,30 shown

  Hi Harold,.

  Please check these links that might help you.

  https://helpx.Adobe.com/x-productkb/global/error-licensing-stopped-Mac-OS.html

  Error: "License has stopped working". Windows...

  Kind regards

  Sandeep

• When I try to use photo creation message says photo product core exe stopped working

  When I try to use the software of HP photo I receive picture message produced exe core is no longer someone could help please

  Hello

  1. If it works well before?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps below and check if it helps

  Method 1: Try to perform a clean boot and check if the problem still persists.

  Follow the steps mentioned in the article below.

  How to configure Windows Vista to start in a "clean boot":

  http://support.Microsoft.com/kb/929135

  Note:

  Once the troubleshooting completed, reset the computer to start as usual.

  I would also recommend to post your question to the following support HP http://h30434.www3.hp.com/t5/Home-Web-Printing/bd-p/Webprint forum

  More information: See here

  http://h30434.www3.HP.com/T5/other-printing-questions/when-i-try-to-use-photo-creations-i-get-message-photo-product/m-p/665349

  Hope this information is useful.

• Error message AIOC exe has stopped working when I try to scan on Dell AIO 924 printer

  I recently bought a Dell studio with Vista (old computer ran XP) desktop computer.  I installed my printer and have been able to do print, but not to digitize from all in one centre, get the above error message

  bredenbm,

  We will try to reinstall the printer using the instructions below. This will install the Dell all-in-one Center.

  First of all, make sure that your computer has all the updates of Windows. I've customized those too, especially the .net framework(required to run many applications). Also make sure you have the latest Java. Since you don't mention how the printer is connected, here the basic instructions for this printer.

  Unplug your printer. Download and run this patch to completely remove the printer from your computer. When the correction is over, it will prompt you to restart your computer. There seems to be a lenghty process so please be patient.

  Restart your computer.

  Download the correct drivers.

  XP drivers

  Vista 32-bit drivers

  Vista 64-bit drivers.

  All other drivers

  Install the appropriate drivers. (Install ONLY the drivers you need) You will be asked when connect you your printer (power on)

  In the digitization to the analysis, if you have the disc that came with the printer, and then insert the floppy disk to the printer and stop running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

• the envy 100 printer screen is partly dead (has stopped working)

  E screen has a problem. the bottom of the screen in part went dead the bottom to wy about half to the top of the window. This dead zone seems to be getting bigger.  The printer is atill impression, but the "copy" button and other actions went walkabouts!

  Hi gaorr,

  I understand that the display does not work.

  I'll be happy to help you.

  Make sure there is no damage to the power cord and it is connected directly to a wall outlet.

  The printer should not be exposed to an electric or magnetic field.

  I would like to do a hard reset of the printer.
  While the printer is still on, unplug the power cable to the back of the printer and the wall outlet.

  Wait 10 seconds and connect the power cable to the wall then the back of the printer.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• Repair of photo gallery Windows Live has stopped working - how this problem is corrected, and what significance does it have?

  I run repair (via control panel-remove-repair) and reinstalled via download without success. The program worked for a long time without any problem until this suddenly started. "Windows control...". "Ms produces nothing.

  Stops Windows Live Photo Gallery (944221)
  answer or does not start
  http://support.Microsoft.com/kb/944221/en-us
  (according to version, database can also be
  Pictures.PD5)

  It would also help if you said what is the problem and why the repair is necessary.

• All files .exe has stopped working

  Whenever I try to open a program I get the * *.exe has stopped working. This is on firefox, windows media, nero, games player, etc.. The only way for me to open anything it must be run as an administrator will search for virus with spyware doctor™, malicious software with malwarebytes' Anti-malware and registry with Regcure errors. but nothing works any help.

  Here's what werFault.exe said on some programs.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Hoyle Puzzle Games.exe
  Application version: 0.0.0.0
  Application timestamp: 562b029a
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 04554e40
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  Signature of the problem:
  Problem event name: BEX
  Application name: FreeCell.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47919e59
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 04554e40
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198Problem signature:

  Signature of the problem

  Problem event name: APPCRASH
  Application name: NeroExpress.exe
  Application version: 9.0.9.100
  Application timestamp: 48d36d6b
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 04554e40
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  Exception code: c0000005

  Check please the RAM to find errors. Please download memtest86 + [1] write a new bootable CD (use a CD - RW if possible) of ISO (download and use ImgBurn [2] for this), restart your PC and scan your RAM 4-5 h to find errors.

  André

  [1] http://www.memtest.org/download/4.10/memtest86+-4.10.iso.zip
  [2] http://www.imgburn.com/index.php?act=download
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Epson Stylus Photo R240 Easy Photo Print error: install shield setup launcher has stopped working.

  original title: r installshield Setup Launcher has stopped working.

  Have all the answers to this question, he just happen to me.

  Dear Debbi,

  Thought you might like to know I finally solved my computer problems. The saga begins, rank Techbubbi we spent seven hours trying to solve the problems without result.

  Looking through my papers of computer I found that I had purchased an extended warranty with Hewlett-Packard on my computer, rang them told them I had used Techbubbi, they began to look at my system and try things varius does ot fix the problem. It was decided that a full erase of the hard drive has been the only answer and restore the computer to its factory settings. I had done a backup a few days before. After the reset, I'm on the Epson/Vista webb page and downloaded Easy Photo printing more Creativity Suite I found that I also need to download the print Module easy all these are on the software page of Epson creativity. The new version is slightly different to the former, but I have finally it come back and have got rid of the Installshield R Setup and Setup.Exe problems. I hope this helps others out there with the same flaws. Thanks again for your help. Colin

• Sharing printers has stopped working for me. MacBook Air "think" printer is not connected.

  Sharing printers has stopped working for me. I have an Epson Stylus Photo R340 connected by USB to my Mac Mini end of 2012, and until recently, my MacBook Air has been able to print to it. Now, he 'thinks' the printer is not connected. Computers are on WiFi. Both computers have an OS X 10.11.5 now and the latest driver of Epson printer. Printer sharing is enabled in preferences, sharing, and "Share this printer on the network" is checked in the preferences, printers and Scanners. I went through the hoops to remove the printer and add it again on the Mini and the MacBook Air.

  Of course, the Mini prints very well via USB. Someone has an idea (that I have not already tried) how to get the sharing of printers to work again?

  Other sharing services work, such as the file and screen sharing?