7 fusion vs Fusion 8

Similar Questions

• Impossible to install 10 Windows via BootCamp on iMac 5K with Fusion Drive

  Hello

  I tried to install Windows 10 Professional via Boot Camp on my iMac 5K end of 2015 (version OS X 10.11) with a disc of the Fusion 2 to for about a week now. Right now I'm on my 4th or 5th try on Windows 10 installation on the iMac because each installation fails gives me an error that the drive is not formatted correctly or he couldn't find the score even though I have the selected in the list of available drives. I even went up to both to run the commands of the PART of the DISK from the command prompt in the area of troubleshooting Installer Windows 10 to format drive to NTFS instead of FAT32.

  Here are some of the mistakes that I received:

  1 Windows cannot be installed to this hard disk space. This space of hard disk is formatted with a version not support the NTFS file system.

  2. we could not create a new partition or locate an existing one. For more information, see the Setup logs files.

  I used the Boot Camp configuration application (version 6.0.1) to create a USB key after you download the image ISO from Microsoft. The USB flash drive that creates the installer will start the iMac, but I can't get past the screen "where do you want to install Windows? I tried the merge disk partitioning ways without success, beforehand, because I thought that it could cause a problem. He was left as a full drive 2 TB, or divide the flash part away and seen the almost 2 to rotation and the merger of 128 GB (flash) portion and lucky either.

  I'm full of ideas on what to try... I have loaded Windows 7 Professional via Boot Camp several times and have never encountered a problem with Boot Camp with 10 Windows so far.

  Workaround I found that worked for me was to install

  Win7 Pro 64 bit.  Then created just the Bootcamp driver USB key

  (no operating system installer).  Next I went to do the upgrade of Win10 of

  in the environment of Win7.  FWIW, I also chose to not save

  anything (new installation).

  You will need to keep the installation to make sure that you press the Option

  key with multiple reboots (why Windows still insists on this)

  and select the Windows volume to boot from.  Once all the nonsense restarts

  were carried out and finally Windows was running, I plugged it in training camp

  driver USB key, install hardware drivers and everything was good to go.

  Now, it was on an old MacBook Pro, which does not officially have the Bootcamp

  support for WIn10 if the material is quite capable.

• a fusion drive is good for audio recording?

  I think buy a 27-inch iMac for audio recording on Logic Pro X, but is not sure a merger player performance, because some say that the part of the HARD of it on only 5400 RPM drive, if I hold with an iMac HARD 7200 RPM drive?

  You will likely get different opinions, but personally I would not use the fusion drive and recommend an SSD.

  Quite significant speed difference.

• I was told there is a way to increase the CPU frequency on the new from3.5 of iMacs to until 4.2 is this true end 2015 27 "fusion 1 TB drive

  OK I end 2015 27 "Imac 1 TB fusion player upgraded to 24gigs of Ram. My Question, I was told when I bought what I could spped is my processor from 3.5 to 4.2 ghz theis true if yes, how can I do

  I was told when I bought that I have spped my 3.5 to 4.2 ghz processor...

  You can choose one of the three basic for this iMac model processors, which cannot be changed subsequently.

  http://www.Apple.com/iMac/specs/

  Intel 'Turbo Boost' can temporarily change a processor to operate at 4.2 GHz to 4 GHz. Maybe what you thought.

• iMac (retina) - Fusion 8 - 10 Windows - very slow

  Hi guys,.

  I need help troubleshooting a Windows 10 virtual machine that runs at snail's pace. Installation program:

  -iMac (retina 5 k, 27 inches, end of 2015)

  -Processor: 3.2 Ghz Intel core i5

  -Memory: 8 GB

  -Storage: 1 TB drive of Fusion

  -Graphics card: AMD Radeon R9 M390

  -OS X 10.11.6 (El Capitan)

  -VMware Fusion 8

  -10 Windows Home / 64 Bit, completely updated according to the settings / Windows Update.

  I installed Fusion 8, installed 10 Windows using the ISO from Microsoft site and added VM Ware Tools. The installation went without any problems.

  VMware for this Windows 10 VM parameters:

  -CPU: 1 heart of processor

  -RAM: 1 GB (shown as recommended in the control panel)

  -Hard drive: 60 GB

  I adapted only screen size settings in order to have Fusion / 10 Windows using the full resolution on the Retina display (Scaled high resolution) for unity and full screen. "Accelerate 3D graphics" it's on.

  I'm now trying to use this virtual machine and it is extremely slow - both in full screen mode and one-stop shops. For example, after you click the icon on the start menu, it takes about 10 seconds until the start menu appear effectively. Chrome opening = 90 seconds. What switching applications or dragging of windows, you can sometimes watch the screen redraw. Sluggish _really_.

  OS X monitor shows only moderate, activity should the CPU activity.

  In the Windows 10 VM, the Task Manager / processes tab shows moderate (30%) Support CPU but memory, its use is constantly between 90 and 100% - even when no apps are open. However, no task stands out as a resource hog.

  I went on "Pre-allocate disk space" in the control panel merge and change RAM of 2 GB to give VM more. Performance feels a whole little bit better, but the load high memory remains even when the system is idle.

  This feels like a cheap $ 250, low-power PC. Is this normal?

  I'd appreciate any help here.

  

  1 GB of RAM for Windows 10 is far from weak. It will be 'run', but not well. Even 2 is pushing it. 1 processor is pushing it too.

  It behaves like a PC $250 because that's essentially what you have given to resources.

• fusion drive

  I just start up my iMac 27 "that I received in August 2016. I ordered a Fusion 1 TB drive. What is the profile of what it says. How will I know that's what I ordered? Somehow this iMac has no help.

  

  Go to Apple > about my Mac > system report > navigate the material, then click SATA. A regular reader will have an entry as well as the size shown below; a fusion player lists an SSD and a normal HARD drive. Mine has a HHD & SSD, but they have not been defined as a fusion drive:

  

  Then you should see a 1 TB HHD and then a 24 GB SSD hard drive (maybe 128)

• Help required with the MacMini Fusion Drive

  Hi all

  I recently bought a second hand end 2012 MacMini i7 wth a fusion drive. The previous owner had created a windows partition. I don't want to return the machine to its original out of the box factory for my use, as I did not need to run windows on it.

  I'm fighting to get the fusion drive to merge. Currently, I have two separate discs that I named her 329 and 781 GB. Disk utility shows that both drives are very good. I rebooted into Recovery Mode to use online disk utility and readers are not displayed in red, and so there is no option to fix them.

  I used the Terminal (after reading online) and it provides the following information:

  + Logical Volume - Group F92C23DE-59E6-48E1-9525-07BAA362792C

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 790333857792 B (790.3 GB)

  Free space: 98304 B (98.3 KB)

  |

  +-Physical volume 5E674D49-E043-46E0-8B68-4A1BE6F198D6

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 7BA0BD21-C934-4179-B432-8CE91651DA29

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 669345005568 B (669,3 GB)

  |

  +--> Logical volume family 9350CC2D-8020-42E4-9C64-A2F1C4BC3DFB

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume C94C8E95-391F-48B9-8920-2BF7C0646691

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 781826392064 B (781,8 GB)

  Reversible: no

  Name: 781GB

  Volume name: 781GB

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  None of the data on disks is essential because it is broadcast on my old Mac mini and can be re-migrated later.

  Any advice on how to return the disc of the merger to its original state of the box please?

  Open Boot Camp Assistant and refer the reader to a single partition setup.

  (143720)

• How to re - combine a HD and SSD in a player of "Fusion".

  Hi all

  Well, this process has floored me know how much time lost, he created and how the problem occurred in the first place.

  I am wanting to do a clean install of El Capitan on iMac late 2014 retina with El Capitan with a 1 TB drive merger 10.11.6.

  Boot from an external hard drive with OS X utility disk 10.11.4, wouldn't let me simple deletion of the reader. He came up with the error message "removing logical volume of the logical volume group cannot delete the storage base logical volume...". »

  So I started to investigate this problem and found:

  estorage-logical-volume-from-the-Terminal http://Apple.StackExchange.com/questions/136590/How-can-i-Delete-a-partition-Cor

  Who publishes various other forum known as the best solution to the problem. Knowing that I hate to use the terminal, I dove in full anyway. I was reformatting disks on Mac for 20 years without needing terminals?

  I got so far as to remove the existing with logical group:

  sudo diskutil cs deleteLVG

  and now the HD and SSD drives appear on the desktop as a empty volumes (which is fine, I don't need to save anything).

  But now, try to use the:

  sudo diskutil mergePartitions HFS+ "Apple_HFS Macintosh HD" (and different combinations of drive locations)

  results only in "the data partitions are not of the same disc.

  This is what I see with the "diskutil list; ECHO; Cs diskutil list "command in terminal.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB 121.0 Untitled disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS Untitled 999,3 GB disk1s2

  / dev/disk3 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 DIS3

  1: EFI EFI 209.7 MB disk3s1

  2: Apple_HFS Mac Master Image 2016 499,2 GB disk3s2

  3: disk3s3 Apple_Boot Recovery 650.0 MB HD

  I have no idea how recombine the separate HD and SSD drives in one drive of Fusion, with which I can then do a clean installation of El Capitan. Can someone please!

  Also, how can quickly and safely erase a disc from Fusion in the future? I need to deploy a new image of master with all our software top one another 10 times, and I want to completely erase the readers for clean installs (with Migration Assistant for about 8 years, moving from a system has resulted in a lot of weird and wacky behaviour on our Macs) and it is time for a clean install for each of them.

  Again, I'd be very happy any help on this.

  -Alex

  Please read this message before doing anything. If you don't feel confident that you can follow the instructions, ask someone more experienced to help you.

  This procedure applies only to an iMac or a Mac mini with a drive installed in the smelter.

  You must read these instructions while no web browser is running, so either print them or load them onto another device before you start.

  1. all the data on the internal disks will be deleted, including Boot Camp data, which are not saved by Time Machine. You need at least two complete and independent backups. A backup is not enough to be sure. There are ways to back up a computer that is not fully functional. Ask if you need advice.

  2. you will need to start one recovery system other than the one on the internal hard drive (if he has one.) There are several ways to do so.

  a. If you have a backup time of the Machine (not a network backup), or a compatible Mac OS X installation on an external drive, then you should be able to start it by holding down press option key to start ringing. Select the external hard drive in the row of icons that is displayed. I mean by "compatible", an installation running on the machine. A version of Mac OS X that is older than the machine is not compatible.

  b. If you used Recovery Disk Wizard (or can use it now) to prepare a system recovery on a USB flash drive, you can start that by pressing the C button on the ring. No icons will appear. Startup will be much slower than usual.

  c. start the Internet recovery mode by pressing the key combination command-option-R to start ringing. Release the keys when you see a spinning globe. Select a language, if you are prompted.

  Note: You need an Ethernet or Wi - Fi connection to Internet to use the features of recovery network. It will not work with modems USB or PPPoE, proxy servers or networks that require a certificate for authentication.

  3. disconnect all other external storage devices.

  What happens then depends on what version of recovery that you are running.

  ☞ If the machine came with OS X 10.10 ("Yosemite"), 10.9 ("Swat") or 10.8 ("Mountain Lion"), and you're in the recovery of the Internet, please take step 4a and skip step 4 b.

  ☞ otherwise, go to step 4 and go to step 4B.

  If you are unsure which version of Mac OS X, the machine came with, search for it on this page.

  After taking these steps apply, you must have a reader of empty Fusion named 'Macintosh HD' on which you can perform a 7 step or step 7B.

  4. repair of the Fusion drive (see "Troubleshooting" on the linked page.) Quit disk utility and go to step 7A or 7B step. Skip steps 4, 5 and 6.

  4. in the OS X screen utility, select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  5. triple - click anywhere in the line below to select this option:

  N=Macintosh\ HD; for d in /dev/disk?; do o=`diskutil info $d`; for D in SSD HDD; do eval [[ ! \"\$$D\" ]] && grep -lqw "APPLE $D" <<< "$o" && eval $D=$d; done; [[ "$SSD" && "$HDD" ]] && break; done; diskutil cs create "$N" $SSD $HDD && diskutil cs createLV "$N" jhfs+ "$N" 100%

  It is a very long line, and you won't see it on the web page. Be sure to select the entire line, not just the part that you can see.

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  6. in the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination. Wait for a new line ending with a number sign (#) to appear. If nothing happens, press the return key.

  Quit the Terminal must be returned to the main screen.

  7. If you have a Time Machine backup, connect the device to backup and restore your data. If you have saved to a network like a time Capsule device, it must be connected automatically.

  7B. If you do not have a Time Machine backup, or if you can not restore from Time Machine backup that you do not have, install OS x Restore data later in The Migration Wizard.

  In the Internet recovery mode, you install the original version of Mac OS X comes with the machine. If you have upgraded the operating system on the App Store, you will need to do it again.

• fusion pages and direct mail

  Hi sorry but new to Mac.

  Using the 5.62 Pages and numbers OS X 3.62

  in some older versions, I read that it is possible to run mail merge if you print letters etc. contacts or Numbers spreadsheet.

  This feature has completely disappeared in the version of 2016?

  If so do we need to use the PC for office work or y at - it an equivalent Mac in Word that can do the basic functions of fusion.

  Thank you very much Mike

  There is no possibility of merge data / messaging integrated into any version of Pages v5 since its launch in October 2013. There is a third party tool that has been designed to allow the merger of data / messaging limited Pages v5. The author of this application frequently for messages in the Community Pages, and is the only source of support in his favor. It has a link to the free app in the previous link.

  V4.3 pages ' 09, Apple's previous word-processing application, integrated messaging/data merge capabilities, and over a 100 other features that Apple has not added on Pages v5. Many of us continue to use the old Pages ' 09 on El Capitan 10.11.5 v4.3 is superiority on Pages v5.

• More RAM or disk Fusion?

  Hi from Montreal,

  In a few days, I'll buy a new iMac 27 inches (the base 3.2 GHz processor/1 TB of storage). What would be the best update: upgrade to 16 GB SDRam or upgrade to Fusion to 1 disc? I especially surf the internet and make a video 1 or 2 (in a year) with iMovie. Nice day.

  Put a little extra in the reader and some other updates now, and then increase the RAM yourself using a reputable as OWC or Crucial provider.

  https://eShop.MacSales.com/shop/Apple/memory/iMac

  http://www.crucial.com/USA/en/Apple-memory

• Patrician Fusion reader question: MBP2015

  State of play

  In fact, for assistance from apple, but it seems that this form can be connected to a forum, I do not often use apple support.

  Due to an accident with a patrician resizing process, it seems that the matching of hybrid car has been made

  I just tried directions returned to the https://support.apple.com/en-ie/HT202574, the mode of recovery Via Internet > disk utility > repair disk the disk appear in red with the name of the entire virtual disk, underneath it is an icon named disk0 in black and indented below it is an OS X based system in black icon. By selecting all of the virtual disk in red and then repair disk an ALERT says

  After the line titled disk1s2: search Volume headers the following lines are in red

  After what lines starting with the header for invalid volume or invalid Disk Label is read.

  The last line in bold red States,

  Error: This disc needs to be repaired. Click the repair disk, resulting in a never ending cycle

  the statement is included in the log above from the ERD

  The volume Recovery HD seems to be OK. (in green)

  SO THE NEXT STEP seems via terminal

  diskutil list provides useful data

  through terminals diskutil list describes the disk mount points 0, S1, S2 and disc 1 + s1 to s3

  the remaining disk 9 DIS3 list only a mount point. the cursor stops at/dev/disk10

  However I am unclear what should look like the result

  I think I need to move a copy of the recovery of a USB tool before watching

  The following relevant instruction set seems to be

  http://www.TechRepublic.com/article/Pro-Tip-how-to-create-and-disable-a-fusion-d shore.

  But if apple has a script that I can download and add on a usb key with the wizard recovery tool that would save a lot of time.

  I hate the idea of returning the laptop for a repair centre because of a command line command, data it is not a problem here, nor the hardware has been damaged.

  As I see, below, its likely that this form of e-mail does not support Apple, but a forum, so I removed the mention of the serial number of the machine.

  TO answer my own question:
  Problem solved through the procedure described under restore fusion drive

  Via Safari in recovery mode the command-line coded suggested fortunately resolved my hard drive and now is operating system, reinstallation,

  Concerning

  Colm

• Hard drive to SSD/Fusion - a hard drive disk drive SSD/Fusion

  Hello, I own a Mac Mini (end 2012) that to a 1 TB hard drive and 4 GB of RAM, under El Capitan. As you can understand, it begins to slow down... I wanted to know if it was possible to change the HDD pour a Fusion drive or an SSD (may Apple stores do?) or whether it is preferable to add RAM or both? Pour-ins information my computer mainly for watching movies (also by internet TV), text processing, spreadsheets make... Very little treatment of videos/pictures but I wish I could do easily if I need it. Thanks in advance!

  Hi, I got a Mac Mini (end 2012) with a tough, 1 Tb, 4 GB of RAM, running El Capitan and it becomes slow... I wanted to know if it is possible to spend my Hard Drive disk Fusion or a SSD (and if the stores Apple could change?), or if the best thing to do would be to add more RAM or both HD editing and adding RAM? I use my Mac mainly to watch movies (and TV on the Internet), using Word/Excel... I don't use a lot of software like PhotoShop, etc, but I would use it without being stopped after every single when necessary change. Thanks in advance!

  Thinking about getting more memory would be better 4 GB became slow for me with mtn lion upgrade helped a lot

• Have I broke my drive of fusion?

  Hi all

  I have an iMac 27 "end 2013, with a 1 TB fusion drive.

  I had all sorts of problems of implementation of bootcamp - so I decided to take the plunge and reinstalling OS x on my Mac as a clean install - I created a bootable El Capitan installation and booted from it... This is where the problems started.

  Once I started into the USB port, I have created I went into disk utility - with my hat Windows I simply deleted the partition - at this point I got an error message but the partition did disapeer, at this point, it wouldn't let me create a new partition, becomes slightly worried at this point running first aid seemed to fix it I then created a partition for maximum size, named MacHD and installed at El capitan - it then occurred to me maybe that wasn't the best idea with a Fusion drive and no idea how its configuration.

  So my first question is, does what I have done, this 'break' the fusion drive? Is there more I need to do / an easy way to test if the fusion drive works?

  After all that, and once OSX has been back up and running I went to create my install bootcamp (any reason for it anyway!) selected the size I wanted for Windows and instantly get an error "your disk cannot be partitioned - table partitioning error." I went into disk utility to try to create some manually - this errors with "change of the size required for the target disk or a related record is too small. Please try another drive or partition, or make a great change", I get this error no matter how large or small I am the new partition. With this error in mind, I am sure I have something messed up with the fusion drive and I don't know where to start to fix it. Fortunately having just made one new facility making another will not be too much pain. But I would really like to go to bootcamp.

  Thank you

  Marc

  Marc89 wrote:

  Hi all

  I have an iMac 27 "end 2013, with a 1 TB fusion drive.

  I had all sorts of problems of implementation of bootcamp - so I decided to take the plunge and reinstalling OS x on my Mac as a clean install - I created a bootable El Capitan installation and booted from it... This is where the problems started.

  Once I started into the USB port, I have created I went into disk utility - with my hat Windows I simply deleted the partition - at this point I got an error message but the partition did disapeer, at this point, it wouldn't let me create a new partition, becomes slightly worried at this point running first aid seemed to fix it I then created a partition for maximum size, named MacHD and installed at El capitan - it then occurred to me maybe that wasn't the best idea with a Fusion drive and no idea how its configuration.

  So my first question is, does what I have done, this 'break' the fusion drive? Is there more I need to do / an easy way to test if the fusion drive works?

  After all that, and once OSX has been back up and running I went to create my install bootcamp (any reason for it anyway!) selected the size I wanted for Windows and instantly get an error "your disk cannot be partitioned - table partitioning error." I went into disk utility to try to create some manually - this errors with "change of the size required for the target disk or a related record is too small. Please try another drive or partition, or make a great change", I get this error no matter how large or small I am the new partition. With this error in mind, I am sure I have something messed up with the fusion drive and I don't know where to start to fix it. Fortunately having just made one new facility making another will not be too much pain. But I would really like to go to bootcamp.

  Thank you

  Marc

  No software can not break stuff. Backup everything. You must reformat and reinstall OS x Boot of your disk Recover, option + r command to erase and reinstall.

  https://support.Apple.com/en-us/HT201314

  For your backup, I suggest using a software of cloning asSuperDuper! or Double Cloner.

  To clear only choose your recovery partition disk utility and erase. In this way, after deletion of the player and fitness you can just clone OS X back.

• Fusion drive how...?

  Hello

  The other day I saw a post with a link to a Web page on how to create your own Fusion player. In my view, that it may have been an Apple Web page.

  However, I forgot to bookmark.

  Basically, I have a Macbook Pro mid-2012 13 inch Non-retine compatible with having a third of road merger.

  I would like to know what hardware is recommended for the creation of a third party by car merger?

  (1) what hard drive model?

  (2) what SSD model?

  Also can you use boot camp with a third party by car merger?

  You can create more partitions on a drive of Fusion and install OS X, MS-Windows, Linux, etc...

  -Thank you

  The indications that I used to create a Fusion drive in my Mac Pro are located at http://blog.macsales.com/15617-creating-your-own-fusion-drive

  For my SSD, I used the card of mercury Accelsior E2 PCIe SSD and HARD drive, I used a 1 TB drive installed in my Mac Pro. He played very well.

• VMware Fusion 8.0

  I plan to put VMware Fusion 8.0 on my new Mac Mini, so I can run an older version of Quicken for Mac 2006 R7. I have more than 20 years, the Quicken data files and I need to be able to access these files years every so often for the purposes of investment. Didn't like not all of the new version of Quicken for Mac, or any other software of finance personal I tested (they all seem to be cloud online version now), so I went back to the old version of Quicken, which is very stable for me (I just don't let it backup on my internal HD more).

  All the old Quicken files and the program are on my Time Capsule and another hard drive backup external.

  My old Mac Mini still works, but given that the OSX can not be upgraded beyond v. 10.6.8 some programs and Firefox work just not so well, and I was starting to think I have some security issue too.

  I could get another monitor to the old Mini and not allow access to the internet, but it would still need to save every day at least to one of the external drives. Or, I could attach it to my current monitor along the coast the new Mini, using the D - SUB cable. I've never used the D - SUB connection, so not sure how good the view will be if two Minis share the same monitor. If I could afford to buy another monitor, I'd do it, but now, money is tight after the purchase of my new Mini and a new MBP for my daughter who is in College (his old MB was a 2008 model, no place to upgrade more, so it's very, very slow).

  I read here that some people had problems of compatibility with El Capitan and Fusion, so I am wary of load on the new Mini. Are these problems solved?

  When you read about the problems? If you're careful, you can try merge free simply go to their web site to access the free trial version. You can also use VirtualBox which is free. I don't think that you will have problems with the virtual machine.

  Where you might have problems to run older versions of Quicken rather that perhaps in Quicken for Windows in your virtual machine running Windows or just the new version of Quicken for Mac without running a virtual machine. But I don't know much about Quicken.

• "Suitcase Fusion has detected an incompatible version of the Core FM" How can I solve this problem?

  Hi, when I turn on my mac, this note appears: ' SUITCASE FUSION has detected and an incompatible version of the Core FM. "

  Anyone know how to fix this?

  Thank you in advance! :-)

  e-Fusion-has-detected-an-incompatible-version-of-FMCore-Suitcase-Fusion-can-not-continuer https://support.Extensis.com/support/58278/58411/en-us/article/view/818/-Suitcas