7 installation hangs at (43-44 cleaning installation)?

Help please! Trying too install ultimate to windows 7 using the Acer recovery disk, it hangs each time (install cleanup 43-44) anyone can help? It's a G-9630 8951 Acer aspire, thank you

Tags: Acer Laptops

Similar Questions

Vista installation hangs on the end of the installation during clean installation

Hello, I'm having a problem installing a clean installation of Windows Vista Home Basic on Acer laptop from my friend.

For starters, my friend got a red anti virus that has destroyed more or less its windows. After doing a restore of the system for the first available date, the virus had disappeared, but Windows kept asking me how to open simple things like Internet Explorer and various other programs, which means that the OS is unusable. My friend gave me permission to format the drive and I reinstalled Vista with a DVD of my I had to leave one of my PC, but I used the CD key on the laptop. The installation went well, I went on my desktop PC and downloaded all the drivers for his laptop (Aspire 5516), and then installed a sound card driver and an update of the BIOs. After updating the BIOs, the laptop starts again. I tried to do a system restore but it had no restore points, then because I just started, I thought a quick format wouldn't hurt.

This is where things went wrong. I tried to reinstall Vista again, but it keeps hanging on the part "complete installation." I tried three times so far and it always crashes at the same exact part, and now I have no idea what to do.

Any suggestion or help would be appreciated, thanks.

The copy of Vista, I use came from my college that I got for free to be in a computer SCIENCE major. This isn't a particular manufacturer.

EDIT: I apologize for not to say that from the beginning. It is never used because I already had 7 at this time.

In any case, I changed my BIOs native IDE or something of the sort, and I have Vista start. I'm in shock, but I guess that when I flashed the BIOs, it's turned back on it to the wrong setting or something. That's all I can think about.

Predator G6-710 and Oculus Rift

Anyone had success installing installation Oculus Rift VR? I continue to run into errors during installation, and can not pass an installation. "Eyepiece has detected a hardware error that prevents you from implementing your Rift."

I have a strong suspicion that it is USB 3.0 port associated. When I plug the HDMI interface and 2 USB 3.0 ports are discovered and activated, yet when I go to install inside the helmet, I get this error. I tried both USB 3.0 forward ports and ports in the back without success. Same mistake. I even rebooted and Windows came up and reported 'Hang On' while it cleans an error then rebooted and material very well.

Someone at - there one installed yet? Let me know your thing.

Thank you

Well Yes. USB port problem. Both at the front and the other on the back do not work with Oculus. I found a USB 3.0 at the back which seems to work reliably. Holy crap, this thing is amazing...

Load Balancing does not not on 2911

Hello people,

I have some difficulty to operate the Load Balance on my 2911.

I have followed the editing on this site:

http://www.Cisco.com/en/us/Tech/tk648/tk361/technologies_configuration_example09186a0080950834.shtml

and APARENTLY it works, but not in reality, because I see packets using a NAT IPS bot thru, but when I check on the interfaces I see we're not receive / send anything.

Background:

G0/0, I have one ISP, other 1/G0, G0/2 my network.

Building configuration...

Current configuration: 6045 bytes

!

! Last configuration change to 15:47:49 UTC Tuesday, January 28, 2014 by alan

! NVRAM config update at 14:32:59 UTC Tuesday, January 28, 2014 by alan

! NVRAM config update at 14:32:59 UTC Tuesday, January 28, 2014 by alan

version 15.1

horodateurs service debug datetime msec

Log service timestamps datetime msec

encryption password service

!

ROUTER1 hostname

!

boot-start-marker

boot-end-marker

!

!

logging buffered 51200 warnings

!

No aaa new-model

!

!

No ipv6 cef

IP source-route

IP cef

!

!

!

!

dhcp LAN_DHCP_POOL IP pool

network 192.168.0.0 255.255.0.0

default router 192.168.2.2

domain g_bacon

DNS 8.8.8.8 Server 208.67.222.222

0 8 rental

!

!

no ip domain search

IP host ROUTER1 192.168.2.2

8.8.8.8 IP name-server

name-server IP 208.67.222.222

IP-server names 8.8.4.4

IP-server names 208.67.220.220

!

Authenticated MultiLink bundle-name Panel

!

!

Crypto pki token removal timeout default 0

!

Crypto pki trustpoint TP-self-signed-2101532551

enrollment selfsigned

name of the object cn = IOS - Self - signed - certificate - 2101532551

revocation checking no

rsakeypair TP-self-signed-2101532551

!

!

TP-self-signed-2101532551 crypto pki certificate chain

certificate self-signed 01

3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 05050030 A0030201

2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30

69666963 32313031 35333235 6174652D 3531301E 32313137 OF 31323239 170 3131

31335A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D

4F532D53 5369676E 656C662D 43 65727469 66696361 74652 32 31303135 65642D

33323535 3130819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101

8100DEA3 06574FDF B2B2113F 84A1EF39 9969F4D9 04131994 A3FCC466 D0328CCF

B219F1AE A3DCC204 CD993BB2 F59C9A7F C251024E 382162 5 D9277CEB F1A575A5

0356 C 896 A7A1BB48 8EA4CFF6 DA77B72C 9904A73B 6731A6E0 3004E5EA B44C1F7F

5667496C 1E8E603D BE9B1AA1 1065E449 F6110C17 1A5FE3B9 3593BF87 96E14DEC

010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355 87FF0203

551 2304 18301680 14E5F8C8 C30593C3 CEAB1874 F94F070B 9674F152 AD301D06

03551D0E 04160414 E5F8C8C3 0593C3CE AB1874F9 4F070B96 74F152AD 300 D 0609

2A 864886 F70D0101 A 05050003 81810092 51314, 50 EA812CDA AC97A8D1 2CA06BCC

6FD5B4A6 DA888322 E2166AB4 0CF340BB E0407C95 584A1BDF 5DC3A6EE 2862E9CF

7BF0C831 54F06ABF 011664 D 3 75269FF3 02D434BD 0FD15F32 EB34730C 47FE29D9

7C2BBF9D 5BDB1D4F EEBFBED5 9B07450E 83DA57B2 1F296D0A 52D39A8F 6A 679244

05C0924C F3FA9A05 53198E BDB28409

quit smoking

license udi pid CISCO2911/K9 sn FTX1553AJQU

!

!

username privilege 15 secret 5 alan $1$ b6Jk$ 8iz3K3cTUgSZ.VePkKl5a.

!

redundancy

!

!

!

!

!

class-map correspondence-any PROHIBIDAS

Protocol httpwww.facebook.comhost game «»

Protocol httpwww.youtube.comhost game «»

match Protocol http host 'www.pornotube.com.

Protocol http host «www.xvideos.com» game

match Protocol http host 'www.mega.co.nz'.

match Protocol http host 'www.radios-on-line.com.ar'.

match Protocol http host 'www.enlaradio.com.ar'.

Protocol http host «www.cienradios.com.ar» game

match Protocol http host 'www.radios-argentina.com.ar'.

match Protocol http host 'www.fmyam.com.ar'.

Protocol http host «www.piratebay.org» game

class-map match-all P2P

winmx Protocol game

gnutella Protocol game

bittorrent Protocol game

match Protocol kazaa2

!

!

Policy-map DROP_PROHIBIDAS

class PROHIBIDAS

drop

class P2P

drop

!

!

!

!

!

!

!

!

the Embedded-Service-Engine0/0 interface

no ip address

Shutdown

!

interface GigabitEthernet0/0

Fibertel description

DHCP IP address

IP access-group acl101 in

IP access-group out acl101

NAT outside IP

IP virtual-reassembly in

automatic duplex

automatic speed

No cdp enable

out of service-policy DROP_PROHIBIDAS

!

interface GigabitEthernet0/1

Arnet description

IP 186.153.125.138 255.255.255.248

IP access-group acl101 in

IP access-group out acl101

NAT outside IP

IP virtual-reassembly in

automatic duplex

automatic speed

No cdp enable

out of service-policy DROP_PROHIBIDAS

!

interface GigabitEthernet0/2

IP 192.168.2.2 255.255.0.0

IP access-group block_FB in

IP access-group out acl101

IP nat inside

IP virtual-reassembly in

IP tcp adjust-mss 1452

automatic duplex

automatic speed

No cdp enable

!

router RIP

version 2

network 192.168.0.0

!

IP forward-Protocol ND

!

IP http server

IP 8180 http port

20 class IP http access

IP http secure server

IP http timeout policy slowed down 60 life 86400 request 10000

!

IP nat inside source map route address interface GigabitEthernet0/1 overload

IP nat inside source map route fibertel interface GigabitEthernet0/0 overload

IP route 0.0.0.0 0.0.0.0 track GigabitEthernet0/0 123

IP route 0.0.0.0 0.0.0.0 200.122.102.1 254

!

block_FB extended IP access list

deny ip 192.168.0.0 0.0.255.255 welcome 173.252.100.16

deny ip 192.168.0.0 0.0.255.255 173.252.64.0 0.0.63.255

deny ip 192.168.0.0 0.0.255.255 31.13.24.0 0.0.7.255

deny ip 192.168.0.0 0.0.255.255 31.13.64.0 0.0.63.255

deny ip 192.168.0.0 0.0.255.255 66.220.144.0 0.0.15.255

deny ip 192.168.0.0 0.0.255.255 69.63.176.0 0.0.15.255

deny ip 192.168.0.0 0.0.255.255 69.171.224.0 0.0.31.255

deny ip 192.168.0.0 0.0.255.255 74.119.76.0 0.0.3.255

deny ip 192.168.0.0 0.0.255.255 103.4.96.0 0.0.3.255

deny ip 192.168.0.0 0.0.255.255 204.15.20.0 0.0.3.255

IP 192.168.0.0 allow 0.0.255.255 everything

allow an ip

!

access-list 110 permit ip 192.168.0.0 0.0.255.255 everything

!

!

!

!

route allowed fibertel 10 map

corresponds to the IP 110

is the interface GigabitEthernet0/0

!

arnet allowed 10 route map

corresponds to the IP 110

is the interface GigabitEthernet0/1

!

!

!

control plan

!

!

exec banner ^ C ^ C

connection of the banner ^ C ^ C

Banner motd ^ C ^ C

!

Line con 0

local connection

line to 0

line 2

no activation-character

No exec

preferred no transport

transport of entry all

transport output pad rlogin lapb - your MOP v120 udptn ssh telnet

StopBits 1

line vty 0 4

access-class 23 in

privilege level 15

local connection

transport input telnet ssh

line vty 5 15

access-class 23 in

privilege level 15

local connection

transport input telnet ssh

!

Scheduler allocate 20000 1000

end

So far so good, I have check the transactions of NAT:

ROUTER1 #show ip nat trans

Inside global internal local outside global local outdoor Pro

TCP 200.122.102.74:62114 192.168.0.1:62114 17.151.239.110:443 17.151.239.110:443

TCP 200.122.102.74:62119 192.168.0.1:62119 17.172.233.134:5223 17.172.233.134:5223

TCP 200.122.102.74:34945 192.168.0.2:34945 181.30.241.103:443 181.30.241.103:443

TCP 200.122.102.74:37444 192.168.0.2:37444 173.194.42.230:443 173.194.42.230:443

TCP 200.122.102.74:37695 192.168.0.2:37695 181.30.241.109:80 181.30.241.109:80

TCP 200.122.102.74:40662 192.168.0.2:40662 173.194.74.188:5228 173.194.74.188:5228

TCP 186.153.125.138:41426 192.168.0.2:41426 216.115.101.179:443 216.115.101.179:443

TCP 200.122.102.74:41484 192.168.0.2:41484 216.115.101.179:443 216.115.101.179:443

TCP 200.122.102.74:42381 192.168.0.2:42381 181.30.241.31:80 181.30.241.31:80

TCP 186.153.125.138:42553 192.168.0.2:42553 98.136.223.39:8996 98.136.223.39:8996

and I see they're going through the two connections.

Buuuuuuuuuuuuut, when I check the interfaces...

ROUTER1 #show int g0/0

GigabitEthernet0/0 is up, line protocol is up

Material is CN Gigabit Ethernet, the address is c464.1354.b8c0 (BIA c464.1354.b8c0

)

Description: Fibertel

The Internet address is 200.122.102.74/24

MTU 1500 bytes, BW 100000 Kbit/s, DLY 100 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

KeepAlive set (10 sec)

Full-Duplex, 100 Mbps, media type is RJ45

control output stream is XON, control of input stream is XON

Type of the ARP: ARPA, ARP Timeout 04:00

Last entry of 00:00:00, 00:00:00 exit, exit hang never

Final cleaning of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

Strategy of queues: fifo

Output queue: 0/40 (size/max)

5 minute input rate 774000 bps, 161 packets/s

5 minute output rate 423000 bps, 102 packets/s

2133521 package, 1223904205 bytes, 0 no buffer entry

Received 615778 broadcasts (0 of IP multicasts)

0 Runts, 0 giants, 0 shifters

entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

Watchdog 0, multicast 0, break 0 comments

1065308 packets output, 214203455 bytes, 0 underruns

0 output errors, 0 collisions, 1 interface resets

unknown protocol 0 drops

0 babbles, collision end 0, 0 deferred

1 lost carrier, 0 no carrier, interrupt the output of 0

output buffer, the output buffers 0 permuted 0 failures

ROUTER1 #show int g0/1

GigabitEthernet0/1 is up, line protocol is up

Material is CN Gigabit Ethernet, the address is c464.1354.b8c1 (BIA c464.1354.b8c1

)

Description: arnet

The Internet address is 186.153.125.138/29

MTU 1500 bytes, BW 100000 Kbit/s, DLY 100 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

KeepAlive set (10 sec)

Full-Duplex, 100 Mbps, media type is RJ45

control output stream is XON, control of input stream is XON

Type of the ARP: ARPA, ARP Timeout 04:00

Last entry 00:04:01, 00:00:06 exit, exit hang never

Final cleaning of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

Strategy of queues: fifo

Output queue: 0/40 (size/max)

5 minute input rate 0 bps, 0 packets/s

5 minute output rate 0 bps, 0 packets/s

208948 packages, 153515983 bytes, 0 no buffer entry

Received 1236 broadcasts (0 of IP multicasts)

0 Runts, 0 giants, 0 shifters

entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

Watchdog 0, multicast 0, break 0 comments

190283 packets output, 45657373 bytes, 0 underruns

0 output errors, 0 collisions, 0 resets interface

unknown protocol 0 drops

0 babbles, collision end 0, 0 deferred

carrier, 0 no carrier, lost 0 0 interrupt output

output buffer, the output buffers 0 permuted 0 failures

Everything happens through G0/0 and nothing in G0/1!

Any ideas on why this is happening?

Thank you in advance for your help!

Kind regards

Alan

Hello

Yes here you only have a single default route installed (one from the DHCP server) so it can't NAT on the other interface as it can route on this one.

Change your configuration like this:

no ip route 0.0.0.0 0.0.0.0 track GigabitEthernet0/0 123

no ip route 0.0.0.0 0.0.0.0 200.122.102.1 254

IP route 0.0.0.0 0.0.0.0 dhcp

IP route 0.0.0.0 0.0.0.0 200.122.102.1 254

Now if you want to follow the first route look at this document:

http://www.Cisco.com/en/us/docs/iOS/dial/configuration/guide/dia_rel_stc_rtg_bckup.html#wp1065528

Concerning

Alain

Remember messages useful rate.

All Radios in 1142 standalone AP

Hello

I have an AP 1142 with 15.2 (4) JA1 IOS and using the power of Cisco to supply for this unit. On startup, I get % CDP_PD-2-POWER_LOW: all disabled radio - AC_ADAPTOR.

At initialization, I also

PCIE0: link is NOT upward.

PCIE0 port 0 uninitialized

PCIE1: link is NOT upward.

PCIE1 port 1 uninitialized

PCIEx: initialization done

BVI1 is up, line protocol is up

Material is BVI, address is 0022.bd19.19fa (bia 0022.bd19.19fa)

The Internet address is 10.0.0.8/24

MTU 1500 bytes, BW 1000000 Kbps, DLY 5000 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

KeepAlive set (10 sec)

Type of the ARP: ARPA, ARP Timeout 04:00

Last entry of 00:00:30, exit ever, blocking of output never

Final cleaning of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

Strategy of queues: fifo

Output queue: 0/0 (size/max)

5 minute input rate 0 bps, 0 packets/s

5 minute output rate 0 bps, 0 packets/s

17 packages of entry, 1644 bytes, 0 no buffer

Received 0 emissions (0 of IP multicasts)

0 Runts, 0 giants, 0 shifters

errors entry 0, 0 CRC, overgrown plot of 0, 0, 0 ignored, 0 abort

21 packets output, 1884 bytes, 0 underruns

0 output errors, 0 collisions, 0 resets interface

unknown protocol 0 drops

output buffer, the output buffers 0 permuted 0 failures

GigabitEthernet0 is up, line protocol is up

Material is PowerPC405ex Ethernet, the address is 0022.bd19.19fa (BIA 0022.bd19.19

FA)

The Internet address is 10.0.0.7/24

MTU 1500 bytes, BW 1000000 Kbit/s, 10 DLY usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

KeepAlive set (10 sec)

Full-Duplex, 1 Gbps, media type is T

control output stream is not supported, control of input stream is not supported

Type of the ARP: ARPA, ARP Timeout 04:00

Last entry of 00:00:00, 00:00:05 exit, exit hang never

Final cleaning of "show interface" counters never

Input queue: 0, 9355, 0, 0 (size/max/drops/dumps); Total output drops: 0

Strategy of queues: fifo

Output queue: 0/40 (size/max)

5 minute input rate 0 bps, 0 packets/s

5 minute output rate 0 bps, 0 packets/s

packages of 457, 38495 bytes, 0 no buffer entry

Receipt of 402 broadcasts (0 of IP multicasts)

0 Runts, 0 giants, 0 shifters

entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

Watchdog 0, multicast 0, break 0 comments

90 packets output, 10655 bytes, 0 underruns

0 output errors, 0 collisions, 2 interface resets

unknown protocol 0 drops

0 babbles, collision end 0, 0 deferred

carrier, 0 no carrier, lost 0 0 interrupt output

output buffer, the output buffers 0 permuted 0 failures

PCIE0: link is NOT upward.
PCIE0 port 0 uninitialized
PCIE1: link is NOT upward.
PCIE1 port 1 uninitialized
PCIEx: initialization done

Also, when I do not show int

BVI1 is up, line protocol is up
Material is BVI, address is 0022.bd19.19fa (bia 0022.bd19.19fa)
The Internet address is 10.0.0.8/24
MTU 1500 bytes, BW 1000000 Kbps, DLY 5000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
KeepAlive set (10 sec)
Type of the ARP: ARPA, ARP Timeout 04:00
Last entry of 00:00:30, exit ever, blocking of output never
Final cleaning of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0
Strategy of queues: fifo
Output queue: 0/0 (size/max)
5 minute input rate 0 bps, 0 packets/s
5 minute output rate 0 bps, 0 packets/s
17 packages of entry, 1644 bytes, 0 no buffer
Received 0 emissions (0 of IP multicasts)
0 Runts, 0 giants, 0 shifters
errors entry 0, 0 CRC, overgrown plot of 0, 0, 0 ignored, 0 abort
21 packets output, 1884 bytes, 0 underruns
0 output errors, 0 collisions, 0 resets interface
unknown protocol 0 drops
output buffer, the output buffers 0 permuted 0 failures
GigabitEthernet0 is up, line protocol is up
Material is PowerPC405ex Ethernet, the address is 0022.bd19.19fa (BIA 0022.bd19.19
FA)
The Internet address is 10.0.0.7/24
MTU 1500 bytes, BW 1000000 Kbit/s, 10 DLY usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
KeepAlive set (10 sec)
Full-Duplex, 1 Gbps, media type is T
control output stream is not supported, control of input stream is not supported
Type of the ARP: ARPA, ARP Timeout 04:00
Last entry of 00:00:00, 00:00:05 exit, exit hang never
Final cleaning of "show interface" counters never
Input queue: 0, 9355, 0, 0 (size/max/drops/dumps); Total output drops: 0
Strategy of queues: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bps, 0 packets/s
5 minute output rate 0 bps, 0 packets/s
packages of 457, 38495 bytes, 0 no buffer entry
Receipt of 402 broadcasts (0 of IP multicasts)
0 Runts, 0 giants, 0 shifters
entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored
Watchdog 0, multicast 0, break 0 comments
90 packets output, 10655 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
unknown protocol 0 drops
0 babbles, collision end 0, 0 deferred
carrier, 0 no carrier, lost 0 0 interrupt output
output buffer, the output buffers 0 permuted 0 failures

I get no dot11radio interface.

I'm afraid that this access point can have some electrical problems. What can I do?

Thank you

Steven

If you do not see the radio interfaces, I would think that the AP is bad. I would look in to get a RMA number

Steve

Sent by Cisco Support technique iPhone App

GNS3 3745 - no switch connectivity

Hi all

use GNS3, and than switch 16port module. I created an instance of PC and connection to f/0/0, which is a port of layer 3, I can connect through Layer 3 IPs. Then, I reconfigured and connected to the instance of PC through a layer 2 port f2/0 which is part of the switch 16port module. The 16 ports are by default in the vlan 1. I have assigned an IP address of 10.1.9.1/24 to the VLAN and gave the PC 10.1.9.2/24. I can't ping and I can not even ping 10.1.9.1, VLAN 1 IP. Did I miss something? Thank you.

Mark Sargent

Router #sh worm

Cisco IOS Software, software 3700 (C3745-SPSERVICESK9-M), Version 12.4 (19), RELEASE SOFTWARE (fc1)

Router #ping 10.1.9.1

Type to abort escape sequence.

Send 5, echoes ICMP 100 bytes to 10.1.9.1, time-out is 2 seconds:

.....

Success rate is 0% (0/5)

Router #sh arp

Protocol of age (min) address Addr Type Interface equipment

Internet 10.1.9.1 - c402.2668.0000 ARPA Vlan1

Router #sh ip int br

Interface IP-Address OK? Method State Protocol

FastEthernet0/0 unassigned YES manual up up

Serial0/0 YES no not defined administratively down down

FastEthernet0/1 no YES not defined administratively down down

Serial0/1 no YES not defined administratively down down

FastEthernet2/0 not assigned YES unset up towards the bottom

FastEthernet2/1 no YES undefined upward to the bottom

FastEthernet2/2 no YES undefined upward to the bottom

FastEthernet2/3 no YES undefined upward to the bottom

FastEthernet2/4 no YES undefined upward to the bottom

FastEthernet2/5 no YES undefined upward to the bottom

FastEthernet2/6 no YES undefined upward to the bottom

FastEthernet2/7 no YES undefined upward to the bottom

FastEthernet2/8 YES no not set up down

FastEthernet2/9 no YES undefined upward to the bottom

FastEthernet2/10 YES no undefined up down

FastEthernet2/11 no undefined upward down YES

FastEthernet2/12 no YES undefined upward to the bottom

FastEthernet2/13 no undefined upward down YES

FastEthernet2/14 no undefined upward down YES

FastEthernet2/15 no YES undefined upward to the bottom

Vlan1 10.1.9.1 YES manual downwards upwards

Router #sh int f2/0 switchport

Name: Fa2/0

Switchport: enabled

Administrative mode: static

Operational mode: down

Encapsulation of administrative circuits: dot1q

Negotiating Trunking: disabled

The VIRTUAL LAN access mode: (default) 1

Native mode VLAN Trunking: 1 (default)

VLAN Trunking enabled: ALL

Assets of VLAN Trunking: no

Priority for unmarked frames: 0

Override the priority tag vlan: FALSE

The voice of VLAN: no

The unit trust: no

Ports of status for the name of VLAN

---- -------------------------------- --------- -------------------------------

1 active default 0/Fa2 Fa2/1, Fa2/2 Fa2/3

FA2/4 Fa2/5, 6/Fa2 Fa2/7

FA2/8, 9/Fa2, Fa2/10, Fa2/11

FA2/12 Fa2/13, 14/Fa2 Fa2/15

active by default fddi 1002

assets of token-ring-default 1003

1004 fddinet - default active

1005 trnet - default active

Network type VLAN SAID MTU Parent RingNo BridgeNo Men BrdgMode Trans1 Trans2

---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

1 100001 1500 enet - 1002 1003

1002 101002 1500 fddi - 1 1003

1003 b 1005 1500 101003 0-1 1002 srb

1004 etnbdf 1500 101004 - 1 ibm - 0 0

1005 trnet 101005 1500 - 1 ibm - 0 0

Router #sh int vlan 1

Vlan1 is up, line protocol is down

Material is EtherSVI, the address is c402.2668.0000 (bia c402.2668.0000)

The Internet address is 10.1.9.1/24

MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

Type of the ARP: ARPA, ARP Timeout 04:00

Last entry, never, never hang output

Final cleaning of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

Strategy of queues: fifo

Output queue: 0/40 (size/max)

5 minute input rate 0 bps, 0 packets/s

5 minute output rate 0 bps, 0 packets/s

0 packets input, 0 bytes, 0 no buffer

Received 0 broadcasts, 0 Runts, 0 Giants 0 shifters

entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

12 bags of output, 890 bytes, 0 underruns

output 0 error, 1 interface resets

unknown protocol 0 drops

output buffer, the output buffers 0 permuted 0 failures

you need to change cable

share this i must configure the interface in this way:

int fa2/0

SW mo VAC

SW acc vla 1

SH

only HS

end

!

WR

!

Take care

Alessio

Problems created during the removal of the registry?

While using any third-party registry error Fixer software.., I always find that my windows get defective... so I need to reinstall my windows... new, so my question is why every time there is a mistake in my registry and when try to repair it why my windows get crashed?

The registry requires no maintenance. Its best to avoid the reg cleaners.

And for the computer hanging question, try a clean boot.

Perform a clean boot to determine if background programs interfere with your game or program

http://support.Microsoft.com/kb/331796

IOS Tunnel interface. Size of the NEGATIVE queue?

When I do a 'show int' on my tunnel interface, I see a NEGATIVE queue size. Is it normal or I see a bug in the IOS?

Router #sho int tunnel1

Tunnel1 is up, line protocol is up

Material is Tunnel

The Internet address is 172.16.14.2/30

MTU 1514 bytes, BW 600 Kbit, DLY 500000 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation TUNNEL, loopback not set

KeepAlive not set

Source xxx.xx.xxx.xx (FastEthernet4), destination yyy.yyy.yy.yy tunnel

Tunnel protocol / transport GRE/IP, off key, off sequencing

TTL 255 tunnel

Disabled packages, quick tunneling active parity check

Tunnel of transmission bandwidth 8000 (Kbps)

Tunnel to receive 8000 (Kbps) bandwidth

Last entry of 00:00:00, 00:00:00 exit, exit hang never

Final cleaning of "show interface" counters 00:15:14

Queue entry :-542544/75/0/0 (size/max/drops/dumps); Total output drops: 0

Strategy of queues: fifo (pre-ranking QOS)

Output queue: 0/0 (size/max)

5 minute input rate 0 bps, 0 packets/s

5 minute output rate 0 bps, 0 packets/s

packages of 1499, 148506 bytes, 0 no buffer entry

Received 0 broadcasts, 0 Runts, 0 Giants 0 shifters

errors entry 0, 0 CRC, overgrown plot of 0, 0, 0 ignored, 0 abort

My config tunnel isn't something special...

Tunnel1 interface

bandwidth 600

IP 172.16.14.2 255.255.255.252

IP 1400 MTU

IP pim sparse - dense mode

QoS before filing

source of tunnel FastEthernet4

destination yyy.yyy.yy.yyy tunnel

Looks like a software defect. The closest I could find is Bug ID CSCed86842.

http://www.Cisco.com/cgi-bin/support/Bugtool/onebug.pl?BugID=CSCed86842&SUBM

I hope it helps.

Kind regards

Arul

Slow EtherChannel?

Hello

I have 2x2950s and 2x3550s putting in place etherchannels between them. Everything looks ok, but the speed is always around 100 Mbps, even if there are a of the trunks 2xFE everywhere.

I tried to isolate, connecting 2x2950s all - even, I get 100 Mbps max...

My basic topology:

PC with a NIC - 2950 GB - 2950 - PC with a Go

Results of Iperf:

[4] 172.16.1.144 local port 5001 connected with 172.16.1.28 port 51554

[4] 0, 0 - dry 10.0 102 Mbps 85.4 MB

[4] 172.16.1.144 local port 5001 connected with 172.16.1.28 port 51675

[4] 0, 0 - dry 10.0 107 MB 89.3 Mbps

I tried to change the PO/active - always the same ports. When I connect these PCs to the same 2950 switch using two gigabit ports, I get:

[4] 0, 0 - dry 10.0 390 MB 327 Mbps

I also tried to copy to PC3 to both PC1 and PC2, at the same time to ensure that she can balance the load - unfortunately I was getting 5-6 Mbps for each connection only

I missed something obvious?

My config and show the basic commands:

SWITCH1

#sh Switch1 run int po1

Building configuration...

Current configuration: 207 bytes

!

Interface Port - Channel 1

ETHERCHANNEL description

switchport vlan trunk native 2

switchport trunk allowed vlan 1-4 991 002-1005

switchport mode trunk

switchport nonegotiate

FlowControl send

end

#sh Switch1 run int f0/18

Building configuration...

Current configuration: 190 bytes

!

interface FastEthernet0/18

switchport vlan trunk native 2

switchport trunk allowed vlan 1-4 991 002-1005

switchport mode trunk

switchport nonegotiate

active in mode channel-group 1

end

#sh Switch1 run int f0/19

Building configuration...

Current configuration: 190 bytes

!

interface FastEthernet0/19

switchport vlan trunk native 2

switchport trunk allowed vlan 1-4 991 002-1005

switchport mode trunk

switchport nonegotiate

active in mode channel-group 1

end

Switch1 #sh ethe

Switch1 #sh su etherchannel

Switch1 #sh etherchannel summary

Flags: D - low P - port-channel

I have - autonomous s - suspended

H Eve (LACP only)

R - Layer 3 S - Layer2

u - unfit to tied selling

U - running f - cannot allocate an aggregator

d default port

Number of channels: 1

Number of aggregators: 1

Protocol for the Port-Channel port group

------+-------------+-----------+----------------------------------------------

1 Po1 (SU) LACP Fa0/18 (P) Fa0/19 (Pd)

Switch1 #sh int po1

Port-channel 1 is up, line protocol is up (connected)

Material is EtherChannel, address is 0009.43ae.ce13 (bia 0009.43ae.ce13)

Description: ETHERCHANNEL

MTU 1500 bytes, BW 200000 Kbit, DLY 1000 usec,

reliability 255/255, txload 5/255, rxload 1/255

Encapsulation ARPA, loopback not set

Full-duplex, 100 MB/s, media type is the unknown media type

input stream control is turned off, output flow control is disabled

Members in this channel: Fa0/18 Fa0/19

Type of the ARP: ARPA, ARP Timeout 04:00

Last entry at 00:01:23, 00:00:00 exit, exit hang never

Final cleaning of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

Strategy of queues: fifo

Output queue: 0/40 (size/max)

5 minute input rate 89000 bps, 172 packets/s

5 minute output rate 4495000 bps, 354 packets/s

2831392 package, 2669151653 bytes, 1056 no input buffer

Received 36665 broadcasts (29399 multicast)

0 Runts, 0 giants, 0 shifters

entry 0, 0 CRC errors, frame 0, 0, saturation, ignored 1056

Watchdog 0, multicast 29399, break 0 comments

entry packets 0 with condition of dribble detected

2885680 packets output, 3152464741 bytes, 0 underruns

0 output errors, 0 collisions, 1 interface resets

0 babbles, collision end 0, 0 deferred

carrier, 0 no carrier, lost 0 0 output BREAK

output buffer, the output buffers 0 permuted 0 failures

SWITCH2

SWITCH2 #sh run int po1

Building configuration...

Current configuration: 206 bytes

!

Interface Port - Channel 1

ETHERCHANNEL description

switchport vlan trunk native 2

switchport trunk allowed vlan 1-4 991 002-1005

switchport mode trunk

switchport nonegotiate

FlowControl send

end

SWITCH2 #sh run int f0/18

Building configuration...

Current configuration: 190 bytes

!

interface FastEthernet0/18

switchport vlan trunk native 2

switchport trunk allowed vlan 1-4 991 002-1005

switchport mode trunk

switchport nonegotiate

active in mode channel-group 1

end

SWITCH2 #sh run int f0/19

Building configuration...

Current configuration: 190 bytes

!

interface FastEthernet0/19

switchport vlan trunk native 2

switchport trunk allowed vlan 1-4 991 002-1005

switchport mode trunk

switchport nonegotiate

active in mode channel-group 1

end

#sh su ethe SWITCH2

Flags: D - low P - port-channel

I have - autonomous s - suspended

H Eve (LACP only)

R - Layer 3 S - Layer2

u - unfit to tied selling

U - running f - cannot allocate an aggregator

d default port

Number of channels: 1

Number of aggregators: 1

Protocol for the Port-Channel port group

------+-------------+-----------+--------------------------------------------

1 Po1 (SU) LACP Fa0/18 (Pd) Fa0/19 (P)

#sh int po1 SWITCH2

Port-channel 1 is up, line protocol is up (connected)

Material is EtherChannel, address is 000a.b7dd.3d12 (bia 000a.b7dd.3d12)

Description: ETHERCHANNEL

MTU 1500 bytes, BW 200000 Kbit, DLY 1000 usec,

reliability 255/255, txload 1/255, rxload 4/255

Encapsulation ARPA, loopback not set

Full-duplex, 100 MB/s, media type is the unknown media type

input stream control is turned off, output flow control is disabled

Members in this channel: Fa0/18 Fa0/19

Type of the ARP: ARPA, ARP Timeout 04:00

Last entry of 00:00:00, 00:02:58 exit, exit hang never

Final cleaning of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

Strategy of queues: fifo

Output queue: 0/40 (size/max)

5 minute input rate 3268000 bps, 254 packets/s

5 minute output rate 56000 bps, 117 packets/s

2896053 package, 3157891899 bytes, 0 no buffer entry

Received 33572 broadcasts (28209 multicast)

0 Runts, 0 giants, 0 shifters

entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

Watchdog 0, multicast 28204, break 0 comments

entry packets 0 with condition of dribble detected

2755632 packets output, 2612593705 bytes, 0 underruns

0 output errors, 0 collisions, 1 interface resets

0 babbles, collision end 0, 0 deferred

carrier, 0 no carrier, lost 0 0 output BREAK

output buffer, the output buffers 0 permuted 0 failures

Well your ports located in the channel of the port are 100Meg ports so certainly you will get no more 100Meg out of it. When you perform a method on the default channel port load balancing switch is CBC - mac. Which means that if PC1 has a x.x.x MAC and this is the source of all data might exceed the first link. Now, if you add another PC with a MAC of y.y.y that might exceed the second link. Top of the line past offers better and more granular load balancing of methods such as mac source and destination or IP, ports etc.

Configuration of the Cisco etherchannel stack: flag stuck in stand alone

I'm putting in place an etherchannel for my stack of Cisco (switch Catalyst 3750 G x 2), with a port on each switch the etherchannel. The example of battery cross http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00806cb982.shtml using as a guide, I created my channel. However when I discovered "show etherchannel summary 6 ' it says that both my ports are stand-alone, when I want them to be in port channel grouped in. Thank you in advance for your help, I added all the information I could think.

Here is how I created the etherchannel

sailing-sw-1 #conf t

sailing-sw-1 (config) #interface gigabiteethernet 0/1/10

active in sail-sw-1(config-if) mode #channel-group 6

sailing-sw-1(config-if) #switchport trunk encapsulation dot1q

sailing-sw-1(config-if) #switchport mode trunk

sailing-sw-1(config-if) #exit

sailing-sw-1 (config) #interface gigabiteethernet 0/1/10

active in sail-sw-1(config-if) mode #channel-group 6

sailing-sw-1(config-if) #switchport trunk encapsulation dot1q

sailing-sw-1(config-if) #switchport mode trunk

sailing-sw-1(config-if) #exit

sailing-sw-1 (config) #exit

The running-config

sailing-sw-1 #show running-config

Building configuration...

Current configuration: 5390 bytes

!

version 12.2

no service button

horodateurs service debug uptime

Log service timestamps uptime

no password encryption service

!

sailing-sw-1 hostname

!

boot-start-marker

boot-end-marker

!

Select the 5 secret...

!

!

!

high-level description of the cisco-global macro

No aaa new-model

1 supply ws-c3750g-24ts switch

2 available ws-c3750g-24ts switch

mtu 1500 routing system

Uni-directional aggressive

!

!

!

MLS qos map cos-dscp 0 8 16 24 32 46 46 56

!

Crypto pki trustpoint TP-self-signed-538118016

enrollment selfsigned

name of the object cn = IOS - Self - signed - certificate - 538118016

revocation checking no

rsakeypair TP-self-signed-538118016

!

!

TP-self-signed-538118016 crypto pki certificate chain

certificate self-signed 01

30...

AF

quit smoking

!

!

!

errdisable recovery cause link-flap

60 errdisable recovery interval

port-channel - the balance of the load src-dst-mac

!

spanning tree mode rapid pvst

spanning tree default loopguard

No spanning tree optimize transmission of bpdus

spanning tree extend id-system

!

internal allocation policy of VLAN ascendant

!

!

!

Interface Port-channel6

!

GigabitEthernet1/0/1 interface

No auto mdix

!

interface GigabitEthernet1/0/2

No auto mdix

!

interface GigabitEthernet1/0/3

No auto mdix

!

interface GigabitEthernet1/0/4

No auto mdix

!

interface GigabitEthernet1/0/5

No auto mdix

!

interface GigabitEthernet1/0/6

!

interface GigabitEthernet1/0/7

No auto mdix

!

interface GigabitEthernet1/0/8

No auto mdix

!

interface GigabitEthernet1/0/9

No auto mdix

!

interface GigabitEthernet1/0/10

switchport trunk encapsulation dot1q

switchport mode trunk

No auto mdix

active in mode channel-group 6

!

interface GigabitEthernet1/0/11

No auto mdix

!

interface GigabitEthernet1/0/12

No auto mdix

!

interface GigabitEthernet1/0/13

No auto mdix

!

interface GigabitEthernet1/0/14

No auto mdix

!

interface GigabitEthernet1/0/15

No auto mdix

!

interface GigabitEthernet1/0/16

No auto mdix

!

interface GigabitEthernet1/0/17

No auto mdix

!

interface GigabitEthernet1/0/18

No auto mdix

!

interface GigabitEthernet1/0/19

No auto mdix

!

interface GigabitEthernet1/0/20

No auto mdix

!

interface GigabitEthernet1/0/21

No auto mdix

!

interface GigabitEthernet1/0/22

No auto mdix

!

interface GigabitEthernet1/0/23

No auto mdix

!

interface GigabitEthernet1/0/24

No auto mdix

!

interface GigabitEthernet1/0/25

!

interface GigabitEthernet1/0/26

!

interface GigabitEthernet1/0/27

!

interface GigabitEthernet1/0/28

!

GigabitEthernet2/0/1 interface

No auto mdix

!

interface GigabitEthernet2/0/2

No auto mdix

!

interface GigabitEthernet2/0/3

No auto mdix

!

interface GigabitEthernet2/0/4

No auto mdix

!

interface GigabitEthernet2/0/5

No auto mdix

!

interface GigabitEthernet2/0/6

!

interface GigabitEthernet2/0/7

No auto mdix

!

interface GigabitEthernet2/0/8

No auto mdix

!

interface GigabitEthernet2/0/9

No auto mdix

!

interface GigabitEthernet2/0/10

switchport trunk encapsulation dot1q

switchport mode trunk

No auto mdix

active in mode channel-group 6

!

interface GigabitEthernet2/0/11

No auto mdix

!

interface GigabitEthernet2/0/12

No auto mdix

!

interface GigabitEthernet2/0/13

No auto mdix

!

interface GigabitEthernet2/0/14

No auto mdix

!

interface GigabitEthernet2/0/15

No auto mdix

!

interface GigabitEthernet2/0/16

No auto mdix

!

interface GigabitEthernet2/0/17

No auto mdix

!

interface GigabitEthernet2/0/18

No auto mdix

!

interface GigabitEthernet2/0/19

No auto mdix

!

interface GigabitEthernet2/0/20

No auto mdix

!

interface GigabitEthernet2/0/21

No auto mdix

!

interface GigabitEthernet2/0/22

No auto mdix

!

interface GigabitEthernet2/0/23

No auto mdix

!

interface GigabitEthernet2/0/24

No auto mdix

!

interface GigabitEthernet2/0/25

!

interface GigabitEthernet2/0/26

!

interface GigabitEthernet2/0/27

!

interface GigabitEthernet2/0/28

!

interface Vlan1

the IP 192.168.0.1 255.255.255.0

!

default IP gateway - 192.168.76.102

IP classless

IP http server

IP http secure server

!

activate the IP sla response alerts

!

!

Line con 0

line vty 0 4

password Mil19

opening of session

line vty 5 15

password Mil19

opening of session

!

end

Interface port-channel 6

(in the example, there should be this line "identified in this channel: Gi2/article-gi1/0/10 0 / 10 ')

sailing-sw-1 #show interfaces port-channel 6

Channel6 port is down, line protocol is down (notconnect)

Material is EtherChannel, address is 0000.0000.0000 (bia 0000.0000.0000)

MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

KeepAlive set (10 sec)

Link auto-duplex type, automatic speed is automatic, media type is unknown

input stream control is turned off, output flow control is not supported

Type of the ARP: ARPA, ARP Timeout 04:00

Last entry, never, never hang output

Final cleaning of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

Strategy of queues: fifo

Output queue: 0/40 (size/max)

5 minute input rate 0 bps, 0 packets/s

5 minute output rate 0 bps, 0 packets/s

0 packets input, 0 bytes, 0 no buffer

Received 0 emissions (0 multicasts)

0 Runts, 0 giants, 0 shifters

entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

Watchdog 0, multicast 0, break 0 comments

entry packets 0 with condition of dribble detected

exit 0 packets, 0 bytes, 0 underruns

0 output errors, 0 collisions, 1 interface resets

0 babbles, collision end 0, 0 deferred

carrier, 0 no carrier, lost 0 0 output BREAK

output buffer, the output buffers 0 permuted 0 failures

EtherChannel 6 Summary

sailing-sw-1 #show etherchannel 6 Summary

Flags: - Low P - D bundled in port-channel

I have - autonomous s - suspended

H Eve (LACP only)

R - Layer 3 S - Layer2

U - running f - cannot allocate an aggregator

M - don't use, minimum contacts not satisfied

u - unfit to tied selling

w waiting to be aggregated

d default port

Number of channels: 1

Number of aggregators: 1

Protocol for the Port-Channel port group

------+-------------+-----------+-----------------------------------------------

6 Po6 (SD) LACP Gi1/0/10 (I) Gi2/0/10 (I)

Hello

It seems that the grouping of NIC Linux box does not work properly. Please

Check on the side of Linux.

Kind regards

NT

Random Tunnel IPSec Packet drops

Hi experts,

I am trying to solve a problem of fall of random package for tunneling IPSec between two VTI. For more than a month, we could not see not any question, and from today, we have 30% through a tunnel packet loss IPSec.

After analysis, I have concluded that packet loss is located somewhere on the way to the uc520 to the 2921. Package account see the correctly on the output interface physics uc520, but the number of packets is low on the interface of penetration on the 2921.

Pings outside of the tunnel by the way are very good.

I also deleted the tunnels on both ends and after they have recovery, the question was always present.

Pointers on research where packets get lost?

RR-hq-2921 #ping 10.1.13.1 g0/1 source rep 100

Type to abort escape sequence.

Send 100, echoes ICMP 100 bytes to 10.1.13.1, wait time is 2 seconds:

Packet sent with a source address of 10.1.1.1

!!..!.!!!!!!!!!..!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

..!!.!!!!!!!!!!!.!!!!!!!!.!!!!

Topology:

[uc520] == HAVE == {{{cloud}}} == MODEM == [2921]

Test:

Claire 2921 # counters g0/0

Disable "show interface" counters on this interface [confirm]

% CLEAR-5-COUNTERS: claire counter on interface GigabitEthernet0/0

Execute on uc520: ping source timeout 0 rep 4000

This is supposed to increase rapidly the number of packets at a distance of 4000 packages, as it has done on the output uc520 interface

# 2921 sho int g0/0 | I entered the packages

3348 packets input, 607812 bytes, 0 no buffer< missing="" ~650="">

# 2921 sho int g0/0

GigabitEthernet0/0 is up, line protocol is up

Material is CN Gigabit Ethernet, the address is XXXXXXXX

Description: Outdoors - WAN port

The Internet address is XXX.XXX.XXX.XXX/YY

MTU 1500 bytes, BW 35000 Kbit/s, 10 DLY usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

KeepAlive set (10 sec)

Full-Duplex, 1 Gbps, media type is RJ45

control output stream is XON, control of input stream is XON

Type of the ARP: ARPA, ARP Timeout 04:00

Last entry of 00:00:00, 00:00:00 exit, exit hang never

Final cleaning of the counters 'show interface' 00:00:42

Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

Strategy of queues: fifo

Output queue: 0/40 (size/max)

30 second entry rate 75000 bps, 51 packets/s

exit rate of 30 seconds 77000 bps, 52 packets/s

3456 packets input, 619794 bytes, 0 no buffer

Received 0 emissions (0 of IP multicasts)

0 Runts, 0 giants, 0 shifters

entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

Watchdog 0, multicast 0, break 0 comments

3454 packets output, 632194 bytes, 0 underruns

0 output errors, 0 collisions, 0 resets interface

unknown protocol 0 drops

0 babbles, collision end 0, 0 deferred

carrier, 0 no carrier, lost 0 0 interrupt output

output buffer, the output buffers 0 permuted 0 failures

Good infor

Now, did you ask your ISP if they made the last changes made?

I think that your suspcious is correct and if the number of packets do not match, then probably something in the environment has changed, since it worked before with the same configuration and IOS versions.

HTH.

Calculation of value tx rx bandwidth

Hello

Can someone help, how to calculate the bandwidth utlization of "sh int' details..?"

Can the percentage will get calculated from values tx rx... ?

I use the lease line 4 Mbit/s.

FastEthernet0/0/0 is up, line protocol is up

Material is FastEthernet, address is 001a.6c70.4b14 (bia 001a.6c70.4b14)

Description: Internet connection

The Internet address is 1.1.1.1/30

MTU 1500 bytes, BW 4000 Kbit, DLY 100 usec,

reliability 255/255, txload 31/255, rxload 120/255

Encapsulation ARPA, loopback not set

KeepAlive set (10 sec)

Full-duplex, 100 MB/s, 100BaseTX/FX

Type of the ARP: ARPA, ARP Timeout 04:00

Last entry of 00:00:00, 00:00:00 exit, exit hang never

Final cleaning of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

Strategy of queues: fifo

Output queue: 0/40 (size/max)

5 minute input rate 828000 bps, 111 packages/s

5 minute output rate 498000 bits/s, packets/s 92

788931865 packets input, 4036778275 bytes

Received 398 broadcasts, 0 Runts, 0 Giants 0 shifters

entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

Guard Dog 0

entry packets 0 with condition of dribble detected

571607354 packets output, 3639639717 bytes, 0 underruns

Thanks in advance,

Kind regards

Emilie Thakare

Disclaimer

The author of this announcement offers the information in this publication without compensation and with the understanding of the reader that there is no implicit or explicit adequacy or adaptation to any purpose. Information provided is for information purposes only and should not be interpreted as making the professional advice of any kind. Use information from this announcement is only at risk of the reader.

RESPONSIBILITY

Any author will be responsible for any damage that it (including, without limitation, damages for loss of use, data or profits) arising out of the use or inability to use the information in the view even if author has been advised of the possibility of such damages.

Poster

There are several ways to do it, but if your link is 4 Mbps, use the statement of bandwidth on the interface and the value 4000 (I seem to remember that he uses K, if it is not correct value would be 4000000).

So when you look at the tx or rx loads, those are the load reports. for example, 128/255 = 50%, 64/255 = 25%.

Cisco 861 DHCP + public static IPs + NAT/DNAT. Help.

Hello

I used to use a server of self-made CentOS for intranet for my small office, but I have bouth a few days ago a router Cisco 861 to replace the linux machine.

My needs:

1. I have 2 public classes of IP from my ISP. 1 class is limitted 80mbit upload, the other to 30mbit upload. So I need some sort of DNAT to be able to know exactly what intranet computer uses internet great and including a single internet limitted.

2. I need DHCP server with static IP addresses (a computer must always have the same IP address, etc)... I have my needs for this.

3. also I need external access to certain servers on the inside (web, ftp, etc.)

Parameters:

(Dhcp) intranet: 10.11.12.x 255.255.255.0)

1 public Internet: 89.45.204.118 255.255.255.248 (89.45.204.117 as gateway)

Public Internet 2: some other class in the same IP (assume 89.45.204.58/24 for example)

DNS: 89.45.200.1

So far so good, everything seems simple and I can do this in 2 hours on a centos linux box (correct roads, active ip Routing and some rules for NAT/SNAT/DNAT iptables).

But on this new router of Centos... Well, I am not yet able to ping the outside world, nor inside world I'm tired reading the forums, documentation... I want (at the beginning) to a simple scenario: vlan + dhcp, SEA4 with 1 public ip address and ACCESS to the real world. I was not able to reach even not that much.

OK, first of all, here is a copy of the running configuration:

Building configuration...

Current configuration: 5826 bytes

version 15.1

no service button

horodateurs service debug datetime msec

Log service timestamps datetime msec

no password encryption service

!

hostname cisco861

!

boot-start-marker

boot-end-marker

!

!

enable secret 5 [out-of-context]

activate the password [out-of-context]

!

No aaa new-model

iomem 10 memory size

Crypto pki token removal timeout default 0

!

Crypto pki trustpoint TP-self-signed-2459631067

enrollment selfsigned

name of the object cn = IOS - Self - signed - certificate - 2459631067

revocation checking no

rsakeypair TP-self-signed-2459631067

!

!

TP-self-signed-2459631067 crypto pki certificate chain

certificate self-signed 01

[deleted-of-context]

quit smoking

IP source-route

!

!

DHCP excluded-address IP 10.11.12.1

DHCP excluded-address IP 10.11.12.251 10.11.12.254

!

IP dhcp pool cisco861-iasi

import all

Network 10.11.12.0 255.255.255.0

domain cisco861.iasi

DNS-server 10.11.12.1 89.45.200.1

router by default - 10.11.12.1

-NetBIOS 10.11.12.2 name server 10.11.12.3

!

IP dhcp pool testPC

the host 10.11.12.111 255.255.255.0

0100.c030.1012.09 client identifier

testpc-01 customer name

!

!

IP cef

IP domain name cisco861.iasi

name of the IP-server 89.45.200.1

!

!

license udi pid CISCO861-K9 sn [out-of-context]

!

!

username admin secret of privilege 15 4 [removed-of-context]

!

!

interface FastEthernet0

no ip address

!

interface FastEthernet1

no ip address

!

interface FastEthernet2

no ip address

!

interface FastEthernet3

no ip address

!

interface FastEthernet4

external description $ ETH - LAN$

IP 89.45.204.118 255.255.255.248

NAT outside IP

IP virtual-reassembly in

full duplex

automatic speed

!

interface Vlan1

Description $ETH - SW - LAUNCH, INTF-INFO-HWIC $$ $4ESW

10.11.12.1 IP address 255.255.255.0

IP nat inside

IP virtual-reassembly in

IP tcp adjust-mss 1452

!

IP forward-Protocol ND

IP http server

23 class IP http access

local IP http authentication

IP http secure server

IP http timeout policy slowed down 60 life 86400 request 10000

!

overload of IP nat inside source list 23 interface FastEthernet4

IP route 0.0.0.0 0.0.0.0 89.45.204.117

!

access-list 23 permit 10.11.12.0 0.0.0.255

Dialer-list 1 ip protocol allow

SNMP-Server RO community cisco861.Iasi

!

Line con 0

local connection

line to 0

line vty 0 4

access-class 23 in

privilege level 15

password [out-of-context]

local connection

transport input telnet ssh

!

end

(I couldn't find any CODE or a QUOTE as on other forums... so I tried to indent the config for you guys)

In addition, here are a few troubleshooting commands I used, maybe they can help some of know you what is the problem

cisco861 #show ip interface brief

Interface IP-Address OK? Method status Prot

Commissioner of official languages

FastEthernet0 unassigned YES unset upward, upward

FastEthernet1 unassigned YES unset down down

FastEthernet2 unassigned YES unset down down

FastEthernet3 unassigned YES unset down down

FastEthernet4 89.45.204.118 YES manual up up

NVI0 89.45.204.118 YES unset upward, upward

Vlan1 10.11.12.1 YES manual up up

cisco861 #show mac-address-table

Port of destination address Destination address Type VLAN

------------------- ------------ ---- --------------------

dynamic xxxx.xxxx.xxxx 1 FastEthernet0

XXXX.xxxx.xxxx Self 1 Vlan1

ODD: it has no mac address for the connected FastEthernet 4. How comes? I changed 3 cables. All cables are OK.

cisco861 #show ip route

Code: L - local, C - connected, S - static, mobile R - RIP, M-, B - BGP

D - EIGRP, OSPF, IA - external EIGRP, O - EX - OSPF inter zone

N1 - type external OSPF NSSA 1, N2 - type external OSPF NSSA 2

E1 - OSPF external type 1, E2 - external OSPF of type 2

i - IS - Su - summary IS, L1 - IS - IS level 1, L2 - IS level - 2

-IS inter area, * - candidate failure, U - static route by user

o - ODR, P - periodic downloaded route static, H - PNDH, l - LISP

+ - replicated road, % - next hop override

Gateway of last resort is 89.45.204.117 to network 0.0.0.0

S * 0.0.0.0/0 [1/0] via 89.45.204.117

10.0.0.0/8 is variably divided into subnets, 2 subnets, 2 masks

C 10.11.12.0/24 is directly connected, Vlan1

L 10.11.12.1/32 is directly connected, Vlan1

89.0.0.0/8 is variably divided into subnets, 2 subnets, 2 masks

C 89.45.204.117/29 is directly connected, FastEthernet4

L 89.45.204.118/32 is directly connected, FastEthernet4

#show FastEthernet 4 router interfaces

FastEthernet4 is up, line protocol is up

Material is PQII_PRO_UEC, the address is xxxx.xxxx.xxxx (bia xxxx.xxxx.xxxx)

Description: external$ ETH - LAN$

The Internet address is 89.45.204.118/29

MTU 1500 bytes, BW 100000 Kbit/s, DLY 100 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

KeepAlive set (10 sec)

Full-duplex, 100 MB/s, 100BaseTX/FX

Type of the ARP: ARPA, ARP Timeout 04:00

Last entry at 00:02:54, 00:00:00 exit, exit hang never

Final cleaning of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

Strategy of queues: fifo

Output queue: 0/40 (size/max)

5 minute input rate 0 bps, 0 packets/s

5 minute output rate 0 bps, 0 packets/s

28 sachets of entrance, 3909 bytes

Received 14 emissions (0 of IP multicasts)

0 Runts, 0 giants, 0 shifters

entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

Guard Dog 0

entry packets 0 with condition of dribble detected

output of 110 packages, 25366 bytes, 0 underruns

0 output errors, 0 collisions, 3 interface resets

unknown protocol 0 drops

0 babbles, collision end 0, 0 deferred

1 lost carrier, 0 no carrier

output buffer, the output buffers 0 permuted 0 failures

interfaces of router #show vlan 1

Vlan1 is up, line protocol is up

Material is EtherSVI, the address is xxxx.xxxx.xxxx (bia xxxx.xxxx.xxxx)

Description: $ETH - SW - LAUNCH$ $INTF - INFO - HWIC-$4ESW

The Internet address is 10.11.12.1/24

MTU 1500 bytes, BW 100000 Kbit/s, DLY 100 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

KeepAlive not supported

Type of the ARP: ARPA, ARP Timeout 04:00

Last entry of 00:00:06, output ever, blocking exit ever

Final cleaning of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

Strategy of queues: fifo

Output queue: 0/40 (size/max)

5 minute input rate 0 bps, 0 packets/s

5 minute output rate 0 bps, 0 packets/s

packets of 512, 53381 bytes, 0 no buffer entry

Received 185 broadcasts (0 of IP multicasts)

0 Runts, 0 giants, 0 shifters

entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

exit 180 packages, 13248 bytes, 0 underruns

output 0 error, 1 interface resets

unknown protocol 0 drops

output buffer, the output buffers 0 permuted 0 failures

Also, I tried other combinations, as follows
1. IP route static inter-vfr
2. IP default-gateway 89.45.204.117 (ofc combined with no ip Routing). I can ping 8.8.8.8 in this scenario, but not other IP addresses. WTF?
3. network default IP 89.45.204.117 (the bridge) - nothing
4. 89.45.204.118 default IP network - bothing
5. IP route 0.0.0.0 0.0.0.0 FastEthernet 4 (with or without 89.45.204.117, with or without permanent keyword)
Please, have mercy and help me.

P.S. I've also attached the configuration and troubleshooting files if it will be easier for you to follow this path.

A big thank you and God bless you!

Hello

IP nat inside source static 10.11.12.33 89.45.204.120 (host - to - host)

IP nat inside source static tcp 10.11.12.33 80 89.45.204.120 80 (port translation host-to - host)

RES

Paul

Please don't forget to rate this post if it has been helpful.

Exception [TOPLINK-48] several writable mappings exist for field

Hi all
I am quite new to JPA and Toplink and I try to write simple using toplink essentials JPA application as the persistence however, provider when I comppile the code, get the errors below saying that several writable mappings exist for a field that is [J2EEUSER. BANKS. BRANCH_ADDR_POSTCODE]. The thing is, I have not tried map this field i.e. J2EEUSER. BANKS. BRANCH_ADDR_POSTCODE to multiple cards, so I'm a little confused as to why I get this error. I have attached all the code and error messages associated with. I was hoping that someone will be able to help

The error is
Runtime Exceptions:
---------------------------------------------------------
; nested exception is:
javax.persistence.PersistenceException: Exception [TOPLINK-0] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (06/12/2007))): oracle.toplink.essentials.exceptions.IntegrityException
Exceptions of descriptor:
---------------------------------------------------------

Exception [TOPLINK-48] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (06/12/2007))): oracle.toplink.essentials.exceptions.DescriptorException
Description of the exception: several writable mappings exist for the field [J2EEUSER. BANKS. BRANCH_ADDR_POSTCODE]. Only one can be defined as writable, all others must be specified read-only.
Mapping: oracle.toplink.essentials.mappings.DirectToFieldMapping [branch_Addr_Road_Name-> J2EEUSER. BANKS. BRANCH_ADDR_POSTCODE]
Descriptor: RelationalDescriptor (com.gworx.Bank-> [DatabaseTable (J2EEUSER. BANKS)])

Exception [TOPLINK-48] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (06/12/2007))): oracle.toplink.essentials.exceptions.DescriptorException
Description of the exception: several writable mappings exist for the field [J2EEUSER. BANKS. BRANCH_ADDR_POSTCODE]. Only one can be defined as writable, all others must be specified read-only.
Mapping: oracle.toplink.essentials.mappings.DirectToFieldMapping [bankName-> J2EEUSER. BANKS. BRANCH_ADDR_POSTCODE]
Descriptor: RelationalDescriptor (com.gworx.Bank-> [DatabaseTable (J2EEUSER. BANKS)])

Exception [TOPLINK-48] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (06/12/2007))): oracle.toplink.essentials.exceptions.DescriptorException
Description of the exception: several writable mappings exist for the field [J2EEUSER. BANKS. BRANCH_ADDR_POSTCODE]. Only one can be defined as writable, all others must be specified read-only.
Mapping: oracle.toplink.essentials.mappings.DirectToFieldMapping [branch_Addr_Locality-> J2EEUSER. BANKS. BRANCH_ADDR_POSTCODE]
Descriptor: RelationalDescriptor (com.gworx.Bank-> [DatabaseTable (J2EEUSER. BANKS)])

Exception [TOPLINK-48] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (06/12/2007))): oracle.toplink.essentials.exceptions.DescriptorException
Description of the exception: several writable mappings exist for the field [J2EEUSER. BANKS. BRANCH_ADDR_POSTCODE]. Only one can be defined as writable, all others must be specified read-only.
Mapping: oracle.toplink.essentials.mappings.DirectToFieldMapping [branch_Addr_City-> J2EEUSER. BANKS. BRANCH_ADDR_POSTCODE]
Descriptor: RelationalDescriptor (com.gworx.Bank-> [DatabaseTable (J2EEUSER. BANKS)])

Exception [TOPLINK-48] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (06/12/2007))): oracle.toplink.essentials.exceptions.DescriptorException
Description of the exception: several writable mappings exist for the field [J2EEUSER. BANKS. BRANCH_ADDR_POSTCODE]. Only one can be defined as writable, all others must be specified read-only.
Mapping: oracle.toplink.essentials.mappings.DirectToFieldMapping [branchName--> J2EEUSER. BANKS. BRANCH_ADDR_POSTCODE]
Descriptor: RelationalDescriptor (com.gworx.Bank-> [DatabaseTable (J2EEUSER. BANKS)])

Exception [TOPLINK-48] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (06/12/2007))): oracle.toplink.essentials.exceptions.DescriptorException
Description of the exception: several writable mappings exist for the field [J2EEUSER. BANKS. BRANCH_ADDR_POSTCODE]. Only one can be defined as writable, all others must be specified read-only.
Mapping: oracle.toplink.essentials.mappings.DirectToFieldMapping [branch_Addr_Postcode-> J2EEUSER. BANKS. BRANCH_ADDR_POSTCODE]
Descriptor: RelationalDescriptor (com.gworx.Bank-> [DatabaseTable (J2EEUSER. BANKS)])

Exception [TOPLINK-46] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (06/12/2007))): oracle.toplink.essentials.exceptions.DescriptorException
Description of the exception: there should be a mapping not only reading set for the primary key field [J2EEUSER. ACCOUNTS. SORTCODE].
Descriptor: RelationalDescriptor (com.gworx.Account-> [DatabaseTable (J2EEUSER. ACCOUNTS)])

The entity class is

package com.gworx;
import java.io.Serializable;

import javax.persistence.*;
import javax.persistence.CascadeType;

@Entity
@IdClass(BankPK.class)


@Table(name = "BANKS", schema = "J2EEUSER")
public class Bank implements Serializable {
     

     
     /**
      * 
      */
     private static final long serialVersionUID = 1L;

     @Id
     @Column(name = "BRANCH_SORTCODE", nullable = false, precision = 6, insertable=false, updatable=false)
     long sortcode;
     
     @Basic()
     @Column(name = "BANK_NAME", nullable = false, insertable=false, updatable=false)
     String  bankName;
     
     @Basic()
     @Column(name = "BRANCH_NAME", nullable = false, insertable=false, updatable=false)
     String branchName;
     
     @Basic()
     @Column(name = "BRANCH_ADDR_HOUSE_NAME", nullable = false, insertable=false, updatable=false)
     String branch_Addr_House_Name;
     
     @Basic()
     @Column(name = "BRANCH_ADDR_ROAD_NAME",nullable = false, insertable=false, updatable=false)
     String branch_Addr_Road_Name;
     @Basic()
     @Column(name = "BRANCH_ADDR_LOCALITY", nullable = false, insertable=false, updatable=false)
     String branch_Addr_Locality;
     @Basic()
     @Column(name = "BRANCH_ADDR_CITY",nullable = false, insertable=false, updatable=false)
     String branch_Addr_City;
     @OneToOne(cascade=CascadeType.ALL)
     @Basic()
     @Column(name = "BRANCH_ADDR_POSTCODE", nullable = false)
     String branch_Addr_Postcode;
     
     public Bank(){}
     
     public Bank(
                    String bankName,
          String branchName,
          long sortcode,
          String  branch_Addr_House_Name,
              String  branch_Addr_Road_Name,
              String  branch_Addr_Locality,
              String  branch_Addr_City,
              String  branch_Addr_Postcode)

                 { 
          this.bankName=bankName;
          this.sortcode=sortcode;
          this.branchName = branchName;
                     this.branch_Addr_House_Name=branch_Addr_House_Name;
          this.branch_Addr_Road_Name=branch_Addr_Road_Name;
          this.branch_Addr_Locality=branch_Addr_Locality;
          this.branch_Addr_City=branch_Addr_City;  
          this.branch_Addr_Postcode=branch_Addr_Postcode;
          
     }
     
     public void setSortcode(long sortcode){
          this.sortcode =sortcode;
     }
     
     public long getSortCode(){
          return this.sortcode;
     }

The PK class is

public class BankPK implements Serializable {
     
     public long sortcode;

     public BankPK(long sortcode){
          this.sortcode = sortcode;
     }

     public boolean equals(Object obj){
          
          if(obj==null || !(obj instanceof BankPK)){
          
               return false;
          }
          else if (((BankPK)obj).sortcode ==sortcode)
          return true;
          else
               return false;
          
     }
     
     public int hashCode(){

          StringBuffer buff = new StringBuffer();
          buff.append(sortcode);
          int hashCode =buff.hashCode();
          return hashCode;
     }
     

}

My bean of stateless session that I use to create to create the entity is

package com.gworx;

import javax.ejb.Local;

import javax.ejb.Stateless;
import javax.persistence.*;
import javax.ejb.Remote;
import com.gworx.BankBeanRemote;



/**
 * Session Bean implementation class BankBean
 */
@Stateless

public class BankBean implements BankBeanRemote {

    /**
     * Default constructor. 
     */
     
     
     @PersistenceContext
     
     
     EntityManager entMgr;
     //public Bank bank; 
     
     public Account account;
     
     long sortcode, cust_id;
     
     //Bank Details
     String  bankName,branchName,branch_Addr_House_Name,
     branch_Addr_Road_Name,branch_Addr_Locality, 
     branch_Addr_City,  branch_Addr_Postcode;
     
     
     //Customer specific Details
     String cust_Surname,cust_Middlename,cust_Forename,
     cust_Addr_HouseName,cust_Addr_RoadName,
     cust_Addr_Locality,cust_Addr_City,cust_Addr_PostCode;
     
    public BankBean() {
        // TODO Auto-generated constructor stub
    //     entMgr=emf.createEntityManager();
    }

   
   public void  make_A_Bank(
             String bankName,
              String branchName,
              long sortcode,
              String  branch_Addr_House_Name,
              String  branch_Addr_Road_Name,
              String  branch_Addr_Locality,
              String  branch_Addr_City,
              String  branch_Addr_Postcode
              )

                               {
             this.sortcode=sortcode;
             this.bankName =bankName;
             this.branchName = branchName;
                     this.branch_Addr_House_Name=branch_Addr_House_Name;
          this.branch_Addr_Road_Name=branch_Addr_Road_Name;
          this.branch_Addr_Locality=branch_Addr_Locality;
          this.branch_Addr_City=branch_Addr_City;  
          this.branch_Addr_Postcode=branch_Addr_Postcode;
          
          Bank bank = new Bank( bankName,branchName,sortcode,branch_Addr_House_Name,
                    branch_Addr_Road_Name,branch_Addr_Locality, 
                    branch_Addr_City,  branch_Addr_Postcode);
          entMgr.persist(bank);
          
          //return bank;
    }


public void make_An_Account(Bank bank, Customer customer, long accNum,
          AccountType accType) {
     
     Bank tempbank = entMgr.find(Bank.class, bank.getSortCode());
     Customer  tempcust=entMgr.find(Customer.class, customer.getCustomerPK());
     Account acc = new Account(tempbank, tempcust, accNum, accType );
     entMgr.persist(acc);
     
     //return acc;
}


public void make_A_Customer(String cust_Surname,
          String cust_Middlename, String cust_Forename,
          String cust_Addr_HouseName, String cust_Addr_RoadName,
          String cust_Addr_Locality, String cust_Addr_City,
          String cust_Addr_PostCode) {
     
     
     Customer cust = new Customer(cust_Surname,cust_Middlename,cust_Forename,
               cust_Addr_HouseName,cust_Addr_RoadName,
               cust_Addr_Locality,cust_Addr_City,cust_Addr_PostCode);
     
     entMgr.persist(cust);
     
     //return null;
}


public void make_A_Bank() {
     // TODO Auto-generated method stub
     
}
    
    
}

The client application is

package com.gworx.client;
import javax.ejb.EJB;

import com.gworx.BankBeanRemote;

public class BankClient {

     /**
      * @param args
      */
@EJB 
private  static BankBeanRemote testbean;

public BankClient(){
     
}
     public static void main(String[] args) {
          // TODO Auto-generated method stub
               
                    testbean.make_A_Bank(
                    "Test_Bank_Name", 
                    "Test_Bank_Branch_Name", 
                    010102,
                    "Test_House",
                    "Test_Road_Name", 
                    "Test_branch_Locality", 
                    "Test_branch_City", 
                    "E2 8DY");
          System.out.println("Bank Created, Check DB tables to verify creation!!");
     }

}

Thank you

Published by: Geedo on July 16, 2009 10:06

It seems that you still have the ear old hang out. Maybe clean your server or build/deploy directory.

Repeated failed installs Ko 977074, 978506, 978506. O/s of hanging in the journal began or pass the user's request.

OK, here's my story:

Windows 7 Home Premium, solid running, since 13/10/09

History of failure of 974431 update that the next day, he managed without my taken part troubleshooting. No complaints since more about 1 week ago got a BSoD outside no where while my child is on a restricted user account using IE. Has not returned since, but suffice it to say.

So now it's 26/01/10 and an update to install Windows Defender K915597 with success. Cool deal. It end tonight here and he says it is to install the updates and then stops. Next day:

1/27 - KB976972 failed

1/27 - KB978506 failed

1/27 - KB977074 failed

1/27 - KB976972 failed

1/27 - KB978506 failed

1/27 - KB977074 failed

1/27 - office Live add-in 1.4 successful

1/27 - KB976972 failed

1/27 - driver update successful

1/27 - KB977074 failed

1/27 - KB976972 failed

1/27 - KB978506 failed

1/27 - KB977074 failed

See a pattern here? So I should also mention that all of a sudden if I click log off or switch users while one of these updates says waiting and not pass/fail it hangs on Please wait... I waited about 10 minutes (normally it's about 10 seconds for the newspaper and immediate to change user) then have to restart the computer or force the feeding cycle. So I decided to uncheck the Group of updates and just try one at a time through the automatic updates.

Wait what he...

1/28 - KB976972 successful

1/28 - KB978506 successful

1/28 - KB977074 successful

1/28 - KB915597 successful (Windows Defender again)

Hooray! life is good again!

It end tonight here and he said please wait... Configuration of windows or something like this. Odd. Given that all of the updates succeeded and I had no updates available message. Well it stops down.

On the morning. Please wait while windows configures (or other) updates failed returning changes. What updates? They managed you cursed!

29/1 - KB976972 failed (what Wait. What?)

1/29 - KB978506 failed (what Wait. What?)

1/29 - KB977074 failed (what Wait. What
?)
1/30 - KB976972 failed

1/30 - KB978506 failed

1/30 - KB977074 failed

1/30 - KB978506 failed (me trying just the update to the compatibility mode)

1/31 - KB977074 failed (my download and try to install the update manually)

So there is some sort of timeline for what it's worth. So basically three updates repeatedly failing and play with my head. Here are the error codes for each of them:

Update for Internet explore 8 Compatibility View List for Windows 7 (KB978506)

Installation status: failed

Error details: Code 80004004

Update for Windows 7 (KB977074)

Installation status: failed

Error details: Code 80004004

Update for Windows 7 (KB976972)

Installation status: failed

Error details: Code 80004004

More potentially useful data. I have manually install a (977074), said she is successful and I want to reboot, Yes, please wait windows configuration, stops, comes up, please wait configuration updates, no error, log, look at the history of the update, says "pending" 977074 next, I reboot on mine, please wait windows configuration, stop , rises, please wait for configuration updates, UPDATES COULD not return changes, allows me to connect... She does it every time.

So I think I'll just deselect all and hide updates, screw it right? I don't really have the situations these difficulty going home anyway. So all deselected. No found update, green check in Windows doesn't update. Everything is cool. Stop this night here, please wait windows configuration, stops, appears, wait for updated configuration to update, UPDATES FAIL back.

And yet, he is suspended when the logoff or switch user thing.

Seriously. What is going on?

Hello

First, install the system tool using the link provided: http://support.microsoft.com/default.aspx/kb/947821

Then, run boot.

To help troubleshoot error messages and other issues, you can try to troubleshoot this issue with a clean boot to see if we can identify a program or driver causing the problem you are experiencing.
A clean boot to start Windows with some programs and drivers off or on selection. By doing this through trials and errors we can hopefully identify a specific cause of this problem. Here's how to solve problems with a clean boot:

Clean clean boot.

1. click on start, type msconfig in the search box and press ENTER.
The user account control permission.
If you are prompted for an administrator password or confirmation, type
password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load starting points.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.

If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:

http://support.Microsoft.com/kb/929135

Reset the computer to start as usual.

When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
When you are prompted to restart the computer, click on restart.

When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

1. click the Start button, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
2. on the general tab, click the Normal startup option, and then click OK.
3. When you are prompted to restart the computer, click on restart.

If you are still experiencing a problem, try the following:

I suggest to download the update manually and install it. Use the link below to download the update.

http://www.Microsoft.com/downloads/details.aspx?FamilyId=6711bec7-130F-4244-A13C-675bd9e42298&displaylang=en

If this does not resolve the issue, I suggest you to reset windows update by following the steps listed in the article below:

How to reset the Windows Update components?

http://support.Microsoft.com/kb/971058

You can also use the "Fix it" described in the article above solution.

For more information on August 2009 Windows Vista and Windows Server 2008 Application Compatibility Update, follow this link:

http://support.Microsoft.com/default.aspx/KB/972036

Thank you, and in what concerns:

I. Suuresh Kumar-Microsoft Support.

Visit our Microsoft answers feedback Forumand let us know what you think.

7 installation hangs at (43-44 cleaning installation)?

Similar Questions

Maybe you are looking for