700-HP ENVY 010xt lights blink during sleep. Is this normal?

Similar Questions

• The new iPhone 7, display lights on the move - is this normal?

  I just bought an iPhone 7.  Whenever I pick it up the screen lights up before I hit the home button.  Is this normal?

  I guess that when I'm carrying it, it will keep light upward, and then jump.

  Yes, it is a new feature in iOS 10 called "Raising to wake", where you can check the notifications on the lockscreen without hitting the power button / stop or the "home" button.  I don't know if I like it or not, but I currently have always it turned on.

  To disable this option, go to settings, display and brightness and toggle the revival to Wake OFF.

  I played around with it a bit, and it activates especially when moved from horizontal to vertical (for example pick up placed on a desk), but no say, low vertical, high portrait.  So depending on how you wear the phone (pants pocket, Pocket jacket, holster, backpack, etc.), it may or may not turn on unintentionally.

• my power cord is hot during charging is this normal?

  I am currently in the Mexico, I noticed my power cord for my Macbook Air is EXTREMELY hot during charging.  I never noticed this before and wonder if maybe it's dangerous for the computer.  Also, is this normal?

  Please respond by email as I'm not sure how to get back on the community site to find the answer

  I am very new on this

  ********

  Thank you!

  Michelle

  < Email published by host >

  Wire or the charger itself.

• ENVY 17: Laptop wakes from sleep several times during the day

  My laptop did this during the last two weeks.

  When I put on standby, he wakes up after a couple hours stay on for a few minutes and go back to sleep. This process is repeated again and again. In the event logs, the wake-up source is unkonow. There is no wake timers activated, and no device is allowed to wake the computer.

  After many expenses hours working on this and read almost everything done online, I'm stuck. How should I proceed?

  Solved.

  There was a problem with the fast start-up of Intel who woke up my comuter. The solution was to disable it.

• TX2517ca, will not start - blue LED - Num Lock &amp; Lock lights blink.

  laptop just decided NOT to start a day... I can hear the fan and HARD drive activity minimal. I tried the Hard reset as directed by HP and removed the battery etc...  lights blink at the exact same time, stay on for 1 second and off for 3 seconds and then Flash simultaneously again and does not stop until I pull the power, there is no clicking, grinding, beep, nothing, nothing on the screen at all. The rest of the lighted buttons are lit in blue.

  FYI, I am a 15... computer technician home based at this time. so I pulled the memory, cleaned, air-dried to compress (1 GB & 2 GB), 2 of them and blue on the slots and reinstall even by only 1 at the time, no change, same result, flashing of the LED. Then I pulled just the hard disk connected to another machine as an external HARD drive, it works fine, I see the C drive and the disc of recovery without any problem. so at this point, I just shot from the card pile and leave for a while see if we can clear the BIOS/CMOS (I was wondering if the software is stuck in hibernation or sleep setting and when turn is only back to the similar condition, but represent no display on the screen...) so far points to CPU I think. Then after having replaced existing hard drive and try to start if it does not work, I have a blank hard drive to work I can insert to the hell of it... stay tuned...

  Also system Oh, hair Immaculate, not collected or dust in the ports of fan etc...

  Hello
  Click on the link below:
  LED white screen error codes

• MacBook Pro stops during sleep

  My MBP 15 "mid-2015 retina stop completely during sleep. Often when I get back to my MBP, I have to start from scratch because it stopped during sleep. There is no message in the log to indicate why it closed and no error messages or indications of kernel panic. Sometimes the power and battery and with or without the lid closed. Latest OS X with all updates applied.

  Reset the SMC (and NVRAM) does not help. Apple Diagnostics is no problem, and Genius Bar suggested I have first of all to make an OS X install excessive, then a clean install because they believe that it is a software problem. I tried to install too, and it made no difference. Pure install then, but I delayed, because it involves a lot of work in store again my work environment and data, it is not useless in current state - it's just a problem of waiting for the start up and then restore whatever, I was working on the last.

  Any advice?

  There is no message in the log to indicate why it closed.

  There could be.

  Wait until the Mac stops unexpectedly, and then check your system.log file to identify the numeric code associated with the stop. Read below.

  Locate the Console application - it is located in your utilities folder and looks like this

  

  You can find it by selecting utilities in the Finder go menu.

  Open the Console.

  If the list of newspapers on the left column is not already displayed, view journal list by selecting view list of newspapers on display menu of the Console.

  Locate system.log in the list, and then select it. Many date and time-stamped entries will appear, hundreds of them, and you need to find the relevant entries to your Mac problem.

  Do that type the word cause stop in the field filter on the top right of the Console window.

  Who will do all the log entries be hidden, except for entries that contain these words. There will be a numeric code associated with the entry of journal from «Cause of previous stop» What is this code?

• Satelite L775 used high power - orange light blinks 5 times

  Greetings,

  I bought my Toshiba Satelight new l775 7 months ago, it's so crazy. It used to be on, I use the laptop connected to the adapter 4 to 8 hours a day, then the laptop goes unused and unplugged for 16 to 20 hours a day.

  This is my 3rd phone, I know that I put more tension on the previous two (HP and Acer). I've never had a laptop go on me this quick, even this acer laptop $ 300 crossed more tension and never went out in the 15 months that I got it.

  My laptop backup is a HP of 4 years, I've had it for 4 years, its fell several times, used and abused still underway! I just had to level of ram and hard drive. But, this Toshiba! She was so beautiful when I saw him!

  I have never dropped it, never spilled something on it, so why she put me through that stress at a bad time?

  A bad time because even if I'm under warranty, I'm leaving on vacation in 2 days! I need it, I'm not trying to take my old HP that came out in 2008.

  I can't afford to send my Toshiba for 2 weeks, not immediately.

  Today, my anti-virus software was his typical scheduled scan, I didn't charge the laptop, because I was out of work, so when I leave the laptop gets used more and charged additionally. I look at the laptop and its judgment, I just thought, O... my battery died, I would plug in the adapter and do some reading. Nothing good happened. 8 hours later, I worked on it for more than 8 hours, I searched all over google, many forums, none of the following solutions worked for me.

  Disconnect the battery and press power for 30 seconds
  Unplug the adapter and press power for 30 seconds
  Disconnect the battery and the adapter and press power for 30 seconds

  (of course after the 30 sec thing, I tried turns on normally, with or without battery and power adapter).

  I pulled the little battery round, hard drive, memory sticks (even changed the 2 around and I tried each one solo) I tried without any ram. I unplugged all the excess material, the only extra things I had was my usb mouse, but I unplugged that, even pulled the CD-ROM drive.

  I removed all water-cooling, open the laptop to see if I saw something a coward, I don't see anything, the part where the adapter will seem a little loose, but it seems to go all the way and fine. I pushed hard and still nothing.

  One thing I will say... I read at least 8 other fairly new poster of Toshiba satellite owners with similar problems of their laptop does not turn on. This isn't a good glance, since this is the first product of Toshiba, that I bought it and it costs $500 more than my acer laptop which gave me no problem in my 15 months of owning...
  I'm not belittling Toshiba immediately, this problem might be a small question (I hope), I could be my fault, so I'm not belittling Toshiba again because I like a lot about this laptop, especially the graphics!

  Return to this topic after watching the discussions of people with similar problems, I noticed, nobody had the same exact problem I'm having. See most of the threads I have read, people would still get the orange light when the battery has been driven. I ONLY get the orange light when the battery is in the laptop. I try and power without the battery and nothing happens, no light flashes. Many other people were always other color lights or lights in different locations, my only light flashes 5 times, the second place left and is orange.

  The only light that blinked in the last 8 hours is the second light from the left (I think it's the power light) and it flashes orange or maybe its red light... but when I press the power (I tried holding, tapping, etc...) that the orange light blinks 5 times and stops, nothing happens I don't hear any readers of spinning, everything is just dead.

  Thanks for the time and help!

  Hi a8000

  Looks like you already tried all possible solutions
  The flashing light indicates that there is a possible hardware failure, but it is not possible to say what part is malfunctioning, it might be the motherboard
  However, the guarantee seems to be valid so don t waste time and report it to the service provider in your country, they should solve this Toshiba!

• HP Officjet Pro 8600: Power light blinking and can't turn on or off

  Printer has power light blink and wll not turn on or off

  [Moved from comments]

  Hi neuserivergirl,

  1. have you made changes on the computer before this problem?

  2. which version of the operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can disconnect the power cable from the plug, and then try to turn on or off.

  It seems to be a hardware problem, I suggest you contact the manufacturer of the printer for assistance on this issue.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

• HP 5400 printer light blinks, but does not print

  HP 5400 printer light blinks, but does not print

  Hello theguttu,

  We will try to uninstall then reinstall the printer in a specific way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver with the latest version of the Brother's Web site.

  4 reinstall the printer.

  Also, here are some references of printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Best regards

  Matthew_Ha

• P1102w: P1102w - orange light blinking - won't initialize

  My printer won't boot and the orange light blinks. I tried to uninstall and reinstall the printer driver and firmware.  It also shows 'it can run out of toner' when I know that it is not. Cannot print page of test or anything else that he does not communicate with the computer. Help!

  Hey @cbloom57,

  Welcome to the Forums of HP Support!

  I understand that you have an orange light flashing on your Laserjet P1102w printer range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute. If you still see a flashing light orange, then the printer is more likely to have a recoverable hardware problem. This document explains How to resolve error lights on the printer.

  Please let me know the results after following the above. If you are able to clear the blinking light, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Iconia A-730, WIFI lost password during sleep and in the distance.

  My Acer Iconia A-730 loses its WIFI password during sleep & timeless... I have to re - enter the password evrytime.

  Do you have any WIFI settings, not go. Contacted Acer and Rep did exactly what I did with the same results, sent 'how to connect wireless' & refered me here for community help.  HELPPPPPP... :-( Min, I would like to know how to copy / paste the password using the tablet itself... ;-)

  have you tried long your WiFi on the shelf and choose ignore/remove and then reconnect it.

  This is a bug of android of which appears from time to time.

  another choice is to try a factory data reset but you will lose all your personal data, you must first backup.

  backup of the settings / & reset - Reset data

• LaserJet Professional P 1102w printer green light blinking, but will not be printed

  I had my P of professional LaserJet 1102w for a little less than a year.  I use it very rarely and very slightly (I've probably printed total less than 25 pages).  It has always worked well.

  But in the last 2 weeks, it stopped printing.  The Green led comes on, but it will not be printed.

  I went through the troubleshooting diagnostic tests on my computer (HP Pavilion, Windows 7 operating system).  The result shows that my computer detects a problem, but it cannot identify it (for example, no paper jam, no toner, etc..).  I manually checked it for a paper jam too.  I have not seen any problems.  I turned off, unplugged, he turned his back.  She still does not print.  And now the green light blinks, even if I turn it off several hours ago.

  Help, please.  Thank you.

  Update: I realized what it was.  My USB cable was very slightly loose.  I don't see when I checked manually the printer the first time.  But I checked a second time and just pushed him tighter.  Problem solved.

• Power light blinking XPS 8900

  I bought my XPS8900 a few weeks ago and immediately upgraded the memory up to 32 GB.

  Everything worked fine, but then I decided to upgrade the video card to an EVGA GeForce GTX970 SSC.

  This card requires a 6 and a power connector 8 pin that does not provide the power supply Dell stock. So rather that to return the video card, I have improved the power supply to a Corsair CX750M, I've read that other XPS8900 users have had success with this machine.

  As others have pointed out, this PSU is a tight fit, but I could get installed it. As soon as I turned on, my trouble started.

  The case and CPU fans spin, I hear the rotation of the drive upward, and I can open and close the dvd tray. So I know that the power supply provides at least a power. But I get no video, and on the top of the box, the power LED flashes amber model.

  I tried to go back to the video card and power supply dell stock, but still have exactly the same problem.

  I also tried unplugging the power cable and power for 30 seconds button. But still, the power light flashes orange model.

  I know there is no beep codes for the 8900 XPS and the sequence of flashing orange light power is used to diagnose the problem, but I was not able to locate any reference to indicate trends.

  The power light blinks a 2-7 model and repeats.

  Anyone know what this means?

  Follow-up:

  I had ripped all with no luck. Well, everything except the improved memory. He had worked, so I don't think that it would be necessary to remove it. But I was wrong.

  I went back to the memory of stock and the blinking orange light problem disappeared!

  Then I reinstalled the new memory, and it worked too!

  So I guess it was just that the memory should be seen.

  Not sure if the model of 2-7 means 'Question' memory, but this would be my guess.

  Since the 8900 XPS does not support beep codes, I hope that Dell will eventually publish what mean flashing light patterns.

• Has conducted an assessment of WEI, and, the window according to the analysis is complete, but progress seems to be about 95% and wrote "this may take a few minutes. Your screen may blink during the process.

  Original title: WEI

  I recently did a full scan of the system with all the tools available and used windows manufacturer to scan the hard drive, HARD drive program. Everything is cleaned up and updated. I conducted an assessment of WEI, and the window said the analysis is complete, but advances seem to be about 95% and wrote "this could take a few minutes. Your screen may blink during the process. "It was about 20 minutes so far and the box on the bottom, said"Cancel ". I'm going to be it, but ask yourself what can be the issue. Any help/ideas would be appreciated.

  Yes, I think that he / she forgot to mail the scanner :)

  The link I posted has a Mr. fixit for me on this matter use you it?

  You can scan with mbam free :/

  https://www.Malwarebytes.org/antimalware/

• How to keep the USB to USB UPS during sleep (Win 7 64)?

  Hello:

  Still no response to painful problem with connection to UPS for sleep loss system.

  New desktop (Dell Studio XPS 8100; Intel Core i-7 860 2.8 GHz processor; Win 7 Ult 64; 8 GB OF RAM; ATI Radeon HD 5770, etc.).
  Brand new APC Back UPS XS1300LCD w/power falling Personal Edition v. 2.2. (Win7 compatible).

  As with my old system to Vista Ult SP2 (32 bit), sleep cut power supply for USB devices, including the UPS.
  Thus, if a failure occurs during sleep, the APC software could not perform his managed system shutdown.
  Which defeats the purpose of having the inverter with its software to stop.

  TS: the manufacturer of my computer (Dell) and APC were useless.

  The only viable solution "circumvention" of Vista has been to implement a diet plan that NEVER put the HDD to sleep.  Not a very good solution, but at least it allowed UPS to stop software do its job failure.

  Apparently, it is the only solution for Win 7, as well.
  Or is it?

  If I disable the USB selective suspend in the settings for a plan power which puts the HDD to sleep, will be this or do not solve the problem and allow the computer to maintain the power (and the link with) the UPS during sleep?

  Help, please. I'm not too computer savvy, but I hope it * is * a more satisfactory solution to this problem.

  I have assigned to these forums several times in recent weeks, but never seem to get an answer.

  Thanks in advance,

  daledoc1 Desktop 1: Win 7 Ult (64); Office 2: Win Vista Ult SP2 (32); Laptop: Win 7 Pro (32);

  Hello

  Follow these steps and check if that helps:
  1. go to start and type in Device Manager in the start search box and press on enter.
  2. in Device Manager, right click on the USB device and select Properties
  3. click on power management, then uncheck to Turn off energy-saving and activate the option to wake up from its sleep.

  You can try to disable USB selective suspend and check if it solves the problem. Disabling this option has corrected the problems of connection with the devices USB mode 'sleep' for many users.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.