7110 wide: unable to connect printer via wireless or wired methods

Similar Questions

• Unable to connect to other wireless networks

  RE: Unable to connect to other wireless networks

  • My computer is a HP Pavilion dv7 1232nr Entertainment Center
  • My OS is Windows Vista 64 bit
  • I have installed many things over the past year, but know that at some point, I was able to get on free Wi - Fi in hotels

  I am able to connect to my network, but when I try to connect to others, I'm unable to do. I have their password and my computer SHOWS I have a connection, but actually I'm not. When I try to connect to the Internet, the server is not found. I called the support/supplier for the last network owner and he told me that even if I "thought" I was online, I really wasn't. He said that it is probably a router configuration for that person that does not correspond to my computer. As I was just visiting, of course I didn't mess with their router. This happened to me twice, with once the provider is the same as mine, but the only way I could get connected with a hard link.

  So far, the only thing I did is to see if I could connect to free wireless (municipal library) and was unsuccessful. I think the problem is with my settings, but am not sure. I have to be careful to change anything because I can't afford to lose my connection at home because my job depends on it.

  Any suggestions?

  Thanks for any advice you might be able to share.

  Hi, Pat:

  I am very confident that if you download and install the driver from the link below, your problem will be solved.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-99392-1 & mode = 3

  Paul

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Unable to connect to a wireless network - "the network card know driver or hardware related issues.

  Can someone help with the following problem please?

  I'm unable to connect to the wireless network.

  I have an Acer Aspire 5315 with an Atheros AR5007EG wireless adapter. This shows that "working properly" in the Device Manager. I tried to re - install the drivers for it constantly. They seem to everyone install ok but I still have the problem.

  The symptoms are...

  (1) if I try to set up a wireless connection, I get "unexpected error occurred". There is no useful looking for messages in the event viewer.

  (2) if I use "Diagnose and repair" I get "knows the network adapter driver or hardware related issues.

  I uninstalled everything which I think could be the cause of conflicts. I scanned for malware. I have run chkdsk and sfc. I have all the updates from Windows Update. I tried in Safe Mode with networking, but still get the same results.

  OS is Vista Home Basic 32-bit SP2.

  I would be grateful for any advice that might help solve this please.

  I have now re-installed Windows and everything works fine.  I still have no idea what caused the problem, or if it could have been set without a re - install.

  Thanks for the replies.

• I'm unable to connect to the wireless network.

  replaced the card wireless and cant get driver for reinstall.

  Original title: replaced the card wireless and cant get driver for reinstall.  Help?

  Hello

  Please contact the Microsoft Community.

  You can't connect to the Internet.

  Please answer the question-

  (1) you are able to connect through the LAN cable?

  (2) what is the brand and model of the computer?

  (3) are you referring to the light on the computer or the router wireless?

  Method-

  I would have you look at the article-

  The problems of Internet connection

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-Internet-connection-problems

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Do get back to us and let us know if you need more assistance. We will be happy to help you.
   
  Thank you.

• I'm unable to connect a Canon wireless printer to my Time Capsule / Airport utility

  Looking for advice on how to connect to a Canon wireless printer to my wireless (Time Capsule).  Airport utility does not see an option to add a WiFi printer.

  If you are referring to the method of adding a printer WPS...

  Open AirPort Utility

  Click on the image of the time Capsule

  Click the Edit button in the window that appears

  Click on the menu of The Base Station ... up where you see the icon Apple, file, window, help and other menus at the top of the computer screen top

  Click Add a WPS printer

  

  There are two methods available... . First of all try (which is identical to a button press the Time Capsule) and PIN, using a code. Choosing the right method according to the instructions provided in the installation Guide for your printer.

• F4580, printer: unable to connect F4580 to wireless network after the upgrade of Virgin Media nowhub

  My printer HP F4580 was connected to my network without wire from Virgin Media Superhub. Then I upgraded to the latest Supehub2 of VM (150 MB/s) but the printer does not now connect. We have 2 Macbooks that connect ok for the SSID of 5 Ghz and a cell phone that connects ok for the SSID of 2.4 Ghz. The printer is WPS enabled and therefore the network. I tried to add the printer to the network using the two WPS push and entering the PIN for Client in the VM Supehub Wireless Manager, but neither work. When I get the F4580 to print the wireless network test report prints a WPS PIN and details for the VM in 2.4 GHz network (auth WPS - PSK, AES/TKIP encryption) sees it. The report includes the SSID for my previous network in the configuration summary. I don't seem to have another way to connect elsewhere WPS push or PIN customer WPS.

  In Manager machine virtual Supehub mode wireless 2.4 GHz network is defined as up to 144 Mbs, but it makes no difference if I put it up to 54 Mbit / s. The Security Mode is set to Auto WP, it makes no difference if I put it to WPA2-PSK (AES).  WPS is activated, and push the WPS button on the Supehub flashes when I use WP Push or enter the PIN code of the customer. In both cases, the I pressed the F4580 wireless button so that the indicator wirelss light flashes then than the VM, push the button flashes. Can anyone help?

  I solved the problem of (re-) install the printer on a Windows PC on the same network, using the CD for the printer. The installation allowed me to select the network, and set up the printer for wireless use.

• HP Pavilion g series: unable to connect to the wireless epson printer

  I tried to reload the printing software on both cd and download from the epson site. Unfortunately, when happens to wireless setup, it fails to connect, and indicates that it has not installed software. I have connected to this printer before and my other laptop works very well. I just had to wipe the hard drive on the HP and am now in the process of re - install all software. Appreciate it is perhaps an epson problem and not a problem of HP

  @bbj1,

  Hello and thanks for the display on the HP support forums.  If the laptop you can connect to your wireless network, then it is not your laptop.  If not please post back with the full model and product number.

  Computers how can laptops HP - I find my model number or product number?

  If you can connect to your network wireless with your laptop then please contact Epson for supported by your printer.

  Thanks again for posting and have a great day.

• OfficeJet pro 8620: HP 8620 won't print via wireless for nay on my home mac

  I have 2 Macs in my home, Macbook, and Macbook Pro running Yosemite. I tried to implement a pro 7310 office via an ethernet cable printer to print wireless from these two macs and after 3 frustrating months trying everything that I could find, I bought the 8620 thought that would solve everything.

  Instead, it's the same. I am trying to print from firefox or word or anything and it cannot find the printer. But if I turned off everything, including the Mac and the router (N of Belkin N300 router wirleless) and the computer and then turn them back on, the printer is detectable and prints well. It just seems to disappear and I can't find it when searching for available printers after a few hours. I installed the last softeare for this printer and it worked when fine forst, implemented.

  Any help would be greatly appreciated that I spent way too many hours trying to figure this, it doesn't help that I'm not that tech savy.

  Thank you!

  Hello @bokke ,

  Welcome to the HP forum.

  I understand that you are having problems of communication between your two Macs and your 8620.

  I would like to help.

  Three things have caught my attention.

  You said that this is happening to both computers.

  You also mentioned that the same thing happened to another model of printer.

  Finally, after you power cycle your network everything works. At least for a little while.

  I feel that we should seek less software and more to your network.

  Belkin N300 wireless N Router, how old is this router?

  How is the printer to the router?

  Your router should have the following configuration

  ~ The multicast must be on or enabled (allows connectivity Hello)

  ~ Wireless Ports, they can also be frozen in security software:

  The incoming (UDP) ports: 137, 138, 161, 427

  Outgoing (TCP) ports: 137, 139, 427, 9100, 9220, 9500

  ~ Our printers support only the 2.4 GHz not 5 GHz

  ~ Recommended that the network name and password DO NOT containing and spaces/punctuation or special characters ~ Dual Radio enabled (for b/g wireless & networks n)

  ~ Mac disabled filtering

  ~ The built-in firewall must be the default or the lower settings

  This should solve the problem.

  PORTS TO UNLOCK.

  UDP: 137, 138, 161, 427, 80 & 443

  TCP: 137, 139, 427, 9100, 9220, 9500, 5222 5223

  So please make sure that multicast & Hello are enabled. Also never hurts to check for an update of the firmware.

• OfficeJet Pro 8600: Unable to connect printer OfficeJet after update Win10

  I had my Officejet pro 8600 perfectly connected wireless to Win 7 for several years.

  After the update to Win10, I am unable to connect to the printer. The printer status shows that driver is not available.

  I checked Win10 and Adobe by other suggestions from the forum. both are up to date with the latest version.

  I uninstalled and reinstalled the printer Win10 driver and the download driver HP. None succeeded.

  Run the convenience store Win10 shows that the print spooler cannot be started. He is set to start automatically, but is currently stopped. I can not start it manually, and it does not start after a reboot.

  The fixed! I found the following information on a page of the Microsoft Help forum:

  Thanks to http://www.registryrecycler.com/blog/2013/12/how-to-fix-printing-error-in-windows-8-1/ for the fix.

  Apparently, the Windows 8.1 updates had the same problem.

  Editing the registry is necessary. Make sure that you have a backup of the registry before making changes.

  • Press the keys Windows + R on your keyboard to open the run box.
  • Type regedit in the box run and press Enter to open the registry editor.
  • Confirm the UAC message by clicking on the Yes button.
  • In the left pane of the registry editor, expand HKEY_LOCAL_MACHINE to find the key below.
  • SYSTEM\CurrentControlSet\Services\Spooler.
  • While the spooler key is highlighted, you can navigate the right pane to assign the value DependOnService.
  • Double-click the string value to change the data.
  • The data in the value field should contain the text saying RPCSS, followed by http in the next line.
  • Select and delete the letters http and click OK to save your changes.
  • Leave the part of RPCSS to the value data as it is written.
  • Close Registry of Windows and restart your computer.

• Satellite C660-1NJ - unable to connect to the wireless network

  Hi guys

  I got a 1nj c660 and I have a wireless connection to a Fritzbox 7170.

  Now, this morning, everything was fine and I connected wonderfully, but now I can't connect no settings have been changed I just stop and start as usual. I used configfree and it shows the network but if I try to connect it says unable to connect to the network. I have Win7 home basic OS.

  I uninstalled the wireless network card and reinstalled, updated the drivers but nothing works, I still get the same error.

  Can someone help will appreciate it greatly!

  Hello

  Are you able to connect to open WLan?
  I mean you can try to disable security options in your Fritzbox and might test whether you are able to connect without the WEP, WPA or other safety standards.
  Of course, you should only done for testing purposes

  If this box works, then it means that the security of your router settings were not consistent with the settings of the Wlan card.

• Unable to connect to my wireless network

  I recently discovered that my wifi for vista would not connect to the internet even if the signal is 100% solid.

  My wireless House has a WEP encryption and it has already been saved on the laptop but since yesterday it ask me the WEP key when I try to connect it and wouldn't connect even if only the WEP pass has been entered correctly. The message that usually appears at the end is "windows is unable to connect, try the other network", even when I tried my companion's unsecured network.

  Here's what I did so far, but without success...

  I checked the Wireless driver from Device Manager and it works properly. I even try to update the driver and received a message that the driver is 2-update.

  Here's what I got when I tried to use "ipconfig/all".
  ..................................................
  Windows IP configuration

  Name of the host...: AZOU
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek RTL8187B Wireless 802. 11b / g 54Mbp
  s USB 2.0 network adapter
  Physical address.... : 00-22-5F-36-AE-19
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : Belkin
  Description...: Realtek RTL8102E Family PCI - E Fast Ethern
  and NIC (NDIS 6.0)
  Physical address.... : 00-1E-33-7A-3C-AE
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::1ad:202c:5412:8070% 10 (Preferred)
  IPv4 address...: 192.168.2.35 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: May 2, 2009 19:58:15
  End of the lease...: June 9, 2145 03:09:10
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DNS servers...: 192.168.2.1.
  194.168.4.100
  194.168.8.100
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  ... Description: isatap. Belkin
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  I can use the Ethernet cable to connect and this is killing me lol seriously... can anyone pls help me, I want to get this working wireless!

  Thank you

  Hello!

  What computer Toshiba laptop and OS do you have?

  In your case, I would check the Web from Toshiba site for an update of the BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you tried to reset the router? Unplug the AC adapter from the router, wait 5 or 10 minutes and then try again.
  Another laptop works on the router?

  Good bye

• HP Pavilion 15 laptop: Solved: unable to connect to my wireless network

  I have problems connecting to my wireless network. In available connections, my network is there with an x next to it. I can click on it and put my security key in, but it says unable to connect to the network. I've updated ready network cards. Any help would be greatly appreciated.

  Bobby

  Thank you for all your help. I'm back on now. I started having trouble a few weeks ago. My wifi connection would pass, and I have to disable and then re activate my network card back. This has been relatively shortly after my upgrade from Windows 10 but not immediately after. Then the other day which didn't work and I could not connect at all. I read somewhere to try to uninstall the network adapter and then restarting. It did not work. I also read to find updates for the network card and install those which, as mentioned by ichi730 as well. This no longer works. Then, I realized that I had not tried to restart the router after reading the post of WyreNut. It worked, thank you! I feel that it is a combination of the two pieces of advice that have worked so.

  Thank you all for your comments, it's much appreciated.

  Bobby

• Unable to connect to a wireless network

  I am able to connect to my workplace wireless, but not at my sisters House. The router is linksys and my f700 compaq wireless card is atheros. Network is detected and we know the wpa key. When I try to connect it says unable to connect to this network... Please help... Thank you...

  The situation you are in seems that this problem is only between lynksis router and laptop.

  Try changing from 6 to 11 wireless channel.

  Try to also replace wireless abg to bg or g only mode.

  All these changes can be made through the router so call him lynksis.

• HP ENVY 4520: Unable to connect to the wireless network

  My new printer is not connecting to my wireless network.  My router, it sees and accepts its letters of nobility, but then the printer is connected.  It will be displayed on my network for a second or two, but never stays there.

  I printed the "RESULTS of the WIRELESS NETWORK TEST" and he tells me that "the MAC address filtering can be activated on your wireless router that can prevent your HP printer to connect to your network without wire during installation.  MAC address filtering is disabled.

  I have connected many other features to my wireless network by pressing the WPS button and it begins to appear, but does not stick.  I also tried to manually enter the password without success (and the WPA key).

  Try to set up the printer with a static IP address that is not your router DHCP scope.