7280 software HP will not install on my HP Pavilion dv7
I had to get a new hard drive for my pavilion DV 7. I can get windows to install the base driver. Cannot install the full software from HP. Followed all the instructions, including error Installation HP fix for Windows &. I have Windows 7 Professional 64 Bit.
When I try to install the full version I get the error next message (see photo) and printer and driver is deleted from my computer and I reinstall Windows base driver. The printer works with other computers on the wireless network.
Help please.
Hi JPWNS,
Windows 7 and Windows Vista allows you to have multiple users share the same computer under their own individual accounts. This allows each user to have their own location on the computer where they can store their personal documents, photos, videos, saved games and other personal data. It also allows the owner of the computer assign some accounts the ability to perform administrative tasks such as installing software, while limiting the capabilities of the other user.
This tutorial will guide you in creating a new account in Windows 7 and Windows Vista.
- Click the Start button. It's the small round button () in the lower left corner of your screen that has a Windows flag on it.
- Click on the Control Panel menu option.
- When Control Panel opens, you will see a screen similar to Figure 1 below.
Figure 1. Windows 7 Control Panel
Tags: HP Printers
Similar Questions
-
Software CyberLink will not install on Win 8
H8 1380 t CTO, Intel i7 3820 processor. 16 GB of DDR3 Ram PC3-12800 memory. FRIEND bios (UEFI), Version 2.14.1219 (current).
Pegatron Motherboard-IPIWB-PB (Pittsburg) Audio Beats. AMD, Radeon HD 7570-1 GB graphics card.Hello
Installed Win 8 (own) on a second partition, (dual-boot factory Win 7 and Win 8 on the second partition). Installed all the software and drivers from HP for this system without any problems except for the elements of Cyberlink,"error 1603" code.
Any suggestions on why Cyberlink programs will not install?
Thank you
Hello
Check the compatibility of your products from Cyberlink here.
The HP position maintenance for Cyberlink is only an update.
If you have installed under W7 from Cyberlink, then try the "check compatibility" button to see if improvements are required. So just try to install Cyberlink under W8 then click on the products tab Compatibile.
BTW, nice PC.
-
The printer is visible on the page computer & devices & also in the router configuration page, however during installation becomes 2/3 of the way through it asks you to choose the printer that you want to install and the printer is there and you click on it, then he asks how you want to install, wireless or directly connect with a cable to the router and you have chosen the cable the following page opens and a progress bar appears and it stops and says it can not a printer, then he ends by installing... its frusting because it leaves no driver in Device Manager and all other software it installs, does'nt work... Tried different configurations to install 7 times... No good must always uninstall it... You can buy a cd of HP for $10, but the version of the software on the cd was released in 2007. the 2009 version which you can download just will not work... Any suggestions... Please direct any replies on the forum, or personally to * address email is removed from the privacy * ... Thank you
Bob Starke
PS-4months have passed and several updates KB - took the risk and installed downloadede IE9, then ran an SFC... Still corrupt system files... Uninstalled it & presto - no file corrupted... Now the case #1165316803... have not yet heard back... Ho-hum...
Hello
- Have you tried to connect your printer manually (not through the router, but via a USB connection)?
The problem is related to the HP software. Then I suggest that you contact HP support for assistance.
-
The Apple software update will not install updates
Each time the Apple software application to be updated by Apple Software Update, the error in the picture below opens and I get it over with to have to do a manual reinstall. Here, the image shows the most recent upgrade to iCloud and iTunes, but I also got QuickTime are doing the same thing. It would seem that each manual installation to reinstall a new copy of the GSS, but he keeps having the same problems. Please help diagnose this problem. The "Download only" option in the window pop up works, but it would be nice for ASU than him.
An update of the software is pretty useless if it is not updated of software.
I suspect that all is not well with your copy of the GSS. You can try to fix it, but I suspect a complete tear down and reinstallation of any software Apple will be needed.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
Office software Blackberry will not install on windows 7 64 bit.
I tried to download the blackberry desktop software, but does not run the programe because windows said it sews damage my system. I checked the site of bb, and they said for 64-bit windows xp that I must first install kb/968730. What should I do? my system is windows 7 Home premium?
Hello
What is the full error message?
You can follow the methods mentioned below:Method 1: Install the program in high mode.
(a) right click on the Setup file
(b) click on run as administrator.Method 2: Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_UninstallMethod 3:
Install the software to the clean boot and see if that helps.
Clean boot: here is the link:
http://support.Microsoft.com/kb/929135Note: When you're done to diagnose, follow step 7 in the article to start on normal startup. -
I got the HP Client Security software installed and running under microsoft Windows 10. It will install is no longer under Windows Version 1511 10.
- Or nearby - 17 November Microsoft has released an update to Windows 10 Version 1511.
The Windows Update process necessary to uninstall the security software for the HP customer as it has been marked as incompatible.Before you uninstall, I've upgraded to version VERSION: 8.3.16.2035 (SP72998.exe). The installation under this version of Windows 10 properly filled.
I have re-directed the Windows Update process and it beating Pavilion HP Client Security Software as incompatible and need it be uninstalled before the update of Windows 10 Version 1511.
I uninstalled the HP Client Security software, upgrade to Windows 10 Version 1511. When reinstalling SP72998.exe, after you open a powershell window, the installation fails with the message "error 1722" There is a problem with this Windows Installer Package... Action PinShortcut.9EA0... "Location: c:\users\"username removed"\AppData\local\...\DPClientCOnsole.exe.
A quick capture of window powershell before she disappears reveals a similar error: 'verb Pin to taskbar not found. "
It seems that something in the Setup program tries to pin to the taskbar is a failure. A quick google search seems to indicate that the interface script to pin has been removed in Windows 10.
I tried to install the update with Windows 8 compatibility, run as administrator, clean boot Windows. The same error each time.
An installer updated that works with Windows 10 Version 1511 or a workaround would be greatly appreciated so I can regain the use of software security tools for the HP customer as a login by fingerprint reader.
Workaround in this post worked perfectly with Windows Version 1511 10 and HP Client Security Software VERSION: 8.3.16.2035 (SP72998.exe).
-
HP 7780 Pro will not install the new HP Pavilion
I tried to implement all install a HP 7780 Pro on my new pavilion that extends from Vista Home Premium. Support download page / has a file of 64-bit Vista on it, but I can't seem to download. Talking with a technician online this morning, but that didn't get me anywhere. Asked to have the file sent to me, but has been totally ignored.
Anyone have an idea how I can fix my problem.
There may be a problem with your browser settings or firewalls that block FTP downloads. You could try to download using a http link, click here for basic driver or here for the recommended driver. There are also some updates that should be applied when the driver is installed.
At the FTP address issue see the following page.
Kind regards
Bob Headrick, Microsoft MVP printing and imaging -
my dvd burner will not write to disc HP Pavilion dv7
I had a problem with my burner... I can play my games or movies about it, but when I try to burn a movie it fails to halfway through to complete... I never had this problem before and did all the troubleshooting it said and said that the device works properly... Also went to the site of mrfixit and he does not either... Please can someone help me?
Hello
Check with HP, their drivers support and documentation online and ask questions in the forums on
known problems.HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/More troubleshooting below:
============================================================
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Used speed, the actual brand of discs, burning and if file Live or mastered all come into
play. A cleaning disc can sometimes help.Burning a CD
http://Windows.Microsoft.com/en-us/Windows7/help/videos/burn-a-CDDisc burning: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questionsDisc burning tips
http://Windows.Microsoft.com/en-us/Windows7/disc-burning-tips-for-Windows-7Should which CD or DVD format I use?
http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-useFormat a CD or DVD
http://Windows.Microsoft.com/en-us/Windows7/format-a-CD-or-DVDBurn a CD or DVD in Windows Explorer
http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-ExplorerBurn a CD or DVD in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-PlayerBurn a CD or DVD in Windows Media Player: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questionsChange settings for burning a CD or DVD in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-PlayerBurn a CD or DVD in Windows Media Center
http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-CenterBurn a DVD-video using Windows DVD Maker disc
http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-MakerHow to burn DVDs with Windows DVD Maker
http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-MakerClose or finalize a CD or DVD
http://Windows.Microsoft.com/en-us/Windows7/close-or-finalize-a-CD-or-DVD----------------------------------
Excellent Forum for help with programs and CD/DVD problems
http://Club.myce.com/==========================================================
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
My HP Pavilion dv7-4287 is a year or so he's old, maybe that's why play today s Blu - ray disc?
I tried to download HP ware closed, but without success.
Did you try a disc cleaner for computer optical drive? There may be dust on the laser...
-
HP Photosmart C4780 all-in-One: Photosmart C4780 will not install on laptop dv7 Pavilin
My C4780 will not install on my computer laptop dv7. I downloaded the current software on the HP site and tried to use the disc that came with the printer. In both cases, that the installation program begins to run, goes through four steps and when it is installing updates, it disappears from the screen. I do not understand that because it has been installed and operating at once through my wireless network and still work on my desk. I totally uninstalled all the software before you try to reinstall. I even checked to ensure that the appropriate records were in place after not install for the first time. I went through this about six or eight times, try different things each time. I also disabled my antivirus (Panda Cloud AV) and that made no difference. At this point, I'm out of ideas and really need help. I also read some relevant posts in this forum without good results. I need help in the worst way! Thanks in advance for any help.
Sorry it took so long to get back but things have been hectic. I really believe that my problem was one or more files that are damaged somewhere, so I took the easy way and installed Windows 10. After that I installed the printer and everything is fine now. But I really appreciate your help.
-
OfficeJet 7310: Officejet 7300 series software will not install on new pc Win 7
My Officejet 7310 networked HP software will not install on my new Dell Precision Tower 3620 running Windows 7 64 bit.
Downloaded file is: AIO_CDB_Net_Full_Win_WW_130_141.exe
* When you run the Setup program, two errors that have occurred having to do with the system who don't not USB capacity or equipment. (There are about 8 USB ports that work, some USB 3.0, any other USB 2.0).
* Try with disabled firewall doesn't change anything.
* If I'm running the original printer installation disc, it downloads the new software and I find myself in the same dead end.
Sitting next to this machine is my (dying) old workstation Dell Precision 390 with Win 7 and operate the HP and related applications very well Solution Center with the same network printer. (The two machines work protection antivirus Malwarebytes'.)
It sounds crazy! Any suggestions on how to fix would be greatly appreciated.
Hello
Run the Setup program and comlpete extrction process.
Once the installation dialog box appears to put an end to this window.
In Windows Explorer, press and type % temp % fall.
Locate the most recent installation folder, which begins with 7z (e.g. 7z1234s)
Open the installation folder.
Rename the file named usbready.exe in usbready1.exe
Back a levell and run the Setup.exe file.
Now follow the installation and check for the difference.
Please let me know the results,
Shlomi
-
4200 software all-in-one printer will not install in Windows 7
I have a 4280 printer all in one that works very well with Vista 32 bit OS. I really like the interface of HP. I had a Dell with Windows 7 Professional 64 bit desktop computer. I was able to load without any problems except the printer.
I downloaded the latest software of HP 64 bits for the device 4280. Installation takes place upwards the agreement "accept" screen and when I check the box to accept (name and c drive location, features to install, etc.) and then press the "continue" button disappears from the HP installation window. There is no reported errors or system events that I can find.
I tried all the suggestions on the site of HP for Windows 7 with no luck. I found Windows 7 install a driver immediately once you plug the USB connection. Tried a new printer / I drive with no luck. I tried Windows 7 32 bit with identical behavior that disappears. I tried safe mode and diagnostic mode in case something was interfering... same result. At least antivirus and firewall have been disabled and nothing else worked. I even ordered a CD from HP with the same result as the downloaded program. CHKDSK and scannow will find no problem with Windows.
I can run the printer and the scanner with windows drivers, but the interface, especially for the scanner is not functional enough. I get kind of work in a virtual XP environment, but it is very slow and a little less functional loading... vista vs XP I guess. In short not a viable solution. I could buy a new all-in-one, but I'm worried it will not install and this can become costly experimentation, not to mention my stock of the 4280 cartridge.
I would really like to find a way to get the HP software to install. Someone has an idea?
Hello again Tom5223,
I see that we still have problems installing the printer on your computer.
I suggest to call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.
A representative of HP has the ability to use more advanced troubleshooting steps and will be better equipped handle a problem like this.
Thank you for your time.
-
I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?
Hi Marleneb3511919,
I'm sorry for the inconvenience caused to you.
I guess you tried rebooting your system? If so, and the problem persists please try the steps listed in this document https://discussions.apple.com/thread/240851?start=0&tstart=0
Please let us know if this goes through.
Kind regards
Aurélie hamadi
-
computer laptop 15-fo39wm: updates will not install
I have updates that will download, but will not install
Hi @help987 ,
Welcome to the HP Forums!
It's a great place to find answers and suggestions!
You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more
I understand that you encounter a problem installing your Windows updates.
Please try these steps.
Method 1:
I would suggest to run Windows Update to convenience store and check if it helps.
(a) press the Windows Key + W key on the keyboard.
(b) resolution of the problems of type in the search box, and then press ENTER.
(c) select Troubleshooting. Click on show all the and select Windows Update and follow the on-screen instructions.Method 2:
I suggest perform you a boot in minimum mode and disable the security software and check if you are able to install windows update manually.
Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.
(a) press Windows + R Type msconfig in the search box and then press or click on msconfig.
(b) the Services of the System Configuration dialog tab, tap or click to select the hide all Microsoft services check box, and then press or click disable all.
(c) on the start-up of the System Configuration dialog tab, tap or click Open the Task Manager.
(d) the tab to Start in the Manager of tasks, for each startup item, select the item, and then click disable.
(e) close the Task Manager.
(f) on the start-up of the System Configuration dialog tab, press or click OK, and then restart the computer.
Note: once you have finished troubleshooting, follow the steps in "How to reset the computer to start as usual after a repair by clean boot " to reset the computer as usual.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Download and install the update manually and check if it helps.
Follow the steps to install the update manually:
a. go to the Microsoft Download Center page
b. type the number in the search box and press ENTER.
c. download and install the update and check if it helps.
You can see the steps in the following Microsoft article.
Problems with installing updates
Good luck!
-
HP Deskjet 1056: HP Deskjet x 64 will not install on Windows Vista
HP Deskjet 1056 will not install on Windows Vista
Hello
Remove the complete software for printer. Download the latest drivers and software from link below and installation of ty.
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=372330&
Maybe you are looking for
-
Also, the letters turn into blocks. The only way to sum it up, is that it's broken. Period. And nothing helped.
-
Do not receive calls fixed.
A subscription to call mobile/fixed. I can call, but ask my number GET a busy siginal. Need help to solve this problem.
-
where can I find the download for old-fashioned mode of solitaire for windows 7 os
-
RDS (FM) function and move fm stations back?
Hi, a Member asked here if Sansa clip will function RDS, Miikerman seem to answer Yes, but don't know if he has answered this question or another man asked to be clear is our small fantastic Monster Sansa Clip + will have RDS works on an update of fi
-
A line on fire 2 blocks cyan and green pattern. (4 times 'cleaned') Message is: I need to replace the printhead magenta/cyan AND black/yellow print head?