8.0.1 - XP Guest "There is at least one"

Similar Questions

• I want to burn files to a cd, there are two files, one is 8.1 GB and the other is 3.5 GB, what capacity of CD should I buy to take account of these files, or is there any method I can use?

  I want to burn files to a cd, there are two files, one is 8.1 GB and the other is 3.5 GB, what capacity of CD should I buy to take account of these files, or is there any method I can use?

  First of all, you cannot use a CD for each file - they do not provide enough space (and I'm pretty sure same compression help not enough).

  You can burn the 3.5 GB on DVD or DVD-R DVD - RW file, as long as it's a guy with enough space http://en.wikipedia.org/wiki/DVD.

  8.1 GB file CAN be turned into a DVD, but you need a very special type (and maybe special software - I'm not sure about this).  An article on the different types of DVDs and their abilities of here: http://en.wikipedia.org/wiki/DVD.

  There are a few 3rd party software products that allow you to split a large file inot several pieces to fit on a game sequenced CD, but I couldn't find one that was free.  To do this, you can check on www.download.com, www.tucows.com, Bing, and Google.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can we know if there are two or one router processor (RP) in ASR1006?

  How can we know if there are two or one router processor (RP) in ASR1006? Is the RP located in ASR1K inside or it's like a map? Thank you

  'show the inventory' or 'display the platform '.

  The RP is "embedded" / "shipped" in ASR1001/1002 and 1004, 6, 9, 13 card.

• There is more than one active network connection on your computer

  I have two ISP with 2 different IP addresses of course. With one I connect via cable, the other is wireless. Until a couple of days, I'd keep the Wi - Fi turned off on the front of the case, to allow the laptop to connect only to the cable connection.
  Some sites were not loading, indicating problems with DNS resolution. I checked for possible reasons online. I tried to connect to these sites using a webproxy and it worked, so I thought I would try the wireless connection. I turned on and sites would be load normally. However, when I checked my ISP number this shows that the active connection cable one.
  I hesitated to leave the switch turned on, but in order to leave these sites load, I thought I had no other choice. Needless to say that I am not notified at all or with the networks or computers.
  Everything seemed to work fine until the wireless connection has started having problems anyway, it stopped working (ISP issues), so stopped at new loading sites. I tried troubleshooting it and he said: "it has more than one active network connection on your computer" and suggested I would disconnect them. Naturally, I unplugged the wireless connection. Problems: I can not load the sites that seem to need to have wireless to turn on. Note that it does not need it to be active, only to have this switch.
  Please let me know if there is anything I can do to correct this inability to connect to the servers of some sites without the need to have that switch on. If there is no explanation for this behavior, which does not make sense. Again, I know nothing about networks or computers, forgive my ignorance!
  I use Windows 7 Home Premium x 64, my laptop is a Vaio. This happens on all my browsers and sites that have stopped loading were load normally when I 1st turned on the laptop the same day. To later that day there some sites stopped to load, which made me think it was a matter of site. Then I realized that it was not connect to twitter, which was not down, so I realized it was my problem.

  It looks at when you use the wired connection THAT DNS has failed.

  In order to clarify the names of web sites means absolutely nothing to a computer in itself, www.google.com is completely useless. All comms on a network revolves around the IP addresses and the DNS service is a process by which the dedicated servers which addresses are known can tell your PC what is the address of a Web site. For some reason any on the wired connection your PC isn't getting the address to soundcloud.com.

  In family situations more of a PC it gets the IP of the router settings, of course I don't know if this is true in your case. If you open a command prompt and run ipconfig/all, paste the result here and we can check. This would include which server DNS to use that, as I said is normally the router. There are actually millions of internet addresses, and your router could not store them to remedy this it forwards a request for an address of DNS servers listed in its own configuration of IP internet side.

  If you can connect to the router and look its DSL or WAN configuration, you should find at least one or two DNS servers. Take note of them. If you can't connect to the router then look at the website from your ISP for their parameters.

  On your computer, go to the network control and Internet\Network connections, right-click on your wired card, and select Properties. Double-click Internet version 4 Protocol. In normal use get it 2... buttons should be selected, are they?

  If you change only the down one to use the following DNS server address and enter the fields, addresses that you got the router. Click OK twice, but leave the window network connections open as you need.

  Now, try to get your site into a problem. If you can then the problem is with your router. Instead of asking the router address you have bypassed this stage and went on the server, your router is configured to use.

  If you are still unable to the site then the problem is further down and your router may be OK. Then go back to where you set the addresses DNS and replace those that you got the router and turnkey 8.8.8.8 primary DNS server address and 8.8.4.4 in another address, OK once again two times and then try again the site. These 2 addresses are own Google public DNS servers and should work.

  If the ISP provided the router they should replace it. Explain what is the problem and the results of these tests, although I have no doubt that they insist on their own checks before accepting.

• Error message is "There is more than one active network connection on your computer"

  Original title: barely internet connection

  Sometimes I can get on the internet, but most of the time not.  After some troubleshooting I get a message read 'your computer seems to be configured but correctily the device or resource (www.microsoft.com) does not' after continuing to shoot badly today I received this message: "there is more than one active network connection on your computer.  If any of these connections are not configured properly you may not be able to access the Web site, device or resource (isearch abg.com) and the following message: "There is more than one active network connection on your computer" I don't know what to do with this information.

  Hello

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks that you are having problems with the Internet connection.

  Perform the steps mentioned below and cehck.

  a: Go in Control Panel > network.

  b: Then click on network and sharing Center

  c: Then click on the change adapter settings on the left hand side
  d: Right-click on the network connection , and then select Properties.

  e : select Internet protocol version 4 (TCP/IPv4)
  f: Click on the Properties button
  g: click the advance button
  h: uncheck the option which reads 'use the gateway on the remote network' in the ip settings tab.

  Meet us if you encounter any problems with the network connection or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• XML with XSD validation when there is more than one XSD.

  Hello

  I need to validate an XML against a set of xsd.

  I am aware that, when there is a single XSD to compare, it is possible to compare using xmlDoc.schemaValidate () with xmlDoc and xmlSchema.

  But in my case, there is more than one XSD against which I need to compare the XML code.

  My main XSD has the statement as mentioned below.

  " < xs: import namespace = ' http://www.w3.org/1999/xxxx "schemaLocation ="xxxx.xsd"/ > "

  " < xs: import namespace = ' http://www.w3.org/1999/02/yyyy "schemaLocation ="yyyy.xsd"/ > "

  I don't know how to handle this situation.

  Please, help me!

  Thank you

  Vicky

  Hi Vicky,

  This situation is not different, just validate the main schema.

  But, to use the XMLType schemaValidate method, you must save the schema in the database (via the DBMS_XMLSCHEMA API).

  If the main schema contains imports then these referenced schemas must be saved too.

  To sum up: register all 3 patterns in their order of dependency, then you will be able to validate your XML with the main XSD code.

  () dbms_xmlschema.registerSchema

  schemaURL-online , for example 'xxxx.xsd'

  schemaDoc =>

  local-online true

  genTypes-online fake

  genTables-online fake

  enableHierarchy-online dbms_xmlschema. ENABLE_HIERARCHY_NONE

  ) ;

• Hawthorn of pixels there are resolutione and one foto photo? Where?

  Hawthorn of pixels there are resolutione and one foto photo? Where?

  If you click a picture, it will take you to the image details page which has the most information.

• can someone let me know how to print a scanned document. In printing only the 1st page prints fine as I know that there is more than one document.

  can someone let me know how to print a scanned document. In printing only the 1st page prints fine as I know that there is more than one document.  This is the version Adobe photoshop cc 2014.  Someone said it you use printing quick button but who can't find anywhere.

  Carolyn

  Carolyn,

  I don't know if Photoshop is the best solution for the printing of DOCUMENTS scanned.  Photoshop opens a page of a DOCUMENT at a time, let's say you have a MultiPage PDF Document, when you open with the PS, tell him what page you want to open. Once you do, it will convert this page into basically a picture, a raster file that can be edited like a photo.  So if you go to print, it prints only one page, you have open...  So, if you have opened the first page of your document and go to print it, which explains why it only prints the first page.

  So is what file type of the document that you are trying to print?  If it's a PDF file, I opened it with Acrobat/Reader, depending on whether you have and that FILE you > PRINT it like that.   Or is there a particular reason (Lighten/Darken/increase contrast etc...) you are needing to go first to Photoshop?

  Give me a little more information on exactly what you're trying to do and I'll do my best to provide a workflow easier to achieve your final goal.

  I hope this helps.

• I bought the Photoshop 19.99 plan for a month so that I can check the new Illustrator and other new programs CC and see if I liked the concept... Now that I checked out, I decided to upgrade to the full cloud...  There is a prom one year

  I bought the Photoshop 19.99 plan for a month so that I can check the new Illustrator and other new programs CC and see if I liked the concept... Now that I checked out, I decided to upgrade to the full cloud...  There is a promotion for one year to 29.99 per month for users of cs3, but when I try to upgrade my contract he wants to load the full 49.99... is there someone I can call?

  Hello Mary,.

  There is a telephone support | Orders, returns and exchanges, you can use > http://helpx.adobe.com/x-productkb/global/phone-support-orders.html.

  If necessary and for further questions click on http://helpx.adobe.com/contact.html and 'open' Please use the cat, I for my part had the best experiences. I quote Adobe Preran employee: the chat button is enabled as soon as there is an available agent to help.

  Hans-Günter

• ArrayCollection collection only works when there is more than one element.

  Flex 4.6.   XML is generated by php.

  < imgtex >

  < image >

  < pic_no >

  < / pic_no >

  < pic >

  < / pic >

  < tex >

  < / tex >

  < / image >

  < / imgtex >

  When the XML has several lines (pic_no, pic, tex); For example:

  < pic_no > 01 < / pic_no >

  < pic > some.jpg < / pic >

  < tex > text < / tex >

  < pic_no > 02 < / pic_no >

  < pic > some2.jpg < / pic >

  < tex > some Text2 < / tex >

  Control dataGrid and Alert.show () fills this info. But if there is that a single row of (pic_no, pic, tex), the DataGrid remains empty and Alert.show () is not yet displayed.

  Is there something still missing from my code? A single item in the collection ArrayCollection should be treated differently? Thank you.

  Import mx.collections.ArrayCollection;

  [Bindable] private var img:ArrayCollection;

  private void getImgResult(event:ResultEvent):void {}

  IMG = event.result.imgtex.image;

  mx.controls.Alert.show ("img =" + img);

  }

  The example above, I think it would be clearer to do this in your result handler:

  var resultAC:ArrayCollection;

  if (event.result.rows.row is ArrayCollection) {
   resultAC= event.result as ArrayCollection;
}else{
   resultAC= new ArrayCollection(ArrayUtil.toArray(event.result));
}

• A function can receive from a keyboard event or a mouse event or there may be only one?

  I decided to add some keyboard functions to my program.  All my functions, I wrote require a mouse event to pass to them.  I wonder if there is a better way to perform these functions of mouse event rather than take the contents of these functions and create a function that is called in a mouse event function OR a function of keyboard events.

  What I mean is that I begin to change the functions of mouse event that I don't have only one line inside of them, which runs a separate function. This same separate function that I run using a keyboard to input as well.  It seems a little redundant to me. Any thoughts?  Thank you.

  In addition to other comments, since MouseEvent and KeyboardEvent extends event, you can type argument as event:

  function myHandler(e:Event):void {}

  code

  }

  The only problem with this is that if you write code within the listener based on a specific event parameter - you will need to mount e argument as such in any case.

  Another solution would be to make argument an object. In this case to the compilation and runtime it will be perceived as valid a data type:

  function myHandler(e:Object):void {}

  code

  }

  Typing is no argument at all (like e: *) can cause inconvenience more typing at least to the object.

• Print a web page translate several pages when there should only be one page. How to adapt?

  When I try to print a web page, the result is several partial pages. I tried to adjust the scale, but nothing seems to work. Where can I get this type of adjustment?

  Three possible causes.

  1. the page is intended for managers and each frame is print separately. If you right click on the page you will see a menu item for this framework , if this page contains frames. You'll see on this test page.
  http://www.draac.com/framestest.html

  2. a page wide margin setting. You might be able to see that in Page layout > margins/header and footer page, but some printers are able to get weird settings which do not arise here. When you look at: config these prefs are far
  Print.printer_-printer name_Printer.print_margin_left
  and
  Print.printer_-printer name_Printer.print_margin_right

  3. a non standard paper size is defined in the properties for this printer as seen through Firefox. Could define Custom or picture size.

  This section of the support article a hyperlink by SafeBrowser.
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page

  #2 and 3, do a reset should solve. Do the 'reset as described here:
  
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer
  
  Make sure that you reset all the preferences for this printer.

• I lost my disk of Windows XP Professional, but luckily still have my code. Is there anyway to reorganize one or get a replacement?

  I still have my product key, I didn't lose $ 50 to call them to find out that they can't replace it... Please let me know. I don't like the new OS, I love XP and XP only. I know, stubborn me. Please let me know! Thank you very much.

  Please see: How to replace lost or missing Microsoft software

• Why UNION ALL allows no column names only when a literal is used and there is at least 3 parts of the query?

  An artificial union all:

  SQL> SELECT Dummy FROM Dual ORDER BY Dummy;
  
  D
  -
  X
  
  SQL> SELECT Dummy FROM Dual UNION ALL SELECT Dummy FROM Dual ORDER BY Dummy;
  
  D
  -
  X
  X
  
  SQL> SELECT Dummy FROM Dual UNION ALL SELECT Dummy FROM Dual UNION ALL SELECT Dummy FROM Dual ORDER BY Dummy;
  
  D
  -
  X
  X
  X
  
  
  

  It literally changes it:

  SQL> SELECT NULL A FROM Dual ORDER BY A;
  
  A
  -
  
  
  SQL> SELECT NULL A FROM Dual UNION ALL SELECT NULL FROM Dual ORDER BY A;
  
  A
  -
  
  
  
  SQL> SELECT NULL A FROM Dual UNION ALL SELECT NULL FROM Dual UNION ALL SELECT NULL FROM Dual ORDER BY A;
  SELECT NULL A FROM Dual UNION ALL SELECT NULL FROM Dual UNION ALL SELECT NULL FROM Dual ORDER BY A
                                                                                                   *
  ERROR at line 1:
  ORA-00904: "A": invalid identifier
  
  
  SQL> SELECT NULL A FROM Dual UNION ALL SELECT NULL FROM Dual UNION ALL SELECT NULL FROM Dual ORDER BY 1;
  
  A
  -
  
  
  
  
  

  Why 3 is the magic number?

  My friend, this is what I would call a "bug".

  However, my opinion doesn't matter, because I do not work for Oracle

  You opened a SR with Oracle?

• Why only a single composition plays when there is more than one on a page after you refresh?

  Open Wrapper.html. In it, I have 2 composition (test1 and test2). Both are on autoplay and when I saw everyone on board animate the work very well. It's just when I connect the two compositions in a new document, it gets glitchy. The first charge that both will play, sometimes only plays at halfway. After that updating of the composition that one page plays, the other gets stuck on the first image.

  Dropbox - test.zip

  Is this a bug? How can I do to make the two play normally at the same time?

  Hello

  Files repaired ==> test - 4.zip - box

  You need to clean the panels of your script: the two files.

  

  Then wrapper.html works well.

  A small error with file wrapper: an only div.