Similar Questions

• OfficeJet Pro 8600 Plus touch screen issue

  Hello

  I have an officejet pro 8600 and the touch screen has a very annoying attribute. The touchscreen overlay coincide with the screen itself. On the left side, the overlay is in the correct position, but when you move to the right the overlay gets more and more mismatch of whats on the screen. For example, when the screen is showing a keyboard it is indeed impossible to type a '0' (zero) as 1 mm from the right side of the overlay gives a "9".

  I used to have a windows device THIS old iPaq you rebooted it asked you at each of the corners touch in turn so that he could align the screen with the touch screen overlay. The more than 8600 there any possibility to align the overlay, perhaps with a downloadable application, or am I stuck with not be able to use certain bits of functionality on the printer because the overlay align properly?

  Stuart Watton

  Sorry, but this printer does not have the opportunity to download an application, or align the touch screen. It is more of a hardware issue, and you must contact the Support HP (1800-474-6836). I hope this helps.

• XPS18 Touch screen issues

  I have a new XPS 18, which works well with the keyboard and mouse, sitting in the stand XPS. However, the problems start when you pick them up at the screen and transport it to use in another place away from the keyboard and mouse.  Unfortunately the tactile aspects of the screen just stop working.  I have made sure all updates are installed (drivers Windows and Dell, including the BIOS).  It seems to stop working when you switch from landscape to portrait or to carry the machine.

  This is understandable, it is incredibly frustrating that the whole point of having this desktop/tablet device has been to move and use the large screen in the kitchen or in the living room, with the touch screen.

  If you have any tips please help, I suspect it's more error software than hardware since the work of touch screen perfectly sitting on the stand with the keyboard and the mouse in the range.

  Thank you

  This has proved to be a display of fault and Dell is out and spent for a new screen.  Fortunately, it occurred in the first two months of ownership, so all done under warranty.  No problem since the new screen is gone.

  Concerning

• T440s touch screen issues?

  I have a version T440s FHD touch and noticed that the screen is /ghosting bleeding. IM curious to know how many people have this problem with their screens T440s... is related to a bad batch, or all of them are like that? Could there be a software patch or bios? If this isn't the case, I'm back there for the non-touchscreen version.

  In fact, the colors on my touchscreen FHD T440s are very good. WARNING: no pixel dead either. There is no ghosting or (choice of the wrong words). The only thing I noticed is bleeding it backlight on the edges of the screen when its black... but that disappears in white/color lights. I noticed the exact same thing on my RCA 46 inch full HD TV flat screen... the backlight bleeding when he is black, but it goes away when as soon as the content is displayed. If its really not a problem. View bleeding around the edges is noticeable when the screen is black.

• Sony Vaio made 14A Touch Screen issues

  Hello, I recently bought the SVF14N13CXVB made 14. Once I updated to Windows 8.1 my touchscreen stopped working from time to time. In order to get it working again, I need to activate/disable the driver in Manager of devices or lock/unlock the laptop. I've been through updates, including the touch calibration and gestures as well as the 230 BIOS updated three times to return to factory settings and try again. However the problem persists. Any help would be greatly appreciated. Thank you.

  Hi Cali_91,

  Please try to download the Tool of Calibration of the touch panel and please follow these steps:

  IMPORTANT: DO NOT TOUCH THE SCREEN DURING THE EXECUTION OF THE CALIBRATION.

  1. To ensure that no other program interferes with the installation and calibration run, save any work and close all other programs. The taskbar must be clear of applications before proceeding.
  2. Please follow the steps below to download and run this program.
  3. Download UNOOTH-P0112513-1082. EXE a temporary of the file or download directory (Please note this directory for reference).
  4. Go to the directory where the file was downloaded, and then double-click UNOOTH-P0112513-1082. EXE file using the ClickPad or TouchPad only, to start the calibration.

     Note: Please do not touch the screen.

  5. The screen 'Find a file', click 'OK '.
  6. At the level of the 'C:\Users\Username' folder, click the folder 'Calibration of the Control Panel tool'.
  7. The 'Tool of Calibration of the Panel' screen, click the file "CalibG4".
  8. Once the calibration completed, turn off the computer.
  9. Once the computer is turned off completely, turn the computer on.

  Once the computer is restarted, the calibration is completed.

  Note: If the problem is not resolved, please make sure that the battery is charged at 30% or above and all other devices are detached from the computer, and then run the calibration again.

  I hope that everything works!

  ~ Mark

  If my post answered your question, please mark it as "accept as a Solution.

  http://bit.LY/win-4k

• HP Pavilion x 360-m1-uoo1dx: Touch screen HP Pavilion x 360-m1-u001dx not working windows 8.1

  I had this original laptop with windows 10 of manufacturing and I downgrade to windows 8.1pro since I have to run a prgram that works only with windows 8.1.

  Now my touch screen does not work and can not find a driver, shows no pen or touch input available. I had also checked the Device Manager and see no HID for the touchscreen.

  Can someone please help me with this question.

  Hi @josemillennium,

  Thank you for the results. If the BIOS does not recognize the touchscreen, the pilot would not help because it does nothing to install on. Here's a link to the Computers HP - troubleshooting (Windows, 10, 8) Touch screen issues that I hope will help.

• Major problem with the touch screen after upgrade Windows 10

  I bought a Lenovo Yoga 3 14 "a few weeks ago and upgraded to Windows 10 as soon as I got it.

  Since I started using it, the touchscreen will be occaisionally go "crazy". Crazy is the best way I can describe it because it will start input touch by ignoring or doing his own random touch input on the screen. Nothing the laptop will start to switch between windows and opening and closing of the things.

  This laptop is not running Windows 8.1 long enough for me to know if she has had this problem before the upgrade.

  Any ideas?

  Nice day.

  For information, please see: https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-3-14-inch-Touch-Screen-Issues/td-p/20...

  and then more precisely: https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-3-14-inch-Touch-Screen-Issues/m-p/214...

  I hope this helps.

  Kind regards.

• How to disable the touch screen of HP 23-h027c

  My touch screen is sensitive even to small bugs! Living in a tropical island, this is an inconvinience. So I want to disable the touch screen and use the mouse and keyboard only. How to disable the touch screen? Help welcome. Thanks: Pedro [personal information edited by Moderator]

  Enter the device, as shown in the following image Manager right click of the device touch screen and choose disable.

  

• HP 2310 T have pressure-sensitive touch screen?

  I'm sorry for my bad English in advance.

  I want to know the touch type of HP 2310 T.

  I thought that HP 2310 t optical tactile sensor, but an article it's pressure-sensitive touch screen.

  So I tried to find any comments or videos, but I can't find enough information.

  If you know the type of contact of 2310T Panel, please let me know.

  Thanks for your answer in advance!

  It is optical, uses several cameras, like most of the TouchSmart PC. When you touch the cameras identify the point of contact on the screen.

  See you soon,.

• A1 - set the sensitivity of the touch screen

  Is there a way to set the sensitivity of my touch screen A1. It works but it seems to require more pressure than expected.

  Not really. It is not a particularly sensitive touch compared to most others. You can try to calibrate it and quickly place face down on a table while it calibrates - this could make it more sensitive but less specific. (She also cannot help at all).

• Touch screen on the iPhone issues 5 after SW upgrade 9.3.2

  Hello

  I have an iPhone 5 that I bought just two years ago. The phone worked perfectly despite the fully loaded with applications, images and music. About two weeks ago, I upgraded the software to 9.3.2. Just after that, the touch screen started to work intermittently. When I managed to unlock, it will take seconds of use of the phone before that the touch screen no longer works again. I have to press the button several times until the touch screen comes back to life (only for a short period of time). It's totally unbearable. I can't yet answer phone
  calls.

  I contacted the technical support and all they got me to trying: restart the phone, restore it via iTunes for a backup, give it a new phone... and the problem is always the same. I've updated then 9.3.3 and same thing. I was informed by the technical support that this could be due to a problem with my hardware only made visible by a heavier operating system. Well, it's just not possible. It is not possible that my phone with applications 0 is unable to deal just with the operating system while running smoothly with the phone completely full before the upgrade.

  Someone faced the same question? If so, did you solve it? Thank you

  He Jeinser,

  Thanks for checking out the communities Support from Apple! I understand that you are having problems with the response of the touch screen on your iPhone. I can understand who want to ensure that you are able to use your iPhone, the way that you expect.

  You have already completed all the steps that I would normally recommend to solve a problem with your touchscreen, including restoring the iPhone and set up as a new device. From the information provided, it seems that your iPhone needs to be repaired. The following link should help you get started with the process and has links with additional information on topics such as the warranty and pricing of the service, replacing the battery and express alternative service.

  Repair - iPhone official Apple Support

  See you soon!

• Re Bios Update issues: how to disable the touch screen on the x 360 Pavilion

  I applied the recommended bios update yesterday and now the touchscreen active almost continuously when I do not use it.   which makes it pretty useless mouse too.   I know that HP will release a bios that resolves this problem later, but in the meantime how do I disable the touch screen?

  Thank you google for helping me solve my problem

  http://Lifehacker.com/disable-your-laptop-s-touch-screen-in-Windows-8-1-1588333600

  now can someone let me know once an another bios update solves the problems of touchscreen presented the last of them?

• My touch screen does not work.

  My touch screen does not work. Sometimes, and other times I have to reboot. I restored my phone, but it still has the same problem. Any suggestions?

  The following information is taken from the HT201406 of the Apple KB article:

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If your touch screen responds slowly, inconsistently, or not responding at all, follow these steps.

  Check your touch screen

  Make sure your hands are clean and dry, then try the following steps:

  1. If you have a case or a protective screen on your device, try removing it.
  2. Clean the screen with a soft, slightly damp, lint cloth.
  3. Unplug your unit.
  4. Restart your device. If you are unable to restart it, you can force restart your device.

  If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

  Adjust your settings for tactile 3D

  If you have an iPhone 6s or later that does not properly respond to tactile 3D press, you can adjust the settings:

  1. Go to settings > general.
  2. Click Accessibility > Touch 3D.
  3. Then set the sensitivity of the setting.

  Get more help

  • Find out what to do if your screen does not turn.
  • If your screen is cracked or broken, implemented the repair service for your iPhone or iPad.

• iPhone 6plus iOS 9.3.5 since the last update my touch screen is freezing. Has yet to be decided. Connection to the computer did not help. I had to wait my battery died to restart. Once restarted I could use touchscreen but it now

  Aggravated with the update from my iPhone

  It is a list of the problems I have with my iPhone 6plus since updating to IOS 9.3.5.

  1. A single date after update my touch screen froze and I was unable to trouble or to use until the battery died and the phone has rebooted.
  2. Since this restart my touch screen hangs for 5 minutes at a time at least 5 times per hour.
  3. My screen goes completely black 20 seconds in the reading of an article. I have to refresh my browser at least 6 times by reading an article on the web.
  4. If I'm in iBook I can't read yet a page without the screen goes black. I hit the home back to iBook button try to keep reading where I left off the coast, but within 20-30 seconds it goes back to black.
  5. While I'm typing, even this message, I hit the button of the space and the words are charged or inserted which does not appear. I myself taking much time to type anything bc I have to go back and get rid of the words that the phone has decided to him only to change or insert.
  6. Improvements that never going to this last day f__d my phone. Difficulty what you did in the last updated bc I will eventually lead to an Apple Store and throw the phone home.

  What have I tried to fix it. Everything. For many in the list and you already know what the normal things are that the average person would be difficult it phone. I have no problems until I updated to iOS more recent so caused my problems of telephones you people. PLEASE FIX NOW

  Thank you

  Debbie

  I posted my severe issue with the iphone since the last update August 28, 2016 at 12:27 and watch to see when your system has declared that I posted my question that I call a problem so I guess you can add that to my problems too. OH nothing automatic record is

• my iphone 6 more screen sudeenly Gets a little blurry. touch screen does not

  Hello team,

  I bought the Iphone 6 more. that worked very well the last 6 months but suddenly I see that the LCD is completely blurred. touch screen works not. even when I am clicking on the home button or the sleep nothing works. After clicking the button sleep repeatedly the screen starts to work. It's really me trouble because I'm not able to receive the phone several times. Can someone help me if this is a known issue and what is the solution for this? just a heads up that there is no coincidence.

  Try a Reset: press and hold the sleep/wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears. -Note: no data will be lost