8.1 Windows / VMware 10.0.3 / dual monitor (VGA) / mouse problem

Similar Questions

• Problems with dual monitor: VGA is out only work

  I have a dual monitor card galaxy geforce gf430 who worked on Sunday night before putting the computer to sleep. When I came back Wednesday on the side of the hdmi/vga/dvi vga worked the only possible output. After having checked all the settings and the cables and update of my computer, I had more than one screen. I went out and bought an asus hd 6450 and installed in the hope that I would have my screen. no luck I checked all the settings again and nothing. I ran the program provided with the card and so far nothing. It is not even read a different location for the screen. can someone please?
  Operating system
  MS Windows Vista Home Premium 32 bit SP2
  CENTRAL PROCESSING UNIT
  AMD Phenom X 3 8400 42 ° C
  Tolimán 65nm technology
  RAM
  1.50 GB Dual-Channel DDR2 @ 267 MHz (4-4-4-12)
  Motherboard
  ASUSTek Computer Inc. NARRA3 (Socket AM2) 44 ° c.
  Graphics
  Monitor Non Plug-and-Play generic (1024x768@60Hz)
  ASUS EAH6450 series (ASUStek Computer Inc.) 50 ° C
  Hard drives
  625 GB Western Digital WDC WD64 00AAKS-65A7B SCSI Disk Device (fiber)
  Optical drives
  ATAPI DVD A DH16A3L SCSI CdRom Device
  Audio
  Realtek High Definition Audio

  I took the liberty to do a little research on the ASUS HD 6450 map.  Are - what you got to get the ASUS HD6450 silent and low GPU or the bigger one with the fan?  It might be possible that those silent will not support Eyefinity technology since it was modeled for the home theater PC use.

  I noticed that the model with the fan on the radiator mentions he is compatible Eyefinity, while the silent model does not work, but it allows you to choose between a VGA, DVI or HDMI port, but do not use them simultaneously.

• Dual monitor - really weird problem.

  I posted this same question awhile back, but now I have more information that my fix this.

  Windows 7pro, 24g of RAM, 2 - dual 1 g cards, two 1 TB drives, PS5 64bits.

  GPU - open GL is on, try off, seems not to matter.

  I tried with Zoom clicked point to Center on and outside.

  I tried Zoom Resizes Windows - on and outside.

  Zoom clicked at the central point, and outside.

  I use three monitors - left - 24 "Samsung, intermediate level - 27 '' Dell and right - 24 '' Dell.

  I started with PS and it opens on the right screen.  All my tools, menus, panels... stay on the right screen and the picture is moved from the right monitor to the central monitor. Before I drag the tab to the Middle monitor I can zoom in and move the photo anywhere I want with the hand tool, which is the upper left corner of the photo can be positioned in the center of the screen.  Once I have move tab (picture) for the monitor environment I can not move the picture that he's stuck horizontally and vertically, I can't get any gray area, if full screen and the photo will not move.  I can navigate in the navigator pane, but I can't move the picture around the screen using the hand tool, I can if left in right monitor.  Now if I move things around, using the central monitor for the tool, panels etc and move the tab to the right monitor it still doesn't move.  If I move the rear tab of the average monitor to the right screen, everything works fine.  It's really odd behavior.  I dragged to the left monitor as well, does not work, only in the original window files was launched in.

  Does anyone else have this problem?  could someone please try this, surely someone has a configuration dual monitor.  Thank you.

  Resemble its full screen in test mode hit the F button a few times.

• Windows XP, both monitors. Mouse problem

  When I move the monitor from left to right, I have to move from the upper right to the lower left corner. How can I change this behavior?

  Looks like you have your left monitor configured as the monitor right and vice versa.  All you have to do is to swap their position on the screen of monitor properties.  How to proceed is covered in the section "Organize multiple monitors" in the following Article:

  "How to configure and use multiple monitors in Windows XP"
    <>http://support.Microsoft.com/kb/307873 >

  HTH,
  JW

• Yes or not - is VMware Fusion 3.1 support dual monitors in Windows 7 x 64?

  I want just a definitive answer or no two monitors will work in a Windows 7 64 bit guest.

  I am running 3.0.2 and two monitors do not work properly in Windows 7 64 bit - the second monitor is displayed but I can't drag windows or with the right button on the extended desktop.  This feature works as expected in 32-bit Windows XP SP3.

  EDIT: I refer to the mode full screen. I'm not interested in the unit or any other mode (although, curiously, the unit has the same bug).

  david01010, jrreedy16: two things to check off the top of my head: are you sure tools are updated and installed correctly (for example uninstall tools, restart the comments necessary, install tools) and you have a third party mouse (or other entry) drivers installed in the comments or on the host?

• Discover the problem of dual monitors in Windows 7.

  Hi all

  I have a problem on Windows 7, VMware View on two monitors, I can start a windows 7 Enterprise on two screens (extender mode) but all windows browsers or explorers can be moved easily from one screen to another screen, movement within a single screen is fine.

  However, Windows XP does not meet this problem...

  Anyone have the same problem and how can I solve it?

  My infrastructure: view vSphere vCenter 5.0 5.0 5.0

  Samson

  I've lived the same problem after upgrade to view 5.0 and this is what worked for me:

  http://VMtoday.com/2012/07/lag-when-dragging-a-window-between-monitors-in-VMware-view/

  Adding that the Configuration setting as shown it fixed on my dual monitor configurations.

• Installation of the driver software window opens on the second monitor in a dual monitor extended installation of the monitor

  The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor

  I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.

  The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.

  I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.

  What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.

  I'm talking about a window similar to this one
   
  http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNG

  Try changing the backup.ini

  you find it in

  .. \Program files (x86)\MozBackup\backup.ini

  Open the file backup.ini with editor

  Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights

  Change the value of "1": monitor

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =1

  '2' or whatever the value of your primary monitor is:

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =2

  System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.

• Windows Snap function does not work inside a Setup dual monitor.

  I have Windows 7 Home Premium x 64 fully updated.  So far, it's great. But I have two monitors, 1440 x 900 primary and secondary 1280 x 1024 with the secondary monitor on the right of the main screen. When I try to 'break' a window on the edge of each monitor located next to the other monitor, nothing happens.  I was wondering if it was a typical problem people have seen or if it was just me and if there is no way to do work or if there was a patch for it. (A built-in feature of Google chrome "fit" allows inside monitors). Thanks for your help!

  Hello

  The action which engages a window on the side of a monitor, when you drag a window, is when the cursor comes in contact with the last row of pixels on the edge of the screen. Since there is no physical "edge" where monitors meet on a dual monitor configuration by dragging a window to that location does not work.

  You can always break a window inside edge on a double configuration monitor using the keyboard.

  = Wink left arrow Windows logo key + left key
  = Wink right arrow Windows logo key + right key

  I hope this helps.

  Thank you for using Windows 7 Ronnie Vernon MVP

• Can I install windows 8 on a system dual boot (XP, 7) and keep the dual boot (XP)?

  Can I install windows 8 pro update on a system dual boot (XP, 7 ongoing) replacing of windows 7, but keep the dual boot ability so that I can run the XP apps that only seem to work on XP?

  Can I install windows 8 pro update on a system dual boot (XP, 7 ongoing) replacing of windows 7, but keep the dual boot ability so that I can run the XP apps that only seem to work on XP?

  Yes, you can use the installation of Windows 7 to qualify for the upgrade to Windows 8.

  You can then install Windows 8 on Windows 7 partition and dual boot with XP.

  For reference - if the computer had installed XP you could not dual boot with the help of an upgrade of Windows 8.

  In addition, to back up important data before installing a new operating system is recommended.

• Windows 8 is supported in dual boot?

  Dear sir/maam,

  I use a laptop Dell Inspiron 3520, Windows 8 pro. I want to run Ubuntu using dual boot on my pc. Can I do this?

  If so, how? Please help me as soon as POSSIBLE.

  Thank you

  Sreevamsi.

  Hi Sreevamsi,

  Yes, Windows 8 is compatible with dual-boot. You can install several operating systems on the same computer and the same hard drive.

  You can also see the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/can-Windows-8-run-with-multiple-OS/5c3464bd-10de-4536-95BF-6bb11c9d60fe?msgId=1069a856-a3d3-49B2-A703-e4947ec2dfb6

  For information on how to install Ubuntu on Windows 8 as a dual boot, I suggest you to contact the Ubuntu support forums. You can post the question on the link below.

  http://UbuntuForums.org/

  Feel free to write us if you encounter any other issues. We will help you to come.

• [JS SUI] If you use a dual monitor, how to set the location to see the window?

  If you use a dual monitor, (SUI) window is displayed on the main screen.

  I want to display the window (SUI) based on the location of InDesign.

  How to get location of InDesign?

  Thank you.

  app.activeWindow.bounds will give you the coordinates of the window further in Indesign. $.screens will give you information on the displays. You can use these two properties to deduce the position of indesign.

• I have a Setup dual monitor.  When I paste develop settings from one image to the other, Lightroom going on the active window.

  Strange problem.  5.5 Lightroom.  Windows 8.1. Setting up dual monitor.

  I am processing a lot important photos.  I have #1 monitor set as my main to develop the window with #2 monitor configured only to display a larger version of the image, I work with. If I copy the parameters of development out of a picture and try to paste them on another image, Lightroom will increase from the #1 to the monitor #2 monitor in the main window to develop and does not display anything on the monitor #1.

  If I then try to paste develop settings on another image on the monitor #2, LR then displays a larger version of the image, I have been working with the #1 monitor.

  To work like I want to, I have to constantly drag my develop the window back to the #1 monitor whenever I try to paste the settings on a new image of development. How can I make this stop?

  I have similar (but different) problems dual monitor. Just posted this on my thread unanswered. It may be useful:

  Blessed excrement! After frustrating months of bi-ecrans LR questions and a month of waiting for an answer on this forum, I called Adobe technical support. Only five minutes before dialing, I had updated my PhotoShop CC application. When the useful Adobe tech classmate is online, I can't reproduce all the issues that had been plaguing me. It is a stretch... a biiiiig stretch... but he is feels/figure/seems that PhotoShop CC update has fixed my bi-ecrans LR problems! I'll keep track of what other programs I use and open while LR - ing to see if they are relaxing, but for now, everything is quite in front of two monitors.

• How to install dual monitors in Windows XP?

  Original title: I have more xp dell. Two monitors. A video card plus double the original video card. How can I get my TV wired to computer with s-video plug in? Thank you

  I installed the dual video card. I got hooked tv before but unplugged & cannot get hooked again.

  Hi Ben,

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you cannot configure both monitors. Please let me know if this isn't the problem that you are experiencing.

  Before troubleshooting, I have little information on the issue.

  Did you of recent changes to the computer before this problem?

  Try the methods provided for in article below and then check after each method:

  Setting up dual monitor:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=1bZqH23uobu

  If the problem persists, post your reply with results and questions above. We are happy to help you with the advanced troubleshooting steps.

  It will be useful.

• Dual monitor problems / external

  I recently bought a netbook NB200/007 and want to use two monitors (mainly for display of pictures etc on larger screens)

  It came preloaded with Windows 7 starter, after having found that the Starter edition did not support dual monitor that I've upgraded to Windows 7 Home Premium, but I'm still not yet to make it work.

  When the external monitor is connected, the netbook picks it up and sets up two monitors, but the external screen does not light (it remains in standby mode) I tried several different resolutions and also tried to use the external monitor as a single screen by selecting the option to have it as my main screen.

  If anyone has a suggestion of how I could get it to work, I would greatly appreciate.

  Kind regards.

  Hi puma325,
  install the 'value added package.
  This will add some features like "Fn + F5" for switching the display...

• HP Compaq dx2000 format Microtour - upgrading graphic support dual monitor?

  Hi, I have a question about the HP Compaq dx2000 format Microtour. The link to the form is here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&ContentType=support...

  I was asked to provide a solution for this machine that will support dual monitor. Can someone tell me please on a possible graphics card I buy (probably second-hand) that will be compatible with the motherboard on this machine and will also support dual monitor?

  Thank you very much!

  Paul

  Hello:

  If you only run XP and don't have no plan to upgrade to Windows Vista or Windows 7 and just VGA (not DVI) output, this PCI video card should work for you, and your machine has only PCI slots.

  http://www.eBay.com/ITM/PNY-nvidia-fx5200-Dual-VGA-DDR-256MB-video-card-PCI-/160704820819?PT=PCC_Video_TV_Cards&hash=item256ac0f653

  You will need to read the installation manual on the support page and the driver of your PC because I believe that you need to change a setting in the BIOS to the PCI card to the video card main.

  Or you can search for a similar PCI card with a DMS-59 output with video split cable that goes to two monitors.

  Paul