8620 pro: 8620 pause printing

Similar Questions

• My HP Officejet Pro 8600 cannot print from my MacBook Air

  Hello

  My HP Officejet Pro 8600 cannot print from my MacBook Air. It keeps on showing "the printer is not connected", but the display on the printer connected. I often reset the printer "EVERY TIME" I want to use. I also tried to turn off my laptop and printer several times before printing. If I'm lucky, it will work maybe for one or two prints. If no luck then I have to reset everything again. Sometimes I reset the printer, the printer is not displayed on my selection.

  Hello boojoo1tw,

  Welcome to the HP Forums!

  I understand that you are unable to print most of the time with your Officejet 8600. How is the printer connected? USB or wireless? What is your operating system on your Mac computer? Click here to find out.

  If your wireless printer, then I recommend the award of an 'IP address' by following this HP document on printer does not maintain the wireless connection.

  Please post your results, I'll be looking forward to hear from you.

• HP Officejet Pro 8000 Wireless: Download for Officejet Pro 8000 Wireless printer driver

  I've been looking for a printer driver download for my HP Officejet Pro 8000 Wireless printer, but unable to find one and the web page keeps just leading me in circles.  I'm under IE 9.0 and Windows 7 Professional.  Could you give a link to download the driver?

  See this:

  http://support.HP.com/us-en/document/c02266980

  or

  http://support.HP.com/us-en/document/c02693964

• How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?

  How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?  I'm running on Windows 7 64 bit.

  It's strange.  Looks like you have a second paper tray and put it to the default tray.  The second paper tray only supports the types of paper that show on your list.  It's strange because unless you have purchased a second tray paper, plus model has one.  Does only the high-end model.  Other than that, only certain types of media can be duplex, so if you have double-sided printing, it can limit the selection.  I'll watch what else could be the cause and get back to you.

• HP LazerJet 200 Color MFP M276: My HP Pro 200 MFP printer is printing a magenta background

  My HP Pro 200 MFP printer prints magenta background.

  I replaced the ink cartridge and clean the rollers in the printer.  It works very well at the moment.

• OfficeJet Pro L7590 can print but not scan

  My printer (Officejet Pro L7590) can print and copy correctly, but the scan function - that has worked well at the same time - has just up and stop working, and my attempts to solve the problem simply go round.

  • When I try to scan using the button start scan on the printer, I get an error message saying 'no scan options '.
  • When I try to open the solution Center, it is said that he cannot run because the installation is not complete.
  • Uninstalling and reinstalling the software (latest version, which is three years, downloaded from the HP website) do not work. The software seems to go through the process of installation very well, but crashes on the stage finish ("product configuration"). Eventually it times out.
  • Once in this case, the installer downloads a supposed solution of the HP Web site. He told me that it is fixing the problem and asks me to restart the computer, saying it will continue after the restart. After I restart, the procedure does not continue, and the problem is not fixed - all the behaviors I describe above are still occurring.
  • Also downloaded one file with other solutions supposed to this question. They do not work. For the most part, they are variations on "run the setup software again", preceded by various other measures. However, when I do this, it re-not installing - it is a completely different window, and if I try to go back to the installation procedure, he refuses, telling me the software is already installed. (And yet when I try to open the solution Center, he always tells me it is not installed.)
  • Tonight is the third time I tried to troubleshoot it. On three occasions, I just gave up in frustration after a few variations of the cover above.
  • I'm this end =><= to="" going="" all="" office="" space="" on="" this="" printer="" and="" getting="" a="" new="" one="" based="" on="" the="" abhp="" principle="" -="">Anything But HP.

  I can't emphasize enough that it worked in the past and this basis still printing very well (with the exception of some strange problems with certain PDF files), but scanning has broken since my last round of hardware upgrades and refuses to be fixed.

  It's incredibly frustrating. Someone just make it work with minimal BS, as he has done before.

  I realize, this is a follow up very, very late, but apparently the problem has something to do with the 32-bit version of Windows 7 running. I recently installed the 64 bit version and now have no problem with any HP software.

  Well, except that sometimes he asked my permission to do an update then fails to actually download the update (I get the same "could not connect to content url" error message that many others reported here).

  Other than that, which is slightly annoying, but doesn't really affect what anyone, everything works fine now.

• MS Office 2010 Pro and my printer does not work,

  I just installed MS Office 2010 Pro and my printer does not work, I tried to print a test page for the printer, but that prints either, ask if I want to troubleshoot the printer and when I click on Yes, I get a message that there is a problem of ActiveX.  The printer will not print not any application, but it worked before installing office.
  All the apps work except in order to print it.
  I am running WinXPPro w/sp3.

  Jim K.

  Hello

  1. What is the exact error message?
  2. don't you make changes on the computer before the show?
  3. What is the brand and model of the printer?
  4. this problem occurs with all files that contain the Active X objects or specific file?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  Try the steps in the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:
  

  This problem occurs if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry : how to back up and restore the registry in Windows

  a. Click Start and run, type regedit.exe, and then click OK.

  b. expand the following registry subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

  (c) in the right pane, right-click 1200 and then click on edit.

  d. in the value data box, type 0. Then, click OK.

  e. close the registry editor.

• HP OfficeJet Pro 8600, HP printer wizard installs not when the software is installed from the CD

  HP Officejet Pro 8600 e printer all in one

  Windows 7

  I had Assistant printer installed and working on my computer at least a year, then there was an update and it no longer works.

  I uninstalled the device and the software and reinstalled both on-site and directly from the CD without success.

  The only error I get is when I start everything first install it and there is a red "x" next to the update of windows.

  The installation process ends, the computer will recognize the printer and I am able to print but I have no control any function because none of these options in the wizard for the printer are turned on.  They are all grayed out.   The most important thing I need is the archiving of received faxes.

  Someone else in my family had the same problem, but was able to reinstall from the Web site and doesn't have any more problems.

  Thanks for any help.

  Hi liluno18,

  I want to help you with this question. I send you this link to the Microsoft forum on how to fix the red X on windows update. Follow the response from Joseph M.

  So I suggest you do a complete uninstall software of the JO 8600 and reinstalling the software once you have windows update works again.

  Let me know if you need help, I would be happy to help you.

• HP Officejet Pro 8600 Plus: HP Officejet Pro 8600 Plus printer-

  HP Officejet Pro 8600 Plus printer-

  Tried to copy both sides of a vehicle using ADF permit; paper too small (stupid user!); he copied the first side successfully. Now, I can't find the input document! How can I remove paper (which I can't find) which was too small for the auto feed?  It is not in the duplex unit, either.

  Hi @Dick_27,

  Welcome to the HP Forums!

  I appreciate that you try to remove the paper in your printer more HP Officejet 8600. I'm sorry to hear that, but happy to help!

  Please have a look through this guide, A display of the "Paper jam" error on the HP Officejet Pro 8600 e-all-in-one printer series.

  As well as this guide. The ADF (ADF) documents didn't pick up paper.

  I hope that these guides are useful and have a nice day!

• HP Officejet Pro 8000 Wireless printer: Always be streak on copies vertical white

  HP Officejet Pro 8000 Wireless printer: Still get a vertical white streak down the photos. I changed the yellow/black printhead. Only one aid note said I should try to clean the scanner glass. Where is the scanner glass, and how to do for her?

  Other options to get rid of the vertical line?  Thank you.

  Hello

  It sounds like a problem with the printer itself, because it is indeed a vertical GIS. A cartridge problem would cause a horizontal issue. You can tru is the cleaning of transport, stem from the metal bar that you see in the printer, and carefully clean the Strip transparant. This with a lot of attention that its rather delicate and if it breaks the device is ready for the trash.

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• 8600 officejet pro to only print in black and white only

  How can I configure my 8600 officejet pro to only print in black and white automatically so I don't have to authorize whenever I print?

  Hi Andrewbono,

  You're welcome, I'm glad we were able to fix everything together!

  If you feel that one of my suggestions brought you a solution please feel free to mark it as an acceptable Solution to facilitate advice for others to find.

  Whatever it is, it was a pleasure to work with you and wish you a great week

• Cannot install hp officejet pro 8500 A909a printer using a disc. Get error "error-windows 7. hta is not a valid win32 application".

  Receive this consignment of error when you try to use a CD-ROM to start re - install hp officejet pro 8500 A909a printer.

  Error-windows 7. hta is not a valid win32 application.
  Help, please
   
  Original title: 64-bit Windows 7 pofessional

  Hello

  1 are you getting this error when trying to install the drivers for the printer from the CD?

  2. what exactly is the problem that you are facing with the printer?

  This problem may occur if the files on the CD are corrupt. You can download the current "Full Feature" software and drivers from the HP Web site at: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=3752456&

  You can also contact the HP support forum to get help:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3752456

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Bought HP Laserjet Pro 200 color printer & unable to connect

  Bought HP Laserjet Pro 200 color printer & unable to connect to my Windows 7 laptop. The printer setup was a snap, but no connection. Tried all Windows resources, but...

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• HP LaserJet Pro M251NW Laser printer

  Hello

  Quick question (v5.5) HP Universal print driver will work for HP LaserJet Pro M251NW Laser printer? I can't find it on the list of compatible printers, I guess because I think it is quite a new model.

  Kind regards

  Ross

  You can try, but I don't think it will be.  It seems that this printer will not work with PCL 6 languages and more.  It looks like version 5.5 running PCL 5.  the next version to the top (point 5.6) should be able to run it.  I'll link the UDP protocol which is compatible with the printer below.

  HP for Windows PCL6 universal print driver